Read the full written review here: wp.me/pa1fv-bl2
Пікірлер: 219
@nrulesxd9 жыл бұрын
FINALLY! A good review on this beautiful turntable. Helped me a lot!
@aslanyo9 жыл бұрын
Glad you guys got this guy. I know he's a veteran by even mentioning the "dead spot" on the 1200 pitch adjustment around 0. Pro!
@aslanyo9 жыл бұрын
***** which 1200 had the dead spot?
@matthewkoslicki36643 жыл бұрын
well, i'm sold then, i sold my 1200's 15 years ago, and after a relapse of life, i'm back in the djing game (all be it the digital world at mo) i'm craving to get back on vinyl, but the cost of some technics 1210 or 1200 MK2's is frightning!! especially when the parts are getting so expensive too. think i'll give these pioneers a go, i love these reviews because they are so to the point and true, between you and jamie hartley at crossfader, i haven't made a bad purchase yet!!!!! TOP WORK!!
@paulboyce85379 ай бұрын
How did you go?
@christiegurganus2548 жыл бұрын
I'd also like to add that I found this review/video very informative and helpful and have not visited this channel before now.
@danhealy799 жыл бұрын
Great review! I had sold my M3Ds back in early 2000 to help pay for some text books I needed for college. I am looking to get back into spinning and these look pretty damn cool (and don't cost as much as trying to get back the M3Ds).
@xenologyrecords7727 жыл бұрын
I proudly own a pair of PLX-1000 turntables, after owning 1210s for many years. I have been DJing on them constantly for months now and can honestly say they are the best thing I have bought since buying new decks all those years ago...pitch control is very accurate, the wow and flutter, due to a typo in the spec sheet, is actually 0.01, which is the same as Technics. The torque, platter and tonearm are excellent to use, one tonearm on one turntable, slightly and I mean slightly rattles with bearings, but it is no bother, as the sound is still really excellent, as is the tracking, as they say, better a tad loose than too tight...you can scratch at any point of a record and nothing phases it, and no vibration either, i love them, only thing i would have maybe waited for is the new Denon VL12 prime, which also looks excellent...i can't fault them
@FSwiftDJ5 жыл бұрын
I would like to listen to your mixtape or set using them compared to your older technics DJ mixes , I've had these plx1000 and they are complete crap for mixing vinyl on, not even close to old technics turntable
@djsubculture27864 жыл бұрын
So how are your PLXs holding up? specifically the pitch?
@djsoxy12493 жыл бұрын
Are they good for actual mixing? like holding in the mix for long mixes?
@pauldagger83023 жыл бұрын
Same as you in respect to having Technics for the most part of 20 years, I’ve never been afraid to try new turntables, and having had PLX 1000’s for three years now I can safely say they are far superior to any pair of techs I owned. They hold a mix perfectly and just as importantly they are aesthetically pleasing to look at. No complaints from me.
@meganoid_9001 Жыл бұрын
I've bought a PLX 1000 and I've compared them to my old SL 1200 MK2. While aesthetic and torque of the former are unvaluable, I must say that the precision of PLX 1000 is lower than that of my old MK2. With the term "precision" I mean two things: 1) Wow & Flutter of PLX 1000 lies between 50 and 100 percent more than that of MK2, based on comparable measurements (whose absolute value might be debatable, but the relative on is undoubtedly fair); 2) Pitch granularity is finer on MK2 than on PLX based on the ability to match a precise beat sampled using a digital metronome. Conclusion: I am up to sell my PLX 1000.
@huntsmanbaits21116 жыл бұрын
Thanks for a informative and detailed review, after 25 years of mixing house music ive hung up my white gloves and im planning to get some vinyl turntables to mix hip hop and master the art of scratching. Do you think they would be as good for that as the Technics? I like that they are heavier for even better stability but i think when it finally comes down to it i will end up on eBay buying old MK2's but this has deffinately made me consider going and testing the pioneers before buying, but i had this battle 20+ years ago with the amazing turntables vestax used to sell but i still always chose technics back then!
@ashleycox4329 жыл бұрын
How would you describe the surface noise of this turntable when playing back? Thinking of buying one with a nice cart as an audiophile turntable, rather than for DJ use. Is it nice and quiet?
@DjDestinyChicago5 жыл бұрын
I unfortunately sold my 1200s years ago. If any of you have these.. would recommend them or pick up a used pair of 1200s? I’ve been really wanting to get back to vinyl. DDJ-SX2 isn’t fun anymore.
@BudiSetiawan-id9en6 жыл бұрын
hi mojack, pitch control are harder to handle compare with 1200, same thing with the rpm, the rpm jump and down when turning. please give a review regarding pitch control and the rpm stability.
@madgreek688 жыл бұрын
Great review,buddy is very honest,he explained exactly what i was looking for :)
@jamesmichael25346 жыл бұрын
I wonder is the newer made technics are as good as the ones they made before they stopped production? My stanton t92 has had issues with the rca ourputs ever since i got it couple years ago.
@Strfanopita3 жыл бұрын
@DJTechTools Cool video thanks! How would you compare this turntable to Technics MK7??
@AztekDJ9 жыл бұрын
What I don't understand is if all these other turntable companies are still producing turntables and even bringing out new models, why hasn't Technics responded by bringing back into production the 1210 Mk2, which was the best selling turntable they produced..!!
@Mr.GoAround6 жыл бұрын
Because they've stopped making turntables
@djxsquizit5 жыл бұрын
WAS is the key word. DJ controllers took over the DJ game
@yarna19764 жыл бұрын
I believe they are very expensive to make so would attract I hefty item price
@Dancefmlivecom4 жыл бұрын
@@Mr.GoAround they only stopped because Vinyl was dieing
@MegaGronis4 жыл бұрын
I don't know. Have a Technics SL-1210-MK7. Got it 2 weeks ago but have no Cartridge yet. Vinyl sounds better than CD or USB for that matter or any digital shit. Have 250 Vinyls.
@thehilders8 жыл бұрын
I am going to hold on to my Technics for sure
@spencermacdonald87217 жыл бұрын
so would you get the plx1000 or st150 or reloop rp7000
@RealDJblaze9 жыл бұрын
MojaxxVDJ Excellent Review fam! Mine just came in yesterday...
@augustburnsorange17483 жыл бұрын
do the dots stay absolutely steady? ive had problems on previous turntables where the dots would wander back and forth.
@kevinkramer43109 жыл бұрын
Beautiful Turntable
@dylanparker97885 жыл бұрын
What about sound quality? I heard theres a lot of feedback...
@DanielMartinez-ir4pf8 жыл бұрын
out of the 3 what one do you like better?
@darellhackett1056 жыл бұрын
Hi Cris do you know how good is the Roland TT 909 turntable is I am Linzy for Trinidad
@alexkay55845 жыл бұрын
I also have a pair of PLX1000's, they are an excellent turntable and I can't say anything bad about them. I think the main problem is Technics(Panasonic) made such a good turntable, it was difficult to surpass the experience of using one. The problem being the new Technics are very expensive and parts for second hand 1210's are also expensive. My only problem was I bought Reloop Concorde needles which were rubbish, these have been replaced with Shure M44G Carts which are excellent.
@paulboyce85379 ай бұрын
My view is that year 2010 when Pioneer gained the blueprints for the Technics there was a jump in quality. The 2014 PLX 1000 doesn't follow these Technics blueprints other than outside appearance. Pioneer completely redesigned the turntable. It has nothing extra. All that matters is functionality and high quality sound in a pretty appearance. Power, silence, sound quality. No gimmicks. Only PHONO out for the best quality sound. There are teardowns videos that can be compared and the PLX 1000 is a very simple and rugged construction making it an easy and cost effective to service. Compared to Technics that is claimed to be a technicians nightmare and very cheaply made ( go figure total U turn what you usually hear). For some reason all of these being Hanpin TT's the Technics sell by the name and what I can see the Pioneer is better quality yet so much cheaper. Technics seems to follow the old concept even that they are different from model to model but there are lot of Frankenstein TT's put together using whatever was available and yet you could mix and match different models. That makes buying second hand a bit risky. To me it also tells that whatever changes were done to the TT's it wasn't a day and night change that makes me question the pricing. The point I'm trying to make the Technics from 40-50 years ago were a Rolls Royce. The same table today is Audio Technica. Today there are so many new and improved TT's on the market that cost lot less.
@slazoulos7 жыл бұрын
Great review!! I was thinking of buying the Audio Technica AT120Lp but now im considering buying the pioneer plx 500. Any thoughts? I read many reviews of the AT with many issues. I'm not a Dj i just listen to records.
@xxfocusstxx6 жыл бұрын
Laz kang this is exactly what I want as well,as I enjoy listening to my records and my current turntable is old and don’t want to invest in shit,then piss around finding a decent stylus!
@ichoose2bhappy8 жыл бұрын
Can I connect directly into a receiver if I just use it at home?
@paulboyce85379 ай бұрын
2014 the TT was sold as 13.1 kg. 2022 the manual gives 14.6 kg but I just bought the PLX 1000 year 2023 at 15.5 kg (dust cover and rubber mat on). No tonearm loose bearings and platter wobble is hardly noticeable fraction of 1 mm. So in reality perfect. The weight does puzzle me. Seems that there has been improvements as lot of reviews always point to the rubber matting of the Technics even that the power and electrics are not shielded by this matting. Pioneer does have a heavy matting inside under the tonearm that has a function considering the placement of the power/electronics but maybe the Pioneer has improved this to add more weight (or the weight was measured different with or without the platter, dust cover, rubber mat). I don't know and won't pull it apart to see either. But the TT is in very high quality. I would get the PLX 1000 before the Technics SL-1200GR for example. I think you get a better TT plus you save a crazy amount of coin.
@cgambarrotti7 жыл бұрын
What about the sound quality?
@andreasleonlandgren30925 жыл бұрын
Do you think a 2000 technics is as godas 1200?
@civ1420009 жыл бұрын
In other words IT'S A TURNTABLE!!!
@Ziggy_v23 жыл бұрын
Curious- if you compare the new Technics 1200s MK7 to the PLX-1000. I would think the PLX would come out on top. The MK7 feels a little cheap.
@BeardedRC7 жыл бұрын
Hey can you do a compartment with the Pioneer PLX-500-K with the 1000 and sl1200
@omarchapa8247 Жыл бұрын
I have gone through two PLX-500. Platter just stops spinnning. Looking for Tech but might consider Plx- 1000. Motor gives out quick on 500
@Strfanopita3 жыл бұрын
Great video many thanks! Does anyone know if the Pioneer PLX-1000 have a reverse function? Maybe via internal settings or something? Seems to be the only thing missing... Thanks!
@DiscosOlvidados Жыл бұрын
it doesn't
@kruno854 жыл бұрын
Background track ID? Someone..
@tylon29993 жыл бұрын
I have had one for about 4 years now and other than the pitch lock they seem comparable to my 1210's with one exception the finish has started to wear off the edges of the top face plate. I have had my 1210.s for well over 3 decades and they look like new.
@PurpleGoril49 жыл бұрын
What about feedback from plx1000 I saw review where guy actually open one and ok its not best Pionner can do but the biggest problem was a massive feedback.... Any opinion on that please ?
@alexkay55845 жыл бұрын
I have seen the same post on KZfaq and it put me off for a while, in the end I bought a pair and I do not encounter feedback and the metallic finish on the Pioneer PLX1000 is excellent.
@peterduris83146 жыл бұрын
Hi, this Pioneer PLX-1000 is Made in China or original Made in Japan? ...nice turntable of course...
@CSdjcdog8 жыл бұрын
I've been djing for over years,Technics 1200's are the best but the Pioneer PLX 1000's are a very close second I own a pair of both the 1200's are retired,but I bang the hell out of the PLX's I just love them
@god63848 жыл бұрын
why is it the best?
@paulboyce85379 ай бұрын
Placebo effect towards Technics. Nothing new. I get it it is what you are use to. But in all seriousness the PLX 1000 has been improved in every way compared and yet lot cheaper. Technics sells with name only and you are a living proof of that. Once you had the Pioneer a bit go back to the Technics. That's where you can find the difference and you would just have the sentimental value left.
@Dancefmlivecom4 жыл бұрын
whats the weight ? is the pioneer like the technics like the old days. you could through a 1210 off a building and it'll still work
@saviodesilva79332 ай бұрын
Iirc the plx1000 weighs more than the 1200
@Dancefmlivecom4 жыл бұрын
How heavy is it? - anything like the old Technics 1210's Mk2
@iamdyre4 жыл бұрын
A bit heavier actually
@UrbanLikwid9 жыл бұрын
Have you started seeing this as the new standard when playing at the clubs over there in Europe?
@Ziggy_v24 жыл бұрын
You should do an update video on this - Technics 1200 MK7 cost $999 and the Pioneer PLX-1000 is now $599 - would you spend an extra $400 per table for the Technics name?
@svenschwingel86323 жыл бұрын
The Mk7 has the better motor and a somewhat more robust tonearm. Super OEM tonearms tend to bend quite easily during DJing. But that's about it. If I had the cash to spend, I'd get the Technics. If I were on a tight budget, I'd get myself a Reloop 7000 Mk2. If I were looking for something to integrate into a home HiFi setup, I'd get the Pioneer mostly for its looks 🤷🏼♂️
@pauldagger83023 жыл бұрын
@@high_fidelity_stuff you should ask all the DJs playing super clubs…. Andy C @ XOXO for example; how’s that feedback working out. You believe what some guy on youtube says, and disregard what is actually happening.
@6Rhyme Жыл бұрын
@@svenschwingel8632 reloop rp7000 mk2 have ground issues on the external phono in put its not for the hifi use
@svenschwingel8632 Жыл бұрын
@@6Rhyme how can it have grounding issues when it's not internally grounded?
@Jean-LouisMayans8 жыл бұрын
hi friend, what stylus do you recommend me for the pioneer?, dj purpose, thx for posting !!!
@draynged78697 жыл бұрын
Shure M447
@Jean-LouisMayans5 жыл бұрын
Ortofon Is great
@DjTecniq8 жыл бұрын
But don't the Pioneer's have added pitch ranges unlike the original Technics 1200's or any Technics model below the M5G's. Would of been helpful to mention. Great review otherwise :)
@luvinart72407 жыл бұрын
Is the face plate metal like the technics or are they plastic like the PLX - 500?
@draynged78697 жыл бұрын
Its aluminium die cast
@dmgsoultogetherness666711 ай бұрын
great review...as a 3rd deck for lounge chillin...is it made of hard plastic or the heavyweight material of the 1200t
@christiegurganus2548 жыл бұрын
First off I own a technics. Yes I am a lucky girl. It needs a friend and suffice it to say I cannot find any bad PR on the PLX with any substance to back it up. Yet instead find 40+ years of workmanship cum loyal ownership of pioneer decks of all grades. I'm buying the PLX for just around $630 thru an authorized dealer and feel way smarter than dropping coin on another technics.
@DJJackieChoi6 ай бұрын
I owned MK5 but now I am getting to buy new turntables between SL1200MK7 and PLX-1000. which one should I purchase between these 2 nice turntables?
@djwise8085 ай бұрын
I have the same doubts 😅
@nicksh78533 ай бұрын
PLX1000 is solid than mk7. mk7 sounds like a empty pot and feel cheap @@djwise808
@djcrazycuts67185 жыл бұрын
I'm seeing videos, where only the turntables have been described but, not thoroughly demonstrated. Especially on the mixing aspect, and those two second - so called "quick mixing/track dropping", doesn't count. I would like to see any of those turntables be demonstrated, and tested to the fullest. So that way people can get a better understanding of the way each turntable works.
@TampaRedd9 жыл бұрын
Has anyone mentioned that these are heavy as hell! I messed with one in the store and it was like a cinder block! I can't imagine 2 of these and a mixer in a flight case, it'd be a 2-man lift for sure!
@TampaRedd8 жыл бұрын
+analher what vid is that, I'd like to see it? I'm still rocking the same 1210's I've had since '97!
@THEOPHILOJUNIOR8 жыл бұрын
Review: Pioneer PLX-1000 Turntable, Comparison to Technics 1200
@coydog79026 жыл бұрын
Is this a good living room turntable?
@juliobeltran35125 жыл бұрын
Probably overkill for a living room, especially with respect to price.
@theElvin_T8 жыл бұрын
how are you not even going to address the pitch fader in a review/comparison/contrast w/ the 1200?
@jeffreysantner37176 ай бұрын
Would you recommend the 500 as well?
@nicksh78533 ай бұрын
nope. 500 is so cheap.
@xtraflo8 жыл бұрын
Those would look great next to your Pioneer CDJ. You'd also look like a sponser.
@davidthom7127 Жыл бұрын
Do you know if the plx1000 has an inbuilt phono amplifier ?
@6Rhyme Жыл бұрын
No
@davidthom7127 Жыл бұрын
@@6Rhyme do you know who does know ?
@THEOPHILOJUNIOR6 жыл бұрын
would rather buy a pair of Turntable Pioneer PLX-1000
@arcturusbbqsausagemaking24355 жыл бұрын
There's is a plx -1000 by me for a $100 that seems way low on the price it needs a needle cartridge does anyone make knockoffs of these tables it looks exactly like the one your showing is there anything I should look for The guy said he can let me here it play with another cartridge but I will have to buy my own
@dimitrisdimopoulos1851 Жыл бұрын
I want to ask. Finally Which is better pioneer plx 1000 or technics?
@tek00732882 Жыл бұрын
Technics SL-12x0 mk2 is better. Although PLX-1000 looks more modern.
@Aintry19 жыл бұрын
The March 2015 issue of Stereophile gave a glowing review of the PLX-1000. But even the Stereophile reviewer felt compelled to have his tech buddy tighten what the reviewer called the "way loose" tonearm bearings. Pioneer, I charge for servicing and repairs. If you want me to fix your turntable for you, I expect you to deduct my labor costs from the asking price for your product.
@krolkoolmarek707411 ай бұрын
The différence between Technics SL 1200 and 1210 please?
@nicksh78533 ай бұрын
The SL1210 is the black version and the SL1200 is silver
@Gas1955 жыл бұрын
Technics for life!!!!
@6Rhyme Жыл бұрын
Pioneer Plx1000 rules
@thehunterofdeath21805 жыл бұрын
I like the pioneer 1000 plx they are great turntables it feel like the 1200 technic i felt like home is good for tuurntablelist too for any DJ i like them very good truntable n the price it's not bad at all all battle DJ use it n they like it too like qbert mix master mike n other
@djbodhi57937 жыл бұрын
I had the 1200 mk2 and 1210 mk2 and 1210s m5g and I bought a pair of the plx1000 and OMG the best TT I have ever own all around built like a tank , I'm not hating on tech
@alexsanchez36354 жыл бұрын
D J Bodhi So do you Recommend i get them,Ihave a pair of mk3 i bought used in Japan but its fucking up,Got them repaired and still fucking up so i said fuck it,Im looking into something new,
@backndadaze19904 жыл бұрын
@@alexsanchez3635 did you get the plx 1000s ?
@alexsanchez36354 жыл бұрын
Anthony Vega Yeah
@backndadaze19904 жыл бұрын
@@alexsanchez3635 I'm getting them for mixing ,I heard they are as good as the old 12mk5..is that true
@alexsanchez36354 жыл бұрын
Anthony Vega I have them ,and there built Solid ,the Pitch Fader gets a little getting use to ,but when you do ,its a Good turntable.I have a Technics Mk3D next to the Plx1000 and have been doing Good sets
@darrentanner62457 жыл бұрын
Any chance of a plx 500 review?
@virgilwilliams80829 жыл бұрын
If It don't have reverse, or braking adjust how can it be a super OEM turntable.
@deanydextreme9 жыл бұрын
Do not for get to ground them for also ground with a shielded ground wire also use Monster RCA Wires.
@jackofalltradesmercury2074 жыл бұрын
I like the Pionner turntable. But i want it to have a line in.
@oscarnorthington40939 жыл бұрын
I heard it has a serious feedback.
@jorgevasconcelosmadetomove8 жыл бұрын
Oscar Northington who said that ? where you hear it?
@SinnerSince19625 жыл бұрын
Where is this manufactured? Japan or China?
@dedycaturwicaksono63845 жыл бұрын
Japan
@KINGSHILOH37 жыл бұрын
Hands down the Denon vl12 is the TRUE Winner.
@ninjabluewings4 жыл бұрын
I can not honestly see one of these Pioneer turntables out living the LEGENDARY! standard, main reason is Pioneer is a mere shadow of what it once was, ever since the script style changed on Pioneer they have been nothing like the old stuff and let's be frank about this hardly anything made these days lasts as it's made to a price and not to a standard like things used to be and there is no way on this earth that a Pioneer made now is gonna still be spinning in 20-30 years time like some of these Technics are
@irritablysavvy9 жыл бұрын
Glad I bought my 1200M3Ds over 10 years ago for $399 a pop.
@badrap55668 жыл бұрын
+Night Elektron you sound really happy about it.
@TC-zi2yp7 жыл бұрын
The Bright Pixel does a great review on these, including disassembling and looking at the internals. These are nothing special.
@draynged78697 жыл бұрын
That dude is full of shit and lied about the reverb feedback Mojaxx did the same test and that didn't happen so please, not to mention I looked into it, Tech repairs is all soldering, where as the Pioneer is unplug and swap out the part, please do research on an item before throwing it under a buss, these were used in the Red Bull #3 style 2016 and preformed outstandingly!
@madmanmoz63655 жыл бұрын
The Reloop RP7000/RP8000 MK2 are is the closest your going to get to Technic SL1210's. The RP range have higher torque and morw feathers so even better and the best thing about is a pair will cost just over £1000 for the 7000's or £1200 for the 8000's. Its a no brainer.
@6Rhyme Жыл бұрын
Reloop rp7000 has ground issues and its hums on the external preamp what a shame
@paulboyce85379 ай бұрын
@@6Rhyme PLX 1000 refined from Reloop and step up. Only PHONO out so no problems.
@6Rhyme9 ай бұрын
@@paulboyce8537 True thats why i have the Plx1000 👍🏼
@trancevoyagesessionsАй бұрын
That’s not true though. PLX is much closer in terms of build to the Technics.
@marcello4258 Жыл бұрын
Needed to sell my mk2s (as we call them rather than 1200 here) 10 years ago.. now I am not willing to pay 1 grand for technics looks like an amazing alternative so far
@sandynuvo7846 жыл бұрын
Made In Japan ? or China ?
@dace0029 жыл бұрын
no word about the sound quality? what can you say?
@inthe7thhouse9 жыл бұрын
Sound is amazing! I got the low end of the Concorde carts and the dynamics are just to die for. Of course, if you have a crappy receiver, speakers and speaker wire any high quality turntable is gonna sound lousy. Good test albums for sound are West Side Story soundtrack and anything by Henry mancini. :)
@Aintry19 жыл бұрын
inthe7thhouse How does this thing track? I have to do archiving, and sometimes the records have pretty bad warps in them. I'm not real confident about the ability of these heavy, S-shaped tonearms to stay in the groove under adverse conditions.
@inthe7thhouse9 жыл бұрын
Aintry1 This is a Dj table, designed to be put through lots of punishment at clubs. If you use the Concorde carts, this TT will ride those grooves like a pro surfer. I can't guarantee that with a regular box-shaped cart.
@Aintry19 жыл бұрын
OK, thanks.
@OgDj202411 ай бұрын
👍🏾
@hangover20008 жыл бұрын
I really want the new techs but i'm not dishing out $8000 for a pair. that's a lot of money that could be used for music or maybe a nice vacation lol. I love my 1200's and the new plx's I got.
@23lnp7 жыл бұрын
hangover2000 are the plx's any good ?
@VoyageOne18 жыл бұрын
The requirement of ground connection and higher price compared to the competition was bit of a deal breaker for me.
@TheOlavarria499 жыл бұрын
Over priced but of course is Pioneer. If there were $499.99 I might go for it. But no, thanks...A good solid turntable at a good solid expensive price. Bah!!!
@paulboyce85379 ай бұрын
I would match the PLX 1000 against SL 1200GR even that the Technics is 3 times more coin. Pioneer has an excellent sound quality for the audiophile.
@orbanoptimodlatinoamerica41158 жыл бұрын
Las copias siempre seran copias, TECHNICS SL 1200 MK2 THE BEST SINCE 1979 !!!
@jakkin3338 жыл бұрын
The feedback from pioneer Plx turntable is just unreal. Terrible that pioneer would release it. Yet again flooding the market with sub standard over price junk. £1000+ for a pair. I'll never get rid of my technics 1210.
@lebis948 жыл бұрын
+jakkin333 You cant really get a pair technics 1210 cheaper than 1000. (if can then without cartridges)
@majorswitch81176 жыл бұрын
TECHNICS TILL I DIE LOL
@Hebbs6 жыл бұрын
The difference, if not in the performance, is that many technics have been battered at raves for the last 30 years and still work. Until pioneer can prove the same durability, the clear choice if you want a long lasting deck is the Technics. You'd have to have some seriously impressive new features to persuade most technics owners to switch.
@ashwinchiba28569 жыл бұрын
TRUE WHAT HE SAYS WHY WOULD YOU GET RID OF YOUR TECHNICS AND GET THESE PIONEERS BUT IF YOU NEVER HAD TURNTABLES AND CANT GET A PAIR OF TECHNICS AND ARE LOOKING TO GET INTO TURNTABLES THEN THESE WILL BE THE WAY TO GO.
@kevinreeks72678 жыл бұрын
Hi ya.......do not understand why you could not read the remainder of my comments........will try again, I cannot understand why the new Technics turntable has been placed at such a very high price point. Its not built to anywhere near the standard of a Professional Broadcast Turntable......but the price is very close to that. Technics need to be realistic with their price...how many Club DJ's will be able to afford it? Also, it ain't a product of Audiophile quality ( especially the Pickup Arm ) , so it is no good aiming it at this market........because there a better machines around.
@essex1ned8 жыл бұрын
ya can't beat technics sl 1200's - 1210's
@god63848 жыл бұрын
why not?
@essex1ned8 жыл бұрын
GOD everyone uses them in clubs etc... iv'e had my 1200's since 1987 and they are still going strong to this day..and i have never had any problems with them. plus they are still in immaculate condition, i would never ever sell them.
@god63848 жыл бұрын
yeah but the reason "everyone uses them" is not a solid reason why its better then the others. I think a lot of the others will go as long "strong" as the 1200s do. I want to hear a real reason? Like what features does it have better etc...
@essex1ned8 жыл бұрын
GOD i have owned a pair of numark TTX1 turntables just to see what they was like compared to the technics, they only lasted me less than 2 years as the pitch control gave up.. good decks for scratching but crap for mixing, i still think that nothing out there can beat technics for reliabillaty and strength, they use them in dmc mixing competitions so that tells you that they are awesome decks...
@DeepDoseMusic5 жыл бұрын
+GOD because they are the most reliable solid state design ever produced for a turntable. They were also designed in a time that was less about pinching pennies so they are overbuilt. the plater is heavily dampened, the body is heavy dense rubber, the top is heavy metal, the bearings are high quality. These pioneers are not built to the same standard, despite blatantly ripping off the overall appearance. They have a digital pitchfader which behaves (more like misbehaves) nothing like the analog technics fader. Its not just elitism and brand loyalty, technics are tried tested and true. They have earned their reputation, whether you like it or not.
@Atariatari-ky9te4 жыл бұрын
The best DJ Tables in my opinion are the Technics SL 1200 MK2 & Gemini PT 2410 They both have low Wow and Flutter 0.01. They both have good Torque Techs 1.5 and the Gemini PT 2.2. The are both very quiet Turntables at a Rumble of -75 db. The thing I dont like about the Stantons and the Pioneer is that 4.5 Torque in my opinion that is too much Torque and in my opinion they are not as smooth for mixing like the Technics SL 1200' series and the Gemini PT 2100 to 2410 series. I also will say that the Gemini PT 2410 is the best looking Turntable in my opinion as well. Many have not tried the Gemini PT 2410 but if they did they would know it actually is the best DJ Turntable. Slightly edging the Technics SL 1200 by looks but both perform with 5 stars. But hey any very good DJ can rock a party with any Turntable that is Direct Drive and has a good pitch control. I just feel 4.5 Torque is too much.
@cooltigermusic9 жыл бұрын
So it's more an ad video than a review video
@tecnine19845 жыл бұрын
These turntables suck to everybody, but dj grandmaster flash and jazzy jeff take these same turntables on tour.
@GTRMO348 жыл бұрын
Technics is KING..I've had my 1200mk2 for 15 years brand spanking new! Would love to buy the Technics GAE but $4k???? Pfff shit marketing.
@djhaloeight4 жыл бұрын
GTRMO34 ditto. got both my 1200MK2s brand new in ‘05 and i’m never getting rid of them. they’re still like brand new!
@6Rhyme Жыл бұрын
Just Buy the pioneer Plx1000
@toneyisaiah4086 жыл бұрын
Cut out the nonsense! I want good turntable to play my records. Toney T. Isaiah.
@koneksk83 жыл бұрын
ID? somebody???????
@stephendare9424 жыл бұрын
Someone should tell him that there is a nasty thump thump sound coming from somewhere.
@kevinreeks72678 жыл бұрын
I must say, having used The Stanton, The Audio Technica, The Pioneer and The old Technics......I actually prefer the build and performance of The Reloop RP7000 and RP8000 machines. In my opinion, the best value for money of the lot. As for The brand new Technics......have not actually used it. But the price is a joke. If it was built like a professional broadcast turntable....fair enough.....but it ain't, so in my opinion, its going to be way overpriced.
@god63848 жыл бұрын
If it was built like a .... ?? cant read the rest of your sentence
@gilboogie4 жыл бұрын
Chris WHO?? Who is this guy? and where the hell is Mojaxx. LOL
@lockyp2049 жыл бұрын
No usb connection- shame
@majorswitch81176 жыл бұрын
oh you have lol
@TD402dd8 жыл бұрын
I really dislike haters! They bring nothing to the discussion except their warped ideas of facts (or lack of them). Marantz, Denon, Pioneer, Onkyo, Monitor Audio, Paradigm, etc. etc. etc. Have plants in China because they can hire a workforce that has a technical background. The Pioneer has really found a home with Audiophiles for being able to whip VPI and some others for a third of the price. Some prat buys a cheap turntable made in China and makes a giant leap that all turntables made there are bad. Wake up fool, the Chinese are moving past some of the so called technically advanced nations. I don't bash the Technics, and I hope every street urchin will buy their new three pound anniversary model. I made a cock up buying a Rega RP1, and I'm waiting for replacement tonearm wires to do it properly. Yeah those Chinese really make bad stuff, yeah really!!
@jeffkreimes52798 жыл бұрын
+D. Paul Riderman Most companies primary reason to manufacture in China is a workforce at a significantly reduced cost.
@TD402dd8 жыл бұрын
So that's the point? Why did we have things made in Japan 1960's - Because the labor was cheap, or the work ethic of the people. Anyone who doubts the power of the Chinese will be awakened to a new world. Yes the labor is less now, but the education of the people is very high, just like in Japan.