How to Replace the Passenger Side Axle on a 2007-2014 Nissan Altima | Fix It Friday
Рет қаралды 255,996
6 жыл бұрынHey, motorheads. This video shows you how to replace the passenger side axle on a Nissan Altima. This process requires many steps please watch the video closely and take your time, be safe use jack stands, and, as always, Happy Motoring!
---
If you like this content, check out more videos in our playlists below! Be sure to check out our other playlists as well, including Ford F-Series repair videos and Fix It Friday!
Tool Review: • Tool Tuesdays
Ford F-Series: • Tool Tuesdays
Autel Scan Tools: • Autel Scan Tools
Small Business Spotlight: • Small Business Spotlight
(Dodge) Ram Service Series: • Ram Service Series
---
#RevitAuto
---
If you're in the Greater Washington D.C. Metropolitan area and in need of car repair services, be sure to visit revitauto.com to schedule your service today!
RevitAuto Contact Info
(202) 827-5955
info@revitauto.com
@Revitauto Жыл бұрын
😬THANKS FOR WATCHING! We have more Nissan Altima videos you might be interested in. 2007-2014 Nissan Altima Driver Side Axle kzfaq.info/get/bejne/rLSWlbaLxpbbn2Q.html How to change the oil in a 2020 Nissan Altima kzfaq.info/get/bejne/jdiknMt9rtTFnH0.html How to replace wiper blades on a 2020 Nissan Altima kzfaq.info/get/bejne/pKqJqsqHxtCXpIE.html
@ChknFry 2 жыл бұрын
Using the chrome socket on the impact and the impact socket on the breaker bar: definitely my kind of mechanic-ing.
@cloroxlavenderscent4307 Жыл бұрын
Been doing it all my life, my man did no wrong
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@charlesbrumbelow7318 5 жыл бұрын
one of the better instructional videos I've seen. Kindergarten level ..... I love it !!!! Definitely answered all my questions thank you !!
@Revitauto 3 жыл бұрын
So glad you liked this video and it helped you! Happy Motoring :D!
@owenstewart3519 2 жыл бұрын
Huge THANK YOU! I was going after the wheel bearings to solve a rolling hum, but your vid showed me it was the axle - mine looked exactly like yours, with the tear in the middle boot. I hoped it was the bearing cause I learned how to change those from another vid. I was afraid of axles. Thought they must be more complicated. But holy cow! Literally just two 13 mm nuts and plug and play. Like changing a really heavy, greasy light bulb.
@lucasparsons284 5 жыл бұрын
Just replaced both sides due to this video! I didn't have to remove that entire piece that holds it in place toward the back-just the "washer" as I was calling it. Great tutorial and great way to spend a morning! Thanks a lot!
@Revitauto 5 жыл бұрын
Very cool, glad you were able to get it all done! Happy Motoring! -Blair
@CloseMyDoorMane 4 жыл бұрын
Hey guys definitely appreciate the video, you just helped me finish up a CVT removal today with this info today. God bless!
@Revitauto 4 жыл бұрын
Very cool! Happy Motoring! -Blair
@DeadDocStein Жыл бұрын
Love it because in the real mechanic world. Rarely does it go smooth. So you removing the whole bracket. Was Awesome for me. Knowing my luck il be doing the same.
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@charlesonyango5608 4 жыл бұрын
"Grab your nutz and put them on" sounds like a bad pair of jeans i used to own!!! Great video. Thanks for posting. This has been a big help.
@Revitauto 4 жыл бұрын
HAHAHA! Yeah that one got a few laughs while editing it as well!
@mikegsg9r 2 жыл бұрын
Definitely going to have to remove that bracket. Might be a full day Jon for me...summer day ha. Thanks for this!
@Revitauto 10 ай бұрын
How did it go?
@mattdonovan6707 5 жыл бұрын
Great video showed exactly what needs to happen and was clear on the explanation.... AWESOME job....
@Revitauto 4 жыл бұрын
Thanks partner! Glad this video helped you! Happy Motoring!-Blair
@michellekong566 Жыл бұрын
This guy is awesome! Right to the point and very detailed with knowledge needed and necessary for the project you're about to take on. Thank you!!! Finally someone who gets to the point without some long story I'm not interested in😊
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@jonathanrobertson9142 4 жыл бұрын
This is one of the best automotive how to videos I have seen on KZfaq. Thanks!
@Revitauto 4 жыл бұрын
You are making us blush. Stop it stop it.... Wait dont stop its ok we like it! Happy Motoring- Blair
@robertrotolo2144 6 жыл бұрын
Thanks for the video, showed me perfectly how to change my cv axle on my 08 Nissan Altima with no surprises
@dissensionrammbock6331 6 жыл бұрын
Robert Rotolo I got a surprise after I removed my old Cv Axle and compared it to my new one that I got from Auto Zone totally different!,but the same part I don't know why they made it like that with no pin hole at the end .
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@bennyng765 Жыл бұрын
Good video, remove the bracket is the best suggestion. If I am not doing that, it will take forever to take out the axle
@jorgemontiel5262 4 жыл бұрын
Great video saved me a good amount of money keep the videos comeing thanks
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@pubstyle1291 3 жыл бұрын
Thank you so much!!! I had the same problem as you had to take the entire carrier out but I could not figure that when I watched your video thank you so much! it was one of those things where the answer was right in front of my face but I was frustrated with it and I just stopped before I broke something
@Revitauto 3 жыл бұрын
Glad I could help! Man that sounds like a pain! Glad you got it sorted!
@oscarwilliams5986 2 жыл бұрын
That’s how you do a instructional video great job 👏 👌✌️
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@nickstuart5657 5 жыл бұрын
I love this video because it shows you that things dont always go as plan and shows you want to do in that situation
@RhondaRodriguez-rg4my Жыл бұрын
I had trouble getting the axle out just like he did and had to remove the bracket. I thought I did something wrong at first until I watched this video. I freaking love these wonderful people who take the time to post videos. Thank you!
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@rick4x4 5 жыл бұрын
Thanks for the video, wasn’t able to take it out without removing the bearing hanger...
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@santiais2008 6 жыл бұрын
Helpful video, thank you!
@Revitauto 6 жыл бұрын
Glad this video helped! Keep us posted on how it goes for you!
@davidmercer1613 3 жыл бұрын
Clear views and description. Thank you.
@Revitauto 3 жыл бұрын
I am really glad this video helped! Happy Motoring- Blair
@AssadNiang 3 жыл бұрын
This looks like a fun job! Well done!
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@hectormondiaz1738 4 жыл бұрын
Very helpful, Thank You.
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@steveo782812 4 жыл бұрын
Love at 1:29 the impact socket is on the breaker bar and the chrome socket is on impact gun. 🤣 just kidding. These are great videos.
@Revitauto 4 жыл бұрын
Lifetime warranty baby!!!!!!!!!
@bobert557 2 жыл бұрын
@@Revitauto yeah but impact have more weight to them. Which is necessary sometimes. More rotating mass will have more force to loosen nuts. I mean it still works. But when you can't loosen a nut with a chrome socket and the thing shatters after a minute. You'll learn
@ahmedsaidu-kamara6760 2 жыл бұрын
Great video. You explained all the detailed in plain understandable English. I'm currently on the same project on my 2010 Nissan Maxima. My front passenger side CV axle separated. I've already removed the piece that goes to the front wheel. I'm having trouble removing the final piece that goes to the transmission. I've tried hitting it from the back to the direction of the front passenger wheel without any luck. I only see one bolt to remove. Have you worked on any 2009 to 2014 Nissan Maxima on a similar project? Do you have any advice for me to complete this? I've changed the two front lower control arms and two fronts struts to name a couple of things that I've already done in this car.
@blacklt104 4 жыл бұрын
Thank you, this helped
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@darrellstratton5515 2 жыл бұрын
Excellent video! I have a 2016 Altima... has much changed between my year and the years listed in the video title? Thanks much.
@jeffhileman944 2 жыл бұрын
real helpful. nice work
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@luismenchautegui5793 Жыл бұрын
Great video, i ran the same problem removing the CV. I follow your recommendation i finally made it. Also i ran into in wear noise after tie nuts, no leak transmission seal ok, with the car lifted. I still searching..
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@CarlosMartinez-qu1bp 5 жыл бұрын
Tanks my friend it what my car needs replaced .grasias amigo este vídeo me ayudará para cambiar la flecha de mi caro
@Revitauto 5 жыл бұрын
De Nada Carlos! Thanks for watching Happy Motoring- Blair
@808heart-3 6 жыл бұрын
great video. thank you
@Revitauto 6 жыл бұрын
Youre Welcome! I hope this video helps you!
@rex366 6 жыл бұрын
thanks for the vid great help
@Revitauto 6 жыл бұрын
rex366 really glad this video helped you! Happy Motoring!
@jeeptk 2 жыл бұрын
I did a left side inner boot this past weekend by re moving the axel from the hub, cutting the inner boot off removing the retaking clip in side the housing cleaning , repacking and reverse assembly. $26 and 1.5 hours time.
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@Ha0101 2 жыл бұрын
Thanks for the video helped me a lot, I had the same problem that you had, thank you for this video it helped me solve the problem, Thanks
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@technicaltrucking8704 Жыл бұрын
Lol, it will succumb to your force. Thanks for the help
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@larrypitts4879 2 жыл бұрын
Great video same problems replacing it here I think the aluminum vs steal design is what causes the problems!
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@ahmedsaidu-kamara6760 2 жыл бұрын
Great tutorial video. I have a 2010 Nissan Maxima. I need to also remove the bracket that the passenger side CV axle rests on. I've removed 2 bolts from the right side but it still won't burge. Can someone please tell me where I can find the additional bolts to remove and if you have any pics or videos that shows this, even better. Thanks in advance.
@quinnrose7315 4 жыл бұрын
Great video Thank you
@Revitauto 4 жыл бұрын
Glad this video helped! Happy Motoring!
@PssPanda Жыл бұрын
Dude. Thank you.
@Revitauto Жыл бұрын
Glad to help
@eduardoguerrero7969 Жыл бұрын
Thank you so much for the video 👍
@Revitauto Жыл бұрын
You got it!! Make it a great day!
@elushusprophet6446 3 жыл бұрын
You should be a teacher bro, great video
@Revitauto 3 жыл бұрын
I appreciate that! I went to college to be an athletic director/coach at a highschool. But I dont like alot of our school systems so now I educate via youtube and our blog :D!
@regiegija 5 жыл бұрын
Very good video.
@Revitauto 5 жыл бұрын
Thanks! I appreciate it! Good luck with doing this job! I saw your comment on our other video!
@lydellbell4638 3 жыл бұрын
Thank you for sharing 👏👏
@Revitauto 3 жыл бұрын
Thank you for watching!
@darrylredding8146 3 жыл бұрын
Very helpful...👍
@Revitauto 3 жыл бұрын
Glad this video helped! Happy Motoring-Blair
@titogarcia3822 4 жыл бұрын
perfect video!!!!!
@Revitauto 4 жыл бұрын
Thanks!! Happy Motoring!
@AlphaBobFloridaOverlord Ай бұрын
9:14 “It’s difficult to mess this up.” Challenge accepted! 😁
@espyreyes01 3 жыл бұрын
What kind of oil we need to put one finish for Nissan Altima 2011 2.5 and were
@nellybones7 3 жыл бұрын
Dude!!!! Thanks for the video thanks for all the info on every step of the process 🙌🏾 would this work on a 2010 Nissan Maxima??
@Revitauto 3 жыл бұрын
Hey! I am not sure if it is the exact same but I believe it will be super similiar! Let us know how it works for you and report back! Thanks and Happy Motoring- Blair
@LeoMartinez-fe6jz 4 жыл бұрын
Gracias por su video amigo
@Revitauto 4 жыл бұрын
De nada amigo!!!!
@jorgemontiel5262 4 жыл бұрын
Will this be the same for a 2001 nissan altima
@waltdiesel 5 жыл бұрын
Great video
@Revitauto 5 жыл бұрын
Thanks Walter! Happy Motoring!
@waltdiesel 5 жыл бұрын
@@Revitauto hey, changed out to part in a matter on minutes...how do u replace the tranny fluid
@blahdc 3 жыл бұрын
Any tips on getting a stubborn axle out of the transmission? I removed the carrier bracket and using a 5lb slide hammer and I still cant get it to go. I am able to move it about 1/4" and there is a little bit of trans fluid leaking out but that is it. I have tried rotating the tire as well.
@Revitauto 3 жыл бұрын
YEAH! I got an idea, so if you take a measurement on the axle where it goes into the differential. You can go and get an exhaust clamp and then clamp that onto the axle then use a long pry bar and a hammer and that will get it to pop out. Also helps if someone is holding the axle really straight.
@crg7490 5 жыл бұрын
When the axle seal leaks does it smokes?
@michaelburke6331 4 жыл бұрын
Anyone have a video changing the right side engine mount for 2008 Nissan Altima 3.5 L
@flyinlo1474 5 жыл бұрын
EXCELLENT done video! I have to replace both hubs and both axles on my 09 Altima (parts on order). Question, I take it that you can not over tighten the hub/bearings like you would on a trailer or other vehicles?? I am guessing that since the hub is a complete part, you just crank down the axle nut nice and tight like you did in the video. Thanks again fora great video. Now I just need to find one for replacing the hubs and I will be set for my weekend project :)
@Revitauto 10 ай бұрын
How did it go?
@flyinlo1474 10 ай бұрын
@@Revitauto it went very smooth! Thank you!! The Altima is driving like a champ. There has been alot of stuff replaced. It was a free car (from my brother). Just glad it was not a car I purchased due to the amount of work it needed. But now it should be good for another 100k miles :)
@Revitauto 10 ай бұрын
@@flyinlo1474 Anything that's free works 😀. Glad it worked out. It would help us out if you subscribed so we can upload more repair videos.
@marcomartinez4514 4 ай бұрын
My cv axle came apart when removing. Loosened the bracket as you did and it doesnt have enough room to move out. Having a hard time taking the other part of the cv Axle out. Any suggestions?
@BrandonMartinez-gj5dq 5 жыл бұрын
So the bottom ball joint aluminum bracket is holding the brake assembly. Is that it or did you take off the other little ball joint where you align the car?
@Revitauto 5 жыл бұрын
Hey Brandon at what point in this video are you referring to? We did not remove any ball joints in this video.
@justingallegos9785 6 жыл бұрын
Hey buddy, thanks for the video! Just installed mine and everything feeling SMOOTH!! Only 1 issue I’m having... when I put car in reverse while stopped I’m getting a grinding/continuous clanking sound. Topped off trans fluid, and aside from that issue car driving like a dream. Any ideas on cause or a fix?
@Revitauto 6 жыл бұрын
Hey Justin! Glad this video helped! It is really hard to diagnose sounds over text. Can you tell if the noise is coming from the front or the rear? While rolling in reverse does it make that sound or just while at idle. Did it do this before you did the axle swap? IF it is a new noise don't drive it! If it is not a new noise, can you take a video and try to replicate it?
@Revitauto 6 жыл бұрын
Also are you located near the D.C. Area?
@scottmcgregor4862 4 жыл бұрын
Great video. Can you tell me if this is the same procedure for a 3.5 with a manual transmission?
@stevewaclo167 4 жыл бұрын
I’m waiting for the same answer. BTW, just had the clutch throw-out hydraulics fail. All new clutch bits...$2300. 😱
@dwhit7451 Жыл бұрын
Mine seem to be different. There’s no retaining bracket
@ataylor7682 4 жыл бұрын
Is this the same for the 2016 altima
@elleonverduzco7653 9 ай бұрын
What are the force torque values for the nuts? I heard it's important to tighten them to the right numbers
@karlosmccluster7654 3 жыл бұрын
Good job, only bad part is......No torque wrench! I hate it for the hub bearing!🤷If you don't torque any thing else, at least torque the axle nut to specification. Just saying. Axle nut torque is very important!!!!
@nativeflight7079 3 жыл бұрын
I have this really bad hum coming from what I thought was the front passenger side. I’ve had some experiences with wheel bearing being bad and making the same sound. Changed the wheel hub and the humm is even louder. Tires seem to be balanced and the wear normal. Now the sound sounds like it’s coming from the middle of the car. Could a bad the axel make that humming sound that sounds like a bearing?
@Revitauto 3 жыл бұрын
It is so challenging to find noises. And I would really have to listen to it in person to tell you. But I can say if you are suspecting it is a tire. You can drive the car and then rotate the tires and see if the noise changes locations! I hope this helps!
@ethanmiller7224 3 жыл бұрын
Does this one have ABS or no ABS? The reason I’m asking is because I am wondering if I need one with the tone ring or not. Mine has ABS
@michaelstoker2527 4 жыл бұрын
Thankyou. What is the torque specs for that bolt you checked with a torque wrench?
@Revitauto 4 жыл бұрын
Hey! Can you tell me at what second you are looking at! I will verify that all the torque specs are in the video description
@HypocriticYT 2 жыл бұрын
Inner cv joint fell apart when trying to pull the axle out. Now have three of the four bolts out of the bracket. Last bolt on the bottom most difficult to remove. You edited removing and installing that bracket, maybe swearing was involved?
@mikesen2320 2 жыл бұрын
And when I say vibrate, I can feel it in the steering wheel. It seems to vibrate at a left to right fashion. I hsve a 2012 altima just like the one you did. I can't see how changing the passenger drive shaft would suddenly cause this issue to occur. Perhaps other front steering components need to be replaced. However, this problem only surfaced after the new install. Suggestions would be appreciated.
@jonathanm505 5 жыл бұрын
"Grab ur Nutz" lol Edit: 12:00
@stevealex2098 5 жыл бұрын
you sound like the guy that goes to the dealership
@jorgemontiel5262 4 жыл бұрын
Yea heard that too
@EB-ts7bx 4 жыл бұрын
@@jorgemontiel5262 ..,,m n. o
@adolforamirez2329 4 жыл бұрын
Hi big man.and what about the oil that is pouring you need to refill it? Great video ligth up my day men
@Revitauto 4 жыл бұрын
You will need to check the fluid and top it off if it is not at the correct level. Happy Motoring- Blair
@roJTV2 Жыл бұрын
Thank you
@Revitauto Жыл бұрын
You are very welcome
@jesseberry5500 Жыл бұрын
Thanks a bunch very informative im guessing a 31 mm socket is what I’m lacking.
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@alocamaro 4 жыл бұрын
Thank you for the video. How and how much transmission fluid do i put in it
@Revitauto 4 жыл бұрын
I checked the fluid after doing this service and only added 1/8 of a quart of transmission fluid
@alocamaro 4 жыл бұрын
@@Revitauto thank you You saved me a lot of work. Great video.
@stevewaclo167 4 жыл бұрын
I have an ‘08 Coupe with 3.5 engine and 6sp MT. Is the process the same? Torque spec on 21mm?
@Revitauto 3 жыл бұрын
It will be similar, however adding gear oil to the transmission will be different! Happy Motoring-Blair
@Duwhop31 3 жыл бұрын
Hey man i am taking out My passenger side Axel on my 2007 nissan altima 2.5l. I have the Carrier Keeper out & i removed 3 of the 4 16mm bracket bolts, but i cant get to the bottom backside 1 w/ my 1/2 dr 24in breaker bar no matter if i use an extender or 16mm regular socket or 16mm deep socket. How can i get it out without removing th3 bracket? Or how did u remove the back bottom 16mm bolt?
@Revitauto 3 жыл бұрын
Hey buddy, did you get it sorted yet? When I am trying to break a bolt or nut lose I make sure that I have the shortest amount of distance from the head of the ratchet to the bolt or nut. This multiplies my torque capabilities. I will use penetrating oil and or heat applied the the metal area to help as well. Keep us posted! Happy Motoring-Blair
@Duwhop31 3 жыл бұрын
@@Revitauto i have a 1/2 drive 24in breaker bar & a deep 16mm socket & a regular but i cant reach that last bolt... i have half of the axel off but i dnt kno how to get the rest out
@donnyarcane 5 жыл бұрын
Hey man, I really appreciate the video. Could you let me know where to find the torque values for those nuts you double checked? I'm not sure how many inch lbs are required. Thanks man!
@gman3109 5 жыл бұрын
Will I need to check the alignment after?
@Revitauto 5 жыл бұрын
I always suggest getting your alignment checked after completing any serious suspension work, with this set up you won't need it if all you are doing is unbolting the upper ball joint. That said, you can got to a Merchants tire or NTB and ask them for a free alignment check, then you can ask for a printout to decide if you need an alignment. I hope this helps Happy Motoring!
@ivosoto166 4 жыл бұрын
hello! Need your help to identify if it is a change of side axle or transmission, I have a Nissan altima 2009 4 cyl., and the problem that presents is of excessive vibration when moving forward after passing the first gear returns to normal gear change, this happens only at the beginning. please help with your comments!
@Revitauto 4 жыл бұрын
I would look up reviews for a great repair facility that will ride in the car with you to help determine the issue. Without being in the car to help and just making a guess as to what you could have an issue with. I would say to check the inner axle joint boots. When they break they cause excessive joint wear and that can cause a vibration while accelerating.
@evanderdavao 5 ай бұрын
Where do you buy your cv axle
@mikesen2320 2 жыл бұрын
I did everything just like you and the same way any mechanic would. Drive shaft works fine. HOWEVER, AT ABOUT 40MPH THE CAR VIBRATES AND ONCE PAST 50, IT DOES FINE. I HAVE NO CLUE WHAT THIS SUDDEN AFTER I CHANGED THE AXLE PROVLEM COULD BE. ANY SUGGESTIONS WOULD BE APPRECIATED.!
@BillSW 2 жыл бұрын
did it need front end balance after ?
@JuanGarcia-lf8zd 5 жыл бұрын
Would it make a clacking sound if it’s the drive shaft?
@Revitauto 5 жыл бұрын
Diagnosing over the internet is pretty tough, give as much detail as possible. When exactly do you hear a clicking? Are you on the gas or off the gas, on the brakes or off the brakes? Only while making tight turns? Does the noise get faster with speed? All of those details will help me steer you in the right direction. Happy Motoring- Blair
@bobthebuilder9416 2 ай бұрын
12:30 do you torque to specific specs? Thanks
@xxmobstrxx8535 3 жыл бұрын
Did you refill the transmission?
@Duwhop31 3 жыл бұрын
What is the torque specifications for the axel nut, spindle knuckles bolts, & the bracket bolts
@espyreyes01 3 жыл бұрын
What kind of oil we have to put after changing the axel for Nissan Altima 2011 2.5 and were
@josetrevino2422 2 жыл бұрын
do you pull it out or it off it self?
@beansandwiched 3 жыл бұрын
I was told that my differential was bad. How do you know if its the axle or differential? We're experiencing a slip then it catches over and over. Sort of like when you strip a bolt with allen wrench.
@Revitauto 3 жыл бұрын
Hey Victor, I would make sure to have your issue diagnosed by a profressional shop that shows you their diagnostic sheet and procedures. Without seeing the car or test driving it myself I really dont have enough information to be able to advise you. Happy Motoring- Blair
@larrymack2659 3 жыл бұрын
Is it the same for the rear???
@HypocriticYT 2 жыл бұрын
My axle looks identical with the ripped boot. The lower control arms on both sides the larger rubber bushing failed and was ripped. At about 200,000 everything in the front end needs replacement. Oil pan almost rusted through, a small flat tip screwdriver easily punctured it with just hand pressure. It was running badly once hot and needed to be turned off for half an hour. Local tranny shop said it was done. I googled it and replaced the rotation sensor on the tranny and it ran like new with the new $40 sensor. Rear lower shock mounting bolts can be seized in the rubber bushing. Bolt rusts tight in the steel tube that the bushing surrounds.
@mrerok 3 жыл бұрын
Is there anyway to put axel back in the trans wrong or it only fits back in like into a grove. And how much trans fluid did you put back in ?
@Revitauto 3 жыл бұрын
If it is sunk all the way in. Then it is in! The splines of the axle line up with that into the diff/transaxle. If it is in far enough it is in!
@mrerok 3 жыл бұрын
@@Revitauto thank you
@jodeice24 4 жыл бұрын
if u don’t measure how much fluid u loose but it’s still seems full on the dip stick wat do u recommend
@Revitauto 4 жыл бұрын
Jodeice Witherspoon the dipstick does not lie! If you lost a little fluid and you check the fluid on a level surface with the vehicle running and in park and it all looks good. Then you are good. How did you check the fluid? Was the engine running?
@earlathill3944 3 жыл бұрын
What happened to properly torquing down the axle nut? I did a job like this on my wife’s Altima, and I over torqued it with my gun... bearings went bad in no time... axle nut needs 129ft/lb for proper installation and to prevent over tightening and bearing (hub) failure.
@Revitauto 3 жыл бұрын
Thanks for posting! How many miles were on your wifes car? Yes over turning will cause bearing failure prematurely. I for some reason can not find that torque spec in my data base.
@gregsmith332 6 ай бұрын
@@Revitauto No. It's because you're lazy.
@Revitauto 6 ай бұрын
Thanks, happy new years@@gregsmith332
@RhondaRodriguez-rg4my Жыл бұрын
I've never changed an axle before but thanks to your video I did it! I saved my brother money. I love being a female and not having to depend on anyone else or pay a mechanic to do something I can do myself. I conquered it thanks to your video!
@Revitauto 10 ай бұрын
Glad it was helpful. We would appreciate it if you subscribed to help us grow and continue creating repair videos to help everyone. Happy motoring!
@navehere 4 жыл бұрын
Wher can I buy axle for 2007 Nissan Altima 2.5S right front wheel cv axle? How much does it cost
@broski7106 2 жыл бұрын
Mines was a 100$ @ auto zone
@ColinQuinnuniverse 6 жыл бұрын
what was the product mention at the end?
@StickerVR 5 жыл бұрын
Skinny salami LMAO
@briansharp1610 4 жыл бұрын
Would this be the same process on a 2010 maxima?
@Revitauto 4 жыл бұрын
It is a similar process but I do not think identical! When you get it sorted report back and let us know!
@tylerdirden3416 5 жыл бұрын
Good video man, thx!
@Revitauto 5 жыл бұрын
Thanks ! Happy Motoring!
@joelpele100 5 жыл бұрын
How much for this work?
@IsaidIt747 3 жыл бұрын
What’s the panel number at @5:30?
@crislaguna2013 4 жыл бұрын
Lmfao i died when he said grab your nuts🤣🤣💀💀💀 but good video .
@mimumimimimimimimimimmim 4 жыл бұрын
hey.. how much cvt fluid was lost when it was pulled? TY
@Revitauto 4 жыл бұрын
We barely lost anything at all! But we had a hill in our favor. Grab a 2 quarts just incase you arent so lucky. I would be surprised if you lost more than .5 quarts
@hondaguy425able 3 жыл бұрын
I think you mean transmission fluid there is no such thing as cvt fluid?
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 168 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 212 М.
Alex, The Car Doctor
Рет қаралды 84 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 507 М.