Ricoma MT-1501 Review: A Real Owner Embroidery Machine Review

Рет қаралды 15,208

3 жыл бұрын

In todays video I am reviewing the Ricoma MT 1501. I've owned my machine for almost 2 years so you are getting a real life review, with real world results. Leave your questions and comments down below because there will be a part 2 based on questions and feedback. Thank you for supporting the channel, make sure to subscribe.
Mighty Hoops Free Shipping
Promo Code: Romero
hoopmaster2.wpengine.com/ref/...
(within the contiguous US)
Or Place orders via telephone and mention “Romero Threads”
Call Hoopmasters at: 262-257-0930.
Items used in this video:
Towa Sewing L-Style Thread Bobbin Case Tension Gauge TM-1
amzn.to/3xxjPmr
Mini screw driver case:
amzn.to/3q8gI1K
Dritz 710 Mark-B-Gone Marking Pen Combo Pack, Blue & White
amzn.to/3oKJnYF
Must have embroidery items we use everyday.
---------------------------------
Embroidery Sharp Needle: amzn.to/3ldQnku
Ball Point Needles: amzn.to/3Yg3y3h
Graphic Alignment Ruler: amzn.to/3JUQ60f
Embroiderer's Helper Placement Tool: amzn.to/3YEIRgS
Fiskars Rotary Cutter, Titanium: amzn.to/3I8aFFd
Tide Pen: amzn.to/3Ialpmj
FlexFit Hat: amzn.to/3YDkqk5
Puffy Foam 3mm: amzn.to/3RNzd9u
L-Style Towa Bobbin Tension Gauge: amzn.to/3YjUDO5
Amazon Essentials: Items we use everyday
Must have embroidery items: amzn.to/3DStHwK
Books I read: amzn.to/3YFpsN7
Photography & KZfaq Equipment: amzn.to/40KI5AT
Shipping supplies: amzn.to/3RLwtJN
Yupoong 1501 Heavy Weight Cuffed Knit Cap
amzn.to/3e5ssNt
Heat Press:
HPN Signature Series 15" x 15" Slide Out Drawer
shrsl.com/3bosk
AllStitch (everything you need for embroidery)
allstitch.com/?ref=RomeroThreads
Visit our Embroidery Amazon Page to view what products we use for everyday use:
www.amazon.com/shop/romerothr...
Embroidery Machine: Ricoma MT-1501
My Amazon Embroidery Products:
www.amazon.com/shop/romerothr...
Groz Beckert Titanium Coated Embroidery Machine Needles (size 80 / 12)
amzn.to/3aGyaCD
Sulky Of America 12 Color 3mm Puffy Foam Assortment, 6" by 9"
amzn.to/3m1tq1s
Gingher 4'' Curved Embroidery Scissors (best of the best)
amzn.to/3ekzOO7
Fiskars Curved Craft Scissors, 4 Inch
amzn.to/3p5Dbue
Embroiderer's Helper - Template Aid - Placement Tool
amzn.to/36FJ2jO
Towa Sewing L-Style Thread Bobbin Case Tension Gauge TM-1
amzn.to/3xxjPmr
Mini screw driver case:
amzn.to/3q8gI1K
Dritz 710 Mark-B-Gone Marking Pen Combo Pack, Blue & White
amzn.to/3oKJnYF
Duckbill Scissor
amzn.to/3qSKwP2
Odif USA 505 Spray and Fix Temporary Fabric Adhesive 12.4oz
amzn.to/3q2XZDT
My Computers and Electronics:
Apple MacBook Pro
amzn.to/3bMCJ0s
MSI GF75 Thin 10UEK-029 17.3" 144Hz 3ms FHD Gaming Laptop Intel Core i7-10750H RTX3060 16GB 512GB NVMe SSD Win10
amzn.to/38E1KsP
GoPro HERO8 Black - 4K Ultra HD
amzn.to/3q4DmY2
Sony RX100 VA 20.1 MP Cyber-Shot Digital Camera
amzn.to/3p33P7c
Brother SDX125E Electronic Cutting Machine, Scanner, Grey and Blue
amzn.to/3ruKld2
Shipping Department:
Amazon Boxes: Aviditi 886 Corrugated Box, 8" Length x 8" Width x 6" Height, Kraft (Bundle of 25)
amzn.to/2Lqbvmg
ULINE 25 Clear 18 x 24 Poly Bags Plastic
amzn.to/3pU6Sje
Avery Shipping Address Labels, Inkjet Printers, 50 Labels, Half Sheet Labels, Permanent Adhesive, TrueBlock (8126)
amzn.to/2P4FAGj
DYMO Digital Postal Scale/Shipping Scale, 10-Pound
amzn.to/3pPaT8D
Photography Department:
-Product Photography Camera: Canon 5D MK III
amzn.to/3ztn27q
-Hat Holder:
amzn.to/2We67rf
-Hat Helmet:
amzn.to/3rwq3kS
-Back Drop:
amzn.to/3BOHMsy
-Reflector:
amzn.to/3kQZyoL
AllStitch (everything you need for embroidery)
allstitch.com/?ref=RomeroThreads
With Amazon affiliate links, I earn a small commission and it helps the channel. Thank you for supporting.

Пікірлер: 100

@larryeber 3 жыл бұрын

The Ricoma Embroidery machine community is lucky to have so many that are willing to help others. You are great example of our community!

@RomeroThreads 3 жыл бұрын

Thanks for the message, the more quality knowledge out in the internet world, the better.

@mariobautista1205 3 жыл бұрын

Romero this is the best video I ever com sin my first MT 1501 ricoma is 5 years old still working lick a work horse one year later I got me a 1502 1 1/2 years later I got a cht2 4 head its lick you sad study kip on learning day by day I never stop learning embroidery is not for anyone you have to heave passion theirs a lots a videos to learn embroidery legacy is one of the best digitizer you all can learn a lot from him tanks Romero you did a grate job with your video

@terrivining7019 2 жыл бұрын

Thank you for your honesty and real review. Also, for your service to our country. I've learned a lot from your videos. Again, thank you.

@cookiehead89142 3 жыл бұрын

Great video sir! My go to is you tubers that actually use the machines. I trust your review and subscribed. I first look at the negative posts on a company and Ricoma has a few negative posts against them. But your review here makes me look at Ricoma in a positive way. Customer service is a big game changer for me also. I was quoted on the TC 1501, but you made a good point on getting bigger if can. I hope all is well for you in these days we're living in. Do work. Peace

@123GO.. 3 жыл бұрын

Just purchased my 1502 today! I will be on your page religiously.

@camdawson5714 3 жыл бұрын

How is it working for you so far?

@hovigt1 3 жыл бұрын

Thank you for the video, Romero. I, know very little about the embroidery business. Just like you, I'm doing my research, to eventually buy an embroidery machine. I agree with you about buying high-end machines. Buy quality and reliable equipment otherwise, you will outgrow smaller machines fast. I'm also buying a sublimation machine in a month or two. I will start with sublimation and work my way to embroidery as I learn more about the business and the machines available. Thanks again for the informative videos

@angelaschoffstall1146 3 жыл бұрын

Thank you for this video. I am getting ready to buy this machine and this helps so much.

@RomeroThreads 3 жыл бұрын

You are welcome!

@garycrumrine9538 3 жыл бұрын

I was born in Wisconsin, but grew up in the Rockford area. So I am well familiar with the cold. Thank you for your video.

@thegirlsmom511 Жыл бұрын

Thank you so much for all of your videos!

@RomeroThreads Жыл бұрын

You are so welcome!

@rvelas09 3 жыл бұрын

Thanks for the information!

@rujastitches4653 3 жыл бұрын

I'm following you since you started your channel, your information is really valuable and has given me the confidence to proceed with MT 1502.

@RomeroThreads 3 жыл бұрын

Thanks, Im glad the videos are helping.

@CHROMEBLAZEstudio Жыл бұрын

Amazing content !!! Thank you señor Romero !

@Red.E.Hustle 3 жыл бұрын

Great video and I enjoyed the review from a long time owner

@jodyhartman2527 3 жыл бұрын

Thank you for your service! My son is in the Navy as well 🤗

@RomeroThreads 3 жыл бұрын

Hello, you must be very proud. Thanks for the comment.

@tat2chrome 3 жыл бұрын

Great information! Thanks bro!

@jackandrileysmom1118 2 жыл бұрын

So glad I saw this today... I went to Ricoma yesterday to get the 1501and now think I am getting the MT-2001. I have no background, so I am worried if I can pull it off and if I'm picking the right company.... you helped me seal the deal. Thank you

@loosethreadshermosa1583 2 жыл бұрын

You make good sense. thanks for the help.

@sunrisetacticalgear29 3 жыл бұрын

Thank you for your service, I just found your channel and am a new Subscriber. I am new to embroidery and look forward to seeing your projects. I purchased my machines to focus on hats too, I’m really interested to see your hat hoops in action. Back in the day, FC2 USS Valley Forge CG-50.

@RomeroThreads 3 жыл бұрын

Thanks, will definitely have more hat projects.

@rosalindabotellojuarez4839 3 жыл бұрын

New to your channel!!! My husband and I just started embroidery this fall and we're in the burbs of Chicago. I'm looking forward to gleaning from watching your videos.

@RomeroThreads 3 жыл бұрын

Welcome to the embroidery world!!!

@cantantegladystejada Жыл бұрын

Looks like an honest review...I am getting ready to make a purchase...my first Ricoma sucked at caps...out of frustation I threw out the cap frame and cap hoops....maybe it was bad luck but I do need to make caps...is between this Ricoma MT-1501 and a Meistergram 15-needle. So you are happy with your machine for CAPS?

@loubensoctave3986 3 жыл бұрын

I want to embroider on bags, what kind of embroidery machine I should use?

@kayskreations1241 3 жыл бұрын

I'm looking into getting my first multi needle. I keep coming back to the Ricoma

@RomeroThreads 3 жыл бұрын

My MT 1501 works like a charm. It was my 1st ever embroidery or sewing machine, started with no knowledge and easily learned by doing projects and jobs. If there's any questions you have about anything let me know.

@Renuewspa 3 жыл бұрын

Great information!

@RomeroThreads 3 жыл бұрын

Thank you!!

@terrybarnhill8451 3 жыл бұрын

Awesome ! Have two small machines. Need direction to have success.

@jimmyfavereau 2 жыл бұрын

eXcellllent vid. thanks Amigo!

@jacquelinejee5167 3 жыл бұрын

Thank you for your fabulous videos. How do you find a quality supplier of polos T-shirts hats I’m from uk Hope you have a very Happy Christmas 🎄

@RomeroThreads 3 жыл бұрын

Thank you for your message. I use the major vendors that are quick with shipping and require a resale license. Here in the states SS activewear and Sanmar are my go to supplier. Merry Christmas to you too!!

@jessiegibson9023 2 жыл бұрын

Good video thanks

@kennethhariston6947 3 жыл бұрын

great video

@RomeroThreads 3 жыл бұрын

Thanks!

@MrNenemott 3 жыл бұрын

Love your videos, very professional, just bought a ricoma 1010, went a little cheaper. Are they good for hats?

@RomeroThreads 3 жыл бұрын

Thanks!! I don't have the 1010 but Ive seen people knock out some nice hats. Congrats and good luck on your machine.

@jwalker3311 3 жыл бұрын

Hey thanks for making this video. Do you happen to have any recommendations, where to buy blank quality hats in downtown LA, Ca I appreciate it

@RomeroThreads 3 жыл бұрын

I don't. I find it better to buy online and hit the minimum purchase amount to get free shipping.

@j.champion Жыл бұрын

Thanks for the video! I have a question… How much would you say the annual power consumption on this unit is, based on your experience?

@RomeroThreads Жыл бұрын

I haven't ran the numbers on the machine by itself. We do run other equipment that pull way more power. The machine doesn't draw too much compared with other items.

@leestanley8673 11 ай бұрын

my wife and i love your videos. We purchased the mt 1501 for her and would like to know what brand of thread do you use? what speed are you able to run your machine at and still get a nice stitch and less thread and bobbin breakage? she would love to find a brand of thread that will accommodate speeds over 600 (she currently is trying out brothread but she gets constant breakage (even adjusted tension) with any speed over 600) thank you

@RomeroThreads 11 ай бұрын

Thank you for the message! I use Madeira and Candle Thread. I usually run flats at 700 and under. And go lower for hats and 3D puff. Ive haven’t used Brothread.

@50-STARS Жыл бұрын

The best video ever

@deedeepena6001 Жыл бұрын

Hello Romero Just like you I don't know any thing about embroidery. Okay what get me is how do you get width and length . Do start 1inch and convert to mm? OR do I measure it on screen with ruler? Please help out

@RomeroThreads Жыл бұрын

Yes, I first adjust the design to the correct size in inches, then I measure and digitize in mm. The software has a ruler you can measure distances.

@LucyLu70 3 жыл бұрын

Hi Romero Thank you for this video. Thank you for your services God Bless you and your family. I'm actually purchasing my MT1501 so expect a lot of questions from me. You need a email for us to send pictures of our work to get your feed back. Also Ricoma is running a great deal on their machines as we speak. It's the Black November sale. Thanks again

@RomeroThreads 3 жыл бұрын

Thank you for the kind message. Yes, I can definitely answer any questions and give you any type of feedback. My email is 4everromero@gmail.com

@patriciabellas7187 3 жыл бұрын

@@RomeroThreads hi can u give me a link to purchase this machine

@rship783 Жыл бұрын

As soon as you said “I don’t have the homie hookup”, I knew we’d be cool. 😂

@happyjapanusa5139 2 жыл бұрын

We would like to demo our Happy Japanese embroidery machines for you, in case you ever want to upgrade in the future. We love your content.

@michelleobie4674 3 жыл бұрын

Is the Ricoma better than other brands? Thank you for your channel.

@RomeroThreads 3 жыл бұрын

Ive based my business around my Ricoma machine and been able to crank out some pretty big orders for the past couple of years. Ive never used any other machine so I cant tell you if its better than the others. But if you have any questions about the Ricoma MT 1501, let me know.

@jamesc2212 3 жыл бұрын

my biggest question is why you chose the Ricomo over other options.... I do love your videos..... I also do heavy heavy research....

@RomeroThreads 3 жыл бұрын

Easy price, easy payments, good company, good support. Ive seen it do hats and that was my main thing to embroider.

@adojamilu7718 3 жыл бұрын

Some one told me that Ricoma machine doesn't stop when the Bobbin thread runs out. Is it true?

@RomeroThreads 3 жыл бұрын

Not true. I get a stop and alert when bobbin runs out.

@nicholaswilson2921 3 жыл бұрын

What is the cost of this machine?

@thepatchman Жыл бұрын

Great

@jmeredithD2 2 жыл бұрын

We ordered the MT 1501 - can it do these other items you are describing?

@RomeroThreads 2 жыл бұрын

Congrats on your new machine. Everything on my channel is done on the MT 1501. Let me know if you have a specific garment question your talking about.

@jmesheppard4383 Жыл бұрын

Whats the difference between the mt-1501 that you have to the RCM-1501TC-7S

@RomeroThreads Жыл бұрын

The clearance is smaller on the TC model. The 1501 allows for more bulky items.

@sonamwangchuk6871 3 жыл бұрын

Seen some negative videos on Ricoma on KZfaq. Whats your take on that?

@RomeroThreads 3 жыл бұрын

Thanks for the question, I can only speak on my own experience. My machine runs everyday, mostly 3d puff hats. Sometimes one negative review can outshine all the numerous positive and successful testimonials. Sometimes the negative reviews is by someone that doesn't own the machine so its hard to get a true review. But like I said, Im sharing my true experience and thats really all I can do.

@pickavana8056 11 ай бұрын

Do you have a video showing you actually using the machine and the results you achieves?

@RomeroThreads 11 ай бұрын

I have about 200 videos, what garment do you want to see get embroidered.

@barbaraedwards9200 3 жыл бұрын

Where do you buy top quality blank hats? Shirts?

@RomeroThreads 3 жыл бұрын

SS Activewear and SanMar

@barbaraedwards9200 3 жыл бұрын

@@RomeroThreads thank you !

@MRRHODES3RD Жыл бұрын

Is that background a set or is that your actual production area?

@RomeroThreads Жыл бұрын

Thats our actual production shop.

@MRRHODES3RD Жыл бұрын

@@RomeroThreads Do you find your setup; your setup the best for your workflow; what would you change if you had to; I will be receiving my 1501 in a few days and trying to get an idea of how to optimize my work flow and space.

@RomeroThreads Жыл бұрын

My #1 recommendation is to have the least amount of clutter, unnecessary equipment and junk in your area. We usually keep 2 blank tables to use as working space. That way we have space to place garments and materials per projects. We have a good amount of space so our blanks are shelved on the opposite side of our room.

@eddraromero8142 3 жыл бұрын

How long is it under warranty?

@RomeroThreads 3 жыл бұрын

Hello, according to my warranty it has a 5 year limited warranty that includes 5 year warranty on main drive components, 3 year warranty on electronics, 1 year technical labor and lifetime technical support via phone or email. You can contact them directly to get all the up to date info, they are easy to work with, thanks.

@scottreagan9573 3 жыл бұрын

How is the machine running now?

@RomeroThreads 3 жыл бұрын

My machine runs like a champ. Still good, running 3D puff everyday, at least 5 times a week.

@nompumeleloxulu5079 3 жыл бұрын

Interesting hy

@brendacole5951 3 жыл бұрын

How heavy is the machine? I would need to put it in the basement

@RomeroThreads 3 жыл бұрын

Its pretty heavy. You need 2 big guys or 3 people to carry it up or downstairs. Im not sure of the exact weight.

@brendacole5951 3 жыл бұрын

Thanks ..

@sotosbrother9389 3 жыл бұрын

You'll get your PhD in embroidery soon!!!

@RomeroThreads 3 жыл бұрын

Lol, good one. Yea, that what it feels like sometimes.

@milbrandtdesigns458 2 жыл бұрын

I gave up on the 1501 - I purchased a ZSK and man it blows the Ricoma out of the water. I can't tell you how many caps I wasted trying to get a decent sew out with the TC-1501 and it was always subpar to the point I stopped offering caps for sale. After 1 day with my ZSK i am taking orders and selling caps! Ricoma is a basically a hit or miss. (The 1501 was my second machine I had a tajima before this and I got sucked in by the Ricoma marketing, so before someone asks if I have expereince I do)

@RomeroThreads 2 жыл бұрын

Congrats on your new machine. All we do here is mostly hats, we have 2 machines that pump out work all day. Thank you for your comment and sharing your experience.

@CheersClubMusic Жыл бұрын

Is the machine good or not ???????

@RomeroThreads Жыл бұрын

My machine is great. My new review is coming soon, 3 years with my machine.

@CheersClubMusic Жыл бұрын

Just Speaking for myself , if I had this and it worked as advertised ,it would literally be like a money machine for me ..I just wanted to know if this machine is sufficient for embroidery on plush sweatsuits and denim . If it isn’t what would you recommend to accomplish that

@philgrape9449 3 жыл бұрын

where is the review of ricoma itself? here is only general speaking about anything but mt 1501.

@RomeroThreads 3 жыл бұрын

What is your question about the review. I went in pretty deep and if you want any additional information you can ask.

@chrisalexander7819 3 жыл бұрын

Deep into the abyss.

@MzzzTbaby 3 жыл бұрын

You sound like a representative of their company. Everything you said is opinion based.

@RomeroThreads 3 жыл бұрын

Is there a question in here? This is my experience with the company and I can only give my opinions . If there's anything you want to know that I missed let me know.