WATCH THIS BEFORE YOU BUY A RICOMA MT-1501

Рет қаралды 26,341

3 жыл бұрын

Watch this video before you buy a Ricoma MT-1501 Multi-needle embroidery Machine. There is a reason why the MT-1501 is so controversial. Today I'm giving you my honest truth about the MT-1501 and my opinion and what I know to be factual about everything going on behind the scenes.
Ricoma Affiliate Link
ricoma.com/US/referral/allan-...
Heat Transfer Warehouse Affiliate Link
www.heattransferwarehouse.com...
Heat Press Nation Affiliate Link
Heat Press Nation shrsl.com/2qagz
The Vinyl Stand Affiliate link
thevinylstand.com?sca_ref=374825.SQXqmSxOwT
Vexels Referral Affiliate Link www.vexels.com/?ref=allanwade
Amazon Link Affiliate Link amzn.to/32Mw5D4
Cosmos Ink Sublimation inks shrsl.com/2tnx7
Tube Buddy Affiliate link. www.tubebuddy.com/adubbproduc...
Shop A-Dubb Productions Channel Merchandise Store
❤️👉🏾allanawade.com/
For Contributions send to:
Paypal weloveuadubb@yahoo.com
Cash app $adubbproductions
Venmo @kingallanalexanderwade
For collaborations and business inquiries, please email me: adubbproductions@gmail.com
****************************************************************************************
Visit my AMAZON INFLUENCER PAGE where all the gear I talk about and use lives.
👉🏾www.amazon.com/shop/allanwade
Start investing in ACORNS today using the link below. You get $5 and I get $5 for starting to invest using my link.
www.acorns.com/invite/RB7TTW
Home Depot affiliate link 👉🏾homedepot.sjv.io/N3bXV
AMAZON LINKS
Shop on Amazon using my affiliate links Below:
Silhouette Cameo 4 plus amzn.to/32Mw5D4
Silhouette Cameo 4 amzn.to/38pwo6L
Digital Heat Press 15 x 15 amzn.to/2EqjiZK
Brother SE600 Sewing and Embroidery Machine amzn.to/2EYEya0
Brother PE800 amzn.to/2GaieKE
Spool savers amzn.to/3eO5Wrv
Embroidery scissors amzn.to/3cLqlLZ
Fray Check amzn.to/3bEh9sK
Simthread Brother 40 Color Thread amzn.to/2zuXHk0
Tear away Stabilizer 6x6 amzn.to/3eMfinE
4x4 embroidery Hoop amzn.to/2yGcRCw
PANASONIC GH5 amzn.to/2QzE8u7
Rode VideoMic Pro Plus amzn.to/2HaPsvc
Rode VideoMicro amzn.to/2SC358A
RODE VIDEO MIC PRO amzn.to/2hNMyfU
GoPro Hero 9 Black amzn.to/2ZUolNo
SONY-FDR X3000 amzn.to/2hNRZf3
JOBY GORILLA POD amzn.to/2Et83zq
FOTODIOX GREENSCREEN amzn.to/2roav7m
IKAN iLED6 amzn.to/2DiiZyp
Dji Mavic Mini amzn.to/2ttqNh8
Delkin TRIPLE Fat Gecko Three-Arm Suction Mount amzn.to/2GyKbLh
Fat Gecko Camera and Camcorder Mount amzn.to/2GANvWm
****************************************************************************************
DON'T FORGET TO SUBSCRIBE.
🔑Subscribe to my other youtube channel
Allan Wade 👉🏾 / @allanwade
🔑Like my Facebook Business page
👉🏾 pg/adubbprod...
🔑Follow me on instagram
👉🏾 / kingallanalexander
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
Also check out my business website
If you want tips and tricks and suggestions on how to make your next production better click the link below.
adubbproductions.com
#MT-1501 #embroiderymachine #RICOMA

Пікірлер: 318

@LorrieNunemaker 3 жыл бұрын

Proud user of the Em1010. I’ve had the same people in my feed. I love my Em1010 and have had no problems that weren’t user errors. Great advice and video. Keep on keeping on! 👍🏻👍🏻👍🏻

@adubbproductions 3 жыл бұрын

🙏🏾 thank you.

@vernonbice732 3 жыл бұрын

Allen, hang in there man. You are doing a great job in your videos and we appreciate your information. In the world of the internet there will always be those who post insane stuff just to be noticed. They want to stand out. They make themselves feel important by tearing down those who are successful. Ignore them. Yes, it is hard to see that stuff on your channel, but, the rest of us out here recognize it for what it is. Just people being juvenile. Keep up the good work. The rest of us are watching :)

@adubbproductions 3 жыл бұрын

🙏🏾 appreciate it. Thank you.

@bubbygong 3 жыл бұрын

I don't have one of these machines but I enjoyed watching this. I appreciate your honesty. You're a teacher and a therapist all in one! Keep up the great videos!

@justinlehman1413 3 жыл бұрын

Thanks for the great content bought my first embroidery machine because of you man still figuring it out. Thanks a lot

@adubbproductions 3 жыл бұрын

Which one do you have? What issues are you having?

@josephsterling8510 2 жыл бұрын

Listen I enjoy watching your videos. They have helped me out tremendously. Don’t let one person stop you from doing your thing. It’s helping us that don’t know how some of this stuff works. Keep doing what you do. I for one appreciate what you do. Thanks

@YMGCustomDesigns 2 жыл бұрын

You spoke so much truth!!! I get people asking me simple questions about some of my content and I’m like…. I watched hours of videos to learn this stuff and I’m telling you what I’m using and what videos to watch… and they will still ask me questions that make no sense at all. 🤦🏽‍♀️

@matbjones 3 жыл бұрын

You're doing a great job. I'm considering getting this machine because of your content. Stop wasting your energy on the naysayers. Direct your energy to creating content for those of us who actually find value in what you're delivering. For those who don't like it, they can feel free to keep scrolling to a page more suitable to their liking. Periodt.

@leslieramm4754 3 жыл бұрын

Thank you for this video. It is well deserved out here bc it is so true that people do complain about something’s when they don’t know what they are talking about.

@adubbproductions 3 жыл бұрын

🙏🏾 right.

@leviteapparel 11 ай бұрын

This is an oldie but had to watch it again Still amazing lots of gems 💎 💎 💎

@ellelatorre2893 3 жыл бұрын

I wish I could give you than one like. Your content is amazing. You show all your mistakes and how you fix them. There is no explanation on how people can be so blind. I think it is the competitors who want to keep Ricoma down, If that makes sense. Keep doing what you are doing it is needed and appreciated.

@adubbproductions 3 жыл бұрын

🙏🏾 thank you.

@Suri2122 2 жыл бұрын

Thanks for the information man appreciate it. Just ordered my machine. We will be using it at our new business inside of our local mall.

@zenoxwolf 3 жыл бұрын

Thank you Dub. You always come in Clutch ❗️🚵🏽Ⓜ️

@joycewatson9452 Жыл бұрын

Thank You Dubb Production! It’s because of you that I purchased my MT1501 Today!!! Looking forward to flourish into business this year.

@MrEclay2 Жыл бұрын

Glad I ran across your video! I’ve been wanting to get an embroidery machine and think this might be the one. Like how you explained the way to operate it also 👍🏾

@deescustomcrafteddesigns4744 Жыл бұрын

U r great, very helpful and respectful with you knowledge and awareness of the products you use. I appreciate you King. Keep it up, let’s have fun learning and crafting

@allisonwise3856 3 жыл бұрын

I have had my TC-1500 for 4 months! I love this machine! Your are soooo right........ you gotta learn how to use the machine, watch videos and experiment with different materials. My machine has made money every month that I have had it! I have no idea why people are questioning Ricoma so much........ it is a great machine!

@cristianescobedo7592 Жыл бұрын

Hey Allen I just bought my first Ricoma using your code excited for the new adventure

@domeniqiknash3193 3 жыл бұрын

Thanks A Dubb for your digitizing services we at IAm Dance center for the arts can't wait to start stitching the design on our dance apparel it was great seeing our design in the video again thank you so much

@adubbproductions 3 жыл бұрын

No problem. Thank you so much for your business. Sorry it was such a controversial video but you are going to get a lot of exposure. E-mail me if you have any issues.

@48yenda 3 жыл бұрын

Make. Sure you notify me everytime you make content I really thinking about purchasing a Ricoma but I would like to learn more I am watching all your videos on the subject thank you for all you do.

@isabellaginapozomendez3784 3 жыл бұрын

Good Content! Thanks for sharing!

@adubbproductions 3 жыл бұрын

No problem. Thanks for watching.

@lakeshiaconquest1845 3 жыл бұрын

Just bought me one.. I have been educating myself on how to use it properly. I am super excited!

@adubbproductions 3 жыл бұрын

Congratulations. You are going to love it.

@llkaygifts 3 жыл бұрын

I appreciate your honest feedback on the machine, I'm considering purchasing one with their financing to replace my 6 needle Brother PR600.

@mindsetmanagement2893 2 жыл бұрын

Thanks for the gems king. I’m in the process of getting a machine myself i also subscribed to the channel.

@MrCrash72s 8 ай бұрын

Thank You for sharing, all your experiences and knowledge you share ... it makes a difference for all of us, willing to learn.... Great Job!

@ScalpnGo Жыл бұрын

Which I had purchased the Ricoma, but the advice you give is still very much usable. Keep up the great work.

@theemclane4037 3 жыл бұрын

Always here on uploaded day !!!

@adubbproductions 3 жыл бұрын

🙏🏾. I appreciate the support. Thank you.

@btdllc 5 ай бұрын

learning now to be prepared for when ours comes

@Roy1271 3 жыл бұрын

LOL, I saw the video as well... and it was at a time that I was having thread breaks with my EM1010. His complaint was more so with the arrangements he was going to get as an affiliate. It was going to put a little pressure on how much influence he had over his followers and leveraging that influence for the cost of that MT-1501; not a cheap machine. I ended up upgrading to the MT-1501, not because the EM-1010 was a bad machine... but because I needed it to meet my needs. I took a lose on it a little, however, the Ricoma support team is what makes it worth it. They have helped me work it out.

@christoaphercampbelll6311 Жыл бұрын

Good job bro! You do good work!

@adubbproductions Жыл бұрын

Thank you

@cynthiahaugabrooks7424 3 жыл бұрын

Please keep up the great job you are doing.

@adubbproductions 3 жыл бұрын

🙏🏾 thank you.

@leviteapparel 3 жыл бұрын

keep pushing foreword bro. good contain.

@mmru4real 3 жыл бұрын

Great Video, thanks for keeping it real!

@adubbproductions 3 жыл бұрын

No problem. Thanks for watching.

@mmru4real 3 жыл бұрын

@@adubbproductions you do a quality show, and you keep it real, what more could people ask for, keep the great Vids coming.

@mercyguerrero5240 Жыл бұрын

Live your videos I don’t have a Ricoma but a soonest I can afford it I will buy one trust me. I have a Bai and the problems I have are user errors. Thanks for encouraging me. Love your channel

@adubbproductions Жыл бұрын

No problem. As long as you are in the game making money it doesn’t matter what you have. Thanks for watching.

@vreyes4er 3 жыл бұрын

I see a lot of people with these machines and they love them. People are making unboxing videos about them they are so excited to have them. I love to watch your videos I learn a lot so please keep making videos lol👍

@adubbproductions 3 жыл бұрын

Thank you. I will. Thank you so much for watching. 🙏🏾

@PS-xy2ng Жыл бұрын

Hi. I've seen you in another video. I enjoyed it so much. You were happy about sharing. It was light-hearted and funny too. This one was headache causing. I understand your frustration, but it was overkill. I caution you to not let others steal your joy.

@anthonybatch1742 Жыл бұрын

Keep on keeping on brah . I love you videos, an the quality of your work speaks for your equipment an your hard work . I live in Delaware, an it would be nice to meet up with you an tap in . I’m about to buy the 1501TC an the printer/ press.

@creativebobbo Жыл бұрын

Excellent rant! Not just embroidery but life coach material. Good stuff.

@adubbproductions Жыл бұрын

🙏🏾 bless.

@HAIRLADYCARES 3 жыл бұрын

YOU'D BETTER SAY THAT!!! 😂 One of the best REAL intro's for me in 2021!!!

@adubbproductions 3 жыл бұрын

🙏🏾 thank you.

@carlosortiz8916 2 жыл бұрын

I started this business watching yout videos one year ago and I just bought my mt1501. Thank you for the inspiration.

@adubbproductions 2 жыл бұрын

That is really encouraging to hear. We grew together. That’s dope. Congratulations on your new MT. You are welcome. I hope you remembered to use my link when you got your MT. Lol

@Ernestoysu7mmremmag Жыл бұрын

What is the price for the MT1501?

@ronmayo4041 Жыл бұрын

I have 30 years as an audio engineer, freelance producer and 7 years video editor. That said I can't number the amount of times I delt with people who didn't, or refused to apply thier selves to thier craft. I completly understand. I'm now in my new journey in apparel decorating and have been following you for about a year. I wanted to take a moment to say thanks for the value you bring, the energy you exhibit, and instruction you provide. Your work ethic is admirable and gave me confidence to try this craft.

@heatherconte5445 Жыл бұрын

I love your honesty and that you stick to your integrity no matter what. You are right on. People want things to work quickly and they wont admit when they are wrong. They dont want to put in the work to learn how to PROPERLY use equipment. They dont want to do their own research, read owners manuals, nothing. It's sad. I'm glad I found your channel and can trust what you say.

@nycvideos1260 Жыл бұрын

thanks for the vidios bro

@adubbproductions Жыл бұрын

No problem. Thanks for watching.

@terry68jenner 3 жыл бұрын

You put it perfectly. Nice one

@adubbproductions 3 жыл бұрын

Thank you. 🙏🏾

@queenniyahbingai9347 Жыл бұрын

I know I'm chiming in over a year later according to man and time but dang. It was crazy seeing you like this in a video. I just had that same conversation with my students today. Y are you here and if you don't want the info oh well. I appreciate your videos. I am strongly considering this machine.

@adubbproductions Жыл бұрын

It’s ok. It’s never to late to comment. It’s been over a year and guess what, still working. I have the Mt1501 2 em1010s and a Mt20028s. All work great. Don’t let ‘em lie to you. Be patient and you will figure it out just like me. It’s a learning curve but once you get over that hump. $$$$$$ check my more resent video and see where I am now and all these machines have done for me. Don’t let ‘em lie to you. Do T forget to use my affiliate link when you buy to please. I appreciate it. 🙏🏾. Talk to you again soon.

@mistylaneembroidery399 2 жыл бұрын

Love my Ricoma EM 1010!!!!! I even named her Shirley! 🥰

@sunshinemarie3550 3 жыл бұрын

Lmbo🤗🤗listen it’s so funny I bought a Pe625 watching your videos..started making things then decided wait I bought the wrong machine bcuz I’d like to do larger projects (without a hoop reposition ) 😆😆 this all within 3months ive recently purchased Pe800 LOL... the thing is we take these machines out of the box and expect them to instantly do all the things we’ve seen🤣🤣I did I’m learning and making mistakes nesting, thread breaking, and missing stitches bcuz I didnt use the right stabilize 😑 trial and error... thank you for your content it helps me GREAT 😊

@adubbproductions 3 жыл бұрын

No problem. Thanks for watching.

@gericook6030 11 ай бұрын

Wonderful job. Love the it embroiders

@adubbproductions 11 ай бұрын

Thank you.

@87valeriemoore 8 ай бұрын

Great video!!!

@adubbproductions 8 ай бұрын

Thank you.

@samshannon6448 2 жыл бұрын

Looks great

@soundgeniusrecordings Жыл бұрын

I had to follow you bro!

@raybrooks7746 7 ай бұрын

Lmao your video I stumbled on and man lmao you had me rolling I am thinking about taking the embroidery plunge and researching...... and alot of the research I've done seems alot of haters on rincoma machines but four reviewers are spitting the same thing you did. Hats off for honesty.

@babysweet8903 3 жыл бұрын

I looked up the Mt 1501 and it's amazing I love it . It's a beautiful machine. And then I saw the price and I looked over at my husband and said back to the pe 800. ☹☹☹

@fasloan 3 жыл бұрын

I love my mt1501...I had a lot of human errors in the beginning but I learned and still learning. I learned in your last video to do multiple images on the screen...thanks for that and more

@adubbproductions 3 жыл бұрын

I did too. I’ve made mistakes and learned with every piece of equipment I own. Problem solving is actually the best way to learn. More videos to come. With more tips and tricks. Stay tuned. Thanks for watching.

@harmony4422 3 жыл бұрын

No one talks about user error which is the biggest reason why people have so many issues with these machines, especially in the beginning when you're tackling the learning curve. I made sure to highlight that in my own video because no one talks about it but then you have people going on KZfaq trash-talking machines and companies. I know there are some legit complaints from seasoned embroiderers out there that do genuinely have machine issues, but I've seen too many videos where the problem is just user error.

@adubbproductions 3 жыл бұрын

Couldn’t have said it better. Thank you for watching.

@HH-cw1tl 3 жыл бұрын

You had me rolling 🤣, thanks for video's, some folks just have brick between there ears.

@adubbproductions 3 жыл бұрын

😂😂😂😂 when I rewatched it before i posted it I almost didn’t post but I’m glad I did. Smh. Tunes are changing not. They are trying to change to fit there agenda like i tried to disrespect the other creator. Smh. It’s always gonna be something when people dislike something for what ever reason they have. Just makes no sense.

@beardedelephant3023 2 жыл бұрын

Bro these folks gotchu heated. Don’t sweat that ish my guy. You know what I like about your videos? You’re a humble creator that not afraid of your own humility. Not afraid to show your mistakes, learn and grow. Talking to Ricoma as we speak. Good look bro.

@johndoeee888 Жыл бұрын

Watching this 2 years later. Alot of people need to watch this.

@ShowXE04 3 жыл бұрын

Watched only a few minutes past the info of this video, thus far. Sure the entire video will be useful. Actually purchased one using your affiliate information. So keep the videos coming, please. I’m locked in.

@adubbproductions 3 жыл бұрын

🙏🏾 I got you.

@mrniceguyj17 3 жыл бұрын

Well said!!!

@adubbproductions 3 жыл бұрын

🙏🏾. Thank you.

@babysweet8903 3 жыл бұрын

Thank you I will.

@kathyskiles5396 2 жыл бұрын

I just bought this machine, before seeing your site. Don’t listen to these negative people. They are just jealous. If they were in your spot they would do the same thing. Your videos are great. I look forward to learning this machine through watching your videos. Keep up the good work and for encouraging all of us that we too can do this!

@1Heimat Жыл бұрын

Hi there, I just now found your videos! I have not watched any other video prior these 2 videos about the MT-1501. I was looking for some input on the ricoma machines overall. I really liked your comments at the beginning. I never learned anything about sewing or embroidering from anyone in my family or from friends. All I know (and that is not much) I learned from videos. I don't know if I will ever be able to effort one of those wonderful machines but I love to learn and can't wait to see more of your videos. Oh, btw I am from Germany and don't even know yet if I can get those machines here. But maybe one day!!! Good luck for all your coming videos.

@karenmattingly8527 8 ай бұрын

What made you decide on a Ricoma ? Im sure you considered several.. Enjoy your content and knowledge. You are very articulate.

@countrybreezefarms 3 жыл бұрын

Keep the vids roll'n!! You're ROCK'N it and ta hell with the nega nellies

@jailove71jailove Жыл бұрын

I did not know that you were this funny. You are hilarious. When you said haters come on I was laughing so hard. You made valid points. If you see that it is working why would you say that the machine does not work? That makes no since at all. Keep on progressing. I am very proud of what you are doing. I have learned a lot from you and tell my husband and son about you all the time. I also share your videos with them. Haters are going to hate sometimes they push you to do even better without even knowing it. Allen you are amazing! Keep looking up and trusting God!

@adubbproductions Жыл бұрын

Thank you so much for watching and sharing my videos. God is good. I appreciate your encouragement and support. Thank you.

@CheBesDesignBox Жыл бұрын

Just got a MT-2001 and it is definitely a different beast from my Brother 10 needles...but I am willing to learn :)

@adubbproductions Жыл бұрын

Hang in there. I think I’m gonna do a live today adjusting the tension it will be so very useful. Make sure you tune in or catch the replay.

@RadiantRose217 3 жыл бұрын

He said what he said! Be your own judge, don’t let others sway your opinions on what they think of feel about things.

@adubbproductions 3 жыл бұрын

🙏🏾

@tawanashorts744 Жыл бұрын

I like you brother and I admire you and your dear friend Katrina. You both appear to know the King. I'm late late but I just got approved to purchase the 1501. I'm gonna tell you the truth, I'm a little intimidated but with prayer I'm going for it. I'm not a spring chicken and I'm not an old Poop either. Well, just 72. Still I wanna have my own business. I will be following you closely and know that in time I'm gonna do this. Thanks for your teachings and I know that you're a man of integrity. I Love You and your girl Katrina. Love her Spirit too. Be Blessed "Ms. Tawana" PS: Man I'm sorry I wasn't in the mix when you were giving out the free Silhouette cameos but I will still buy your hat.

@adubbproductions Жыл бұрын

Thank you Tawana. I really appreciate it. It’s never to late to start anything. I got you. If you need a video to understand anything let me know. Even if it’s a step step on how to do your first embroidery I got you. Let me know.

@bnsabella1 3 жыл бұрын

Haha! You are so right! Love the video😂😂

@adubbproductions 3 жыл бұрын

🙏🏾. Thank you. Thanks for watching.

@Fishandspaghettishow 3 жыл бұрын

Factz bro , I bought the tension gauges

@adubbproductions 3 жыл бұрын

Tension gauges? I need to look into that. I think I need that. Thanks

@Fishandspaghettishow 3 жыл бұрын

The digital one is cool but the original bobbin tension gauge changed the game for me

@MrJunray14 3 жыл бұрын

@@Fishandspaghettishow can you elaborate? The original one? Have any link? I'm looking into buying one.

@michaelqdoba 3 жыл бұрын

Hey Allan! Always enjoy your videos, have learned many things and have been entertained as well. Frustrated watching this video, hearing what you have to deal with. You are throwing out tons of things, why can't people take what they want, leave what they don't and walk away. Oh, and how about a simple thank you for taking the time? People are dumb, if they don't like it, change the channel. I do have a question... What is the price range for this machine? Hang in there my friend and keep up the great work... Appreciate you!

@anthonygreaves4998 2 жыл бұрын

A-Dubb, thank you for bringing all these great educational videos You already know there's always going to have some of those people that has absolutely nothing better to do but try bring others down to their level. just hang in there and do what you do brother. I have a question for you sir. Am about to get the Ricoma MT-2001-8S embroidery machine and was wondering how do you come up with your pricing for embroidery. What method you use for calculating. Thanks in advance for any help you may be able to offer.

@adubbproductions 2 жыл бұрын

Hey, thanks Anthony I appreciate that. Wow the MT-2001-8S. Amazing. Please use my Ricoma link when you are ready or mention my name to your sales rep. I actually made a video on pricing. Check it out. kzfaq.info/get/bejne/r6xgdqp8vMidkXU.html

@adubbproductions 2 жыл бұрын

The only thing i forgot to put in the video was the Embroidey time calculating formula. Number of total stitches in a design divided by the stitches per minute (spm or speed) you are running your machine equals the amount of time it takes for that design to embroider out.

@anthonygreaves4998 2 жыл бұрын

@@adubbproductions Thank you for the quick and most informative response. I am in the South Florida region (Ft. Lauderdale) that’s literally 35 minutes drive from Ricoma. Yesterday, I had a meeting with Southpoint Sportswear but ended up in Ricoma parking lot next door and didn’t realize it until watching this video last night and you mentioned that Ricoma was in South Florida. I looked up the address to realize I was there earlier. Had I known, I would have gone in for a viewing. Anyway, I will be talking to a sales person today and will definitely mention A-Dubb Production. Again, thank you very much, for keeping it real, your videos has been a big help

@deescustomcrafteddesigns4744 Жыл бұрын

The fact that you even had to break that down to adults is mind blowing as you say. Folks have made it normal to be judge mental on a personal level vs paying attn to the facts you give on the products and experience you have with them

@IMBCUZUR 3 жыл бұрын

Wow, that is an awesome machine. Can you give an example on a thicker material such as leather or vinyl.

@adubbproductions 3 жыл бұрын

It really is. I’ll be doing leather soon both a leather belt and a jacket. Here is an example on shoes. Chuck Taylor’s. kzfaq.info/get/bejne/or1pYJuJ2Nmvf58.html

@jesssafarik8678 8 ай бұрын

I just watched a video of some guy saying the Ricoma is super loud, it sure doesn't seem that loud. Thank you for your video's, I have been so confused trying to compare machines.

@adubbproductions 8 ай бұрын

Load. Lol. People complain about weird stuff. It’s a commercial machine it’s supposed to be load. It’s a heavy meta frame with needles moving up and down at 1000 stitches per minute. Idk. Either you wanna make money or you don’t. Of how loud a machine is is the thing preventing you from starting a business then idk. Go work at the library. No but seriously. All commercial machines make noise. Even though they are fun to play with these are not toys

@Jessiesilverliningembroidery 8 ай бұрын

@@adubbproductions Yeah, was just concerned about purchasing a 15k machine and then not being able to run it because my neighbors are complaining about the noise. Appreciate your response.

@neversurrendernevergive-up7988 3 жыл бұрын

TRUTH! 💯👍🏾

@eddie89104 Жыл бұрын

Second comment I do about embroidery…. I am a master seamster I sew from very rigid scuba webbing to spandex or silk. I know for fact that if the tensions its not proper thread braking and needles will occur 95% of the time. Did a lot of research 🧐 and ricoma was on top of the list but then I saw many videos of people getting frustrated then I was like maybe it’s not a good machine, but Ricoma kept showing up and I noticed the two video I watch before you they weren’t doing the proper tension and and proper placement on materials. So I’m going to give it a chance knowing what I already know. Thanks for your video

@cindytimmons1447 Жыл бұрын

Don't let it get to you. I've been an embroiderer for 25 years, and also service machines. They all have different bells and whistles, but they do embroider. I do like some better than others, but that is a personal preference. The biggest issue I've seen through the years is people not learning how to use them. It is not plug and play, it's a craft. You have to put the effort in, and it takes time and patience.

@rhondameeks6867 11 ай бұрын

I understand how to choose my colors because the colors shown on the embroidery machine isn't going to be the same as you have on your machine. I do t have an issue with this I have an issue with learning how to dizitize

@marquitaphillips677 3 жыл бұрын

I have a bai 12 needle and I'm going thru the same thing. People dont believe I got it from alibaba. They think it's not a good machine but it is a work horse. It's crazy how people doubt a machine that you clearly show them works.

@adubbproductions 3 жыл бұрын

Exactly. Once their mind is made up that’s it. There is no turning back and what they are seeing can’t be real. Maybe it’s special effects. 😂😂😂😂😂😂

@smane2129 2 жыл бұрын

Hello there. I am new to the world of embroidery and trying to research a lot before I buy my first embroidery machine. I have been looking at ones on alibaba alot but hard to find reviews on them. Can you send me a link or the model name you got and have you found its the same process as these ricoma machines that A- Dubb shows ? Thank you in advance

@marquitaphillips677 2 жыл бұрын

@@smane2129 I have a Bai 12 Mirror 1201. If you have Facebook there are several Bai embroidery groups. You should join them to ask questions. The end result is the same as the ricoma but the way to get the is different. Different operating systems.

@smane2129 2 жыл бұрын

@@marquitaphillips677 legend thank you so much

@martirismaldonadomaldonado569 Жыл бұрын

Be proud of what you are doing and what you are and have accomplished, I'm enjoying your videos and your honest feedback , 😊 🙏 😊 don't worry and waste your time with people who envy you 😉

@adubbproductions Жыл бұрын

💪🏾 Thank you. 🙏🏾

@rhondameeks6867 11 ай бұрын

That is what I am trying to learn and being taught is HOW TO DIGITIZE?? DO I NEED TO GO TO COLLEGE TO.LEARN HOW TO DIGITIZE? WHEN I BOUGHT THE MACHINE I WAS ASSURES DIGITIZING WAS VERY EASY. I AM WILLI G TO PAY TO LEARN OR READY TO SELL MY MACHINE FOR A LOSS

@adubbproductions 11 ай бұрын

Have you looked for videos on how to digitize. I have quite a few on this channel. Digitizing is no easy. Who ever told you that did not tell you the truth. No one can assure you anything is easy. What is easy to some might be difficult to others.

@jenniferhancock-zf7cq 2 ай бұрын

You hit the nail on the head. People are lazy and want everything easy. Thanks for the videos

@scratchx26 Жыл бұрын

Love ya videos man !!! Fuck the haters !!!

@exeptionalg2186 Жыл бұрын

Anyway of getting the Metal Band on the hat ring to reach the lock to tie down your hat on the hoop station. Love to know how if you can help would be great. Thanks Dre

@adubbproductions Жыл бұрын

Why would you want to do that? The hat hoop clips into the hooping station. They would you want the metal band that is used to lock your hat down to clamp onto the actual station? That’s not what it’s meant for. What are you trying to do?

@exeptionalg2186 Жыл бұрын

@@adubbproductions I probably explained it wrong . I adjusted the lock that you strap the metal band around the brrim to hold it in place.

@pwiley101 27 күн бұрын

Question. Clocked the process around 35 min for the threading. If you order the machine with the double head, does that mean you can do two shirts at the same time?

@LucyLu70 3 жыл бұрын

Good morning Allan. Nicely Put. 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼 I know who you are talking about I actually unsubscribed from his channel. I believe that any problem anyone has with any embroidery machine is user error not the machine. I LOVE my BEAST MT1501 I want the SWD1501 because it has the auto digitizer on the panel. Check out the video Willy made with an Elvis picture blew my mind.. I also did my research on multi needle machines I believe that Ricoma was the right fit for me.. Also the 7days customer support come on. OMG that video your talking about had me confused I called customer support on a SUNDAY thats right a weekend and they answered and we figured it out and I continued with my design. You have a great day Thanks for another awesome video...

@adubbproductions 3 жыл бұрын

No problem. Thanks for watching. Hey we are not all perfect I know I’m not. I hope I don’t but one day I might say something that you don’t agree with. We can have a little debate but if you are getting some type of knowledge or information from the guy don’t unsubscribe. This isn’t an attack on him. I’m subscribed to all his channels he makes great content and outs work into it. It’s just my opinion that he made a bad call and with all the people in the comments referencing his video to me in why it’s not a good machine I could not avoid addressing it. Thanks so ouch for watching, i appreciate you.

@beckymitchell969 3 жыл бұрын

I dislike bullies! A few other KZfaq people that I followed quit because of bullies. BTW I really like that design!

@adubbproductions 3 жыл бұрын

I do too. They are always in my comments trying to discourage me. I do not get it.

@vickyj-lewis1017 3 жыл бұрын

It's sad that some people can be so insulting! I saw that some of them think that you couldn't afford to buy your own machine and think that it was a loan from the company for good reviews! Oh my days! So sad 😞

@adubbproductions 3 жыл бұрын

Right. It’s ok thought. That’s the Internet. I’m not mad at them.

@vickyj-lewis1017 3 жыл бұрын

@@adubbproductions I don't own any of the machines, I just love to watch them work and you've got so much patience! Anyway machines don't do anything, unless they're programme to do the operation!

@UseYourManners123 3 жыл бұрын

I am curious on what contact is that you speak of, “bad contract”. An affiliate contract or some kind of contract you sign when purchasing? Also I was wondering if I’m going to use it for business is there a way to get it tax deductible or tax free? I’m in texas. Not sure where you are it may be different. Ty. Don’t stress too much about this stuff, you do your thing and you do it well. Most people can eventually weed out the truth from an anomaly. I normally watch the female embroidery channels, I haven’t seen this kind of static there. I like yours because you get to the point 😂. Not showing your outfit off the day or make up etc😛. Looking forward to what you do next and how you evolve. I’ll buy a hat!!! 🧢. (Some people don’t think about your good points- now they will)

@adubbproductions 3 жыл бұрын

There is a video on KZfaq of a guy that got an offer and he made a video about what was offered to him. Everytime I make a Ricoma video people in the comments mention that video to me as to say the machine is not a good one and that videos influences peoples decision on whether or not to buy this machine. Any piece of equipment you buy for your business is tax deductible. Thank you for watching and hearing me out. I appreciate it. 🙏🏾

@CarcanStudios 3 жыл бұрын

Allen, don't give in bro. Many people are close minded... if the last couple of years hasn't taught us that tunnel vision is a real thing... lol, Trust is dangerous game and people don't thrust their own eyes until they get burn. Let it go bro... is not worth your integrity. Keep doing you.

@adubbproductions 3 жыл бұрын

🙏🏾 your right. I’ll leave this one right here and move on. Thanks.

@AtkinsEmbroideryPrinting Ай бұрын

Amen on that 👏🏿👏🏿👍🏿🙏🏿

@unique4youllc.55 2 жыл бұрын

Allen I couldn’t help but to laugh. I feel your pain though. Ignorance is frustrating!!!

@adubbproductions 2 жыл бұрын

I just want people to think for themselves and not hop on bandwagons. In the end we as consumers are the ones that end up losing and missing the opportunity to use equipment quality equipment that can help us accomplish our professional goals. I just wanna clear the smoke.

@derrickward8238 Жыл бұрын

facts bro

@adubbproductions Жыл бұрын

💪🏾 They see now.

@WhathephukkTV Жыл бұрын

@@adubbproductions This heat press game is deep and im coming in A-Dubb keep it up 👍

@ecchistitchesakabakasukamu809 3 жыл бұрын

Personally i think that first take of contracts and paperwork does matter bc thats where u put ur money at. Your not just buying a machine ur buying a policy with it. Given i did my research on ricoma, saw a lot of mixed reviews so i avoided it. That was my preference but ive seen good reviews on the industrial embroidery machines and mixed on the home embroidery. I also think there is a lot of user error for all of the machines bc they can be complicated.

@adubbproductions 3 жыл бұрын

All that you said. 👍🏾 valid. Did your research and decided what was best for you. Nothing wrong with that at all. All i was saying in the video is that to me the contracts have nothing to do with whether or not the actual machine works.

@tonybalony6263 Жыл бұрын

Which machine would you buy under 8k and why? Thanks looking for 1 now

@adubbproductions Жыл бұрын

I have no idea. I have never ran anything other than Ricoma and Tajima multi needle machines. You should find a few that you like then talk to a few people that have them and use them. I couldn’t give any good advise on machines I’ve never used and have no experience with. Research the ones that are in your price range then find people that have them and see what they say. Best advise you can get us from someone using the machines not what someone suggests or says that doesn’t have them.

@rhondameeks6867 11 ай бұрын

How do you use the.ricoma machine and how to learn how to use inspire. Because wasn't even shown how to use this properly

@Atmsalsa Жыл бұрын

I’m putting money in my savings account every single day , bc one day I want to buy this machine ! But where can I learn how to use it ? How to put designs into the machine ? Flash drive or what ?

@adubbproductions Жыл бұрын

When you purchase it you get full virtual training from the company. You can take the training as many times as you want. I also have tons of video on how to use the machine. If you’d like a FaceTime consultation i also offer that service. You can schedule a consultation at www.Adubbproductions.com

@Basedgodfrey 3 ай бұрын

I watched the introduction of this video in 1.5x playback this is hilarious

@hooked_fish 3 жыл бұрын

Hey bro Greetings, the breakage of the thread has me super tangled, in my pe800 I go back about 10 or 5 points,. But in the MT 1501 this is driving me crazy because if I press the stop button it goes backwards but when it starts it seems that it is embroidering but it does not lower the needle, because I understand that the machine does not go through the same place 2 times and this you are confused, don't you have a video that explains how to go back and continue embroidering? Thanks