Blacksmithing Tools: Convex fuller

Рет қаралды 185,117

3 жыл бұрын

Top tool to help smooth complicated curves and tapers. 4140 steel, ash handle.
Thanks again for watching. You're Awesome. If you want to help the channel for future videos, my links are below:
All the best,
John Rigoni
Instagram: rigoni_ironworks
www.rigoniironworks.com

Пікірлер: 99

@WiIdbiII 3 жыл бұрын

The best part of the video was the whole video. Gorgeous property too.

@17oslo 2 жыл бұрын

I enjoi your work and I have a small suggestion. Make a small round or square iron logo, then heat it and stamp/impress on the wood handles. It's a 30 seconds job but gives an extra touch in the final design 👍🏽

@desertcoyote3707 3 жыл бұрын

Awesome shop, clean and organized, one can only dream...

@lasanirotavator 3 жыл бұрын

👍👍👍👍

@siegfriedenea 2 жыл бұрын

Of course is clean … this is not a forge, it’s a normal iron factory with modern machines. Nothing is really handmade

@mitchelperkins6723 3 жыл бұрын

Nice clean work John!. Don't know where you live, but it's great to have wooded land to explore. I have 16 acres of woodland on my land with a beautiful creek running through it. Peaceful to just go air and listen to the water running over the rocks.

@noahnipperus7320 3 жыл бұрын

1:16 that 180

@phoenix777bkty 3 жыл бұрын

I like the go for a walk Segway. Sometimes I forget about nature and how important it is to get out of the shop etc.

@user-ft4mg7nk1h 3 жыл бұрын

No way , new and new video. That insane. Blacksmith tool marathon.

@BK_blacksmith 3 жыл бұрын

I am truly enjoying the videos

@captainoates7236 3 жыл бұрын

I'm more of a woodworker myself but I appreciate the excellent craftsmanship. I was just waiting for him to cut the handle flush and hammer in an oak wedge.

@wolfhawaii1 2 жыл бұрын

top tools are usually left loose on the handle

@jackdotzman2908 2 жыл бұрын

You do beautiful work. Very much enjoy watching you do what you do. Thank you for sharing. From Missouri

@marty01957 3 жыл бұрын

Very nice job, RI! Beautiful tool!

@jeevanandham2528 2 жыл бұрын

I like that compact furnace..

@SchysCraftCo. 3 жыл бұрын

Beautiful

@Thejakegee 3 жыл бұрын

Pure and clean!

@KamranHaider 2 жыл бұрын

Thanks a lot for another peak in your work , Master 🥰🙏

@douglasfathers4848 3 жыл бұрын

Learn some thing new in every video . You live in a beautiful part of this Would . :)

@lasanirotavator 3 жыл бұрын

🙄🙄🙄🙄

@abitoffblacksmithing9985 3 жыл бұрын

Again... beautiful work sir!! You and your channel are inspirational and a great asset to the blacksmithing community on KZfaq!!

@vmadhu5501 3 жыл бұрын

Amazing skills and cool job, I love the precision your bring in the job.💐💐💐💐

@shnepper 3 жыл бұрын

Clean work as always

@lyulf0 3 жыл бұрын

A lovely peaceful vid where you get to learn and just enjoy watching the process. Thanks for the video!

@adelheidsnel5171 3 жыл бұрын

Sheer perfection 👌🏻

@gregoryspashett9504 2 жыл бұрын

Very good work sir,and nice shop

@NineWorldsWorkshop 3 жыл бұрын

Really enjoying watching the tool rack getting filled out! I need to do a bit of my own preemptive tool making

@jordis7998 3 жыл бұрын

congratulations, I love your work. A greeting from Barcelona

@jadilsonalvesdasilva7192 Жыл бұрын

Grande mestre ferreiro profissional muito bom excelente parabéns pelo vídeo que Deus abençoe sempre seu trabalho muito bom excelente 👏👏👏👏

@curtisvonepp4335 3 жыл бұрын

That's nice detail work . Trick .👍

@alanpreston3111 2 жыл бұрын

Good in every way 👍🏻👏🏻👏🏻👏🏻

@user-cf9yw6pi8j 3 жыл бұрын

Приятно смотреть ! Профессионально. Спасибо я взял на заметку инструмент на заднем плане .

@armouryal-master8408 3 жыл бұрын

Nice work

@user-hl6zn6fd5t 3 жыл бұрын

Спасибо! Это лучший канал по кузнечному мастерству.

@jawdatfares2831 3 жыл бұрын

I love it,,,,,i love it that was awesome

@georgeraffield4466 2 жыл бұрын

Just beautiful as always I'm being to Think you are a master what you do.

@OuroborosArmory 3 жыл бұрын

Torbjorn Ahmen vibes for sure.

@zygmuntthecacaokakistocrat6589 3 жыл бұрын

You could spell his nmae correctly.

@OuroborosArmory 3 жыл бұрын

@@zygmuntthecacaokakistocrat6589 yep.. iPad issues with autocorrect. Fixed now thanks for catching it.

@lasanirotavator 3 жыл бұрын

Good bro amazing

@user-os3nn2tx1z 2 жыл бұрын

Спасибо. Посмотрел с удовольствием.

@noeljshah1 3 жыл бұрын

Master peace. 👍

@manishburade1162 3 жыл бұрын

Nice job💯🙏🇮🇳

@richardcook555 3 жыл бұрын

Kestrel or wood duck house? Love the smilax along the trail. The smithin' was nice as well.

@mazeni4881 3 жыл бұрын

يطرب صوت الصناعة صوت الآلات يطرب اكثر من ام كلثوم

@giannirocco7492 2 жыл бұрын

A smith from Sweden,I think,does similar video work when he anneals or soaks his steel...

@zygmuntthecacaokakistocrat6589 3 жыл бұрын

Someone's been watching Torbjorn Ahman's videos, haven't they?

@rigoniironworks 3 жыл бұрын

Yeah, his videos are great.

@mrvictor5404 2 жыл бұрын

отличная работа приятно наблюдать

@kaseymathew1893 3 жыл бұрын

Your monosteel projects are beautiful. But what about Damascus? I know it's a lot more work, but I think it would be really interesting. (Also, I like how you took a break to go birdwatching and it's part of the video.)

@rigoniironworks 3 жыл бұрын

Man, I would but this forge doesn't seem to get hot enough. I need to build a new forge to handle forge welded projects.

@j.mcarvalho8050 3 жыл бұрын

Save here of Brasil 🇧🇷🇧🇷👏👏

@vicmiddleton236 3 жыл бұрын

U have some beautiful property... was that a big wood duck box u were looking at from a distance?

@rigoniironworks 3 жыл бұрын

owl box

@Quentin687 3 жыл бұрын

Can we get a shop tour?

@Jose-kf5eq 3 жыл бұрын

Ya hay en el canal alguien que hace sin copiar

@yukeenkape2540 3 жыл бұрын

What kind off style you use to make that hamer ? # ? Pls.

@user-ez8hv3np9w 3 жыл бұрын

а расклинить рукоять молотка ? после трёх ударов молоток слетит.

@user-op8le8bv1u 3 жыл бұрын

真是不错啊

@joell439 3 жыл бұрын

👍👍😎👍👍

@drfiver2 3 жыл бұрын

I'm ignorant, how does the head stay on after the first swing?

@thejacobean 3 жыл бұрын

After watching several of your videos, I wonder how those wood handles stay in place long term. It looks like they are just tapped into place. Once you actually start using these tools, how do the handles not work themselves loose?

@rigoniironworks 3 жыл бұрын

When in use with a striker the handle needs to be "flexible". If it was wedged it could crack/break. And yes, it will need to be driven tight in between heats if loose.

@rigoniironworks 3 жыл бұрын

*These are top tools. Hammers of course need to have wedges.

@GrowthCurveMarketing 3 жыл бұрын

Great stuff. Does the handle not require any further securing by way of a wedge? Also, I'm trying to understand why the annealing step happens after hardening, and not the other way around. Apologies for my ignorance, but I'm learning a lot by watching your videos!

@rigoniironworks 3 жыл бұрын

Thanks, this is 4140/medium carbon, oil quench to harden. I then heat the part to slightly soften/temper it. This reduces hardness, gaining toughness and strength.

@GrowthCurveMarketing 3 жыл бұрын

@@rigoniironworks - Thank you. I'm hopelessly addicted to these videos of yours. Your craftsmanship is obvious, but I also admire how orderly you keep your workspace.

@equinoxproject2284 Жыл бұрын

Regarding the wedge, I believe this a tool that will be struck and not swung so it probably doesn’t need to be wedged.

@oneshotme 3 жыл бұрын

So why didn't you put a wedge in it?? Enjoyed your video and I gave it a Thumbs Up

@rigoniironworks 3 жыл бұрын

Thanks, it's a top tool, no wedge. Hammers get wedges.

@wolfhawaii1 2 жыл бұрын

When did you move to TX?

@lucarossi6495 3 жыл бұрын

Hi, rigoni sei italiano per caso? Where do you Have buy the power hammer?

@rigoniironworks 3 жыл бұрын

Sahinler, Turkish hammer.

@williamcunha9136 3 жыл бұрын

👍🇺🇸👍

@jawdatfares2831 3 жыл бұрын

❤❤❤❤❤❤❤❤❤

@mistaksinfo2153 3 жыл бұрын

Great sir,where are u from.

@rigoniironworks 3 жыл бұрын

My shop is in the U.S. in Texas.

@mistaksinfo2153 3 жыл бұрын

@@rigoniironworks Your method is very helpful to me,do u know ,,Urdu,,language

@garagewizzard 3 жыл бұрын

Is there such a thing as a concave fuller?

@rigoniironworks 3 жыл бұрын

haha, prob not. I needed the tool/shape and couldn't find a similar one online. Basically, a rounding hammer you can hit.

@mitchelperkins6723 3 жыл бұрын

Actually yes there is. Brian Brazeal makes them. I did one as well. It is a top tool used with a drift in the eye of top tools. When releasing the tool from the drift, or when forming the faces of a fuller for making fuller troughs in hammers, it forges the struck end of the top tool to a slightly rounded shape. Or relieves the edges of the struck end. Easier to forge that shape in than to have to grind it in. Also being forged it gives the struck end more life than grinding it.

@user-rf5lq1jr4h 3 жыл бұрын

И сколько же стоит такой инструмент ?

@OTMANEDOMKS 3 жыл бұрын

😊👍✌👍💚

@ulugbekmuhitdinov2663 3 жыл бұрын

Assalomu alaykum 👍👍🇺🇿Uzb

@jawdatfares2831 3 жыл бұрын

❤💚💛❤❤❤❤❤

@aquilaaudax6033 3 жыл бұрын

🇦🇺🇦🇺🇦🇺

@Brandon-so9fp 2 жыл бұрын

My daughter and I have a bet, I think he was an engineer and she thinks he was a pilot? Anyone now his occupation before blacksmithing?

@rigoniironworks 2 жыл бұрын

Ha, nope. Marines 99-03, then college/classical studies. Now I'm a fireman and run my shop. I watched my Dad as a kid work a metal lathe/do woodwork, so always been around machinery.

@Brandon-so9fp 2 жыл бұрын

@@rigoniironworks your attention to detail and workshop organization makes sense now. We were way off dang losing my touch.