Road King Special Handlebar INSTALL

Рет қаралды 292,988

6 жыл бұрын

Road King Special gets Handlebars this week! Harley-Davidson released the Road King Special in 2017. It was the beginning of the blacked out touring bikes that we have come to know for 2018. The only problem? They come with the worst bars to ever leave the York factory! No worries, though. This week the baddest touring bike in Harley's lineup gets a new set of bars, just in time for riding season to come back!
Handlebars: 1 1/4" Buffalo Touring Bars made by Drag Specialties.
www.dragspecialties.com/produc...
Riser: Made by Wild 1 Chubby, this riser is used to allow fitment of a bar that steps down to 1". Required for use on bikes that come with a 1 1/4" riser (Road King Special and 2015+ Road Glides).
www.dragspecialties.com/search...
My Music:
In general: www.epidemicsound.com
This video: "Poison Rain"
"Car Chase Rock and Roll 5"
"Change"
"More than Two"
Camera Gear:
Camera: amzn.to/2C1zEJm
Lens: amzn.to/2C4ozHK
Microphone: amzn.to/2Cr2wXa
Tripod: amzn.to/2CpiqBB
Tripod head: amzn.to/2Hn6oMH
The tripod and head are sold as a kit, too. Check the pricing!
MotoVlog Gear:
Helmet: amzn.to/2Fay4DZ
GoPro: amzn.to/2ByYMpQ
GoPro curved mount: amzn.to/2GkTvRW
Mic adapter: amzn.to/2BxYCyZ
Microphone: amzn.to/2Hok5Ld
Fur for mic: amzn.to/2ExMfpj
Extra GoPro gear:
Jaws: amzn.to/2CpM35K
Swivel mount: amzn.to/2Favjm1
Head strap: amzn.to/2HmDw7r
GoPro tripod: amzn.to/2Hn1q2s
Thanks for Watching. Like and Subscribe!!!
Where I work:
WEB: www.chattahoocheehd.com/
FB: / chattahoocheehd
Follow Me:
WEB: www.theharleytech.com
IG: / theharleytech1903
FB: / theharleytech

Пікірлер: 524

@waynemaccluskey4690 5 жыл бұрын

It's great to see someone who shares the same passion as I in doing things the RIGHT way! True sign of a great tech! Keep it up John. Your videos are awesome!!!!

@sharkzf6 6 жыл бұрын

I dig the bars on my stock 17 Road King! I did install Magnum grips...yes, always do left before right...

@jaydoucette3353 4 жыл бұрын

I agree, the road king special is an awesome platform. I’m waiting on my 1.5”x16” apes to come in for mine now, just installed the la pera Bare bones yesterday. I still have much more planned for it.

@glanemann 5 жыл бұрын

Watching your videos is therapeutic and relaxing in a way. Good stuff.

@twolaneblacktop8034 6 жыл бұрын

Love the RK Special best looking spec in the RK line up no doubt. Using an old pull chain for stringing wires is a great tip.

@TheHarleyTech 6 жыл бұрын

It makes it super easy. That’s a tip from an old instructor.

@joswaldomendoza 5 жыл бұрын

Thanks for the video Johh, btw watching it made want to go upgrade from my Fatboy Super to a 2019 Road King Special. Best upgrade ever!

@BloodShotAirbrushing 6 жыл бұрын

Nicely done!! Gotta love the upgrades!! Cheers Broski!

@jennifersumerix308 6 жыл бұрын

John, your vids are awesome, love watching and also the music you add. *thumbs up*

@jetag93 6 жыл бұрын

Great channel you've created. Love seeing behind the service doors of a Harley dealership. I think I may try this as a second career down the road. Love working on my Street Glide Special!

@TheHarleyTech 6 жыл бұрын

It really is a fun job. Thanks for the channel love, I’m having a great time making the videos, too. It’s a double whammy of good times at the dealership these days, haha

@2hotFL 6 жыл бұрын

Not wild about the new bars myself but you did a great job on the install. Like his speedo with the tach combo and I keep meaning to get one like it for my Night Train, I just never seem to get around to it. Keep the videos coming, love them.

@Seven.And.The.RaggedTiger 5 жыл бұрын

I love my Road King.. it's a 2000 with the TC88 but alot of xtras including extended long rear fender and bags,Vance and Hines exhaust and much more.. best money I've spent

@TheRooster1122 6 жыл бұрын

Sweet video John! Thanks ....(I’m ready for Spring) .....RIDING WEATHER MAN.....

@jamessouthworth1699 6 жыл бұрын

I did bars on 2 of my Harleys. Not real hard but very time consuming to extend the wires, and i didnt even run inside the bars. Props to this guy for the hard work of running the wires inside the bars.

@stevenwaller192 4 жыл бұрын

Hey John. I liked the use of the torque wrench for proper install! 👍

@fonso22 6 жыл бұрын

I just stumble across your channel and you have very good quality content. Subscribed 🤘🏼

@matt8863 5 жыл бұрын

14:15 I love that you guys over there are "thinkers"...Smart. Btw - Nice clean work.

@deaconl7552 5 жыл бұрын

Enjoy watching your videos. I watched this one again, to try to see if I could shed some light on an issue I have with my 96 Road King. My handlebar star/ kill switch has been acting up. Works sometimes, fuel pump kicks on when the run switch is on, just wont start when the switch is pressed.

@drummerdm1016 6 жыл бұрын

Looks great, love the new bars nice job man.

@twomontess 6 жыл бұрын

Great job once again. I like my stock bars. Don't think I'll go through all that any time soon.

@TheHarleyTech 6 жыл бұрын

I hear ya! Glad you like what you have. It’s cheaper that way!

@moldmaker1 6 жыл бұрын

John, I’m new to your channel. Love the install videos brother. Love the channel keep the videos coming

@michaelferreira9722 5 жыл бұрын

So,done doing the job right by the customer and a great finished look!

@cluuck4617 6 жыл бұрын

One of the reasons you get the accessory catalog with ever new bike...going to add up my additions one day.

@billys.worthy6756 6 жыл бұрын

Awesome of you to show how things are done. great editing.

@TheHarleyTech 6 жыл бұрын

Thanks man!

@geoffozevans4500 6 жыл бұрын

I really li,e the Freight Train nacelle, might get one for mine about 350 pound though over here, everything for HD is expensive. You're doing great with your subscriptions John, well done amigo😎👍

@fatguy8067 6 жыл бұрын

I agree with You John, the RK Special is awesome, took one for a test ride really, really liked it, Your vlogs are interesting and entertaining, keep them coming.

@TheHarleyTech 6 жыл бұрын

Glad you’re enjoying the content! I legit thought about offing my bikes for the RK special when it came out last year. I just don’t ride enough right now to make sense of a payment! Kids ya know!

@MrDieseldog 6 жыл бұрын

Awesome videos with a ton of info.....real pleased I came across your site couple months back and subscribed,keep those videos coming John.I ride a 03 Road King had it from new and still going strong just cant afford one of these Special's at the moment, but on the wish list.A big howdy from New Zealand to you all.

@TheHarleyTech 6 жыл бұрын

Thanks for watching the vids! Glad you’re enjoying them. Glad the King is running strong!

@matthewclifford7504 6 жыл бұрын

I can not thank you enough for this video. I had a problem with my handle bars getting a tad loose. Always heard how hard it was to do anything with handlebars on a Road King, Well thanks to your video, me and my brother took everything off tightened my handle bars and had it all back together in about 30 minutes. Thanks!

@TheHarleyTech 6 жыл бұрын

Awesome!

@jase5142 5 жыл бұрын

I’m going to install 12 “ Malo on my 2018 RKS, and this video is just what I needed to get the job done! Thanks JM.

@disciple777 5 жыл бұрын

do you need wire extension to install the 12" malo or signature on a RKS

@thedgepath1 5 жыл бұрын

Added a front headlight trim ring to my 2014 Street Glide. Standard US screwdrivers didn't seem to fit the single screw they use to tighten the trim ring. Found that a Japanese spec screwdriver fits perfectly. Didn't realize the difference till I had to tighten that particular screw. All after about stripping it and cussing. I worked on med stations for hospitals and that's where the specialty tools came in.

@abgood123 2 жыл бұрын

On a different note...I love your shop-mates "cup technique"! Im going to start leaving the drink tray on the cup from now on 😉 Very classy 😎

@adamparker5093 5 жыл бұрын

I freaking love the music on this video. Also I learned a hell of a lot. 👍(Big dirty thumbs up)👍

@tonecontrol3271 6 жыл бұрын

Tip: I've used dawn dish soap to slide the cables through. Just a tiny bit on your fingers - slide the cables through fingers the entire length. No mess and keeps the inside of the bars clean ;)

@evadvalcourt 6 жыл бұрын

I live in Canada but i would definetly go to your shop to have anything done on my bike. Great tech !

@TheHarleyTech 6 жыл бұрын

Thanks man!

@asutcliffe25 5 жыл бұрын

everytime i watch these videos i find myself on the harley website looking at shit i can't afford lol

@asutcliffe25 3 жыл бұрын

Good thing I'm not on Instagram

@uboofer5466 6 жыл бұрын

Great video! Looking forward to changing out my SGS bars with something different. Not sure with what yet though. Got a different question for you. What are your thoughts on the tranny to primary fluid transfer issue (TA0022) and the sumping issue (M1450) on the M8? I love mine and at this stage I have not experienced any the issues on mine. The only issue I ran into was a defective lower pushrod cover which was replaced by warranty. Keep up the great videos!

@scottwilloughby3840 6 жыл бұрын

lot of work great video all your videos are real well done thanks again keep em coming

@TheHarleyTech 6 жыл бұрын

Thanks man! Glad you’re enjoying them!

@petef.4688 4 жыл бұрын

I like the fender and tank guards you got for working

@guitarded306 6 жыл бұрын

I have a 2008 Road King Classic and I'm wanting to get taller bars. I have 16s on my other bike and really like them but I don't think I want to go as high. I was thinking 12s or 14s for the RK. What are your thoughts and at what point do I need to replace the lines on an '08?

@brianflint7219 5 жыл бұрын

Going to install 14" Marlo on 2017 road king. What wire or cable extension's would I need if any. Thanks.

@cchavira84 6 жыл бұрын

I don’t know jack about mechanics and I didn’t learn squat from watching this video but man, I’ve never enjoyed a shop video like this! The editing is great, the commentary is fun. You rock! I subscribed and look forward to more.

@donaldremington3737 5 жыл бұрын

You can do it !! No special tools required. Just lay stuff out carefully as you disassemble . You can find bars at a swap meet for bargain prices. Great confidence builder !

@izreal47 5 жыл бұрын

Donald Remington m

@imgzrona09uc72 6 жыл бұрын

John, off topic but relates to wiring heated grips on older models. What is the way to release the secondary lock (orange part) of the fuse box to insert the switch relay wire into said fuse box? Any chance of a video? I gave up and tapped in to that wire at the accessory switch. Thanks Bob

@naui_diver9290 6 жыл бұрын

Whats the center to center distance for the riser bolts in the triple tree?

@jc8061 5 жыл бұрын

John freaking awesome video. I do have a question. I just purchased an 18 RK Special and bought 14" FMB Chopper Mercenary Apes. I also purchased the HD Wiring extension. Plus how much length should I buy the Brake/Clutch lines? Would I need a throttle extension as well? Any specific vendor you recommend?

@michaelmartin2896 6 жыл бұрын

Love the New Road King

@robbkvitek1301 5 жыл бұрын

Hey man. I'm installing 12" apes on my '17 Breakout. Do I need to get a new bottom break line? Thanks, your videos are great!

@WheelzupMotorsports 6 жыл бұрын

Hey John. Totally off topic but how hot should a big twin get at the heads What do you think about putting on love jugs? Rushmore touring if it matters. Thanks for all the vids man!

@joevandivner9704 5 жыл бұрын

Great video. Lots of very good info thank you. One question I have is tho on the 14 later touring can u do 12” bars without changing cables or do u need to change them on 12” and higher? Thanks keep it coming and ride safe

@Bayonachris 5 жыл бұрын

Joe Vandivner id love to find out myself

@tyee4u 6 жыл бұрын

Big thumbs up man. Great video. Anyone who bitches about the 6 hr labour charge to do this swap should watch this video. You nailed it on the stock bars on this bike. I’m convinced they are a bad joke by the engineers at HD. I ride the same bike and a set of Arlen Ness 13 modular bars were the first thing I swapped. Looking forward to more vids. 👍

@The_Lost_Alaskan78 6 жыл бұрын

It's rare to find people like you who actually like working on stuff. Yeah its a job and work sucks but you are good at what you do.

@TheHarleyTech 6 жыл бұрын

Thanks man. It’s only kinda work. Mostly it’s just fun. Glad I have the opportunity to share it!

@fatbob785 6 жыл бұрын

Great video as always john

@MrOatmeal5150 6 жыл бұрын

Power tool POV!!!! That's a first I've seen! A+ on them there filmin' skills!

@TheHarleyTech 6 жыл бұрын

Thanks man!

@speedyspeed8492 6 жыл бұрын

Yeah those stock bars suck I've ridden one they're very uncomfortable and they looks stupid as hell. You did a really good job man you make it look easy most of the mechanics in the Chicagoland area cry about doing handlebars. There's a lot of mechanics that don't know what the hell they're doing but I will give it to you man you are on top of your game. I know I commented about this before but I think it's great that you cover the tank and fender I've been to every dealership in Illinois and I would say I have been in the back more than half of the dealerships and I've never seen them cover those parts. I wish you were in my area I will tell you this I would not be nervous at all having you wrench on my bike Your dealership is lucky to have you.

@TheHarleyTech 6 жыл бұрын

Thanks man. I cover stuff if I’m working over it. I’ve had a few comments about not covering the tank, but why cover the tank when doing a rear tire??? Everyone at my shop hates handlebars, too. I love them and hate motors, haha. So it works out. They do motors, I do handlebars!

@toddculp3666 5 жыл бұрын

do you have the part number or source of the electrical extension kit you mention as being cheaper at Harley?

@ryansullivan6950 5 жыл бұрын

What size clutch and brake cables do I need to get for 14” apes?

@medericdarval7487 6 жыл бұрын

Hey John , quick question for the handle bars. I want to put them forward like you said put your wrist in an awkward position for your hand controls. Just wondering how you took the nacel off. riding the 2018 Road King special. Thanks. Love your videos and give you dirty thumbs up

@nlavertue 6 жыл бұрын

Envious of the fender and tank protectors during the job. Man, I could use those!

@frtygoat40 4 жыл бұрын

What is the tallest Apes I can install on a 2003 RKC and still use all the factory stuff ?

@hatersaywhat8986 6 жыл бұрын

09 RK, installed 16 edge hangers and ever since it has a really loose wobble between the riser and neck? I've changed it to a billet one but still has the same movement. My local Harley says to get rid of them but I've already invested a lot of money. Any suggestions?

@stanleyzambalis7990 5 жыл бұрын

I agree..my 2017 RKSpecial bars are the right height just need to tweak the ends in a bit. Anyone know of a replacement. Local dealer has no answer.

@JamesMatthew-Zero79 6 жыл бұрын

Have you done tbars on a RK? I want to put some on mine but haven’t found a clean solution to that riser cover. Any thoughts?

@TheBigpappa160 6 жыл бұрын

Hey John, I have a 07 Ultra Classic and I want to change stock bars to 12" bars. Any quick tips? Also, would I have to change brake line, throttle cables or clutch cable?

@dieseljunky8505 5 жыл бұрын

How long did it take you to install them? And how much does the shop charge?

@slyguyaction 6 жыл бұрын

Great vid John. Hey, I really liked the lower rpm of the Milwaukee 8 but missed the shake of my 103. Is there a counterbalance delete kit for the M8 to get the shake back? Thanks again.

@TheHarleyTech 6 жыл бұрын

Nah. I think the shake is gone. Word on the street is that they actually counterbalanced it more than what it is now. They had eliminated all shake, took some of that weight back out. I guess really they probably developed the softail version, and realized that wasn’t as desireable for the touring frame.

@pmjn0943 6 жыл бұрын

I like all your videos John. keep em comin,

@TheHarleyTech 6 жыл бұрын

Thanks man!

@rexalvinland2667 4 жыл бұрын

nice I have a 04 road king converting front fairing to streetglide how can I find adaptor for handhandle bar electrical turn signal lights starter stereo please help

@christopher2399 3 жыл бұрын

A job well done. Was just wondering how long did it take to change the bars out what would a job like that cost?

@davidknows3320 6 жыл бұрын

Good video. I'm changing from beach bars to Tallboy bars on my '05 Road King now. Similar, but different.

@TheHarleyTech 6 жыл бұрын

It is similar. Same concept, but you have a lot more wires!

@RomansRoad0326 5 жыл бұрын

Do you know the part number for the Harley Davidson wire extension???

@davidcarroll7193 6 жыл бұрын

Great videos love to watch and be informed as well. I have a 08 king how high can I go without having to replace lines and cables ?

@TheHarleyTech 6 жыл бұрын

There isn’t too much extra on the 08s. Pretty much any bar change is gonna take changing cables, too.

@Pokagon 6 жыл бұрын

Great video man. Keep up the good work. I was checking out your dealer website, you guys have a lot better service rates than here in Michigan.

@TheHarleyTech 6 жыл бұрын

For sure. There aren’t too many cheaper than us.

@matthewsjourney2064 6 жыл бұрын

Larry may i ask what part of michigan you are from, i am in the flint area

@Pokagon 6 жыл бұрын

Mattew Rexford I'm not to far from you I'm just down the road in Brighton.

@ejlarumbe3069 5 жыл бұрын

Dayaum John!! love the video, looking good bro. Giving you a big dirty thumbs up. See you in the road if I come back to Columbus one day! btw: if it the same pain for a beach bar??

@CastingFaith 4 жыл бұрын

Could you elaborate on depinning the right side wide black clip? I really had a hard time getting the pins out, one of my molex clips came off. I flipped the stop open and tried with a wire to get them out but really had a hard time. Do you depin from the front, inside the molex connector, on top of? Etc?

@rushforce33 5 жыл бұрын

What is the easiest way to disconnect the wire bundle that run inside the bars to the throttle side ? About to throw HD reach bars on 2018 FLDE Deluxe. Thanks to anyone who can help

@terrygates533 4 жыл бұрын

Hey john I put some 16 inch bars on my 99 road king police it got an 88 on it did away with the horn bottom an the flashlight button got everything working but no power to the starter.

@ljohnson9440 6 жыл бұрын

Klein makes a wire pulling lubricant in a spray can and hose which is perfect for this. It’s water based and dries nicely.

@gregmayo9218 6 жыл бұрын

What's the hardest part of doing this on these RKS? I want to do my own, 14 inch but the hydro clutch scares me.

@twowheeledanimal4805 6 жыл бұрын

Hey John, What's your opinion on torque cones? Do they do anything at all?

@americanbaggerraf6604 6 жыл бұрын

Hi John, I’m a new rider and I just bought a 2017 Fatboy S. I want to change the bars for something 10-12” / 1 1/2” Do you think because I’m new it my be harder to ride? Btw since I started looking for my new motorcycle I have been watching your vids. Great job

@larrylovins8252 5 жыл бұрын

just got my 2019 , 2 days ago. It's in Bonneville Salt Flat White, and I want put some T-Bars on it. Any thoughts?

@ryanmiras4283 6 жыл бұрын

Hey John, greetings from Oregon. What's your opinion on Love Jugs? My ride is a beautiful 2008 RK 103 Stage 3.

@seanmoody5735 3 жыл бұрын

John what is the diamater on the 2020 raod king special handle bars?

@bryencass8260 Жыл бұрын

Do you use some sticky on the grips after they come out to keep them tight and if so what?

@beardedbiker2647 3 жыл бұрын

Couldn’t tell from the video but would an adapter plate be required to mount drag or tbars?

@anthonynichols3678 5 жыл бұрын

Off topic.. What's the song playing between the 5 and 6 minute mark (love it)? Thanks?

@ttomsic 2 жыл бұрын

Question. I took my bars off to powder coat. When putting the throttle by wire back, I see it has 2 plugs. The plug that has the 2 wires black and white. Where does it plug into?

@CEOsario 6 жыл бұрын

Thanks again great video, have you tried to lube the wires with either dielectric grease or lanolin?

@TheHarleyTech 6 жыл бұрын

I use dielectric grease when necessary. I’ve never used lanolin.

@MrJgsanchez 2 жыл бұрын

Great video!!

@wednesdaysdisaster2141 4 жыл бұрын

Hey john , I just bought a 2002 road king classic and the bars are bent so i need to change them out, however im 6'2 and it feels small to me but i dont want bars that are really high, i like the way these look on the bike you just did but i noticed you comment on how wide the are. what do you recommend ? This is my first harley but Ive been riding my whole life but motocross.

@mikem8093 Жыл бұрын

Great vid John do you know if the Road Glide Special handle bar would fit that bike? My last bike was a 15 Road glide ultra CVO and I loved the riding position. Your right the stock bars totally suck

@candostyle 5 жыл бұрын

Will the risers add 2" to my new ape bars ?

@joshuazagala418 5 жыл бұрын

John what's the part number/name of the wire extension that you used? Is it a Harley part? Do you have to cut and solder or does it extend from plug to plug?

@Doul3le_T 2 жыл бұрын

Any tips on depinning those connectors?

@josephscott2267 6 жыл бұрын

Good video John! Had a similar pain in my ass when I swapped the bars on my FXDB still waiting for my bad boy video. Yeah I had to mention it hahah

@TheHarleyTech 6 жыл бұрын

I hear ya! I really need to ride my own bike for a change, huh?

@gilstrapappraisal 6 жыл бұрын

Moving my ‘14 Road King handlebars tomorrow-16” apes are scraping the windshield when it’s on...don’t suppose you know the torque spec for the riser bolts?

@jhwk1970 5 жыл бұрын

I was new bike shopping in 2017 and the Road King seemed like it fit the bill. I sat on one and hated the handlebars and seat so much the RK got scratched off my “maybe” list. The idea I would spend all that money for a bike that was unbearable while still in the showroom was simply not going to happen. What is/was HD thinking? Suddenly the far more comfortable Road Glide made sense.....sorta.

@BavarianMotorHead 4 жыл бұрын

Have you ever installed a 39" Burly Longhorn Beach Bar? Can't find a Cable Kit anywhere. And have no clue how much over stock in Extensions I need for all cables. Any help? Thanks for your time.

@ednunya8578 6 жыл бұрын

John, I need to find out where th at guy got the freight train headlight ring for the 2018 Road King Special. I have the same bike, and would really like that trim ring too.

@TheHarleyTech 6 жыл бұрын

It’s a Harley part.