How To Do A Transmission/Clutch Job on Cummins ISX15, Part 2

How To Do A Transmission/Clutch Job on Cummins ISX15, Part 2 - Transmission and Clutch Removal

Рет қаралды 47,110

2 жыл бұрын

Welcome! We are showing you how to do a transimission/clutch job for T660 Kenworth, Cummins ISX15 step by step. This is the part 2 - transmission and clutch removal, and rear main seal removal and reinstallation.
Playlist Recommendation: Truck Maintenance - Drive Line
► bit.ly/3HPD7cr
📢Exciting News:
Our online store is officially launched - Shop the largest collection of DPF, DOC, SCR & One Box at a price you will like!
► DPFDiscounter.com
Business Info:
Diesel Emissions Specialists offers expert diagnostics and repairs for diesel emissions aftertreatment systems. Rely on our skilled technicians for comprehensive solutions, including DPF cleaning, DOC, SCR, and One Box parts. Ensure your diesel engine runs efficiently with our top-tier services.
► www.emissionspecialists.com/
► Address: 1120 High Ave SW Canton, Ohio 44707
► Phone: 330-573-5396 (for business only)
► Email: info@fttfleet.com
Shop the largest DPF, DOC, SCR & One Box collection at a price you will like!
► dpfdiscounter.com/
Get the most advanced electric APU power by Lithium Starting Batteries for $5,500 today!
► www.polarfoxapu.com/
Connect with us on Social Media Platforms:
► KZfaq: bit.ly/35YO3kN
► Instagram: bit.ly/3C7hRy6
► TikTok: bit.ly/3QxGHMT
► Facebook Page: bit.ly/2QqBuZ0
► Threads: bit.ly/3KmNp6P
► Trucking Facebook Group: bit.ly/34TbQXQ
My Favorite Products for trucking & truck repair needs from Amazon:
► amzn.to/3xZkDn3
Awesome Products and Services We Recommend:
► OTR performance diagnostic tool (super easy scan tool every trucker needs) - use promo code road3333 to get $100 off: bit.ly/3O3wshT
► Rock Rooster offers the best work boots for you. Use channel-exclusive promo code road3333 to get 12% off of your order today. bit.ly/3HFLFDu
Want to work with our channel? Email us for more details
truckingandfixingwithryan@gmail.com
-----Disclaimer-----
The information and instructions provided by Trucking & Fixing with Ryan KZfaq channel is for general informational purposes only. All information on the channel is provided in good faith, however, we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on this channel. Some product links are affiliate links which means if you buy something we'll receive a small commission.

Пікірлер: 69

@slipdog04jumpseat37 2 жыл бұрын

Enjoy your videos, seems like a big investment to do it yourself unless you own your own shop. I learned a lot watching you !

@terrysmith7229 2 ай бұрын

Man Ryan, I really like your knowledge.

@betobsbf 2 жыл бұрын

Working smart is the name of the game

@rogercoffrey6690 2 жыл бұрын

Wow it takes a special person to work on big trucks were lucky to have you to fix thim

@fredshorty402 Ай бұрын

This guy is very good and a clear speaker

@AngelGarage 3 ай бұрын

Dude, thanks for the video. This is exactly what I was looking for

@user-ph5wt1bv8x 2 ай бұрын

I always wonder to myself, wasn't easier to use a shovel dig a little dirt and drag the transmission out, rather than making your life miserable, disassembling more truck components, just my thoughts....!!!

@nickfehrenbach382 2 жыл бұрын

That's alot of work, but you make it look easy. Thanks as always for yet another in depth, easy to follow how to truck maintenance/repair video you took the time to share with all of us wanting to know how its done

@truckingandfixing 2 жыл бұрын

Love to hear that! Thank you!

@jvjoe4376 2 жыл бұрын

Awesome content!! Looking foward to install video. Thanks for posting.

@truckingandfixing 2 жыл бұрын

The part 3 video for installation has been released. You should be able to find it in the video description! 🙏

@leongallego6564 2 ай бұрын

Thank you so much for such a good video. It is very helpful.

@apaulothegreat1581 3 ай бұрын

I like your style and your video. That's called a structural housing. I'm not trying to tell you how to do your job but, You should have ran a dial indicator around that structural housing before you installed that seal. That would tell you if it needed to be replaced that it was running out of square. Due to a lot of torque they can warp. Again in 10 years.I feel pretty certain you'll be one of the greatest mechanics of the greatest. Medicine man retired.

@moonrunnerlife1640 2 жыл бұрын

That eagle landed alright. Your a badass mechanic/driver dude. Thanks for the quality information and video.

@truckingandfixing 2 жыл бұрын

Thank you!

@seanbrown9111 2 жыл бұрын

It's just heavy work but not hard . I have replaced many heavy trk clutches. Good job and keep up the good work.

@raulayon9224 2 жыл бұрын

Great job Ryan. Stay safe.

@truckingandfixing 2 жыл бұрын

Thank you!

@MrKeithsmith943 2 жыл бұрын

Cool video.. This is my 1st time watching your videos. Now I see where you left and went on to do..from LSTR

@fabiancruz7350 Жыл бұрын

Me encantan tus videos, ya que los entiendo porque apenas estoy aprendiendo inglés. Muy buen trabajo.

@joellevesque3292 2 жыл бұрын

Make sure to free up and check all clutch linkage rods. Also a good idea to make sure the rear engine mounts are in good shape. A lot easier to do with the trans removed! Good job!

@tripplemmm86 2 жыл бұрын

Well video one explains all that but you seem to know your stuff too , I’ll take it , knowledge me up .. talk some more 😂

@socorrorivera9420 6 ай бұрын

Real good video and that it’s gonna help me Thank you✅

@davidarnold5823 11 ай бұрын

thanks for sharing good job

@davidrosenberg353 2 жыл бұрын

Supper video has GREAT content thanks Ryan that was perfect and you are the MASTER I could watch you all day long GOOD STUFF. thanks, Dave in L.A.

@truckingandfixing 2 жыл бұрын

Thank you Dave, I appreciate the nice words.

@tree9851 Жыл бұрын

Usually the rear structure will start leaking oil not long after a trans has been removed and reinstalled. Then you have to pull it ALL apart again. It's a good idea to just replace that gasket while your in there. It's a bunch more work but so is pulling a trans twice.

@10oakchase Жыл бұрын

thanks for not having a bunch of music playing in the background, thanks for explaining

@italosuarez8641 Жыл бұрын

Nice job, I 👍 liked

@tthomsen76 2 жыл бұрын

Love the video Ryan your doing a great job 👍 😉✌️💪✝️🚛🗽🦅🇺🇲

@truckingandfixing 2 жыл бұрын

Thank you Tim!

@azcactusflower1 2 жыл бұрын

Ryan, to increase traffic, you can add hashtags AFTER your long description, making a space between description and hashtags. Also perhaps add X15 to title. Great job on a big job btw :)

@truckingandfixing 2 жыл бұрын

Always love to hear your suggestions! And thank you again to point out the mono audio. We look into it and fixed it.

@winnaung1238 20 күн бұрын

Great video Ryan, after how many miles need the clutch replacement.

@tbonepatti 2 жыл бұрын

Good job Ryan. I like the way you explain as you go. Straight forward no fluff. One question. Why didn't you just run the truck up on some ramps to get it off the ground a bit. I've seen shop guy use just 2x6 stacked 3 or 3 high and staggered, Drive right up give you 6 to 8 inches clearance.

@truckingandfixing 2 жыл бұрын

Good question. Someone asked me the same question the other day! For me, a relatively thin guy, it was enough clearance for me without a ramp. Rising the truck height will make removaland installation of the transmission a more dangerous work.

@IsaacCharles-ek7xj 8 ай бұрын

Great video Ryan greetings from st Thomas UNITED STATES VIRGIN ISLANDS in the CARRIBBEAN US TERRITORY i am new to your channel and these videos are very helpful to a journeyman Rookie heavy equipment Mechanic like me my dad was a diesel technician he taught me about heavy duty trucks and earthmoving equipment repair before he passed away so i am PERSUING this dream to become a certified diesel technician and get my CDL for TRACTOR TRAILER TRAINING THANKS FOR THE STEP BY STEP INSTRUCTION I ALREADY LIKED AND SUBCRIBED THANKS AGAIN AND GOD BLESS YOU AND YOUR FAMILY

@dominicbagira2011 2 жыл бұрын

How do I get the torque specifications for the bolts 🔩 when reassembling?

@disonesto 19 күн бұрын

What model clutch caddy do you have? I cant seem to find the one that also has the flywheel plate adapter

@dapperdanp2485 Жыл бұрын

Hi Ryan where can I pick up a jack like that?

@joereiche3547 2 жыл бұрын

Dumb question ....I have seen videos where they pull the transmission and the clutch out together they rotate the engine and separate the clutch pressure plate thru the access hole ....no idea , maybe something I don't get but it seems easier???

@billbarnes9718 2 жыл бұрын

Did you use the handy dandy truck ramps you made for maximum clearance? Great video. 👍

@truckingandfixing 2 жыл бұрын

I didn’t use it for this job. Because there is enough clearance. Plus the higher the truck, the more risky when removing and install the heavy transmission.

@NoName-gb9gp 2 ай бұрын

Thanks for video. How many hours to do the job? Just wondering in case I need to give someone a price. Thanks.

@claudiaceballos4257 2 жыл бұрын

Hey Ryan question. Recently I went to turn on my truck and it doesn’t want to go into gear. Any gear , any idea where I should start looking? Solenoids? Clutch? Fly wheel? main seal? Thanks again keep it up super informative. I’m subscribed.

@truckingandfixing 2 жыл бұрын

Sorry for the long delay. Is it a automatic or manual?

@simzah274 2 жыл бұрын

Mate invest in Milwaukee impact wrenches, fart arsing around with air wrenches lol. 3/8 driver will bang those bellhousing bolts no sweet! Always remove the clutch with the box 10x easier!!!

@anuoluwaposanyaolu6110 Ай бұрын

What is the name of the machine you used to bring out the gear and how can I get one?

@Fearsomex23 28 күн бұрын

Link for input shaft seal tool?

@bernalcm 2 жыл бұрын

You need to wear a respirator bud dealing with all that clutch dust. It will give you cancer . Been a truck mechanic myself for 13 plus years you need to take care of yourself no one else will.

@user-cj4jj9mo4u 10 ай бұрын

I want to know torque of flywheel and flywheel please?

@ghayour245 2 жыл бұрын

Hey rayan what kind of catty is it. Which brand and where did you get it. I want to do my rear end and that would be a big help

@truckingandfixing 2 жыл бұрын

It is Kiene Diesel brand, bought from tool discount.com

@stewy313 Жыл бұрын

How much is a job like this? Replacing the clutch

@3PumpChumper 2 жыл бұрын

Why did you use soap and water to lube the seal? My general rule of thumb is whatever fluid I’m sealing is the lubricant I use on reassembly. This a big truck kinda thing?

@truckingandfixing 2 жыл бұрын

Your general rule is okay for other seals. But for this specific seal, Cummins specify soap and water.

@fitz-deanparker1915 2 жыл бұрын

I am trying to remove the two hoses from my semi manual gear box l remove the two plastic clips but it won't come off

@truckingandfixing 2 жыл бұрын

Sorry, I am not exactly sure what hoses and clips you are referring to. Please email me a picture, so we can help!

@user-xi1nz1qo2p 6 ай бұрын

ur dpfdp tube look kinck sometime u can have some trouble with this !

@omarh4694 10 ай бұрын

How much would a job like this cost?

@TheFoezee 2 жыл бұрын

what kind of “floor” are using? plywood, sheet metal?

@truckingandfixing 2 жыл бұрын

Sheet metal

@jasoncolon1329 Жыл бұрын

What's the name of your shop

@truckingandfixing Жыл бұрын

Fox Truck & Tractor LLC

@simzah274 2 жыл бұрын

Type of engine has nothing to do with removing a gearbox mate, it depends on the truck! Cabover, short nose or long nose.

@NoName-cy7nl 6 ай бұрын

Call the tow truck to lift the truck, or next time put wood under the front tires

@ckryegrass11 5 ай бұрын

The main people need to understand is how long it took this guy to do this job. Doing this in your front yard on the ground as he said is not the way to do this.