This guy has more stories than Walt Disney. I have 31 yrs. as an own/op large car. If you know anything about a truck with a CAT engine, it's not about HP it's about torque, which comes from low RPM's coming out of the hole. Keep mashing that fuel pedal & constantly using that Jake all the time. No need for a Jake when you bobtail, pull an empty or under 45 mph. Cheaper to replace brakes instead of always throwing that decompression on the engine and having to work on it. Guess this is what separates old school from new school.

He's turned into a You Tuber TOOL!

Turning up trucks that drivers are running is always a crapshoot.

You’re always going to explain it in a future video and you never do. It’s getting old.

Sounds like a bunch of fuckin junk equipment. I agree with the dude that said he feels safer with Tims junk off the road.

Tim,it's great seeing you back. I love your new shop. I'm praying for you and your family daily.

Damit Tim when it rains it pours but you always bounces back.

Yes sir out of Frame for ol whiskey it needs it a complete overhaul top to bottom side to side everything new Travis works his butt off with ol whiskey beautiful truck

Oh gosh are you running a trucking company or a MASH unit for semi tractor… yikes. Keep on Truckin’ and yes I’m that old and I still love Trucks !!!

Your certainly very busy with moving and work....great to see....Hope everything goes good for you Tim and family....your worth it...Stay safe

what happens when you beat the snot out of your equipment and crank up the computers

Hey Tim its great to see Bryce back with you as he has been scarce

Your business has really grown I'm happy for ya

Make sure them trucks are up to standards, when trying to get into the tankers business. You will loose contracts a Hella a lot faster. Blessings to you Tim.

Fun fact, my dad was Joe Bentleys first driver when he left EDS. So I was in the actual truck that worked to build that whole shop and business a good part of my childhood. Dad ran Oregon for him weekly for like a decade.

I have to Say Tim You are one cool Dad.

That was a awesome video it is nice to see 🐓 running good he is looking awesome hope you all have a blessed night god bless and it is nice to see you guys back 👍🙏❤️💯

Tim don't be ashamed to loving your truck I love trucks myself and also you did an awesome tarp job but that's really good

Man I hate to see so many trucks and trailers are down. Engines rebuilds are a money pit in today’s world a lot of the issue is getting parts. Thank you for the great videos. God bless you and your family. Safe travels!

❤the new truck yard tim gentry keep up the good work more room for the boat hoist now

Nice way to start my work week with a new video from yup folks

Hey Tim! I have a suggestion! Why don’t you finish up the Air Force cabover, get it insured and put it to work! It has a working engine and everything!

10r8501 is the part number for stock cat injectors lol. So no you’re not flowing big fuel like you’re saying you are. Pulse width gonna be stretched way too much for having the 1000hp that you claim. The new part number for “59s” is 211-3027 the reman number is 10r0959. You’re flowing 2.8 kgs, the 59s flow 4.7.

My C-16 ate turbo gaskets. I don't miss the constant repairs on that truck.

Great to see Bryce.

You know the best thing of this video was no promising stuff you cant keep your word that was a good video and knock off the talking about haters and people who have acdifferent Opinion about things they dont like because the more you say something the more there feeding on it keep up the great videos 🎉

Awesome video thanks for sharing

👍👍👍✝️✝️✝️🇺🇸🇺🇸🇺🇸😎great video good to see you back on track.

Love watching reason I got my CDLs ended up having my truck turn over so as bad as I love trucking I don’t think I’ll be able to get another one keep going and stay safe out there

Brax is going to be a great mechanic what a fine young man ❤

nice place, really cool, you are like a phoenix men, is nice to see this, shop look amazing. 👏👏

You and Steve need to release a video on a certain day at a certain time, weekly. Period. You want new subs, original subs to stay loyal, watch and comment... then commit. Might be harsh and a hard pill to swallow, but that's the way to greatness. This random day release shit is not the way to keep a channel afloat. Keep some B-Roll for those off times like vacation or what have you. Just simply be punctual, weekly.

Glad roosters back in action brother yall take care be safe 🙏 prayers for lil holly 🙏

Brax working in the shop with you will be a lifetime of memories and he’s learning a valuable skill. My Dad had me in the shop at his age and I am forever thankful what he taught me about doing mechanical work and driving trucks. Keep up the good work. How’s Holy girl?🙏

The S in Illinois is.silent....

Been watching for awhile now enjoy your content Rooster a beast

I feel much safer on the road now that most o Tim's junk is parked.

Regular #Maintenance is Key to running a successful #TruckingBusiness, do not ignore this, it will put you #OutOfBusiness! A trucking business also requires Experience #DieselMechanics too. When all your problems start dropping such as #FleetTrucks and trailers all of a sudden #Breakdown at once, this tells me #MaintenanceIsLacking in your business 🧑‍💼. Something needs to change to be a successful business. 👨‍💼

Tim you know that you can not have good old Rooster 🐓 out it’s the leader of the pack. Now it’s time for a fresh wash job.

6 days ago & no new video

When it comes to tarping and tarps don’t go cheap. Have plenty of bungees. Y’all got this.

Holly you got a new friend Someone keep you company while you riding in a big truck

Brother, thems ain’t no 59s. Them 57s which are a stock injector.

That Tim was a good all over video , keep it old school, and how dare people question what braxton can or can't do . He's learning hands on ,there's a lot of men out there that can't do shit lazy useless humans. And got to say Bryce will be missed. Hes a strong right hand man to have on the Gentry crew

Howdy good evning yall

keep turning them up

I have seen many cracked paccar mx-13 heads and they all crack for the exact same reason. Whoever is tuning those paccar engines does not know what they are doing. From the inception of diesel emissions the main focus has been reducing NOx emissions and NOx creation occurs when fuel is burned at high temperatures so manufacturers introduced egr system to lower combustion temperatures by introducing inert gas into the cylinder which lowers combustion chamber temperatures. You can't just eliminate the egr and expect the engine to run properly without completely retuning the engine to change the way it operates. Incorrect tuning is what causes the paccar MX-13 heads to repeatedly crack. The engine manufacturer tuned the engine with the expectation that the egr gases are going to be there to limit combustion chamber temperatures and that is why the heads are cracking. When the first emissions requirements came out engine manufacturers adapted emission equipment into preexisting engine designs but that is not the case anymore since engines are designed around emissions systems now. To properly tune any engine one must properly understand the combustion process and how an engine operates. You will continue to have cracked paccar heads.

Another nice video and god bless

Having brax working at the shop is awesome great job brax. I can’t wait see him take over and to hell with all them haters

Tim what did ya do to my truck now? Poor old rooster! Prayin fir rooster and Bonnie and whiskey as well as my favorite you tuber and his family

Another puppy.... Tim you definitely were a bad bad boy😂😂

Thats truckin. If it aint one thing its another

Hi Tim 👋 👋 cheers

Hey Tim how are you doing today my love so how is Brax doing today and how is holly the dog and I love watching your KZfaq videos they are very educational videos

Hi Tim I like to see Brax working in the shop getting that experience that's cool

Hi Tim all the way from Yorkshire England when i started driving trucks way back in 1980 it was all rope and sheeting we had straps then it was all fancy rope notts it would take a hour or so it cover a 40 feet trailer love your content keep it coming you need to turn the boost down a bit loads of powers good but too much makes it unreliable

Like wayne o on ol two stroker says let's take her for a rip, rooster sounds him self again 💪💯

On tarping just look at Maverick or TMC Trailers and see the way they bungie the tarps. Nothing more impressive than a tarp job done right.

Good evening Tim! I truly love the relationship you and Braxton have. He This is the very best time you can spend with him he will always remember!

No we are getting out of the boat business WTF. Didn’t Tim say he was gunna start hammering hauling boats a few videos ago. Man I love the trucking and family content but stick one thing out man and see it through. Constantly moving or changing directions we can’t even keep up. But keep the content coming

why the new shop? How about a video on the new shop

Are you gonna take Bruce Wilson up on calling out rooster to the dyno test to check the actual H.P. ?Another Q, did y'all lose the boat contract or did bidenomics kill the industry?

Vehicles talk to each other and plan to break almost in unison, I'm convinced of that Tim, happens to me all the time, they talk at night while we sleep.

I would Defiantly Buy a Conestoga Screw all that Tarping.

10R-8501 is the Cat Reman number for a 57 injector

hey not bad goood job

Lol poor lil holly she cant stand chip around specially brax holding and loving on the new puppy but she is so cute she your new truck pup

Sure good to see your dad again 44:58

What’s up brother keep up the good work brother

Need a new video every other day like most KZfaqrs do.

10R 8501 are 57s small injector

Tim after this hot as hell summer we’re having which I think is wonderful weather honestly, I believe the boat sales are going to skyrocket with it being election year or not and you better hang on to some of those boat trailers honestly because I think you’re going to get busy for quite a while

The company tow trucks are flat out dragging all the dead shitbox trucks back for repair. At least those trucks are paying for themselves.

Where’s the wife and baby Tim ?

The Braxanator aint no poser he probably knows more than a lot of new mechanics coming into the business and he’s young and probably puts a lot of them to shame!!!! And that’s the facts!!!

I remember you posted on Facebook that you got that manifold from Momentum Worx

Flames 🔥 ⚡ not smoke

Sounds like someone knows something!!!

It’s a good idea to stop turning up these trucks, just a turning down smoke ,would give them a ton more power, thanks BigAl California.

So fun

I'm so glad to see you back. Your channel is one of my best channels on KZfaq. I love to watch

The best way to remove those broken bolts is with an edm machine. You can buy studs where each end is a different size so you can oversize the manifold holes and keep the turbo the stock size.

Maybe it’s time to get some newer equipment. Been doing this for 40 years and I love my older stuff, but just like us these older trucks get tired.

If you think brax gives a dang what they say you wrong! That’s my guy for real stay like that do not worry bout them little ppl!!

4th of July Fireworks 😏

🔥💪

For the loads you are doing with Bonnie a Conestoga or as we call them in Australia a curtainsider would probably be worth it as long as there are not to many overwidth loads.

Hello I'm brad in Winnipeg canada,I love your stream,the relationship with your son is awesome,plus brax is a good kid,,love the stream,you would love my truck ,,don't know how to get pic to you,hope I hear from ya

Tim you need an auto yard dog to move trailers around easier

I thought Steve was getting the rhino lined classic did he quit and I thought Bryce was moving back to his home state?

Hey would help fix this up in the future soon lol? 1979 flc with 400bc 13 speed triaxle dump tryck

Kool

Hi tim

A trucking company with few running trucks.

Brax is an amazing young man. Can drive and back those trucks and work on them. At his age, that's amazing !! If he was to lean gasoline engines also, he would be able to work anywhere he wanted !! He's amazing !!

You guys gotta stop turning those trucks up cause they blow up😂

its deffenately some sort of a vehicle on there under the tarp if i had to guess its a monster truck converted for transport still cool none the less congrats keep the wheels on the road and keep them rollin brother

How's the family doing brother the Mrs and the babies

Tim, there is a guy in Oxford Mississippi that will rebuild injectors for 100.

Hey 👋👋 Tim Bruce Wilson has a really nice mack semi if you are looking for another truck get ahold of Bruce and ask him about the mack it's a good looking truck 740000 plus miles on it and it has a little motor to run the AC and the heat