Fix Common Problems with Vertical Blinds

Рет қаралды 72,313

Күн бұрын

Link for Gear pieces:
amzn.to/404o6Nb
Link for replacement slats:
amzn.to/3H8h0Pd
Link for a full set of vertical blinds:
amzn.to/3DfQ8eR
Slat repair kit (fixes slats that have the hole broken out)
amzn.to/3XTMJLn
Here is a way we have found to easily fix common issues with vertical blinds. We use these in our apartment homes and they are a great inexpensive way to block out light and provide privacy. They do, however, have a few issues that come up and here are some quick and easy fixes to help make these home repairs.
In this video Vertical blinds are very common and if you have ever had them, then you have probably seen some of these issues before. I show you how to fix several common problems with vertical blinds. We fix issues with vertical blinds that aren't aligned, Vertical blinds that don't spin, and how to replace slats.
one blind doesn't turn.
blinds don't open.
How to fix a Vertical Blind or Veri Shade that is not rotating
This description contains affiliate links. affiliate links help keep this channel running at no cost to you. So please use the links to find the proper supplies and tools to do the job right. Thank you for supporting our channel.
00:00 Introduction
00:15 Fix a slat that is out of alignment
01:14 vertical blind slat doesn't turn
04:41 how to replace a vertical blind slat

Пікірлер: 81

@Nefertitidancer 9 күн бұрын

Wow! Such simple fix for such frustrating things. Thank you!

@RoscoReviews 9 күн бұрын

Happy to help :)

@elinden1216 23 күн бұрын

Thanks very much! Got it done! Much easier than I thought.

@RoscoReviews 23 күн бұрын

Awesome! Love hearing the success stories!

@steverobbins4872 5 ай бұрын

Very helpful. Thanks.

@RoscoReviews 5 ай бұрын

You’re welcome! Happy to help :)

@toughguy8228 9 ай бұрын

Thanks! This is perfect

@RoscoReviews 9 ай бұрын

You’re welcome. Happy to help :)

@Mrv1960 5 ай бұрын

Thanks I 3d printed the Gear with my printer and works 100%

@RoscoReviews 5 ай бұрын

Awesome! I’ve never 3d printed anything. But it has to be pretty satisfying to make your own parts!

@Mrv1960 5 ай бұрын

@@RoscoReviews I found the file on the internet and was designed by someone, all I did was send it to the printer.

@sherylalto 5 ай бұрын

This is so useful

@RoscoReviews 5 ай бұрын

Thank you! Happy to help :)

@guillemiami 10 ай бұрын

Thanks man, you solved my problem.

@RoscoReviews 10 ай бұрын

You’re welcome. Glad I could help!

@sylviamuston5412 11 ай бұрын

Thank you, fixed my issue.

@RoscoReviews 11 ай бұрын

Awesome! Glad I could help :)

@lourdesmeza7389 4 ай бұрын

Hi thank you for helping me fix it🎉🎉🎉

@RoscoReviews 4 ай бұрын

Happy to help! Love hearing the success stories 🤗

@bklynny64 8 күн бұрын

What are the chains that can be connected to it so wind won’t break?

@RoscoReviews 7 күн бұрын

I’m sorry. I’m not sure what chains you are referring to. 🤔

@truly3743 Ай бұрын

Gosh I wish I could find a video to show how to fix a broken clip by pulling it out and replacing a new one without taking my whole vertical blind bar down!! But great how to anyway…

@RoscoReviews Ай бұрын

If you are looking to replace one of the little cars that slides back and forth. I think it’s easier to take it down. If it’s just the clip I think I did show that in the video. But it was for showing how to put the little gear piece inside.

@panchofrancisco9252 10 ай бұрын

Such a simple fixing. I thought I was going to have to replace the blind. Thank you so much!🎉🎉🎉

@RoscoReviews 10 ай бұрын

You are so welcome! Glad it was an easy fix :)

@andyfreeland1018 5 ай бұрын

When i close my blinds, the last slat hits the rod that you spin to close it. Since the rod is in the way, the last slat is crooked and leaves a gap. How do i fix that?

@RoscoReviews 5 ай бұрын

The slats have a slight curve to them. It’s possible that if you flip them all around the other way it would close tighter. But, without looking at it, I’m guessing. It may just be a design flaw in the model that you have.

@user-gp1fv9uz5q 3 ай бұрын

Thank you for this great video. I have these same problems, but I have levolor verticals. Do you have any suggestions for levolor verticals?

@RoscoReviews 3 ай бұрын

It’s hard to get specific on brands and models without being able to look at it myself. The fixes in this video may work for yours as well. This is a very common style.

@whatsthat9408 Ай бұрын

I have Levolor shades and I found that for the first issue, you can’t just turn it. You have to turn the shades so the broken shade is closed, remove the shade, push up on the clip that holds the shade, and that allows you to change the direction. There’s a small rectangular hole on the piece that holds the clip and gears. Close the rest of the shades, use a pliers to pull the misaligned clip back down, reinstall shade.

@tinamckeage6665 Ай бұрын

Thanks

@RoscoReviews Ай бұрын

Happy to help :)

@gemloverallday6389 6 ай бұрын

Do you have any videos on how to replace the blind hook up into the rack. Mine have a broken clip and the clip won't hold the blinds in.

@RoscoReviews 6 ай бұрын

This video shows removing and putting back in one of the clips that holds the slat in. If you are referring to the mounting bracket that holds the whole thing up, I don't have one for that, but i will need to shoot an instal video for these next time the opportunity arises.

@Bestcustomscreens 9 ай бұрын

The vertical blind that you are repairing is a 8 prong steel head rail low cost stock type vertical blind. I totally recommend using the 4 prong self aligning head rail so that way you won't run into as many problems with this type of headrail. Please let me know if there is anything else I can do to help.

@RoscoReviews 9 ай бұрын

Oh yes. There are definitely more high end products. These are the super common ones (because they are inexpensive). These have been in almost every rental property and apartment community that I have done maintenance for.

@tiffany8222 4 ай бұрын

@@RoscoReviews that would be my place! 😂 That's why it's so awesome you're sharing how to do fixes. Some landlords don't want to fix anything, so they don't. 😢

@tiffany8222 4 ай бұрын

What do you recommend for a repair to put a slat back up that tore? Thanks!

@RoscoReviews 4 ай бұрын

They make little repair tabs that are like a sticker that you put around where the hole is. But, what I’ve done in a pinch is, straighten a paper clip and lay it across where the top of the hole should be. Then use clear tape to hold it in place. Then, I would stick that slat in the last place so you don’t notice it so much.

@bellacucina3209 11 ай бұрын

I'm missing your "myriad" of of vertical blind issues fixers? This isn't my problem. I need to repair the broken hole onto which the clasp clicks onto? Can you help with this?

@RoscoReviews 11 ай бұрын

The individual cars that hold the slats can be replaced, but you have to take the whole thing down and disassemble it. Unfortunately, I don’t have a video up for that. But when I have one brake I’ll have to make one.

@violaaube4241 Ай бұрын

You mentioned that you would give information about each part and where to purchase them. Could you please tell me?

@RoscoReviews Ай бұрын

Sure! The links are in the description of the video. But I’ll copy them down here. Link for Gear pieces: amzn.to/404o6Nb Link for replacement slats: amzn.to/3H8h0Pd Link for a full set of vertical blinds: amzn.to/3DfQ8eR

@Om-gg5tk 8 ай бұрын

Thanks for the video! I have a quick question- In my case, I am having those vertical slat blinds and I have 2 issues and would greatly appreciate your response! (1) In my living room window blinds, only 1 out of the total 9 blinds move when I pull the rope attachment. The remaining 8 blinds just stop moving along with the first one after 2 seconds of pulling my rope attachment so there is this huge gap created when I close the blind and sunlight comes right in.What to do about it? (2) For my bedroom window blinds, i ma having the same issue but in this case 4 out of 9 blinds move after pulling the rope attachment. The remaining 5 just won’t move at all after a while so it creates a wide gap and sunlight comes right in. How to solve this issue? Thanks ahead of time for your response🙏

@RoscoReviews 8 ай бұрын

It sounds like one or more of the gears may be stripped. It’s tough for me to say exactly without looking at it. I primarily use the ones that have the stick on the moving end, rather than the string on the fixed end. So I’m not as familiar with those.

@lucasarri7639 5 ай бұрын

Hello from Argentina.

@lucasarri7639 5 ай бұрын

Could a 2 meter long curtain be cut in the middle and the L-shaped track put in for a corner window? And what works?

@RoscoReviews 5 ай бұрын

Hello! I would say no. It’s possible someone could figure out a way to do that, but it would take a lot of work. The rod that runs down the center spins to turn the slats. I think you would have to get 2 small sets and mount one on each side.

@staberdearth3130 10 ай бұрын

I have a client’s vertical blind that in the process of moving it on the brackets to make room for work on the far end, one or both end caps were broken, some plastic component shards where found on the floor. Short of buying the client a new vertical blind, I’ve tried locating the end cap assemblies that hold the rod so that the blinds can rotate. Ideas on where these can be purchased? I see every other vertical blind replacement part but these!

@RoscoReviews 10 ай бұрын

Honestly, I would probably replace the whole thing. Different brands use different end pieces so you would have to find the right ones and that could be tricky. I would keep the slats and some other parts to have extras and replace the whole thing.

@staberdearth3130 10 ай бұрын

@@RoscoReviews That’s what I figured given that I could find no replacement end caps which are quite easy to take off and put on. I am trying to fix a clients blinds and minimize outlay. Guess it’ll be maximize outlay. 😉

@staberdearth3130 10 ай бұрын

@@RoscoReviews Fixed it myself, works great, client approved.

@gottadomor7438 4 ай бұрын

Helpful; t/y.

@RoscoReviews 4 ай бұрын

Happy to help :)

@myaccountname432 6 ай бұрын

I can't find the headrail replacement. I have the same brackets as you have. The wand broke off and the clips next to it wont move.

@RoscoReviews 6 ай бұрын

If you have the same ones as these, and have an issue with the mechanism that turns the center rod. You may be better off replacing the whole unit. The parts may end up costing half the price of a whole new set.

@mariannemilander 11 ай бұрын

I'm having an issue where pulling the blinds all the way out across the window (as well as then later pushing them back to one side of the window) is very difficult, and they get pretty stuck. Any suggestions?

@RoscoReviews 11 ай бұрын

This can be caused by a couple of things. The individual cars slide along the outer part of the track as well as the center spindle. If the outer shell has a portion that is a little too wide, they can fall down a little and that gets them kid of wedged in there. So I would check that first. If as they slide they start to come out the bottom a little you may need to pinch the outer shell together a little. The opposite could also be true. If the shell is a little too tight it can cause the cars to drag. Another option could be lubricating the center spindle. A little WD-40 will help the cars slide along the center.

@mariannemilander 11 ай бұрын

@@RoscoReviews Ok great, I'll try those different fixes. Thanks!

@paigechambers6555 Жыл бұрын

Can I ask are your blinds all on one bar/ bracket or two? If two then could I get some help please

@RoscoReviews Жыл бұрын

I use 2 sets of 72” blinds butted together in the middle. The ones that I have seen that are the single set closing in the middle are the pull string style.

@katotornado4312 6 ай бұрын

My friend has two turned slats I tried to turn them like in your first example but it doesn’t budge and feels like it will break if I apply to much pressure

@RoscoReviews 6 ай бұрын

Sometimes they are really hard to click over. You could remove the clip and put it back in. Just be careful not to lose the little gear piece that is inside.

@katotornado4312 6 ай бұрын

@@RoscoReviews okay I’ll try that thank you

@OG.551.98 11 ай бұрын

When I pull the string all the blinds don't move to one side. Any ideas? thx

@RoscoReviews 11 ай бұрын

I usually only deal with the ones with the sticks. The ones with the strings can be a bit finicky. The string has probably come loose somewhere. But it’s thought to say without looking at it.

@MyCamael 11 ай бұрын

What if none of them turn? I have my blind wide open ! I can't close them any ideas?

@RoscoReviews 11 ай бұрын

This is probably an issue with the little car that the twisting stick attaches to. Unfortunately, to replace that, you usually have to take the blinds down and remove the end.

@MyCamael 11 ай бұрын

@@RoscoReviews thank you 😮‍💨

@danielbaez6563 19 күн бұрын

I install new one but I hear cranking noise but no ine open why please help me

@RoscoReviews 18 күн бұрын

I’m sorry, It’s really tough to say without looking at it. It sounds like there is probably a gear that isn’t lined up right.

@JoeStilloNeverMind 6 ай бұрын

Mine does not have a way to unsnap going sideways. It goes straight up. It has to be accessed from above. You have to take the whole thing down

@RoscoReviews 6 ай бұрын

There are a lot of different models. the ones in the video are the really common, inexpensive ones that you typically see in rental units. You may have a fancier version.

@JEscobarXO Жыл бұрын

My whole carrier cracked, help

@RoscoReviews Жыл бұрын

All of the pieces are replaceable… however, at some point you are better off just replacing the whole thing. Especially if it’s the whole hosing that is bent or broken.

@Bobbie223 2 ай бұрын

Nope can’t get it out

@RoscoReviews 2 ай бұрын

They can be a little tricky sometimes.

@4af 5 ай бұрын

No KZfaqs show HOW TO LUBRICATE vertical blindsto prevent problems to begin with.

@RoscoReviews 5 ай бұрын

I suppose that gives me an idea for a future video. Lol

@RoscoReviews 5 ай бұрын

But usually if you spray a little WD40 on the aluminum rod that runs down the center then it slides a lot better.

@tiffany8222 4 ай бұрын

@@RoscoReviews great idea on spraying the rod to ease it gliding open, I've been wondering about that, thanks! Just watched this video and really appreciate you teaching this trick to others on how to turn the gear to fix their blinds! Very helpful! I've had it happen a few times in my apartment 😳 and freaked out! Here I thought *I'd* discovered that fix by accident. 😂 What a relief when it worked! I have a slat that came out because the slot tore and then the slat fell out. I need to replace the slat.. 😢 Can I buy them individually easily? Thanks again, subscribed!! 😊