Round Hand Guards? Here Are a Few Ways to Put a Light on Your Rifle!

Рет қаралды 27,515

Күн бұрын

In this informative video, Reid Henrichs of Valor Ridge discusses rifles with round hand guards and how to put a light on them. #secondamendment #firearmtraining #firearmstraining #firearmsinstructor #patriots #foundingfathers
Get trained HERE: www.valorridge.com/
Subscribe to this channel HERE: bit.ly/2O5uX8y
Follow Reid on social media HERE: bit.ly/3n12U8j
Get Pistolcraft book HERE: amzn.to/2TU9nlv
Get The American Rifleman book HERE: amzn.to/2SnYRVJ
Get The Well-Regulated book HERE: amzn.to/3kuhGY0
Get Valor Ridge Training Targets HERE: shop.actiontarget.com/content...
Support my work via donation HERE: bit.ly/3ku1CRG
Get Rail Sections HERE: amzn.to/3QE4M6s
Get Surefire G2X Light HERE: amzn.to/3QFNbuZ
Get Magpul Light Mount HERE: amzn.to/3UEI3IF
Get Wipeout Bore Cleaner HERE: amzn.to/3UU6AuI
DISCLAIMER: The materials available through this channel, Reid Henrichs, or Valor Ridge(including any show, episode, guest appearance, etc. appearing within) are for informational and entertainment purposes only.
The opinions expressed through this video are the opinions of the individual author.
FAIR USE: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with the intention of driving commentary and allowing freedom of speech.
IMPORTANT: All shooting is done on state-approved firing ranges by trained professionals. Our videos are produced in a safe environment by highly trained professionals with decades of experience. These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. Do not attempt to replicate the actions featured in our videos without the proper training, licensing, and medical professionals present.
We are not attempting to sell you the items featured in this video. We are not instructing our viewers on how to modify firearms, accessories, or otherwise change their basic legal function. All firearms and accessories are legal products commonly available in stores all across the United States. Our videos are for entertainment purposes only. We are not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms.

Пікірлер: 228

@ReidHenrichs 2 ай бұрын

If you are considering supporting the channel, join my Patreon HERE: www.patreon.com/reidhenrichs

@fearrogue 2 ай бұрын

I wish I knew about this earlier I wrapped the damn thing in half a roll of black electrical tape 😂

@oliverlamie3449 2 ай бұрын

FAB defense makes one that mounts to the bayonet lug. Maybe not the best for long strings of fire, and a little odd of a position, but it's an option.

@danm7876 2 ай бұрын

Midwest Industries has a front sight rail that clamshells on and is rock solid. running it for years, gets the light a little farther forward and no shift in zero. 33$ on some sites google the model number MCTAR-01G2

@GunsGadgets 2 ай бұрын

🔥

@johnwurfel2862 2 ай бұрын

You are an American Hero Reid!

@JulietBravo90 2 ай бұрын

I'm very happy to see the increased content lately, and have it be so useful as well

@hk45c62 2 ай бұрын

The Magpul light mount is a great addition to a rifle or shotgun.

@xXSpaceMexicanXx 2 ай бұрын

The Magpul handguards are a really solid choice as well for those looking to replace the rounded handguards but not go nuts on it. I bought a set for my 20' and they're really sturdy

@n4su5 2 ай бұрын

IWC sadly isn't viable at the moment as the owner passed away and they aren't selling anything on their site.

@09MTH 2 ай бұрын

That was my top choice…kept waiting to get one and waited too long. Hoping someone buys the patent or another company makes one.

@thomasrouh2258 2 ай бұрын

Yep.....RIP......Most of their products were good quality.....I've had 2 of IWC mounts snap right off my rail at the same place....Tried contacting them and found out about the owner passing......I found a company in PA. Shaffer Machining. They make some of the best light mounts, red dot mounts, etc. on the market in my opinion.....Arisaka is another great company for all sorts of mounting options.....

@gordo608 2 ай бұрын

I was just going to comment that too. I hope they get the business back up and running again, they made such good products for so long.

@PsychedelicWinter110 2 ай бұрын

I wish I had bought more of those. Great light mount. All their products were excellent

@thomasrouh2258 2 ай бұрын

@@PsychedelicWinter110 They were an excellent design....yes......I'll have to disagree on quality of the aluminum they used......Maybe I just got a bad couple of thorn tail light mounts for my AK.....I had 2 of them snap at the threads in the same spot.....They were able to replace the first and when the 2nd snapped that's when I found out about the owner passing......I do want to say they sent me a new thorn tail for free.....When 2 break on me I'll stop using that product until QC does it's job......RIP to the owner I'm sure he would have done the QC check..!!!!!!!

@johnwurfel2862 2 ай бұрын

My first light was a 500 lumen harbor freight light for $7 that i zip-tied to cutout in the cheese grater handguard. I have better now but i still have it and it can compete with $100 setups.

@johnbaker4847 2 ай бұрын

And easier to field fix/replace. This is how production models are developed. 👍🤔🥰

@vittoriovuocolo2438 2 ай бұрын

Man your on drugs. I've bought lots of harbor freight lights until I wised up.they are pure crap. If you have a good one you got lucky.

@deusvult6632 2 ай бұрын

My first light was a lantern that I zip tied to my musket and I was damn glad to have. It

@caiman114 2 ай бұрын

Simplicity is cool and all, but it's good to have well made stuff. It matters.

@garywatkins5533 2 ай бұрын

Again,,,,thank you so much!! Please keep up the great videos my friend

@RenoMay 2 ай бұрын

I’ve always been fond of the Front sight pic rail attachment

@HIMcules2112 2 ай бұрын

O.G. is the way to go. That's a good lookin blaster. S tier set up is the Gordon carbine clone. Big sexy 👍

@SlingshotMustang 2 ай бұрын

Am I the only one who's noticed that Reid's channel has been frozen around 200k subs for the past 4 years? I remember discovering this channel and subscribing to it some time around 2020, and I believe I remember it having 195-200k subs back then. Apparently in 4 years he's only gained another 10k subs, despite putting out a lot of good useful content. Which tells me the YT powers that be are deliberately messing with him. Other gun channels grow pretty fast and at a linear growth rate I've noticed (the ones who don't say anything the govt doesn't like). Reid's is one of the only ones that stays "stuck" at a stagnant subscriber count. Probably because he's one of the real ones and thus has been shadow-banned or hamstrung in some way I'm guessing. My favorite gun youtuber on the platform, I would've thought he'd be at 500k+ subs by now. I suspect some kind of limitation is going on in the background, as it does for other youtubers whose content the govt doesn't like.

@TerminalM193 2 ай бұрын

I've been unsubscribed from the channel twice now....

@alexhakanson1516 10 күн бұрын

I was watching some other videos trying to figure it out, thanks for making this!

@TheTld007 2 ай бұрын

Great info like always!!

@stretchman490 2 ай бұрын

Midway has a pic rail that mounts to the FSP. Not too expensive. A viable option, although not as good as the IWC part. Absolutely agree that keeping it simple and basic, and working on skills is the most important thing. If someone absolutely has to customize their rifle, in order to make it 'theirs', then there's a huge market of drop in parts that will satisfy most people, and not deviate from what Reid is holding in his hands in the video. Engineers designed the rifles this way for reasons. Most come stock looking exactly like what he's showing in the videos. But cool guy parts can be had for little money, and don't require a whole lot to install them if you absolutely need to have something else.

@timryan4711 2 ай бұрын

I had a bayonet mount flashlight mount that worked pretty good and it was cheap. Centered the light under the barrel which kept it out of my field of vision. Great video as always.

@jeffbarber240 2 ай бұрын

Yep. I have one too. Like it a lot

@JTTV72 Ай бұрын

I purchased an Elzetta FSB light mount probably close to 15 years ago. It mounts in minutes and is extremely durable. I’ve ran it on my bushmaster xm15 A2 carbine.

@neo8378 2 ай бұрын

LOVE all the content coming out recently! Keep it coming Reid! Thank you for all you do

@Fabyfakid 2 ай бұрын

I really want to schedule some training with you in the next few months. Thank you for all the useful info throughout the years.

@toprun95 2 ай бұрын

Thanks for all the good info!!

@pinhigh1 2 ай бұрын

Great info. Thank you!

@mrtlsimon 2 ай бұрын

FAB Defense makes a polymer picatinny rail for the AR handguard also, $15. I've used mine for nearly 10 years.

@thedot3814 2 ай бұрын

Your the best. Thanks for the vids. They mean alot to me.

@joelatkinson2080 2 ай бұрын

God bless you Reid!!! Another great video!!!

@ds5503 2 ай бұрын

Thanks so much for answering my question!

@irafowlerjr.7492 2 ай бұрын

Very helpful. Thanks

@markyoung2981 2 ай бұрын

Subscription added, thank you for your time and effort posting this content.

@johnmorganjr769 2 ай бұрын

Thank you Reid !! 🇺🇸 👍

@Adarondak_Transplant 2 ай бұрын

Thank you, sir.

@hhenryf.8 2 ай бұрын

Smart!! Bless you!!

@johnparker9139 2 ай бұрын

Good information! Thank you

@MrToad-actual 2 ай бұрын

Thank you, Reid.

@bradterry6101 2 ай бұрын

Thank you so much so this info…I just like the looks of the old school stuff! Thanx Brother! GOD bless!

@robertnelson1098 2 ай бұрын

Thank YOU... For helping me with my projects and information for us your viewers.......

@jggrimm 2 ай бұрын

Appreciate you, Reid.

@tomkatusa912 2 ай бұрын

Thanks Sir!!

@JohnDoe-mt8rf 2 ай бұрын

I do like the 20" PSA hand guards

@Ok-551 Ай бұрын

I have a 20”, Psa, they’re a bit fat. Good,rifle though.

@gilbertcaine9227 2 ай бұрын

Great info thank you.

@ineedabeerandaliedwn 2 ай бұрын

Your channel is a breath of fresh air. Thank you for high quality knowledge transfer with effective presentation and humility!

@gregjames2746 2 ай бұрын

Thank you!!

@TheresOnlyOneWayToRock 2 ай бұрын

Thank you. 👍

@dustinewing7974 2 ай бұрын

Nice! Now we need a video for triangle handguards haha.

@Mother-Company 2 ай бұрын

My Colt 6920 is in need of a light but I have put it off because of this issue. Thanks.

@thedeathwobblechannel6539 2 ай бұрын

Key zion makes a rail piece that mounts on your bayonet lug. To mount ur light

@benjamingamache6441 2 ай бұрын

The bayonet lug should be the go to spot for light mounting of you have an A2 front sight post. It's ambidextrous, packs away in a case flat and the closer you can get the light to the end of the barrel the less muzzle shadow you'll cast.

@TheLegendOfClete 2 ай бұрын

Great content thanks!

@brudamiranda3314 2 ай бұрын

Great video Valor Ridge! 💯 Went up the mountains here in PWN Washington to train. Valor Ridge is my go to for training. Ive been trying the full size target training from Reid's last videos

@i10_shawty76 2 ай бұрын

This guys knowledge and personality is so underrated he truly doesn’t get the attention he deserves!

@NoHomo1776 2 ай бұрын

For that IWC I couldn’t find one for the “double” heat shield.

@gadsdenjim8785 2 ай бұрын

They come with a bag of hardware. Different screws and back plates. You should be able to make it work on any of those Handguards. If you can find one with one of their dealers. Their site has been close to retail orders for over a year now.

@edsweeney6843 2 ай бұрын

OUTSTANDING VIDEO. Thanks for sharing your knowledge and experience.

@danfigueroa4124 2 ай бұрын

Thank you

@RonDevito 2 ай бұрын

I already have the IWC mount on a DSA AR that I installed years ago. I love it. I had a second one on backorder for the past six months and cancelled that in favor of Reid's 1913 rail plus MagPul mount solution. Important: if you go this route, make sure you buy 15mm Long M5 T-nuts and black 1/2" flathead 10/32 machine screws as well! The T-nuts that come with the rail segments are way too small to cross the entire vent hole and engage the handguard. If you are using the quick release mount that comes with the Surefire Scout, the MagPul rings and ring base should be removed. If you decide to use the MagPul rings, the Surefire quick release mount must be removed. Either choice is valid to your personal needs and preference.

@markbenge563 2 ай бұрын

Nice video Reid and well said and showed buddy. Mark from Tennessee 👍👍🇺🇸🇺🇸

@PistonDrivenGun 2 ай бұрын

Just make my m400 with clamshells pinning the FSB again and i was thinking of this as a video. Very nice my friend.

@overthehillsandfaraway7411 2 ай бұрын

I really like the front sight block picatinny mounts, they work awesome

@november_victor9693 2 ай бұрын

When I had a round hand guard one i used an Elzetta ZFH light mount. It worked pretty good.

@ashgrove07 2 ай бұрын

Great Idea!

@reddog1171 2 ай бұрын

Thanks

@secondamendment1927 2 ай бұрын

I found that I like the "clamp onto the frontsight" rails for my light+slim plastic handguard combo, and I just velcro the pressure switch onto the handguard

@fwod1867 2 ай бұрын

Nice option you showed for the good old round handgards 👍

@blakerussell5713 2 ай бұрын

Thanks for the reminder.I totally thought I was subbed👍

@Lester.M 2 ай бұрын

Excellent content. 🇺🇸

@bryanfaulkenburg462 2 ай бұрын

Good solid information.

@CompletePandemonium 2 ай бұрын

Great recommendations. I have been using the IWC mounts for several years too. I will have to try the pic rail setup. 😁👍

@jaredquick9366 2 ай бұрын

Make sure to get rail covers. Otherwise it's like a cheese grater lol

@scottcampbell2585 Ай бұрын

I believe cloud defensive makes light mounts for stream light and sure fire and tape strips.

@lpd1snipe 2 ай бұрын

I bought my Stag model 1L as I am a southpaw many years ago. I don't have as many rounds through it like you do, but I'm glad that they do honor their guarantee about replacement parts.

@07blackdog 2 ай бұрын

I love the Magpul mount.

@klakin 2 ай бұрын

Dude, your awesome to have in the 2A community.

@bh-2198 2 ай бұрын

On a non-free-floated barrel, the shooter has more effect on barrel harmonics than anything else. There are picatinny rail-mounts for the front-sight-post that work well. If you want to shoot good groups with your rifle, brace off the front of the magazine-well without touching the fore-end on anything at all. What you brace against has a lot to do with it too, the more rigid the better; i.e. something immoveable like concrete or steel imbedded in the ground.

@thedeathwobblechannel6539 2 ай бұрын

Kley zion makes a small rail piece that mounts to with a set screw, to your bayonet lug. To mount a light.

@spudkidmandudebro 2 ай бұрын

Thank you Reid. I still remember your lecture on the different phases of government, and we are 100% at bondage. Thank you for doing the right thing no matter what!

@whowantstogetgoodido 2 ай бұрын

You're always a breath of fresh air bro. We appreciate you.

@richardturk7162 2 ай бұрын

Love the old round handguards and have mounted pic rails on them for a light or a stubby forward grip. You forgot to mention putting the heat shields back on after mounting the pic rail.

@propdoctor21564 2 ай бұрын

I have done exactly like you show for the second option.. Most of my rifles have the standard round handguard and I actually prefer the smaller diameter but I put a short piece of magpul rail at the 10 o-clock position and use a 1-in scope ring to clamp a flashlight onto that rail which puts it right in front of my left thumb. Works great and was inexpensive.

@ThatAppalachian 2 ай бұрын

KZ extended front sight mount with a TLR long gun kit. Puts the light at the 12 o’clock position right in front of the front sight. Ranger band a pressure switch to the top of the handguard. Perfect

@andrewgagner2927 2 ай бұрын

Appreciate your time. Thank you.

@Matthew-Graves 2 ай бұрын

Ergo grip mags rail section to attach to standard handguards.

@buckshot4428 2 ай бұрын

Those vent holes are there for a reason. When you start pluging them up heat retention/buildup can be an issue. Otherwise a good idea.

@dalehenry4694 2 ай бұрын

Thank you Ried for answering the very question I had ✝️⚔️✝️🔫

@patrick014 2 ай бұрын

I use a qd mount called a kerm lock. Used to have a C cell maglight mounted to it before I switched to a surfire g2x.

@afireinside33110 2 ай бұрын

It's so funny you came out with this video today, I was shooting my rifle with the full length free floating handgaurd then I shot my wife's with the traditional Magpul type 2 pc handgaurd and I was amazed at the weight difference

@TerminalM193 2 ай бұрын

I always switch out my round hand guards that use an A-pillar gasblock with a Midwest Industries mlok or an extended magpul mlok handguard.... I've pretty much switched over to low profile gas blocks anyway for longer mlok handguards to eliminate as much barrel shadow possible, especially when shooting suppressed. LWRC currently make my favorite DI & piston operated rifles.

@Patriot1792 2 ай бұрын

I religiously stick too hose clamps the cost + reliability beats any light mount I’ve found doubles as a sling mount aswell

@Sterben1031 2 ай бұрын

IWC makes a great mount. I used one for a long time, and later modified it to fit up under my custom modified PEQ2/PAQ4 barrel mount so I could use a Surefire M640 Vampire with my Vital 2 laser. No rails + pencil barrel gets me down to about 7 pounds 2 ounces with a loaded mag, and thats with a red dot, light, laser, sling and foregrip on an 11.5.

@HaroldTheSloth 2 ай бұрын

When Reid put out his last light video, I bought several Surefire G2X lights, and they were inexpensive and awesome. I also bought a couple Magpul rail mounts, and they are one of the best inexpensive mounting options available.

@theshapeexists 2 ай бұрын

I have those 4 of my shotguns and 2 of my ARs. Great lights

@therulesaredifferent8280 2 ай бұрын

Thanks Reid. Love new stuff. Love old stuff. Know what works best for you. Leave the bells and whistles behind, you really don't need them. If a product has been improved and works better for you, be open minded. But don't scoff at older stuff... its been dealing death since before you started life. Respect it. Have a basic knowledge of how to use it all, but train mostly with your setup.

@beserkerpatroit1337 2 ай бұрын

You can get Click tailcaps instead of pressure ones for the G2 and 6P models as well to eliminate the twist headache, working man's Scoutlight

@IrishPennant0311 2 ай бұрын

Ergo Grips makes a drop in rail mount that bolts to your front sight tower.

@andyprairiedog4829 2 ай бұрын

Excellent presentation and way to get some torches ready for those carbines. I sure would like to get an upper with those type of hamdguards and front sight tower. Sadly, I swayed from the Old Ways.

@cameronnorton5898 2 ай бұрын

After having all the tactical crap, I find the rifle I always grab is my classic midlength with irons and the normal round handgaurds.

@sombra6153 2 ай бұрын

After dealing with a number of tape switches that stopped working, I switched to the more simplistic light setup like you’re running. I bought a couple of those Magpuls when they first came out and used them on issue carbines with quad rails. They worked great. Still using one minus the rings on a personal with a free float quad to mount a Scout Light 600L that I wouldn’t have otherwise bought except that the price was too right. Activating the Scout with the butt cap switch. The Magpul mount pits the light at the right height and sufficiently far enough foreword to establish a good support hand position. I’d never realized the hand guards were double heat shielded. After going with free float quads, I was a bit irritated to find that the hand guard get pretty hot closer to the gas block making gloves a necessity for anything more than a few rounds. Having watched your previous video, I now wonder how much of a difference the free float really makes when trying to make small, tight groups at 100 from a supported position.

@orangecrush5512 2 ай бұрын

Liked, subscribed and you just sold some stuff for these folks.

@therichie9916 2 ай бұрын

I've mounted lights by attaching a rail section on top of these handgaurds for over ten years. Works just fine.

@videodistro 2 ай бұрын

I have the Israeli mount for a light under the front sight. Works great.

@Jimmy.O. 2 ай бұрын

These og length handguards are nice. Delta-ring to gasblock always cut it for me. Whether it's carbine, midlength, or rifle.

@PandemicGameplay 2 ай бұрын

awesome videos btw

@latigomorgan 2 ай бұрын

I have a Surefire I found in the mud in a bar ditch mounted in a front sight mount made by Elzetta. It covers the bayonet lug, but I don’t own a bayonet.

@spaides5121 2 ай бұрын

i took the plastic rail off my grip pod, a couple of screws and drilled it into the handguard

@jjtru21 2 ай бұрын

Love my stag

@DutchK75 2 ай бұрын

I have two Colt 6921's with Magpul SL handguards. I like those a lot. And mounting a light is pretty easy. If you don't want to pay a lot.

@aaronwilcox6417 2 ай бұрын

Same. The Magpul SL indeed check a lot of boxes. And your right, it's a cheap and easy way to go.

@araneaetvelivolum1086 2 ай бұрын

I opted for the traditional handguard as well. Heat was the driving factor. My choice for mounting accessories was a pic rail handguard length ( mounted at the bottom) as i wanted to be able to mount a light, same setup you showed just left side as I'm a lefty, and a bipod or vertical handle. I used Amazon products with stainless hardware from my local ACE. A little blue loctide and voila, everything works very well. I can reach the light switch, and yes on / off only is my preference too (blinking and flashing blablabla just makes me dizzy lol), when the handle is installed. Good video, thanks for sharing. If i may, can you consider publishing a presentation about shooting techniques free standing and how to accomplish best results? Thank you.👍