Round Ice! Ticent Ice Cube Tray Review

Рет қаралды 82,768

4 жыл бұрын

Reviewing the Ticent Silicon ice cube molds. The mold is for large square cubes and round cubes! I have never had round ice before...I'm excited about that one. Also, after using the cubes, I prefer the round cubes. The square cubes are great but just a little too big for the glass that I have.
Ticent Ice Cube Trays: amzn.to/3l2cIx5
Filmed on GoPro: amzn.to/2QlltEp

Пікірлер: 80

@annejones2199 Жыл бұрын

A tip for ya'll when ice cubes are ready. Run under HOT water, for about 10 seconds. Make sure you get the bottom of the tray. TWIST the trays. They will come out easily. You're welcome. =) =)

@iandoingstuff Жыл бұрын

great tip!

@twoflyfou Жыл бұрын

DUH

@wendysica632 4 жыл бұрын

So I also purchased the same ice cube molds, I find for the sphere size mold, you have to fill the bottom half first, then put the top on and press each sphere to snap in place so the water can’t escape each one, then fill rest of the way using the funnel, if it spills over it’s ok!! The ice comes out perfectly rounded 😁

@gracebenton5115 4 жыл бұрын

Wendy, you should make a video. I’ve spent way too much time trying to figure out these sphere molds and I’m still struggling!

@iandoingstuff 4 жыл бұрын

yeah! thats a great idea!

@ninalozada6705 3 жыл бұрын

Grace Benton I was ready to murder those spheres because not only was the water transferring to the other ones the water kept jumping out into the tray. It was snapping shut either so I gave up so now I’m going to have ice inside the top tray around the circles 😭

@iandoingstuff 3 жыл бұрын

Nina Lozada // I usually have water sit on top of the tray around the circles. It’s usually not much. It brakes off really easy when i open the molded.

@jackkitchen737 3 жыл бұрын

Why didn't I think of that? That's a great idea on your part. Thank you Wendy.

@joaovitorheinzen854 3 жыл бұрын

"round cubes" a.k.a. spheres

@iandoingstuff 3 жыл бұрын

haha!

@adamcervino5312 Жыл бұрын

For the spheres, use a butter k ice and chip away the rough edges and you’ll have a nice round cube. I make dozens and put them in a large ziplock bag and keep in freezer.

@1mattadams 3 жыл бұрын

I run them under warm water for a bit and push them out from the bottom.

@theartistformerlyknownasbr4849 2 жыл бұрын

A little tip for the spheres, if you "click" the silicone trays together, it keeps the water from transferring to the other molds and makes better balls...

@xero9ravity150 2 жыл бұрын

Click how exactly? I think i tried closing them up but it's still not stuck together

@theartistformerlyknownasbr4849 2 жыл бұрын

@@xero9ravity150 sometimes it works, overtimes not... I'm not sure how to describe, but the one I have had a raised lip around the ball... It seems to snap into the other half of the mold, except when it won't... It's kinda frustrating

@nikkan3810 Жыл бұрын

@@theartistformerlyknownasbr4849 It's just really hard cuz you don't see the ridge, so no way to tell if it's closed or not. i thought i pressed it pretty tight but then it just filled up in the middle anyway :D

@jackwebb437 2 жыл бұрын

I just got the same one in the mail. Made one batch. It’s a pain in the rumpus to make the ice balls.

@iso_Bandit Жыл бұрын

i just got this set plus a diamond, the issue i had was keeping the molds together, the water kept separating the mold in the round one

@tomx63 4 жыл бұрын

Ian, checking out your video because I recently received an ice ball tray as a gift. Was searching for tips and tricks on their removal. The tray bottom is hard plastic and the top is silicone. The ice balls are difficult to remove from the silicone half. They easily pop right out of the bottom. Anyway, great video, sir. I admire your taste in whiskey and glassware! Cheers!

@iandoingstuff 4 жыл бұрын

yeah, they are hard to get out. Thanks man!!

@beaulieuc8910 Жыл бұрын

Good video. THey are a lot of fun

@agirldownunder9299 Жыл бұрын

I have this spherical tray and my first try failed so I'm here to learn

@teecee2001 3 жыл бұрын

Anyone know if these are 100% silicone? Wanna try putting them in the oven to get rid of the garlic taste that they've picked up from the freezer but they'll burn if they contain anything other than silicone

@thankyouthankyou1172 3 жыл бұрын

4:08 I've got the same tray. it's quite difficult for me to put the water in. the water just runs from one ball to another or to the gap:) and it's difficult to observe if one ball is full or not because it's not transparent. glad you made nice ice ones

@iandoingstuff 3 жыл бұрын

yeah, it would be nice to have a better way of telling if the tray was full. I just stop when they are all overflowing.

@vivalabam42 2 жыл бұрын

I came here for that reason. the square mold works greate but I couldn't get the ball mold to work.

@unclegeorge7845 Жыл бұрын

The ice ball system has to be pinched together juuuussst right. That means pressing around the joint of all six balls. {edit} I just overfill them directly from my filter pitcher and let the extra water freeze. A moment under hot water when you're releasing the balls and everything works it's way out.

@jennykhandamanee8321 3 жыл бұрын

Cheers! 🥃

@anonymoususer1231 4 жыл бұрын

The round ones are such a pain to fill!! Was trying to find a video on the easy way to do it. I need that funnel.

@iandoingstuff 4 жыл бұрын

I was just talking with someone and they mentioned that they saw small funnels at Walmart. He said they were in the camping section. I did a search on walmarts web page and found small funnels.

@dkay636 3 жыл бұрын

I gave up on the spheres

@emritramharracksingh 3 жыл бұрын

Your supposed to fill the bottom mold up almost all the way (some have a mark for fill line, past the sphere mold) then press on the top mold carefully (edges first) the holes are there to let out the air, the water will be pushed into the top half and if done correctly only a little bit of water will come out the top hole. No need for a funnel Hope this helps

@saifulyanto6933 4 жыл бұрын

How did u get that funnel 3:56 ?

@iandoingstuff 4 жыл бұрын

It came with the molds!

@veeclash4157 3 жыл бұрын

Anyone else got triggered that he kept calling them Circles when they are Spheres? XD

@iandoingstuff 3 жыл бұрын

haha!!

@zachhandziak 2 жыл бұрын

Looking around for a good whisky ice mold and came across this. First thought, “oh his shirt says duck river, cool I am by a duck river,” and then, “wait he also has a Muletown hat and and Asgard growler!?" haha nice to meet a fellow Columbian!

@iandoingstuff 2 жыл бұрын

oh yeah!! we love it in Columbia!

@mike212916 2 жыл бұрын

now I know to get the single sphere molds.

@donhectorsalamanca 2 жыл бұрын

I just got these trays. So confused as to how the sphere one works idk.

@iandoingstuff 2 жыл бұрын

Hope the video helped you figure it out!

@Restrictted 3 жыл бұрын

I'm glad you didn't fill the water up too much. People don't mention that water expands when cooled.

@Aggie09AF 4 жыл бұрын

How did you get the round icecube container seal? Every time I pour it spills into the next sphere.

@iandoingstuff 4 жыл бұрын

James Lancaster mine spill over also. When I open them up I just knock off the extras. When I shut the molds I do try my best to get them really closed. Then when i fill them I’m careful about over pouring the mold. But there is usually some kind of seeping.

@lilchoppa6698 3 жыл бұрын

How long does it take to freeze

@iandoingstuff 3 жыл бұрын

I wasn’t timing the freezing but I don’t think they were in there for 24 hours. When I’m making a batch of cubes I like for them to be in the molds for 24 hours. There is nothing scientific to that....just a preference.

@mysisterfanny 3 жыл бұрын

what the hell!!! mine didn't come with a funnel!

@rbnhd1976 2 жыл бұрын

After pulling from mold, rinse quick till smooth them put in freezer again for a few minutes

@rbnhd1976 2 жыл бұрын

Nvm you said that

@iandoingstuff 2 жыл бұрын

thats a great idea

@Milly-tm8gb Жыл бұрын

🤝cool

@alexis24844 3 жыл бұрын

Next time you take out the trays wait 2mins then take the cubes or circle out

@AznRyda001 3 жыл бұрын

this is late always wash first before u use it wash out ur ice cream tub n use it for ice

@amehta23 3 жыл бұрын

I find there is an after taste with silicone molds

@dkay636 3 жыл бұрын

You need to wash them

@NsyShwl 7 ай бұрын

I would say use distilled water so that there are no extra flavors added from the fridge's water..

@904mappy3 2 жыл бұрын

🍊

@cindy1274 Жыл бұрын

Quiet your gonna wake the kids lol

@Marcothemillionaire 2 жыл бұрын

2031we go to the moon still can make moon rock ice cubes

@flybyairplane3528 4 жыл бұрын

Hello, but I see LG, has ROUND ICE AVAILABLE, MY REF/FRZR HAS CRESCENTS, BUT I use RO WATER, so they come out CLEAR, having zero minerals in the water. Cheers 🇺🇸🇺🇸🇺🇸🇺🇸

@iandoingstuff 4 жыл бұрын

Flyby Airplane sweet! Making clear ice is on my todo list.