Didn't the previous classic have these springs as standard, as the holes are already in the seat , RE should of fitted these as standard on the Reborn
@vincentperez3160 Жыл бұрын
Great job! I plan on getting the low rider seat from RE and will reference this vid. Thank you for a thorough install vid. Liked 👍
@Motoccino Жыл бұрын
damn you are tempting me more and more with these videos towards the king! You should also consider running it as a single seater for a while! it looks total clutch!!!
@motovin77 Жыл бұрын
You too deserve one king in your garage while you already have the soldier (Xpulse)😀
@automotriztechnica Жыл бұрын
I was waiting for this video, superb Vinay ♥️💐
@vscolkitt Жыл бұрын
I purchased the Signals Edition in Desert Storm in May, 2022. After watching "Ride with Warro" video, (adding the seat spring kit), I ordered the springs. My bike was only about a month old! The spring kit makes the bike look more "old retro" for certain but they are actually listed as "non-functioning springs", (so don't think your bum is going to receive any bonus cushioning!) I also noticed I was sliding forward a little bit on my seat because the springs raise the rear of the seat higher by about 1/2 an inch or about 12mm? I like the more "retro" style but prefer the rear of the seat a little lower (when it was "stock" height!)... so it's a toss up.. a little pro's and con's with these spring kits! I really wish someone would manufacture a new seat spring kit that wasn't as "stiff" and a smidgin shorter (so the seat would remain "stock height"). Since the kit was a little hard ... (time consuming) to install (due to the tight spaces where the bolts or fasteners are located, I will keep the spring kit ON for now and won't think about returning it to "stock". If someone comes up with a "spongier" spring kit however, I'll grab my wrenches and swap them out!
@motovin77 Жыл бұрын
Congratulations 🎊👏 on getting this amazing bike, fully agree with your thoughts on these springs.
@d4ddy0 Жыл бұрын
The springs are non functional…. Either the front tongue needs to be removed or the middle bolt needs to be removed. These were never intended to work.
@marsmerchh Жыл бұрын
Super Vinay ! 👍
@generalnguyenngocloan17009 ай бұрын
Looks better with your seat springs. 🇮🇳🫡
@bhushanpatankar233 Жыл бұрын
Can you please upload the video on how to assemble the all seat spring
@peeyush306 Жыл бұрын
Hey Vinay, can you make a video on how to take care of the paint scheme on this bike? I own the same colour and model, Feb 2022. Also, in my ownership, I have observed a few things with the bike. Can you comment on these? 1. Major issue: both of the disc brakes of my bike are making sound. The disc pads are getting rubbed with the disc. Some times the sound become unbearable. I took my bike to the service centre twice. In first instance, they rubbed the disc pads with sandpaper. Discs became quite for a while. Then, on second instance, though both discs were making the usual sound, front disc was also making a chi-chi sound. Agency changed the front disc pads. Costed me 250rs. Old brake pads are not worn out as I have only ridden 1500 kms. The chi-chi sound is not there anymore, but the usual sound of rubbing is there. Now I am again going to the agency with the issue. I friend owns a meteor and is also facing the same rubbing issue. Some people are also facing the sound issue as well. It seems the issue is very common with RE bikes. 2. The foot pegs position is very uncomfortable for me. You can not really place either of the foot completely flat on the foot pegs and also you may have to flare out the right leg out. This observation was also made by a youtuber named Stuart( from England). 3. Mirrors get loose quite easily. 4. The engine casing gets rusted quite easily. 5. Chipping of paint on the bike key insert section( black ring outside the chrome section). 6. Brake bite is lacking from my experience.
@fishbad13 Жыл бұрын
Hello its just decoration spring , but looks well 👌
@Vignesh_viggy Жыл бұрын
Only old classics and bullets bikes requires these Springs, it's job to reduce the transferring of vibration from bike to our body not only for the additional suspension, but in reborn we don't required because of J series engine.
@motovin77 Жыл бұрын
That's correct, here it is only esthetics and classic vintage looks only.
@PatrickLeFloch11 ай бұрын
To the extent that the springs are non-functional, simply stop the assembly after they are bolted to the seat and spare yourself a lot of fiddling in the fender/frame area. No one will notice the lower bracket is missing.
@generalnguyenngocloan17009 ай бұрын
Yea, it looks like a lot less trouble. I know some people even remove the fender. 😳
@pavan_mudkani Жыл бұрын
recently bought a classic ......i have one small doubt ... like old enfiels this reborn has both of its seats too close... so after using the springs will it spoil the seat covers due to continuous friction of pilion seat ?
@AS-vb2ciАй бұрын
Hello, I wonder if You could help me with a couple of questions about these seat springs. First; does the installation of springs increase seat height when using standard seat? And then does the springs have any additional suspension effect or are they just for show? Thaks!
@motovin77Ай бұрын
There is no apparent increase in seat height with springs, these springs are just for aesthetics and have no practical function or action.
@FerozKhan-ky1nr Жыл бұрын
Wow a perfect classic. After seeing this I would like to get the RE Classic one in my garage... do u suggest me for the city commute !!!
@motovin77 Жыл бұрын
Thanks 🙏 yes it's a great city bike, bit on heavier side but one gets used to it soon.
@anifa8276 Жыл бұрын
but ,, in service centre they replied that ,it's impossible to fit the rider spring ,,, they reply that you have to completely change the rider seat .
@motovin77 Жыл бұрын
This is available as an OEM accessory at RE showroom. But these springs for Reborn are non functional and only for looks.
@picsyart7lov Жыл бұрын
Hi does ur pillion complain when u ride over humps or uneven roads? Just askin cuz i want to set up my rear suspension the same as urs
@motovin77 Жыл бұрын
The stock setting is very comfortable. Didn't have any complaints so far.
@jobinjoy112911 ай бұрын
Hi... Is it possible to attach springs for the original RE touring seats??
@motovin7711 ай бұрын
You should be able to, since I have not done it, it's best to ask the RE showroom before buying them.
@manoharansridhar8699 Жыл бұрын
Bro the back seat any problem, play have the back seat.
@vickykooldude2010 ай бұрын
Since this is non functional. Can you suggest me an option to avoid vibrations and numbness? Literally I can't ride more than 20 kms
@motovin7710 ай бұрын
Well I never experienced any vibrations with or without these springs. Now I have just switched to RE touring seats, which provides better air circulation due to the ribbed pattern.
@purusottamsamal6336 Жыл бұрын
Sir new classic mai old classics ka seat install ho sakta hai kya please reply ❤️
@motovin77 Жыл бұрын
Not possible as chassis itself is different
@bhushanpatankar233 Жыл бұрын
I have tried but seat bracket holes are not aligning
@motovin77 Жыл бұрын
Sorry brother I didn't make a video, I followed the instructions which came in the box.
@souvikprofile5 ай бұрын
Do these springs are only show or do they really work?
@motovin775 ай бұрын
Just for aesthetics
@saratkumarjanisaratkumarja59485 ай бұрын
updown Q nehi horaha hai ???
@motovin775 ай бұрын
Fixed springs hai, just for show.
@mohanv7943 Жыл бұрын
Any difference in spring functionality after using it for 4 months?