Royal Kludge RK68 Mods | Gateron Pro Red | O-Ring Mount

Royal Kludge RK68 Mods | Gateron Pro Red | O-Ring Mount | Best Budget Keyboard

Рет қаралды 160,466

2 жыл бұрын

This is a budget mechanical keyboard with some cheap mods. Hope you enjoy the video. :)
⏱Timestamp
0:03 Unboxing
0:40 RK Red Switches
1:05 Disassembly
2:41 PCB Foam Mod
4:14 O-Ring Mod
4:57 Tempest Tape Mod
5:02 O-Ring Mount
5:28 Reassembly
5:44 Modding Stabs
7:03 Holee Mod
7:37 Lubing Stabs
8:33 Band-Aid Mod
9:13 Gateron Pro Red
9:55 Keycaps
10:15 Modding Spacebar
11:13 Sound Test (Before Modding)
12:07 Sound Test (After Modding)
13:27 Thanks for watching
Keyboard: Royal Kludge RK68
Plate: Aluminum
Stabilizers: Stock stabs (lubed w/ 205g0, Holee mod)
Switches: Gateron Pro Red (factory lubed)
Keycaps: Cherry profile PBT (by AiFei)
w/ PCB foam, Tempest Tape Mod (2 layers)
🎵Music:
Leavv - Tomorrow
Also - Seasons
Sleepy Fish - Library Card
📷Camera: iPhone 12 Pro Max & iPad Pro 2021
🎙Microphone: same as above (sorry I’m on a budget :$)
Thanks for watching

Пікірлер: 303

@hoangphuc4233 2 жыл бұрын

your videos made me feel so good, really relaxing, like...peaceful. thank you

@swampwcat 2 жыл бұрын

Thank you for replying. I’m very glad to know that. :D

@stephenbenedict4962 2 жыл бұрын

This is a slick video and keyboard mod - really enjoyed watching!

@swampwcat 2 жыл бұрын

thank you for watching. :D

@Unaffiliated1315 2 жыл бұрын

this is the keyboard i wanna get in the future! This video is very helpful! I've never seen someone put foam under the spacebar, great job!

@postvv 2 жыл бұрын

i recomend you a rk84

@NguyenVuNhatQuangA 2 жыл бұрын

i love this video so much, not many youtuber could make the video this slow for us to mod our keyboard. Thank you!

@swampwcat 2 жыл бұрын

thanky you. i wish i could make the videos that’s easy to understand and also follow step-by-step for all my audience. :3

@rica7405 2 жыл бұрын

i still dont know much about mech keyboards but stayed through the video anyway. the improvement in the sound and typing experience is superb wow and i like the color of the keycaps too! excited to receive my keyboard in the next couple of days bcs of this vid

@swampwcat 2 жыл бұрын

i hope you had a prefect journey with you keyboard. :3 thank you.

@malachi_hatessin3573 2 жыл бұрын

The music and the lighting in this video was extremely relaxing 🤍

@swampwcat 2 жыл бұрын

Thank you. :)

@genbuz1236 2 жыл бұрын

Great work. Really glad for this kind of video. Keep it up

@lemonsquares9888 2 жыл бұрын

i enjoyed this video a lot. That spacebar mod sound interesting and is the first time I've ever seen it. A lot of the bigger channels don't mention it too, i might give that a try

@swampwcat 2 жыл бұрын

thank you. i hope it’s useful in your case. :3

@BenMode 2 жыл бұрын

This is a nice one. I've been looking for a nice mod. Your is the best I've seen.

@swampwcat 2 жыл бұрын

Thank you for replying. :D

@TinyMaths 11 ай бұрын

Nice video; enjoyed the Lo-Fi tracks. I just got the RK61 delivered a few days ago and I love the keyboard; it's my second mechanical keyboard (I have a full-size Razer Huntsman which friend gifted me). I'm looking to do my first basic mod with the RK61 so that I can get it less 'clicky/hollow' sounding and more clacky/thocky sounding. This tutorial is above my skill level, however it was an enjoyable and insightful watch.

@rrgeada 2 жыл бұрын

it’s a really nice sound, great job

@swampwcat 2 жыл бұрын

thank you. :3

@adiznuts645 2 жыл бұрын

Jeez all this underrated keeb-related channels just keeps getting in my feed

@swampwcat 2 жыл бұрын

thank you. i am glad you like it. :3

@shibui691 2 жыл бұрын

music was so nice I actually forgot that I was watching a keebs video lmao, great vid hoping for more uploads soon

@swampwcat 2 жыл бұрын

thank you so much. i hope i could upload video more frequently too. :$

@jyudat4433 Жыл бұрын

your stabs sound so fire

@jeroenklio4451 2 жыл бұрын

you already know i liked, watched the whole video and now comment you deserve more fame, these videoes are relaxing as hell, love you man. i dont know how people use keyboards like that stock, literally hurt my ears haha

@swampwcat 2 жыл бұрын

Thanks bro! Love you too. ♡ ♡ ♡ Thank you for supporting me. I will keep doing my best. THANK YOU!

@Indydi 2 жыл бұрын

My RK61 Pro doesn't sound that bad, but it still needs some mods.

@smitdev 2 жыл бұрын

I love ur thumbnails keep up the great work!

@swampwcat 2 жыл бұрын

yeh. thanks!

@kittykittygumdrops Жыл бұрын

Nicely done!!👍👍👍

@BlitzenBolt 2 жыл бұрын

very relaxing video :) keep it going!

@swampwcat 2 жыл бұрын

Thank you. :)

@bebeh_gee 2 жыл бұрын

Great video! I am suuuuper almost convinced to try modding my keeb for the very first time. I've been watching so many videos and came across yours. After watching, I feel as if I can do it 'cause you make it look so easy! Any tips?

@l1dub155 2 жыл бұрын

Love the video, bought this board because you showed that you could mod it to sound nice. Cheers!

@swampwcat 2 жыл бұрын

Awww! Thank you for the positive response. :) Hope you enjoy your board too. Cheers!

@l1dub155 2 жыл бұрын

@@swampwcat I'm following your mods right now, and am just left with some stabilizer mods and switching out the switches. Do you have any tips on the holee mod?

@swampwcat 2 жыл бұрын

Sorry for that I got the keyboard mixed up. :p Make sure you have clean up all the factory lube! It would be hard to place on band-aid if the lube remains. Enjoy! :)

@jopri320 2 жыл бұрын

video that's worth to subscribe!! keep it up man

@swampwcat 2 жыл бұрын

thank you. i will do my best! keep going! :)

@developer2 2 жыл бұрын

this video is so relaxing i forgot why i was watching

@swampwcat 2 жыл бұрын

Haha thanks, so why were you watching for. :D

@piperkaiser7566 2 жыл бұрын

awesome mod aside, the gator plush is so cute watching u work !!

@swampwcat 2 жыл бұрын

haha yes he is. thank you. :)

@atebit8805 2 жыл бұрын

Those keycaps are gorgeous

@swampwcat 2 жыл бұрын

yes. love it. :)

@againstmachine498 Жыл бұрын

I fell love with this video

@chinye107 2 жыл бұрын

I am researching mechanical keyboard and chance upon your channel and watch the entire video! Now I may want to learn how to mod it 😂

@swampwcat 2 жыл бұрын

i wish you all the best with your mechanical keyboard adventure (rabbit hole). 😝

@user-xn4rt9xx9f 2 жыл бұрын

New subcriber bro very calm and relaxing

@swampwcat 2 жыл бұрын

thank you. :3

@kaiser5931 2 жыл бұрын

Nice video, so many people using the gateron pro yellow, it’s hard to find a video about the red version, many thanks

@swampwcat 2 жыл бұрын

I prefer red and don’t know why. ¯\_(ツ)_/¯ Going to make a sound comparison vid between these 2 switches soon. :D

@kaiser5931 2 жыл бұрын

@@swampwcat i think that 5g and bottom out force matter, anyway, yep keep going i think your videos r good

@quadingledale8031 2 жыл бұрын

best budget mods i've ever seen tho. definetely will try that spacebar foam mod. btw what kind of foam that u used both for pcb and spacebar?

@rorys5737 2 жыл бұрын

this vid is extraordinarily under rated

@swampwcat 2 жыл бұрын

Thank you so much. :D

@rorys5737 2 жыл бұрын

@@swampwcat np i am really looking foward to getting this on christmas. i will put holy pandas and monochrome pbt keycaps. i wll also add foam mod and other stuff

@AnaClaraCavalcante 2 жыл бұрын

Awesome vid!

@swampwcat 2 жыл бұрын

Thank you. :)

@chrysantdesu Жыл бұрын

I already mod my RK68 similar to this but a sec a go I just know that the puller at the top is for keycaps and the (sharp) one is for the switches. I use the sharp one for both keycaps and switches 😂😂😂 I didn't know the one above can be split up to be keycaps puller LOOLLL 🤣🤣🤣 thankyou!

@criscuevas1225 2 жыл бұрын

cant wait to do this on my rkg68!!!

@swampwcat 2 жыл бұрын

RKG68 probably sounds better than my RK68! have fun! :D

@muhamadrizal4 2 жыл бұрын

Thanks for the video, really helps me when i disassemble the board. For the o-ring i use 2 stack of them and leave the middle top and bottom screwless. it add some flex to the board lol.

@sudiks 2 жыл бұрын

Hi, very cool video, can you tell me where you bought keycaps?

@AnonymousKev 2 жыл бұрын

WOW! big difference

@swampwcat 2 жыл бұрын

The stock RK red switches sound so clicky. I even suspect I bought the blue switches. Haha.

@user-qs7dp6yb2x 2 жыл бұрын

Hey! Reaaaaally nice video. Want this keyboard even more now. Thanks for an easy to follow step by step. I have a question tho, why clip the legs? Are the keys too high bc of the foam? E: googled and found that these legs hit the pcb or whatever creating noise, for anyone else wondering.

@swampwcat 2 жыл бұрын

Haha, yes that’s right. It’s not necessary to do it. I’d like to try not clip the legs in my next build btw. :p

@slavic_commonwealth 2 жыл бұрын

aren't you both Russians? however, as I am.

@user-qs7dp6yb2x 2 жыл бұрын

@@slavic_commonwealth what? i am not

@slavic_commonwealth 2 жыл бұрын

@@user-qs7dp6yb2x I saw cyrillic letter in your nickname, automatically thought you were Russian. sorry)

@swampwcat 2 жыл бұрын

@@slavic_commonwealth neither am i haha. :p

@J-Pop 2 жыл бұрын

Amazing

@swampwcat 2 жыл бұрын

thank you. :)

@xHarrow 2 жыл бұрын

Nice video, I recently got this keyboard and I'm looking forward to apply some mods, where did you get the aluminum plate?

@swampwcat 2 жыл бұрын

Thank you. :) I bought this keyboard that came with aluminum plate in stock. I thought it’s all pre-builded with aluminum plate, didn’t it?

@Danko_HS 2 жыл бұрын

@@swampwcat Neah these are too heavy and stiff for aluminum. Most likely steel or some type of alloy.

@kavineshanuragavan7153 Жыл бұрын

i have ordered mine and will do some of the mods, but a lot of other modders used the case foam mod as well, is there a reason u didn't do it?

@aisonaa Жыл бұрын

this dude's pinky when he types I swear

@yehtutmin703 2 жыл бұрын

Amazing video! Love it. Could you also make a modding guide for RK71?

@swampwcat 2 жыл бұрын

oh no. i need to say sorry. i don’t have budget to buy a RK71. :C

@yehtutmin703 2 жыл бұрын

@@swampwcat it's okay. I wish your channel grow faster and get a lot of views so that you can create more contents without having budget issues.

@swampwcat 2 жыл бұрын

oh thank you. you’re so sweet.

@rendomize3954 Жыл бұрын

Hi, whats the difference between the o-ring mod and the o-ring mount? i know the mount is to give is a 'gasket' feel, but what about the o-ring mod on the pcb?

@Anakin956 2 жыл бұрын

Nice video, whats the reason behind clipping legs from the stabilizers?

@swampwcat 2 жыл бұрын

Thank you. :) The little legs usually hit the PCB and creating some noise. I’m not a professional, but you can check out Hamaji Neo’s video, he had explained it clearly. Here’s the link: kzfaq.info/get/bejne/Y9yYo6ub0dG2l4U.html Another video that Taehe Types showed us how he mod his stabs and the purpose of clipping stabs. That’s also a must watch video when you’re going to mod your stabs. Here’s the link: kzfaq.info/get/bejne/mapljc1ev82xfHU.html Enjoy! :)

@francccisss 2 жыл бұрын

可乐蛙的润轴套装我也买了，超级好用！

@swampwcat 2 жыл бұрын

love it so much. :D

@bigdaddytow3r Жыл бұрын

where did you get the oring box with the screws?

@paulgochoa 2 жыл бұрын

Nice vid! Hope you can put the links in the description:)

@swampwcat 2 жыл бұрын

Thanks. :) What links?

@paulgochoa 2 жыл бұрын

@@swampwcat Of the products u used for the mods:)

@swampwcat 2 жыл бұрын

Yes, thanks for advising me. I’d consider doing it. :D

@paulmendes9315 2 жыл бұрын

Wow.

@swampwcat 2 жыл бұрын

^w^

@SRPhantoms 10 ай бұрын

Wooooaaah can you link me specifically to the keycaps please

@thestreamreader 2 жыл бұрын

Can you cover how you did the orings a little better. May talk about how you got them to stay.

@swampwcat 2 жыл бұрын

it actually didn’t stay well. so i removed all the rings on this board. and it doesn’t sound that bad than i thought. i’ve mentioned it on my new vid. kzfaq.info/get/bejne/bdpgoMuVxLfclKM.html

@jheosayson65 2 жыл бұрын

I heard that in the tempest tape mod, the tape comes off after 1 day? is that true?

@ultraelectromagneticburniq439 2 жыл бұрын

i have a similar macbook set up like yours, nice. Kinda similar laptop stand then my keyboard is rk g68 👍☕️

@swampwcat 2 жыл бұрын

and similar keyboard haha. how’s the G68? i noticed that there are different versions after i got mine.

@ultraelectromagneticburniq439 2 жыл бұрын

@@swampwcat i don’t know much about keyboards but it’s good, it has 2 usb-a and 1 usb-c. 3 connection modes, bluetooth, 2.4 ghz dongle, and wired mode.

@swampwcat 2 жыл бұрын

RK G68 is the newest RK68 keyboard. kind of better than mine. :3 but both are good.

@Ju_an 2 жыл бұрын

What could the leg clipping mod be for?

@ralphbanks4333 2 жыл бұрын

Pinkies out baybee

@swampwcat 2 жыл бұрын

my little pinkies don’t want to work. :3

@johnzhao5194 2 жыл бұрын

Good video. BTW I can never type with my pinky fingers lifted like that.

@swampwcat 2 жыл бұрын

haha i’m training my weaky pinky now. :D

@milagrosrojas277 2 жыл бұрын

Hello!!! Just found your vid… was wondering if you also got a problem with the S letter. Mine is broken.

@swampwcat 2 жыл бұрын

ah. i don’t. have you tried to reinsert the switch? or maybe reset the keyboard system?

@reaphics9978 2 жыл бұрын

For lubing the stabilizers, Is it fine if I use permatex lube ? because that was the lube wildcat used for his mod. just wondering

@swampwcat 2 жыл бұрын

yes! it does. but i saw most of people use permatex for the wires only.

@harrycastillo5116 2 жыл бұрын

what did you use as the bandaid for the stabilizers? Btw great video Bro got a sub from me :D

@swampwcat 2 жыл бұрын

It’s telfon tape. I got this tape with my lubes. Decide not do waste it. :D Thank you for supporting me. :)

@harrycastillo5116 2 жыл бұрын

Btw bro can i ask the size of the O ring you used cuz im planning on buying them but im scared that it may not fit...

@swampwcat 2 жыл бұрын

@@harrycastillo5116 It’s 4x2mm, but actually it’s too small. It fits but also easy to break. After I bought it I realized that the inside diameter is only 0.4mm (way too small)(2mm means thickness by my seller)(yes I am stupid ¯\_(ツ)_/¯). The bigger one that I can get is 6x2mm and the inside diameter is 2mm. I think this size might be better than the one I have, but haven’t buy it yet. Must make sure the inside diameter not too small before you buy one. :p

@Krimxon_ 2 жыл бұрын

where did you buy your o rings

@louis3318 2 жыл бұрын

where do i get the key caps from?

@mochoahope538 2 жыл бұрын

Nice mod! Can I get a link where you have purchased your mount phone holder?

@swampwcat 2 жыл бұрын

you mean tripod? i'm using Bosch BT150. www.amazon.com/Bosch-BT150-Compact-Extendable-Adjustable/dp/B00SIL5O36

@blanxfn 2 жыл бұрын

Hi, do alpaca v2 switches fit on this keyboard? I heard the led bulges out so I’m confused if it can actually can fit.

@swampwcat 2 жыл бұрын

Merry Christmas! On, I don’t have any alpaca v2 switches, so I don’t know that actually. It’s my dream switches but kind of expensive to me. This PCB does support 5-pin switches tho. :)

@carlosc2849 2 жыл бұрын

cool video! will probably buy one of these soon. by the way can you give me a link for the foam if you can please?

@swampwcat 2 жыл бұрын

i’m sorry. it’s just some cheap foam i bought it from grocery store. pe foam might be better. :)

@carlosc2849 2 жыл бұрын

@@swampwcat oh ok !

@SwiftyKeebs Жыл бұрын

try flipping the space bar thats how mine thocced

@aoifekun 2 жыл бұрын

Do we only need to poke 1 hole for each switches on the foam? What about holes for the metal pins?

@swampwcat 2 жыл бұрын

because of my foam is too thick. so i must to poke the holes. but if your foam isn’t that thick maybe you don’t have to. and the pins are fine. just make sure to insert they straight into the pcb. :)

@Maxi_utp 2 жыл бұрын

I like your crocodile doll 🐊

@swampwcat 2 жыл бұрын

thank you. :)

@dinhphucnguyen26 2 жыл бұрын

between gateron pro milky yellow and ktt red wine, which switch is more clacky?

@swampwcat 2 жыл бұрын

milky yellow imo.

@jacobmurphy2366 2 жыл бұрын

Idk why those first 50 seconds I was dying laughing from those failed attempts at getting the keycap off

@swampwcat 2 жыл бұрын

haha i was embarrassed then. was thinking of re-record the video or keep on. lol

@brocky 2 жыл бұрын

I just noticed this at 8:10. What's the black thing under your Macbook Pro?

@swampwcat 2 жыл бұрын

it’s my USB hub. :3

@brocky 2 жыл бұрын

@@swampwcat 😆 I thought it was some kind of cooling fan

@blu3berry683 2 жыл бұрын

Where do I get these keycaps

@Phiz787 2 жыл бұрын

Nice mod video! The budget boards can become amazing with the right attention! You are losing a ton of typing speed though because neither pinky hits any keys.

@swampwcat 2 жыл бұрын

thank you. :) all the things that my little pinkies have done is… stay on my hands and doing nothing. haha. :P

@kirkwahmett 2 жыл бұрын

Please send the link to where you got that crocodile toy from

@swampwcat 2 жыл бұрын

i took it home from the swamp ._. jk haha i got it from a local furniture store in Taiwan, called “working house”. here’s the link of product: www.workinghouse.com.tw/products/0684774 but it doesn’t seem to be shipping overseas. :

@harps7366 2 жыл бұрын

I’m going to get this board for Christmas but I just wanted to know if anyone could send me a link to polycarbonate plates that fit this board? I heard they sound nice with tealios

@swampwcat 2 жыл бұрын

Sorry for that I really don’t know where could buy the polycarbonate plate for RK68. I hope you find out soon. Merry Christmas. :D

@biberkatze 2 жыл бұрын

Nice build. Do you have the exact name of the keycaps they look awsome.

@swampwcat 2 жыл бұрын

it’s from a Chinese company called “愛菲外設”. i bought them on taobao. but it’s unavailable for sale now. here’s the link: m.tb.cn/h.fP2I2OE?sm=111294 i also searched on aliexpress and found this very similar keycaps. here you are: m.aliexpress.com/item/32877690577.html hope you can get what you want. :D

@biberkatze 2 жыл бұрын

@@swampwcat thank you very much

@Indydi 2 жыл бұрын

Because of the speed and lack of narration and detail, noobs like myself will need to do some more research. I have the RK61 Pro with red Gaterons and PBT keys, and while mine sounds better as stock, I would love to have the sound you accomplished and hopefully cushion the bottom-out. I'll look for more detail and explanation in other videos. I do appreciate the walk-through though. I'll save it and refer back.

@shadow-_-2389 2 жыл бұрын

Is the Corsair K65 RGB MINI 60% good

@swampwcat 2 жыл бұрын

oh i don’t have that one i really don’t know. sorry.

@100_vadlavikramchary9 Жыл бұрын

How did north facing pcb fit cherry profile keycaps

@ambasing69 4 ай бұрын

They do fit cherry profile keycaps but will make a harsh bottom out feel

@anumnum2012 2 жыл бұрын

I had the same problem with the keycaps and switches

@swampwcat 2 жыл бұрын

yyyyyes. that’s hilarious. :D

@eviestudies 2 жыл бұрын

what tape did you use for the holee mod?

@swampwcat 2 жыл бұрын

It's telfon tape.

@nicolandre9041 2 жыл бұрын

Hey can you give me a link for where you got the O-rings, I want the exact size you got it :)

@swampwcat 2 жыл бұрын

here you are: shopee.tw/product/138477258/9358681371?smtt=0.3364680-1642018930.9 i bought them at my local shopee website. not sure if you can access it? but i’m sure that i can give you the size i had. it’s 4 x 2 x 0.4mm. and the inner of 0.4mm is too short for the screw. i’d like to buy other rings next time.

@michaelstenyashin3921 2 жыл бұрын

Could you please link those keycaps with Russian legends? I myself am Russian and still struggling with blidntype, so I could really use some high-quality PBT ones with legends in my native language haha. Really nice video btw, keep up the good work!

@swampwcat 2 жыл бұрын

even if i got the Russian symbols on my keycaps. i still don’t know how to type in Russian. haha. :3 i bought them on taobao. but it’s unavailable for sale now. here’s the link: m.tb.cn/h.fP2I2OE?sm=111294 i also searched on aliexpress and found this very similar keycaps. here you are: m.aliexpress.com/item/32877690577.html hope you can get what you want. :D

@WtfISLW 2 жыл бұрын

You can get higher quality ones at 21kb or kb21

@stuffy3320 2 жыл бұрын

I am looking for a custom keyboard build and this is what I have so far, I came to you as your videos are really nice, and you are really underrated, any suggestions. Requirements: TKL or 65% ( Must have arrow Keys basically ) Must not have any odd colors, only black and white. Must be hot swapabble, I want to lube and tune switches and the stabliezers, and the entire keyboard. Must include a wrist rest. ( I wasn't using a wrist rest for the past 4 months, and I can feel tingly and burning in my hands already. ) Price range: 120- 170 U.S.D 200 maybe And that's all this is the list I have come up with: Rk68 or the YUNZII KC68 Akko WOB PBT keycaps Akko Vintage white switches Razer Wrist Rest

@swampwcat 2 жыл бұрын

Your list sounds very nice bro. I'm not familiar with YUNZII KC68, but I'm sure that RK68 is pretty worth for the price. For the budget keyboard I also recommend you Tester68/CIY68 (about $15-30) and TM680/LK67 (about $60-80). I bought those 2 boards but don't have time to mod them yet. For the switches, I don't have any Akko switches but it's quite famous budget switches. If you are looking for linear switches that KTT red wine (about $0.22/piece) would be another good chioce imo. It sounds so thock after some lubing. Here's the sound test: kzfaq.info/get/bejne/m7qmY6-KrNbJhJc.html And the keycaps yes Akko yes! People in my country make fun of Akko say that it's a keycaps company making good quality of keycaps but average level of keyboard haha. I hope it helps and enjoy your keyboard. :)

@thinklegend7775 2 жыл бұрын

If tou 2qnt a custom, you can get the kbd67 lite from kbd fans

@kuyt20 2 жыл бұрын

@@thinklegend7775 - Won't that eat a lot of his overall budget? For a $160 build, with good quality switches, keycaps, stabs, etc., I'm not sure KBD67 for about $120 is the right choice. It just wouldn't make enough difference to the sound profile to justify the much higher price.

@thinklegend7775 2 жыл бұрын

@@kuyt20 well I can't seem to find a better choice for that price, in fact, I don't even know a keyboard for that price

@kuyt20 2 жыл бұрын

@@thinklegend7775 - While finding good quality switches and keycaps for a total of $40 including shipping is possible, its going to be damn hard depending on where he lives. If he is not adamant about south-facing switches, he can go for the LK67 and get long stem switches to eliminate possible cherry profile interference.

@kudia_qq8442 Жыл бұрын

Друг, где можно приобрести эти кейкапы?

@dailydoseofbenadryl5096 2 жыл бұрын

bro you good? youre holding your pinkies up during typing. you can relax, ive already liked your video.

@swampwcat 2 жыл бұрын

Haha yes I’m good, probably a little bit nervous during shooting. Maybe my pinkies always look this weird when I was typing. :D Thank you.

@Sudegink 2 жыл бұрын

That left pinky wants to fly away

@swampwcat 2 жыл бұрын

Don’t~ don’t fly away I need my pinky so much~ haha~

@OldHeadVIK 2 жыл бұрын

What was that you used for the holee mod? I'm out here buying band-aids

@swampwcat 2 жыл бұрын

it’s teflon tape. i got it from a package with lubes. band-aid is fine too. :)

@OldHeadVIK 2 жыл бұрын

@@swampwcat ya but working with band aids is such a pain

@ShirOwOkun 2 жыл бұрын

Great video, I recently bought RK61 which is almost the same, just doesn't have few keys on the right side, I will inspire by this video. Btw I don't know what type of tape did you use, is it like paperish-feel tape or more like smooth rubber?

@Aphliz 2 жыл бұрын

The best tape to use is masking tape, it’s not supper sticky so u can reverse it if u don’t like it.

@swampwcat 2 жыл бұрын

thank you. :) yes it’s masking paper tape. it’s cheap and useless. accidentally found out this tape in my room. really didn’t remember when and why i bought it. haha.

@swampwcat 2 жыл бұрын

and right as @@Aphliz said that it’s not really sticky so it’s very easy to remove. :D

@ginogalup8657 2 жыл бұрын

Le puedo poner swiches akko rose red ? O cualquier otro

@swampwcat 2 жыл бұрын

yes you can! i'm planning to buy some akko cs swithes too. :3

@LUCY_2215 2 жыл бұрын

What is the tape that u used for holee mod?

@swampwcat 2 жыл бұрын

It’s teflon tape.

@everchann 2 жыл бұрын

its my first time knowing about the spacebar mod. my keyboard is rk 918 is it moddable?

@swampwcat 2 жыл бұрын

yes it is. you can give it a try. :3

@everchann 2 жыл бұрын

@@swampwcat are the switches like that too? like i can remove it without desoldering? im kinda scared to open my keyboard cos i dont have the tools like yours yet. can you give me a list of the tools you used?

@meowgumin344 2 жыл бұрын

This isn't the 2021 ver?

@jywu1212 2 жыл бұрын

You can try tape mod.

@swampwcat 2 жыл бұрын

yes, i did tempest tape mod on this keyboard and love how it turned out. :)

@anonymouse9593 2 жыл бұрын

can you please do a sound test with lubed rk red switches cuz i have the same board

@swampwcat 2 жыл бұрын

Oh! This was actually not on my plan list, but I’ll do it for you. :) May take some time, because I’m a lazy person (shh).

@anonymouse9593 2 жыл бұрын

@@swampwcat its alrit i have done it

@Aphliz 2 жыл бұрын

Just wondering is it the RK855 or the RK837?

@swampwcat 2 жыл бұрын

it’s RK855!

@anonymouse9593 2 жыл бұрын

when a member of royal family types: with the pinky straight

@swampwcat 2 жыл бұрын

Haha yes I know my pinky looks awkward when I’m typing. :P

@tro11ing 2 жыл бұрын

hi from russia, thanks for using my grandma's keycaps

@swampwcat 2 жыл бұрын

haha hello! wait… so.. what kind of keycaps do you guys using now? no more Russian root?

@tro11ing 2 жыл бұрын

ahahah no, many people use russian root but i am not, only english, it looks more aesthetic idk:D

@swampwcat 2 жыл бұрын

same here! people in my country use bopomofo keyboard but i don’t. i like to have same other language symbols on my board like japanese or russian i think it looks cool haha.

@BlitzenBolt 2 жыл бұрын

any o rings on amazon you could recomemnd?

@sagtil2596 2 жыл бұрын

Get them from Aliexpress or Banggood!