Just in time, I was actually just looking at mine the other day wondering what would be the best way to go about adjusting it. And once again, another solid video. Keep up the momentum, your unleashing solid advice and good knowledge to a lot of people out here.

I appreciate how easy and straight to the point on how to replace the clutch cable on a warrior your video was.

Thanks a lot for your videos! Short and extremely useful.

That was a GREAT !!! video... Excellent photography /video and sound.

Great informative video...just re-adjusted the clutch as in the video...and it works alot better now...nice one..

Thank you! I just adjusted my clutch for the first time thanks to this video! Makes a huge difference.

Man, my clutch cable broke once again (3rd time in 5 years). So instead of paying someone to obviously install it wrong again.... I’ve decided to order a Barnett and do it myself, thanks to you having this video. I’m no mechanic, but your videos give me the confidence to take on tasks like this. Thanks so much for doing these Bryan! Update: Clutch cable installed, and bike is shifting like I’ve never felt before. Cable I removed was a good 6 inches longer than the Barnett I replaced it with, guessing this is why they keep braking, shops keep installing the wrong cables. :/ Want it done right, do it yourself, thanks again Bryan!

Excelente explicación , la mejor que he visto.

That was about the nicest and easiest display of adjusting that cable I've seen.. Nice work Bryan. simple and easy... wanna come check mine? lol

Another great video Bryan.

Thanks Bryan. Good timing again sir. Watching for 1M.

Nice video and good job bud👍👍

Thx for the tip, I will give that a look at here soon.

Great video! I recently purchased my bike in May with only 675 kms on it (Canada). It now has 2100 kms and it needs adjusting imo. I’m going to use this method.

Another great video. I replaced my throttle and clutch cables this year because the OEM cables braiding had rusted inside the clear coating over the years. Pretty sure I did it exactly as you described but I will double check. I know I had the spring in place so I may check without to see if there is a difference or not.

Thanks this helped.

Bryan are you still out there? I miss your videos. You’ve taught me a lot on my warrior.

Awesome! This video was sooo needed for this bike. Can you do one showing how much play should be allowed down at the clutch cable arm at the case once the cable is properly adjusted?

Take a drink every time he says "go ahead". 😎

@0:29 guilty as charged! Thanks for making the video Bryan. 👍

Hey bud amazing video thank you . I just bought a warrior , it has a barnett clutch on it. When I shift into first gear she walks a little forward. Will this fix issue or is that internal

Ok Im new to this. I added apes to my midnight star and when i put the new cable on it doesnt engage the clutch when you pull the lever. how would i adjust it to make it work as it should?

Forget the cable, I up grade mine to hydraulic, there’s a kit for the m109 that is easily adaptable , it’s not that expensive and come with all you need but the slave mount, you have to make one.

Hey man I have a question. I read the manual and it says 10-15mm free play at the lever. In the video you say a nickel gap? Idk what to go with.

I’m trying to figure out my clutch. Pull clutch in,pop into gear and it jumps forward and stalls. With bike off I pop into gear, pull clutch in and cannot move bike. Any help appreciated please

great video very well explain, I have one question about something related, when lubing the cable do you have to separate the part where you do the adjustment on the cable I am talking not at the top but the middle or you can do the lube from the top and leave the whole cable as it is. Thank you in advance for the reply.

working on a 2001 roadstar 1600 with a trike kit. ive noticed if i start it while in gear with the clutch pulled in the bike wants to lunge forward on me. i adjusted the cable and its still doing the same thing. is it possible my clutch itself is going out?

Can you do a video of how to replace the clutch cable?

Hi Bryan, great work again. I'm the head of the European-Warrior Forum and I linked some of your videos in our forum and the portal as well: www.european-warrior.com/Portal/riemen-wechseln.html

You said a nickel to a dime of free play but my manual says 10-15mm. I know they printed some of the wrong torques is that the case here?

Am I the only one still pissed off and confused