RTI Prophet 2; Fix a leaking valve.

  Рет қаралды 7,788

AirgunNL

AirgunNL

Жыл бұрын

My RTI Prophet II started leaking after a couple off 100 shots, so I took it apart and recorded the disassebly steps.
Link to the exploded view.
www.rtiarms.shop/collections/...

Пікірлер: 30
@garymurray5361
@garymurray5361 Жыл бұрын
Excellent, well done. I had the same problem, fortunately RTI collected the p2 and rectified the problem. Credit to RTI. I was all set to disassemble but my wife thought differently. She won.
@bokiminor5089
@bokiminor5089 Жыл бұрын
Usually these models leak at lower pressures because the material that closes the opening in front of the outlet is too hard. You can only help yourself with a spring that will be harder (have a smaller number of coils) or to increase the working pressure. In this model, it is the pressure that exerts pressure on the power of the closed blast valve itself. In the older model, this task was performed by a spring.
@AirgunNL
@AirgunNL Жыл бұрын
Yes indeed, but this one leaked also at high pressure. The valve spring in other models is there to close the valve again quickly after opening. It is not kept closed by the spring power. That is done by the pressure in the plenum itself. This is also the case with this valve only it closes itself quickly assisted by the plenum air, but after that the pressure in the plenum keeps it closed.
@griffwyn2968
@griffwyn2968 18 күн бұрын
There’s an Allen screw on the regulator on mine it’s much faster to empty the air.
@AirgunNL
@AirgunNL 18 күн бұрын
Yes, newer models like P-3 have that.
@weirhauch1002
@weirhauch1002 Жыл бұрын
The older version looks sturdier .Unfortunately even the updated version has got some problems ,the first version suffered from regulator problem .However,this airgun is super accurate and sturdy when adjusted and tuned the way you like it .
@AirgunNL
@AirgunNL Жыл бұрын
A broken o-ring is not a real problem I think...
@weirhauch1002
@weirhauch1002 Жыл бұрын
@@AirgunNL I think so too but other airgun beginners do not think the same .
@northeastverminhunters
@northeastverminhunters Жыл бұрын
my p2 has just started doing this also so ill be either sending it back or fitting the replacement parts but rti customer service is really good so hopefully it will be back up and running soon
@AirgunNL
@AirgunNL Жыл бұрын
It is an easy fix but you need to add glue to the valve pin thread. Otherwise it will leak again due to the fact that the valve nut will loosen due to the hammer strikes.
@northeastverminhunters
@northeastverminhunters Жыл бұрын
@@AirgunNL mine is tight but the o ring in the stainless part looks pretty bad so rti are sending out new parts 🙂
@northeastverminhunters
@northeastverminhunters Жыл бұрын
NEW VALVE FITTED AND NO LEAK SO FAR 24HOURS ON
@AirgunNL
@AirgunNL Жыл бұрын
A quick update after another leak (same issue). The problem was not the nr, 60 o-ring but the valve pin nut comes loose from the valve pin (nr. 33 and nr. 34). Then o-ring nr. 55 breaks. See these spare parts www.rtiarms.shop/collections/parts-addons/products/spare-parts-rti-prophet-ii The fix is to add some loctite or glue to the valve pin thread and then screwing on the valve pin nut (and place a new o-ring nr. 55 of course).
@northeastverminhunters
@northeastverminhunters Жыл бұрын
hi is this part just screwed together hand tight ? thanx
@AirgunNL
@AirgunNL Жыл бұрын
@@northeastverminhunters Yes but it needs glue...
@vincehogg8935
@vincehogg8935 Жыл бұрын
Is there a separate metal valve seat like some PCPs or the valve just seals on part of the block? If its like that it will be difficult to polish. At time 4:17, the inside of part 36 looks quite rough. Thanks for showing internals. Interesting valve. I think Gregor will show a strip down soon.
@AirgunNL
@AirgunNL Жыл бұрын
There is no seperate seat. I polished the plastic valve seal and made it a bit concave.
@rickrazz7136
@rickrazz7136 11 ай бұрын
I Have the Priest 2 and my leak seems to be coming from the bottle / reg or the reg/flash stock. Are there o rings in these two areas that could also cause a leak. My leak occurred after a cross-country plane trip where I drained the pressure and when I attempted to fill the gun again i heard a pop and big leak sounds from the bottle area.
@AirgunNL
@AirgunNL 11 ай бұрын
Yes there are o-rings. On the bottle and on the regulator thread. Use some soap water to check where the leak exactly is and unscrew the bottle and regulator and replace the oring.(13x2 or 17x3 (mm)) www.rtiarms.eu/assets/docs/RegulatorPriestExploded7.pdf
@rickrazz7136
@rickrazz7136 11 ай бұрын
@@AirgunNL Great info and suggestion Thanks
@j.verfaillie5742
@j.verfaillie5742 Жыл бұрын
Leuk een Nederlander die een kanaal heeft maar spijtig in het Engels. Ik vind het raar ondanks dat de sport meer bij jullie dan hier in België beoefend wordt heb ik nog maar een iemand gevolgd die bijdragen levert. Is het uit schrik dat de flikken meekijken.? Gelukkig zijn er goede kanalen in het U.K en in de U.S.A. Haal er alle informatie uit video's en veel reviews vooraleer ik een nieuw stuk aankoop in Nederland omdat er meer zaken zijn en geweren mogen in België met koeriers of met Bpost niet opgestuurd worden. Heb ook al in Spanje gekocht. Zou graag eens weten hoeveel onze staat aan belastingen misloopt (21%). Als ik mijn eigen rekening maak, heel veel. Veel succes verder en blijf gezond en schiet veilig.
@AirgunNL
@AirgunNL Жыл бұрын
Bedankt voor je feedback. Ja in het Engels, want anders is het bereik erg klein... Opsturen van buksen is idd lastig. Ik heb geprobeerd een 2e handse van mijn collectie naar USA te sturen, naar UPS en DHL werken er niet aan mee, helaas.
@j.verfaillie5742
@j.verfaillie5742 Жыл бұрын
@@AirgunNL Ja, je staat telkens met je rug tegen de muur. Zolang je maar binnen Europa blijft en dan nog. Hoop dat de wetten niet binnen kortste tijd veranderen in Nederland en België. Je weet beslist wel de toegelaten joules in de Europese landen. Maar 7.5 is dus helemaal niks zoals in Duitsland en toch zijn er daar die een FX kopen. Als je al een dure Hw of Diana koopt, daar kan ik me wel in vinden. Nu er zullen daar ook wel illegale luchtwapens circuleren. Zolang je maar oplet en goede buren hebt. Ja de tijd dat ik .22 munitie en hagelpatronen kreeg aan de toonbank van een wapen/ fietsenmaker op 10 jarige leeftijd is al lang voorbij. Denk daar vaak nostalgisch aan terug. Doei! Belgen zeggen salut.
@davidvazquez7862
@davidvazquez7862 Жыл бұрын
I have the same issue also a friend of mine we bought the same rifles
@AirgunNL
@AirgunNL Жыл бұрын
Ok you need to disassemble it and tighten the valve pin nut and/or put some glue to keep it fixated. You can also write the dealer or RTI and get a new valve.
@davidvazquez7862
@davidvazquez7862 Жыл бұрын
Thanks yes I did it but still leaks changed orrings they are going have to make something different because we are going to have the same problem all the time this sistem with orrings is always going to have problems you make one hundred shots an have to take apart the rifle to change orrings
@AirgunNL
@AirgunNL Жыл бұрын
@@davidvazquez7862 not if the valve pin nut stays fixated. I think RTI modified the valve seal seating so it does not come loose. The new valve I received from RTI does not come loose anymore.
@davidvazquez7862
@davidvazquez7862 Жыл бұрын
I tightened it and put a new orring plus I put lock tight on the thread an still leaks I’m going to ask for a new valve I guess a cuestión did you take the orring out and glued it ?
@AirgunNL
@AirgunNL Жыл бұрын
@@davidvazquez7862 yes, but the glue came loose. Probably too greasy to fix the nut. I also got a new valve, that does not leak.
@pipzza6733
@pipzza6733 Жыл бұрын
it seems to me this new version has become a very complicated gun, with uncertain results in accuracy and durability
RTI Arms P-3 Detailed Review-Part 1 Rear Block
8:29
Sharp Shooter
Рет қаралды 3,1 М.
How to rebuild a Rti Performance Regulator
29:07
Anything Airguns
Рет қаралды 14 М.
WHAT’S THAT?
00:27
Natan por Aí
Рет қаралды 14 МЛН
WORLD'S SHORTEST WOMAN
00:58
Stokes Twins
Рет қаралды 83 МЛН
MISS CIRCLE STUDENTS BULLY ME!
00:12
Andreas Eskander
Рет қаралды 19 МЛН
Inside Out 2: Who is the strongest? Joy vs Envy vs Anger #shorts #animation
00:22
RTI Prophet II - Full disassembly
39:09
Gregor Kamenšek
Рет қаралды 10 М.
RTI P 3
19:25
AAR - Andy’s Airgun Reviews
Рет қаралды 77 М.
Devongunsmith Diaries #47 Blaser F3 JAMMED SHUT!
19:57
Devongunsmith
Рет қаралды 15 М.
RTI Prophet II  5 5mm Reassembly and test Part 2
16:01
African Air Ordnance
Рет қаралды 6 М.
RTI ARMS PRIEST 1 - TUNING & ZEROING (PART 1)(ENGLISH SUBTITLE)
18:02
Vinong's Outdoors & Travel Vlog
Рет қаралды 2,4 М.
RTI Arms Mora - First tests
10:01
Gregor Kamenšek
Рет қаралды 20 М.
Cricket Valve stem adjustment
10:06
Ernest Rowe
Рет қаралды 382 М.
WHAT’S THAT?
00:27
Natan por Aí
Рет қаралды 14 МЛН