BTT Pi Board (An Alternative To RASPBERRY PI ) - Overview & Installation Guide

Рет қаралды 23,588

Жыл бұрын

Hi guys 🙂
With the Klipper fans growing and the shortage of Raspberry Pi boards, users are trying to find different solutions.
Meanwhile, some 3D printing manufacturers are making alternative solutions for the Raspberry Pi boards.
So, in this video, we will check one of Bigtreetech's solution, the BTT Pi version 1.2.
Here you can find out all about this new board and how to start using Klipper with it.
♦ You can find the BIGTREETECH BTT Pi V1.2 here (Not Affiliate Link):
biqu.equipment/products/bigtr...
🔶🔶🔶 If you like our work and want to help the channel, you can contribute using one of the following...
🔶 PATREON:
/ ruiraptor
🔶 PAYPAL:
Use our email to send your donation ( ruiraptor.channel@gmail.com )
🔶 You can also help by using our Banggood affiliate links posted below (costs you nothing and you are contributing to the channel):
You don't have to buy the item from the link. If you click on them and then buy whatever you are looking for works!
♦ Ender 3 V2
pt.banggood.com/custlink/DmDK...
♦ Creality Ender 3
pt.banggood.com/custlink/mmmG...
♦ Creality Ender 3 Pro
pt.banggood.com/custlink/m3D3...
♦ Creality Ender 5
pt.banggood.com/custlink/D3GE...
♦ Creality Ender 5 Pro
pt.banggood.com/custlink/mGGy...
♦ Creality Ender 5 Plus
pt.banggood.com/custlink/G3DE...
♦ Creality Ender 3 Max
pt.banggood.com/custlink/mvKy...
♦ SKR Mini V2.0:
pt.banggood.com/custlink/vKGY...
♦ Artillery Hornet
pt.banggood.com/custlink/mmDd...
♦ Artillery Sidewinder X1
pt.banggood.com/custlink/333d...
♦ Artillery Genius
pt.banggood.com/custlink/D3vy...
♦ Creality CR6
pt.banggood.com/custlink/DGmd...
Thank you so much for your support 😉
🔶FOLLOW US ON SOCIAL MEDIA:
♦ / ruiraptor
♦ / ruiraptor
♦ / ruiraptor
Music by KZfaq Library:
Palace of Roses - Aakash Gandhi
#Klipper #RaspberryPi #Bigtreetech

Пікірлер: 56

@sd4dfg2 Жыл бұрын

Just what II needed, thanks!

@InFamousStickFigure 7 ай бұрын

Awesome video, thank you for this. I'm in the final part of configuring my V2.4r2. And this board came with my formbot kit. Needless to say I would've been a little lost otherwise.

@TamasJantyik Жыл бұрын

I have a cb1 and works really well. I ordered and now have one of these, too. It is much more practical than the cb1, unless you have a manta board... It does not need any/much cooling. It stays between 45-60 celsius. (open air, not inside in a case/printer)

@MakerViking Жыл бұрын

I love my BTT Pi, it works really good.

@jericsm Жыл бұрын

Thanks for this, actually helped me decide between an orange pi or btt pi, i chose the btt pi. do you have setup instructions for the adxl345 on the btt pi? i can't get mine to work.

@MacFly669 4 ай бұрын

Thank you Rui ! 👍

@numaiomul13 Жыл бұрын

THANK YOU!!!!! i installed it directly in my voron without realizing that it has a micro sd UNDER it (which is not shown in it's manual) I i kept trying to flash it with the usb port.

@kravtsov2438 3 ай бұрын

Good guide! Спасибо!

@carlosrivas3440 7 ай бұрын

excelente video una pregunta como configuro para el adlx?

@sd4dfg2 Жыл бұрын

The long wire isn't the antenna right? It's the sticky pad? Do I need to worry about where it's mounted? e.g. far from the steppers, and not near the board? on or off the printer's metal frame?

@BlueeBubble 8 ай бұрын

can you install rasbian and OS on this like a normal pi?

@the3dhermit 9 ай бұрын

What is the screen that the BTT Pi is connected to via HDMI? I was having trouble getting my SKR board to connect to the BTT TFt, so I wanted to use an HDMI screen.

@carlosrivas3440 8 ай бұрын

buen video tengo una duda , hay veces que conecto a la corriente y no se conecta en la pc , tengo que intentar varias veces , sabes a que se deba? gracias

@botialoach1 Жыл бұрын

Does it work with Home Assistant?

@JFML1974 10 ай бұрын

Why do we have to remove the red bridge or Jumper??? Prevent power from getting from screw connector to USB C???

@petermontgomery2821 10 ай бұрын

Great product but the mounting holes are not the same. Just take a look at it. One is square the other one is not, you can visually see the difference between when it shows the top view of each board - just a heads up in case you were planning on using an existing raspberry pi case to use this board.

@cyrillowe1271 Жыл бұрын

Can I set this up without a screen?

@jstro-hobbytech 8 ай бұрын

Hey rui the board is on sale really cheap with the biqu b1 and talks about a cloud service but cant we just put klipper on biqu b1 and make it faster? I wonder if something isnt being said in the ad

@ruiraptor 8 ай бұрын

Hi, if it has the same board, in principle you can install Klipper on it and run it normally.

@diyreporpused7116 Жыл бұрын

boa noite estou com dificuldade em configura o input shaper com o pi v1.2 e btt adxl v1.0 nao detecta o adxl obrigado

@albertriba4823 4 ай бұрын

Se puede usar el connector usb c para conectar-lo a la placa de la impresora

@joewynn2445 10 ай бұрын

At 8:43 how do I find the klipper.bin file so I can install it onto my printer?

@KhOrganization 2 ай бұрын

8:32

@Adameus 10 ай бұрын

Hello! does retropie or recalbox or similar linux-based operating systems work on it?

@TheBudgetTechnician 3 ай бұрын

I don't think it would be viable. Less ram than what's usually on a raspberry pi. Don't see why you couldn't install a Linux desktop distro and go from there

@TheBudgetTechnician 3 ай бұрын

Not to mention the slower cpu

@carlosrivas3440 8 ай бұрын

como se hace la conexion del ventilador

@owenaero Жыл бұрын

I'm purchasing a voron 2.4 ldo kit and it wont come with a pi my question is can i use this as a direct replacement ill also be using a ERCF filament changer. or should i just bite the bullet and get a raspberry pi

@looxonline Жыл бұрын

Yes, this will do the trick for the LDO kit. Note that you can't run a DSI display from it though so you need to stick to the mini12864 or use an HDMI display.

@sd4dfg2 Жыл бұрын

This is what ships in the Formbot V0.2 kit.

@CS_Aspects Жыл бұрын

Just got one of these myself and got it working. Can you attach more than 1 printer to these? I assume you could but I haven’t worked out how to do yet.

@looxonline Жыл бұрын

Up to 3

@CS_Aspects Жыл бұрын

@@looxonline thanks, can you point me to how to do this please?

@looxonline Жыл бұрын

@@CS_Aspects kzfaq.info/get/bejne/btybrdOnzseYnZs.html

@LBM01028 11 ай бұрын

What does this Pi actually do? It seems to me that all it does is install Klipper firmware to your printers main board? Isn’t there other ways to install the firmware. If it replaces a Raspberry Pi then does it run Octoprint because that’s all I ever used my Pi for as my Ender installs firmware directly from MicroSD? Is it an alternative to Octoprint?

@skappalee Жыл бұрын

Hi, do you have rpi pin-out for SPI ADXL345? I can't get it work, thanks in advance

@mbot3dchannel Жыл бұрын

I also need it, a few weeks ago I bought a btt pi and successfully installed klipper, but when I tried installing the mellow version of adxl345, it couldn't work on the spi connector, and also got the error: invalid ff x e5 , etc

@asdwwhite 5 ай бұрын

What if ı forget to remove jumper before ı power it with 24V ?

@otann Жыл бұрын

Only 3 mounting hole locations are the same.

@MrRobertlbrown2 Жыл бұрын

One of the four mounting holes does not line up with the hole for the pi. This makes any mounting bracket or case designed for an actual rpi, unusable for the BTT pi.

@fusiondew 9 ай бұрын

Is it possible to just mount it with the 3 holes that do line up?

@srboromir452 8 ай бұрын

I still can't get a picture or the see the wifi AP

@ledzpg Жыл бұрын

👍

@DD8842 Жыл бұрын

The problem with these boards is support. Pi has the community

@waynemenzie Жыл бұрын

Totally agree. But if somebody has a current project and can't wait for a real Pi to be available it's good to have this option.

@looxonline Жыл бұрын

If your goal is to use klipper then there is ample support for this board. If your goal is to use it for a generic purpose then it is running armbian and the armbian forums are very active with heaps of support.

@brunofernandes8697 10 ай бұрын

8:10 @ruiraptor Como é que eu sei os settings da minha impressora? Que settings são esses?

@ruiraptor 10 ай бұрын

Olá, esses settings são relativos á board da impressora. Que board é?

@brunofernandes8697 10 ай бұрын

@@ruiraptor É uma creality v4.2.7, aquela "antiga" com steppers silenciosos

@brunofernandes8697 10 ай бұрын

@@ruiraptorEntretanto já consegui resolver o problema. Estava a descarregar o ficheiro config da placa, mas tive que alterar o nome dele para "printer.cfg" para o mainsale o conseguir ler! Acho que agora já devo conseguir acabar a instalação XD

@ruiraptor 10 ай бұрын

Veja no topo do ficheiro .cfg as instruções para esses settings: github.com/Klipper3d/klipper/blob/master/config/generic-creality-v4.2.7.cfg

@brunofernandes8697 10 ай бұрын

@@ruiraptor Obrigado, se eu tivesse visto este ficheiro já me tinha poupado muitas horas - -' No entanto, não consigo encontrar o ficheiro "out/klipper.bin". Mesmo no video, não encontro esse diretorio de "home/pi/klipper/out", mesmo pesquisando com a pesquisa Windows :/

@voxpop9 6 ай бұрын

In my opinion, it is unnecessary to install putty as you can simply use window's built in CMD / Terminal using the command: ssh (username)@(ip) e.g. ssh pi@192.168.x.x this will boot u straight to the password input screen. I recommend using terminal and this allows u to avoid installing 1 additional software that arguably isn't as nice to use.