Thanks mate appreciate you stopping by to leave a comment I believe it helps the channel out duno how or why, But it's still nice to hear from folk 😊👌👍

😆😬 I was waiting for the delivery it was on order but jobs couldn't wait 😂

😎

Yeah would be nice to know all the waste gets recycled again. But unfortunately it would mean building a blast booth every where jobs need doing and that wouldn't be feasible. The media used is recycled and the paint is water based as to minimise environmental damage 👍 its alot better to repair than scrap and rebuild so I would say blasting is still the better option for the environment I duno how to work the co2 out on something like that👍

@@Mobileblaster : I wasn't speaking to you directly but to the industry as a whole. We all, no matter what country we live in, need to figure out how to take better care of this house we all live in.

@davidtyndall8880 it's still better to blast and repair than replace the co2 that's involved buying a new truck to replace this wagon would be alot more than repair so I'm all for repair 🫡👌👍

Last time I checked there were no oceans near Barnsley. 😃. I do get your point though, eventually the River Dearne may carry some of the waste out to sea. I would say, though, its more down to those manufacturing, painting and coating things to ensure they use environmentally friendly products.

It won't.

thanks please come back later and watch it in glorious 4K I had a notification saying it was ok to publish soon as I did error processing is taking longer than usual should be ok in half hour or so :)

Thank you 😊

Yeah definitely a time saver also leaving the serface

Perfect for paint 👍👌

Alot easier with the blaster than anything else 😂😎

😊 welcome to the blast hood or back to the hood 😆👌👍

😏👌👍

🤗🫡😎

Yeah it has to be a deadmans style if you drop it you want it to shut off 😬 I was waiting on delivery for my new switch 👍

Thank you. 😅 Yeah I noticed that lol

😏👍👌🫡

Made all the better with a gust appearance from a legendary blaster 👌👍🫡🏴󠁧󠁢󠁥󠁮󠁧󠁿🇦🇺

@Mick Blackley SandBlaster cheers mate 👍. Felt privileged 😉😊👌

😎 Good luck future blast hood brother 🫡 I will admit these videos do make it look easy just keep that in mind 😉 don't take every thing I do as the only way because what works for me may not be what you find easier. So don't get disappointed you will have success if you put the hours in 👌👍

@@Mobileblaster Thanks Mick. I have learned a lot from your videos so will take that knowledge with me. Ill update if I get the job :)

Hya grate video how much grit do you use on this kind of job and how much do you charge for a 8 wheeler body we got one that could do with doing ?

Yeah totally get its so important to have a good deadmans handle it is on order but in the UK they want 300£ + for a micro switch I just cannot bring myself to spend that on a switch that's 3£ tops it's coming all the way from Australia 🫡👌👍

Thank you 😊

😊👌👍

thank you

😬😎🫡👍

Thank you 😊 welcome to the blast hood 👌👍

Speedy blast Ltd in Ireland are a similar company, mick does a fantastic job and we love your videos

😆👌👍

I have to blast in my job but our blast machines have a dead mans handle.. I take it this is just on a switch? Or should be 😅

@rossfairley6511 yeah I've got it fixed now but yeah it's a deadmans handle or should be lol. In England it's near impossible to find a electric deadman switch at a reasonable price I ordered mine from half the way round the world and it still works out cheaper by a long shot and to be fair it's only a micro switch in a plastic house I cannot justify the costs over hear 🫣

Thanks 😊

100% perfectly fine 👌 chrome rubber sillicon cannot be touched with this method of blasting 👍 plus the ram wasn't exposed at any point this wasn't lifted to the point it was exposed although it still wouldn't affect it even if I directly hit the chrome 👍

Indeed. The small experience I have had with grit blasting, well it gets everywhere. Just my experience.

@bernardkroeger4045 yeah it gets in places that I rather not mention 😂 this method once its hit the target is basically harmless that's how I know pipes rams seals etc will be fine 👌👍

The hi vis Road stuff isn't like any other vinyl it's backed with tin and very delicate once fitted they just won't pull off

Thank you appreciate that 😊👍👌 The co2 to replace this wagon and expense involved would be alot more so amited its looks bad but this is still the better option 👌 not to forget the media is approved recycled blasting media and the paint removed is water based.

It's was to put me on untill the 1 I ordered turned up. The driver of this truck was on leave so it kinda had to be done this day 👍 I know it's not ideal but it worked 👌👍

Easier than blaster? 😬

Hell no 😂 they won’t damage paint though.

I will admit I'm unsure exactly how many times this 1 truck has been blasted by me before but this company have 20 trucks 2016s and I've blasted them every 2 year ish 3 or 4 of the 2016s are left he's just upgraded to 2023s so it's going to be a few more years before I'm booked out doing these 😂 its the nature of the work these do even 2 year old tippers look beet up all ya can do is try and keep ontop of em 👌👍

😊👌 thank you welcome to the blast hood 🫡👍

😊👌👍

Rpb Nova 3 best I've used 👌👍

I once blasted a locomotive that was getting restored for a museum that was fairly easy to be fair just like a big block similar to a 20ft container but it's not something I get asked for regular basis. 😊👍👌

😕

Doosan 7 120 presure pot and a 850xl 👍

Totally depends on the job in hand as 3x 25kgs of fine or super fine can last anywhere from 35mins to 4 hour it's what ever the job requires 👌

ah quantos kilos de vidro vc gastou ... esqueci de falar de onde falo 😀 , sou do Brasil 👍

Hi Brazil this was done with 425cfm nozzle 850 I could do with 950 but cannot find 1 at 125psi it used 12x 25kgs but I forgot to show I did quite a bit more underside not shown I didn't time it but around 3 hour 👍

Plus the media that was in the pot duno how many kgs..

sensacional Mick , o trabalho ficou top demais ... agradecer mais uma vez a atenção, um grande abraço e fique com Deus 👍🤜🙏🙏🙏😀

Nah I don't paint stuff I leave that to the customer 👍 I make about as much as the next guy with a trade or skill 👍

Depends on your location?

Not enough haha the US guys (the green company) that sells ready made trailers mention numbers that quite frankly a doctor or other professional would struggle to achieve. In England wages are comparable to other trades 👍 the harder you work the more you get I suppose 😉

Depends if you're working for someone legitimate like the man you are watching in this video or a guy who cuts every corner imaginable and second guesses every obvious suggestion you make thus setting you back even further behind than square one for example trying to apply multiple coats of chemical paint on something (that just took an entire day to blast because he makes you keep reusing the same grit that by this point is like flour and blunt and useless) then leaves it out to dry in the pouring rain all weekend with wet coats all layered on with no drying time thus giving you the pleasure of having to scrape the ENTIRE THING by hand cos it's too sticky now to blast with what is essentially icing sugar all the while you're being criticised about "your" mistake then once all is said and done your calls get ignored and you'll just have to go sell your ps4 instead cos who needs to get paid anyway right?😅😂

Iron silicate 👌👍

it's good job anyway! thanks for your video

@user-je8ty5yr1r 🫡 I was gutted when I spotted the error message but the notifications was sent out at least the is a video to nearly watch haha

Jesus why are you watching this then? Go lay in the street and smoke your vape pen

@@gliderider7077 unfortunately I'm non smoker, so this is not possible. And 2nd video was promoted by YT, and beside the mentioned thing, I found it quite interesting. Have a nice day

@michaelb.4048 the media used is approved blasting media hear in the UK. The paint removed is water based and the truck was parked on the truck owners land that dose earth removal and recycling they was happy to accept the waste (Non-toxic to the environment or carcinogenic to wildlife) saying that I wouldn't like to breath in the dust hence been well away from anyone else working 👌 I'm glad you found the video interesting please free free to have a snoop through my library or other blasting videos hope you enjoy 👍

@@Mobileblaster thank you for explaining the details of the operation :-) something learned today

😊👌👍

It's not like normal vinyl it's tin backed and the tin rips heat gun/ steamer don't help in this case

Its on order 🫡👌👍

Yeah my deadmans switch was on order 😎

Must have been a news article about this as I've had this question quite a lot lately. The media used is crushed glass and copper slag both approved blasting media and both none carcinogenic the paint is water-based. I was always told that repair was always better than replacing 👍

😬 I don't like rushing into buying anything lol I have 1 on its way from overseas 👌👍

😳🙂

Uk £275+ vat Australia alot cheaper including delivery 👍

😏 only the best is good enough 😂

It's fixed now but I still have a backlog of videos that need making that's why it seams like a long time without a switch in reality its been about 5 to 8 working days 😎 some jobs I post in the playlist that's named unlisted content to see more stuff I blast that don't make the full channel 👌👍

Serface preparation is perfect for paint exceeding SA2.5 that's required for paint 👍

Какой у тебя стоит электронный клапан на бочке?

​@loganwhite9671 nosel 850xl I want a 950xl but hard to find 425cfm @ 125psi and it's a home made conversation from air to electronic

😏👌👍 I've got one onorder from overseas as they are 300£ hear (4/500$?) So it makes sense to buy from abroad 👌👍

These normally take 5 to 6 hour with 260cfm last 1 tuck 10 hour with 90cfm this was 3 hours with 425cfm the costs of operating are hugely different so don't always thing bigger is better a 3 hour job could cost me more than a 6 hour job 🫣

@@Mobileblaster ofc how more CFM how faster you are able to do bigger jobs and like you said the down side is probably you use more diesel maybe a bit more blast media idk how much more you using then if did in 6hours with less CFM but at the other you much quicker done with your work so working wise it more efficient

@Mhn-sz6yp yeah but it could be false economy because it cost more to work 🫣

Paint is water based and biodegradable media used is none toxic and the tape takes way too long to remove manually by hand eva way out side or in side the tape will eventually end up in a land fill 😕 repair rather than replace will keep this truck in operation for another good service. 👍

😎👍👌

Fastest and most efficient way I can think of 😊👍

​@@Mobileblasterasí es

😊 youtube is an amazing platform sometimes I'm promoted everywhere and others just don't get shown I suppose its to make it fair for everyone 😊👌👍

😊

Not nearly as much as some people may think. 😏👍

This may sound wired but every thing for youtube is and has been saved up for reinvesting into youtube so the gopros and drone are paid for from 3 years worth of youtube money 👌👍soon as it makes enough money more storage is needed but a hobby that makes a few quid can pay for its own upgrades 😊 business decisions are made from my business brain and nearly £300 for a micro switch or wait 6 weeks to import from overseas and get it at the value its worth I perfer to wait or the business head says wait 👌👍

😊👍🫡

😬🫡👍

🫡👌👍

😊👍

😊👍👌🫡

Anything that's cheap usually crushed glass this will depend on location because Australian garnet is cheap their but mega expensive hear in the UK haha Anything that will cut through the paint and rust usually leaves a nice profile for paint 👍

@@Mobileblaster

I understand glass dust so yes other abrasives are expensive I want to do this job in Turkey but lately very expensive machinery and equipment

@@onurictas517 it's not lately mate it's always been expensive 😂

@@Mobileblaster

I cannot remember for sure 👍

😊👌👍

😊 your right it was a pain and to find a trigger that's reasonable price in the UK was impossible I ended up getting 1 from half the way round the world and it's still worked out better deal👍

Not very long around 3 hour

😂👌👍

Crushed glass 👍

👌👍 appreciate your feedback but when I leave the music out the videos get too much for even me to listen to and I'm kinda a custom to that noise haha👍👌

Yes it's water-based and biodegradable none toxic also the media used is recycled and a waste product that's silliac free and none toxic.

@@Mobileblaster I find it very hard to believe that this truck was originally painted in waterbased, biodegradable non-tox paint, and that all the reflective strips were biodegradable and glued on with a waterbased, biodegradable, nontoxic glue....I would imagine it to be something like an acrylic polyurethane enamel or like, which is only slightly less toxic than "industry standard" paints and still considered the main reason for asthma and allergies.... but hey thats just me..... being a painter who worked in the truckindustry for decades.... but I could be wrong...I may have worked the only place where biodegradable, waterbased, non-toxic paint and glues were not used....

@dockingtroll6801 You may only purchase non-compliant 2K products if you intend to use them for industrial or agricultural uses and not for automotive purposes as this is now illegal. Since 2007 but you would know this working in this industry? So I'm fairly sure it was water based as I was the 1 to order the paint and 25 of these was ordered from Thompson body's without paint. We're would you imagine the stickers would end up of I spent alot of time pulling them off and putting them in the bin? Landfill so what's the difference hitting this land or aa council run landfill? It's still better to repair than replace for everyone involved including the environment well apart from the guys who build new trucks

@@Mobileblaster Thx for setting me right and making it clear. I am glad it has been taking care of now, and yes I have been away for a while since I am now retired, so the question was genuine enough. Thx for youyr vids and for taken the time to explain.. Good man ;-)

@dockingtroll6801 not a problem 👍 everyone has an opinion and I will listen to everyone's. Some people only see the negative side but asking questions is what its all about. A lot is going off in these videos that aren't shown hence why I never say they are a how too because simple stuff to me that's a must that I do off camera is hard to explain or simply boring like every job gets its own risk assessment and method statement data sheets also daily safety checks air monitoring and quality even regular psi checks. All this is what I prefer to keep to myself as I still need to be 1 step in front of my closest competitors 😏

Depends what your comparing it 🤔

😏👍😊

It's on order 🫡👌👍

😂 none I'm just turning the wires together 😬

Compressed air pumps media in this case crushed glass and abrasively removes unwanted finishings 👍

Thanks you 😊

😊

Aprox 15 years to master the equipment then 15k compressor 17k van 25k other equipment forklift blast pot ya could say another 10k in pipes nosels cuppings 25k a year unit rent then the derv and media as consumables oh and not to mention insurances and services road tax then the office equipment needed to build and maintenance of the website wages for accounts and invoices I'm sure I will have missed something off as with any business small consumables are soaked up with other bills (such as helmet visors etc etc) 😉👌

🫡👌👍

England mate 🏴󠁧󠁢󠁥󠁮󠁧󠁿

@@Mobileblaster I sent you e-mail.

Or just wire it to a little push button switch

@@Patriot0331 Now you're talking big-money lol

Haha 300£ (400/500$?) for the switch in the UK hence why its on order from over seas just takes a little while for delivery 👍

It can be done on any level this is industrial scale but blast cabinets will be more manageable?

@@Mobileblaster i just wanted to know what type of material you use ?

@@CEA1 crushed glass and iron silicate 👍

@@Mobileblaster So the crushed glass & iroc silicate mix with environment (air) or they settle down in soil ? just wanted to know if it is safe. Those cabin sandblaster looks safe 😌

@CEA1 yeah the products I use are recycled and a waste product none toxic and biodegradable 👍

😊👍

Oh cool please feel free to drop some tips or if you notice something I could be doing better please do so I'm more than happy to make my day easier or faster 😊

😂 it's on order shipped from over seas we cannot get this type in the UK and it looks to be a good one 👌👍

Depending on the work load you plan on doing at what rate of speed or if you want new or 2nd hand will determine all of that 👍 you could be setup blasting for a couple of grand but to do it right your looking at alot of money forklift compressor storage unit truck insurances training blaster etc etc

And how much experience do you have with either? Because from my experience I have I can say categorically that any commercial lazer cannot do this type of work. Speed efficiency and quality of the finish a laser cannot win in any category. At this moment in time

I've done some contracting work for the offshore side of Siemens before 👌👍

Less than the alternative 👍

Sorry what?

👍