Nice fabrication on the rest end of your bus 🚌👍🏻🏴
@stevedaniels1558 Жыл бұрын
Super work. I admire your attention to detail
@oiygfdxssfgg Жыл бұрын
Great work
@stephenbarnett1366 Жыл бұрын
Rust never sleeps
@Vangabonders Жыл бұрын
and stock never goes out of style
@alansturgill4861 Жыл бұрын
Your welding is getting even better
@ikaro1120 Жыл бұрын
Awesome progress 😊
@Vangabonders Жыл бұрын
Thank you! 😊
@ewanstewart80117 ай бұрын
Your work ethic is second to none 👍🏻🏴
@johnhartevw9 ай бұрын
Hey Kris - Your meticulous attention to detail and the depth of your research truly shine through in your content. Your dedication to the process and your commitment to quality are both admirable and inspiring. I'm genuinely impressed by your expertise and the effort you put into every aspect of your work. Keep up the exceptional work - it's truly appreciated!
@mrlondon963 Жыл бұрын
Good narration
@Vangabonders Жыл бұрын
Many many thanks
@davidwood1923 Жыл бұрын
Fabulous Work... My Brother. I Took a Rusty Clapped Out '67 Ford Truck and It's Looking Good Now. Most Rusty Metal Replaced and or Cleaned Up Painted and or Treated
@jeroensmit2520 Жыл бұрын
I ve been watching this entire series over the past few days andi am impressed with your progress, on the bus and your skills. I dont understand why you have this little viewers. Keep going strong!
@The35speedster Жыл бұрын
Media blasters are inexpensive. Use that instead of naval jelly
@rafaelmachado3682 Жыл бұрын
Nice video
@enriquelopez9124 Жыл бұрын
Awesome job 👏 👍🏿
@raysher265 Жыл бұрын
Another awesome episode thanks Tangy is coming along well
@fiftymilifty Жыл бұрын
Allways learning something. Good job
@justintreweek7755 Жыл бұрын
I'm enjoying this series
@wychan2004 Жыл бұрын
Soundproof and also automatic sliding door
@johnturner70608 ай бұрын
Impressive quality work
@Vangabonders7 ай бұрын
Thanks a lot 😊
@dgadver Жыл бұрын
Great!! As usual!!!
@mikeunum Жыл бұрын
Amazing.
@philcappellini2820 Жыл бұрын
Great work!!! Well Done!!
@tomdale1313 Жыл бұрын
good stuff, txs for sharing...
@FeveredMind Жыл бұрын
Go Go Go! Great work as always!
@joefortune6933 Жыл бұрын
Looking good, can't wait for the subi install
@Vangabonders Жыл бұрын
You and me both!
@griffergerbille5858 Жыл бұрын
Every time I watch one of your videos I'm glad you decided to start posting again because watching you restore your bus has so far been a long and fun journey.
@pstreetgarage7304 Жыл бұрын
An other quality repair and quality video
@darionherbert8449 Жыл бұрын
Great content, I'm about to start a restoration on my 1990 nissan sentra and these videos give the motivation needed I can't wait. New subscriber
@Vangabonders Жыл бұрын
Good luck on your project! Glad I could help motivate you
@glen4130 Жыл бұрын
Great work, I wouldn't know you have never done this if you didn't say so.
@supremebeing7834 Жыл бұрын
beauty!
@adamford3021 Жыл бұрын
Awesome work.
@garymucher4082 Жыл бұрын
You absolutely have the right attitude about removing all rust. Doing that means when you seal everything back up, it is like new... No shortcuts repairing vehicles that's for sure...unless you want to be redoing again down the road... Thumbs Up!
@flcollins Жыл бұрын
Another great video. Giving me the courage to fix the rust in my bus.
@kurthansen570 Жыл бұрын
Thanks for the quick update. Will follow future developments closely as I’m hooked already 😊
@mully89 Жыл бұрын
Great work, I have to do many of the same repairs so thanks for sharing 👍
@davidklauer3422 Жыл бұрын
Good work Gotta get you up to 500k like the surfer dude from HI
@Vangabonders Жыл бұрын
I wouldn’t mine that haha
@oliverengel6791 Жыл бұрын
Fantastische Arbeit 👍👍
@Teddy-vv9iz Жыл бұрын
I started with Brandon's Bus and love it. I just found your channel and after watching 👀 the first video on yesterday I'm a new subscriber. I love hands on metal fabrication and, the skilled people that do it with passion. I will be watching your previous videos, and new ones whenever you drop them. Thanks for sharing 👍.
@dekenshonestattempt968 Жыл бұрын
“Where is tangies soul?” 😂 love it! Great episode, I really enjoyed this! Keep the vibe going.
@Vangabonders Жыл бұрын
Glad you enjoyed!
@levainqueur9095 Жыл бұрын
Quality job. Don't feed the rust, feed the algorithm.
@darylpeekay Жыл бұрын
Love your work. It is so easy to watch and is very informative.
@Vangabonders Жыл бұрын
Thank you so much!
@andrewwardrobe925 Жыл бұрын
Loving the series so far, very informative
@ignacioanaya3403 Жыл бұрын
Cool
@bobmcelvogue8133 Жыл бұрын
Awesome job. I’m literally a month or two behind you. I have to do around the torsion tube repair first then the back end and the valance, rear quarters. I’m in the uk and we can’t get that naval jelly rust treatment, but really enjoying your approach and it’s always comforting when someone else is doing the same. Keep going it’s great. 👍
@JankyTinTopCamper Жыл бұрын
Really exciting to see the rust almost gone and look forward to seeing the plans you have for the rest of the bus. Inspirational as always. Just wish it weren’t so damn hot here in Florida and could work on mine more.
@jeremykonnerth933511 ай бұрын
Leaving a comment to help the algorithm
@brilog69 Жыл бұрын
Working hard man! I dig your energy level!!
@JamesBond-op3ce Жыл бұрын
👍👍nice job 🤔🤔
@ronin97 Жыл бұрын
The endless rust💥
@georgeclements2742 Жыл бұрын
Super work, as always. Completely agree about removing all the rust before fixing new panels. Do a thorough job once rather than a poor job over and over.
@The35speedster Жыл бұрын
Sand blaster. Use it
@arnietwo11 Жыл бұрын
That Q panel is looking similar to my one, im just working on, but i bought the cheaper smaller rear panel and cut it to shape under the indicator/ lights lens !!
@Vangabonders Жыл бұрын
The smaller repair piece is made for the early bays correct?
@arnietwo11 Жыл бұрын
@@Vangabonders yes, but vw parts claim its for all T2s, but as the rear light cluster is differant it doesnt fit, but i cut around and made it fit !! So more work but cheaper !!
@vwbus72 Жыл бұрын
Balance. Huh news to me.
@frednetherlands887 Жыл бұрын
Like!
@AMLagonda Жыл бұрын
Great work once again, but it seems strange that you dont just cut it all out at the same time and then Navel jelly it... 🤔
@kennethsouthard604210 ай бұрын
I believe the VAL in valence is pronounced like Valerie or Valley.
@AlbieSol560 Жыл бұрын
Great work ! I’ll subscribe and definitely watch your progress on the bus.
@ekate7 Жыл бұрын
Hey, I just found your channel 😊 I also have bus, mine is from 1978. and in need of restoration, but we drive it like it is for now... I was wondering are you going to film electricity setup so we can follow up? 😅 Keep up the good work, you have a new subscriber 😊 Greetings from Croatia.
@rickkoshak4919 Жыл бұрын
👍
@SanDiego_VDubLife Жыл бұрын
For the algorithm. 😁
@steveranson15476 ай бұрын
What tool are you using to take weld down before sanding finished repair?
@doctorsatansrobot Жыл бұрын
It rhymes with balance like the comment says... think 'valens' not 'valarns' Unless you also say 'balarns' :D
@Vangabonders Жыл бұрын
😂 I finally understand
@robj270410 ай бұрын
Searched "valance" pronunciation and it depends on your language as, over the centuries, word pronunciation evolves.
@claudehutchings2171 Жыл бұрын
👍👍
@AaronCalcagno Жыл бұрын
and well
@mahirzuko11 ай бұрын
What mixture do you use for welding ? CO2 or Argon + CO2 ?
@Vangabonders11 ай бұрын
Argon and co2 mix
@mahirzuko11 ай бұрын
@Vangabonders thank you, Its quite expensive here about 90$ just to fill it up. Will go with co2 for now
@mcmotors100 Жыл бұрын
Great video! yesterday was very entertaining, kept me up way too late😂, I’m guessing your battery died just before you got home. Love your fabrication, but I’m slightly concerned that the mud flap is too long??? And its defo at the wrong angle (easy fix) ❤️
@Vangabonders Жыл бұрын
It is at the wrong angle, the passenger side was the same way. Once I put the corner into place I simply bent it to the correct shape and it looks great! My battery did die yesterday, glad you joined us on the adventure
@mcmotors100 Жыл бұрын
@@Vangabonders Me too. Also meant to say is it worth/possible to get a panel cut of that inner arch and splice it in. I saw an episode of your vlog where Russ’s engine blew up and there was a chopped up bus at the garage, just a thought.
@katrienmeekers6744 Жыл бұрын
Comment,!
@michaelkennedy9507 Жыл бұрын
Algorithm
@tomchi17 Жыл бұрын
Your original pronunciation of valence is correct. Don't believe everything on KZfaq.