I know this is old but still valid. I watched your videos and ended up with the Ryobi 1800, Uber Flex hose, McKillans gun, and the 2.5 GPM nozzles, and the disconnects. I enjoyed washing my car today. Thanks to you, I have a good enough low cost garage pressure washer setup. Very happy with my setup now. Coming from a gas 3200 psi ryobi pressure washer. Thanks for the info!!!!

I'm new to car detailing. I'm becoming almost obsessed with it. I really enjoy your videos. Super informative, with no fluff. You, Tesla, and Pan the organizer are my go to's. Thank you for such great content and advice

Just purchased a whole setup thanks to all of your detailed videos! Everything just arrived today. I’m not achieving the same amount of foam that you are. I was really hoping for more. Any helpful tips are much appreciated. I’ll list my specs below Ryobi 1800 psi 1.2 gpm washer 30’ Uber flex hose Mjjc s v3 (1.1 orifices installed) Mr pink soap (3oz, the rest water) 50’ 5/8 flexzilla garden hose Using water from the tap outside Quick connects for everything Appreciate any insight!

After my car was swirl marked to hell at the local wash, enough is enough. Going to start buying everything and learn as I go. This channel has great recommendations, thanks for all the info!

I've owned this power washer it seems like 5 years now power washing driveways fences houses honestly I expected it to give up the first year and I still would have been satisfied with the amount of work that it completed however she sits in my garage with her plastic completely faded showing the hours she has on the job and still not missing one beat.

Just got the Ryobi 1800psi pressure washer and the MJJC (from your website) and switched out to the 1.1 which was included in box. I also bought the 2.5 orfice via your link which assuming watching your video gave me 1050psi at about 1.4ish (safe for cars). I also used MR PINK and WOOOOOOOOW and my 2021 Challenger GT AWD was covered in FOAM like a Buffalo NY winter morning. Works great. ordered the quick connencts and waiting for them as well. Thanks for the advice 🤘🏻

I received my pressure washer kzfaq.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP over the weekend and decided to wait for the sun to come out before firing it up. Was needed to clean the deck. Our last pressure washer broke a couple of seasons ago, and I just hadn't replaced it yet. This one had great comments, so here we are. It was easy to assemble, and the trigger wand is comfortable and easy to hold for long periods of time. The pressure washer worked great and made quick work of the "TN North side algae" that inevitably grows every year. I also washed all of the deck furniture while I was at it... it all looks great! So far I am happy with this purchase. I plan to climb the ladder to wash siding over the next couple of days, will update if I have anything else to add after that!

Looked everywhere to figure out the size of the pressure washer hose for this unit and you're the first one to say it's standard 14mm even the manual didn't say and I didn't wanna order a new hose and it not fit so thank you! Also amazing video perfect details not to long and no bs fluff

This guy is amazingly knowledgable and articulate and those attributes add a lot of credibility to his recommendations. I trust what he says!

One of the most thorough reviews I've seen of any product. Really impressed, Josh!

I just purchased this Ryobi 1800 psi pressure washer based off this review. I didn't realize how tiny it was until I opened the box. I just used it today and so far I really like it. HOWEVER, I can easily see how the longer hose will be beneficial. So, I am going to get the Uberflex and the 2.5 nozzles that are both linked above in this video. I was also surprised by how quiet this unit was. I was using my neighbor's gas powered pressure washer but I like this Ryobi much better. Sure, it is NOT nearly as powerful as the gas powered washer but this little unit meets and exceeds my needs for washing cars and hosing off my cool deck and sidewalks.

I bought this little guy about a week ago and for the price, you cannot beat it! It took about 10 minutes to assemble and about 1 minute to hook up some water and start washing. I'm new to power washing things around the house and I wanted something easy and portable to clean my siding, deck, and a stone slab - and this thing is it. Needless to say, it tackled them all flawlessly with the default attachments. In regards to the slab - I actually didn't have time to finish it, but I knocked out a corner just to test and I'm very happy with the results.. I'm actually looking forward to this coming weekend to finish the whole slab.

I have the version with the black housing. I had bought a Greenworks electric pressure washer from Lowes when my gas-powered unit went in for repair. The GreenWorks lasted about 4 months.. the pump seals went ( a light mist at first to a full-blown failure). I saw the Ryobi on sale for $80 at the "big orange box" and said "why not"? It works like a champ. I did save the framework that the Greenworks unit came on, I am making a small shelf to put the Ryobi on to make it easier to wheel around.

Just got this and love it. Use it with my foam cannon and couldnt be happier. $110 at home depot cant beat it

Decided to purchase this unit because of your extremely informative video. Josh, this thing is AMAZING! THANK YOU FOR YOUR PHENOMENAL CONTENT!

Thank you for this video I really appreciate it. I actually just purchased mine for 99$ at Home Depot and this video helped out with that decision. Amazing content keep it up!!!

I've been using this Pressure washer for the last few months ever since watching this video, I got mine off Amazon and is different color, this color is a Home Depot exclusive. It's been amazing and hasn't given me a bit of trouble. The turbo nozzle never gets used, the standard tips are perfect for car detailing and washing. I converted the gun over to a Ridge Washer snubby gun and it works perfectly. The standard handle I use with the Ryobi wheeled undercarriage washer however.

Just got mine from home depot last weekend. Ordered the Uber flex hose in the stub gun and extensions from Harbor freight. The combo is wonderful works awesome. Highly recommended by several detailers in youtube videos

Watched your review and bought it yesterday and loved it! It does amazing and get the job done 😎 After watching your content and buying things based off your reviews, I can trust your input because it’s honest.

I’ve had this one for a year or so and love it, no issues whatsoever.

I just wanted to express my gratitude for your helpful guidance in helping me set up my home car washing system. Thanks to your advice, I was able to make informed decisions on each component and spend money where it was necessary while saving money where possible. I decided to invest in the Griots "Boss" foam cannon and was impressed by the quality of foam and how it dispersed itself. I also picked the McKillan stubby gun and upgraded to quick connects, as you suggested. This left me with the task of finding a pressure washer to use solely for this purpose. After watching a video, I was confident that the Ryobi 1800 would be perfect for my needs. I bought a set with openings of .025 after understanding the tips and flow rates. With this setup, I was able to achieve excellent foam and an outstanding rinse with the 25-degree tip. In the end, I was able to create a system that fit my requirements and cost less than $250.00 for the entire setup. Thank you once again for your invaluable assistance.

Thank you Josh for everything. I watch your videos all the time and I learn so much from you. 🙏

Picked this up the other day and just used it for the first time today, and the gun broke. Took it apart to see if it was repairable, but it split where the plastic was fused together. Guess I'll be upgrading that like you suggested. 😁

I have the 2300 greenworks electric works great but the stalling at first sucks & lack of space I just got this 1800 for $75.. excited to try it out for detailing

Josh, thanks for your advice.. picked up one of these and its flat out fantastic.. quiet and does the job nicely with the uber flex hose and stubby gun and ryobi 15 degree nozzle... I use a spot free rinse tank and its a joy to wash my car again.. next up the MJJC foam cannon.. Cant wait! Thanks again!

Not a professional detailer...just my personal vehicles. I opted for the Ryobi about a month ago and so far very pleased. I did scrap the included bits and pieces and went with a MacKillans foam cannon with swivel handle and an aftermarket flexible hose. I did need an adapter to convert the Ryobi 'out' nipple to accept the standard hose fitting size but other than that, nothing else. I just couldn't see spend hundreds for a washer, or $1000+ for a Kranzle for my limited use. This little thing works just fine for my intended use.

You literally blew my eyes out in the 1st 5 minutes with all these focuses

Honestly i love ryobi and thankfully i have never had them break on me for basic home stuff. Some small car stuff and what not. Love the video. thanks for the info!

So I just bought this the other day. Perfect timing. Definitely will be upgrading too. Thanks!

Home Depot currently has this unit online for $89..without the soap cannon accessory.

Just got mines for Father’s Day! Thanks for the detailed info! Just gotta get all the extra parts you recommended.

Great video and great review. That pressure looks like a fantastic value. Please keep the videos coming

New to car detailing and quickly became obsessed with it just picked up my first set up based from your reviews so thank you . Don’t really know which nozzles are good when detailing .

Thank you for the wonderful reviews and suggestions. I just bought this on sale at HD for $99, plus got an extra $25 off for applying for and using their HD CC. You said you were going to link a video for a cheaper Foam Canon Video, but I don't see it. Please respond here with a link to that video. Again, thank you for the great content. It's been so educational for a newbie like me. I was even quoting your content and showing your videos to the HD guys that were helping me. Lol.

Yeah I actually bought a big gas engine powered pressure washer and then literally the first and only time that I ever used it the dang hose touched the hot muffler and sprung a leak but then I managed to grab one of these Ryobi electric washers and I haven't even considered using that bug cumbersome and labor intensive gas washer since! I absolutely love this little thing for washing my motorcycle, quads, boats, my house and driveway it does it all and does it quite well too! All in the size of a standard car battery it is a no brainer, very highly recommended

It works well. A little pressure washing experience and a lot of old equipment goes a long way though. Good luck to all the newbies

Thank you for always creating this kind of videos

I just purchased one Saturday and the foam did just as you showed so I ordered the mjjc foam cannon wish I did move so fast would have purchased from you. I will be ordering from your website very informative. 10⭐️

Thank you for this video, I have been looking to start a little power washing business doing car but couldn’t find the right one, when I found this video I instantly fell in love with the PW, thank you.

Glad to see the little better quality hose! Great review 👏!

So which Ryobi would you recommend, the 1600, 1800, 1900 or 2000? Or the Dewalt 2100? I don’t mind the budget, I want it for mobile detailing.

I just finished watching your video and ordered that exact configuration from the get go, the Ryobi washer, uberflex hose and Mjjc cannon, cant wait to try it

Hey! Came across your video when doing research bought the pressure washer and now I’m back here looking at the links! And subscribed to your emails - love the content! Can’t wait to browse the website also thank you!!

Nice pressure washer and great review, thanks Josh 👍😁

Your review helped me choose this power washer for cleaning . It's been great. Thanks 👍

2.5 orifice is the preferred choice at 1050psi for this pressure washer. Gives you the most gpm @ 1.43gpm. (His preference is 1000-1200psi for detailing cars)

I think this might be the unit for me. Going to start a garbage can cleaning company soon. Also man you are super good at what you do. Your knowledge and expertise shines through on all of your videos. Keep killing it

Thanks for the review, I am picking one up tomorrow. can't wait to try it.

So we have brands like Ryobi that advertises the actual working pressure and GPM, but Active VE52 advertises a PSI way higher than their working PSI (1800 vs 1100). The whole industry needs some consistency in how they report numbers.

Hey thanks man! What a great review. You explained everything that we need to know about this product and some other options too. Again thank you!

Super thorough and detailed review. Thanks! I'm going to pick one of these up tomorrow. Will look into other foam cannon options and possibly a longer hose after I start using it some

Incredibly good youtuber / reviewer. You could review elephant feces, and I would be glued to the video, and learn absolutely every detail about elephant poop that I never wanted to know.

I have this pressure washer. Its pretty awesome. Took off years worth of shit on my vinyl siding. Its a little slower going since you need to be very close to the siding with the tip to get the deepest cleaning, - but this machine is so small, so convenient, and so easy to use - theres really NOTHING to not like. I bought the entire set of quick connects and a cheap $25 stubby wand - its perfect. I have a big gas John Deere pressure washer and I’d rather use this. Who wants to listen to that gas one running, and i can walk away from this without worrying about anything for as long as I need or want to.

I just bought this after my green works finally died on me. Actually found a black max branded hose that is black but clearly has the “Uber flex” copyright markings along the hose. Saved a few bucks

Thanks for the suggestions !!!

Glad to see yours makes the same high-pitch noise mine does. Safe to say I will be switching to another model

You can get that plus the surface cleaning for $120 online at home depot

Josh I agree with gpm rinses off more than psi. But what about if your mobile on gravity wouldn’t it be the other way around as water is limited. I guess you can always ask the customer to use their water if you have that option if your tank gets too low. But the professional thing is to try to have enough water to complete the job

So I'm only going to use this for car washing, because I have a much bigger gas powered pressure washer for other things around the house. I just needed something easier to grab and able to not tear up a car. I'm a little concerned about the GPM but if you think putting that bigger. Orifice will give me enough GPM to rinse off the car, then I would get this. Just really nervous about that.

Just fyi those "soap blasters" that these come with are meant more for things like washing a driveway or your house. So you can put some driveway cleaner or house wash solution into the little blaster and have a water/soap mix that you can squirt on things before rinsing with the regular nozzles or turbo nozzle.

Just got one at Home Depot for 100$🤙🏼🤙🏼

I ordered one of these today. Due to be delivered in 2 days. I like the new gray color better than the Ryobi green on the earlier model.

Guys. I just picked one of these units up at Home Depot after my Active unit gave up the ghost one MONTH after the warrantee expired. . The outer layer on the hose that comes with the unit TORE the first time I used it. FYI.

Not big into car detailing. Looking for a quality pressure washer for my bike and truck.. Subscribed just because of the quality of the video. Keep up the good work man!

Thank you!!!! AC roof cooling fins! Unit over 30 years old! GETTLE made in Phoenix AZ. Long out of business. they made a DAMMED ac unit. 30 years old! Cools great! AC lied to me! replace the unit??? Watching your Your KZfaq! Went up on the roof! Spray bottle of soap and garden hose! Unit has improved! Bought online Home Depot. AC LYING to me all along. Not once did any of them say the fins were dirty!!!!! If you can pass this on?

Not gonna lie - based on this review, I bought one of these today

Using my unit for the 1st time tomorrow. Let's goooo

I came here to watch how this machine use to work cause recently I did returned to store one to get a refund for burn motor. I did used it just twice in les than a month. I was so trusted in Rioby tools but now I`m gonna think it twice before buy. The pressure washer works great the times I did use it. until stop working and smell like burned out. I leaves this comment just to a advise and put a warranty if you planning to buy one.

Hi Josh. Thanks for all of the pressure washer reviews you do. So incredibly helpful. Have you ever reviewed (or would you consider reviewing) the Worx Hydro Shot?

The Ryobi 1800 is on sale at Home Depot for $99 now (was $159 a few weeks ago). Saw them at the front of the store along with other sale items.

Thank you for the great info and testing, big help for me to buy my first Water pressure.

I was thinking of buying this for some mold and dirt on my house not my car. Didn't hear any mention about using if for the house or sidewalks. I don't care about the 1600 only the review on the 1800 that the video was titled. I can wash my car without a power washer. Thanks.

Informative and honest review. Good stuff! Thanks man!

VERY IMPRESSED WITH MINE. USED DIFFERENT TIPS. WORKS GREAT FOR MY PURPOSES.

Great review Josh. Enjoy your channel. Can you recommend a long wash wand to replace the one that comes with unit.

Which would you recommend,I'll be using it for car washing,but which one you think would be best,the $100-1600/$160-1800 or the $200- 2000,maybe the 2000psi with the 2.5 or 3. Tips to keep the psi a little better?

How do you think 3/8" diameter 50ft hose would change the psi and gpm? Also which would you pick, Active 2.0 or this? Obviously there's a price difference as Active 2.0 is $350 and this is on sale at home Depot for $99. Is the extra gpm in the Active 2.0 worth the extra cost?

Thank you For this useful video review Quick useful info Much appreciated. One of the better vids on yt

Dude, I put your video on 1.5x and by the end my anxiety was off the roof. Fml 🤣

Pressure, flow rate, and orifice size are all related. If you have two of the three variables you should be able to find the third. It looks like Ryobi did their rating with the 1.7 orifice.

Ok, every product works good the first day that you buy it, and so far I have been very disappointed with Ryobi products, every thing I have bought from Ryobi has failed during the start of the 2nd year. My Ryobi screw gun failed at the beginning of the 2nd year, but the gun I bought afterwards a Black and Decker Quantum Hammer gun (same price as my Ryobi) is still working after 18 years, only thing wrong with the Black and Decker is it is a Beast for weight. So last year I bought a Skill, which is powerful but don't have the hammer feature, but I like the quick change feature for bits just push them in until you feel the click no need to tighten the bit in nice light gun. Now the 2nd thing I bought from Ryobi was a weed whacker with attachment feature, Used it twice and then the gas motor failed, so from what I see Ryobi sells you cheap junk, I don't even want to talk about their Table Saws, ever watch a blade come flying out (the shaft broke) I have, Now after reviewing this do you think this will hold up as long as my Harbor Freight Pressure washer 1200 psi ($39.95) it finally started acting up this year, I bought it in 1995, still works but I turn it on and have to take off the pressure hose for the pressure motor to start then screw on the pressure hose used it almost every year to clean the driveways, house and even used it to dig the trenches for piping for a water pipe (8 inches deep and about 48 ft. long) so we could have a front yard water hose. Now one good thing about Ryobi that I found out, after your screw gun breaks don't throw out the charger or batteries, I am still using them today, I soldered on some wire with quick connects and use them for my Black and Decker weed wackers but really would of enjoyed using the different attachments.

Impressive foam for a lower powered pressure washer.

USE on AC coils!! MY AC was Freezing up! Coils were dirty from 30 years of Arizona dust!!! I got on the roof! At my age, not so smart. But AC charged a service charge! Years of money wasted on lies! It was just dirt in the fins!!! Thank you! tell others it cleans AC fins GREAT! "O" let me say, a Stainless steel dog brush will clean and straighten those aluminum fins.

FYI - That 2.5 nozzle did hit 1100 PSI after a few seconds pressurized.

SO, Im just cleaning trash cans (not household bins, the big ones the city collects from your house every week). I've watched several of your videos, maybe 2 hours worth. And my conclusion is MAYBE I can get an electric pressure washer for under $100 and invest in a high quality foam cannon, like this MJJC foam cannon pro for $70 , instead of buying a $400 pressure washer. AND typically a $400 pressure washer is going to come with WAY more PSI than I need and will blow trash cans across the street. Let me know your feedback bout this approach!

Just bought this pressure washer from homedepot for $89 with veteran discount.

So between the Ryobi 1800 or 1900 which one do you prefer for washing cars. Like you vids. I’ve already got the spray wand and foam cannon along with the Uber flex hose. Now I’m looking for the best pressure washer for doing cars. I have a large gas pressure washer but looking for something a little more portable.

IMJOSHV aka “The Pressure Washer Whisperer”

Note to self: Use 25° 2.5 orifice on the first effort Find start point at 10:37

Pan recommended your site. Looking at this same pressure washer. Thanks for the review. Will be ordering a foam cannon soon.

I bought one of those little Craftsman suitcase pressure washers 1800s first one started leaking took it back to Lowe's second one lasted about a month and started leaking now I just picked up this Ryobi at Home Depot for $99 see how long it lasts

Really enjoyed the video. Great review. Appreciate your time. You gained another subscriber...

Keep up the quality reviews!!! 🏆

amazing video Josh bro, thanks for sharing the knowledge .

Great video and appreciate you sharing the information!

Got this at a swap meet a good find for 48$ came complete with foam blaster lol wow

I purchased the Flexilla hose as recommended for this same pressure washer but it did not maintain the same GPM or pressure as the original Ryobi hose. The 50' was too much for the pressure washer.

I have this exact pressure washer and Uberflex hose but how can I connect them both to a 3/8” Cox Reel hose reel??? This seems like such an obvious question that nobody can answer! Help? 😩

Would you recommend this one over the 1600? Great vid bro!

Wondering if you have reviewed any under carriage tools or have tips and tricks for us DIY guys. Enjoying the videos. Thanks, Al from Indiana