Ryobi 18V One Gallon Sprayer TeeJet Mod P2810 P2830

Рет қаралды 17,240

2 жыл бұрын

See below for part descriptions and additional information. I discuss how to mod the Ryobi one and two gallon sprayers to fit TeeJet nozzles. The four gallon backpack sprayers have a different nozzle design from the factory.
Credit goes to the folks over at The Lawn Forum:
thelawnforum.com/viewtopic.ph...
Parts List:
M14 x 1.5mm to 3/8" NPT Brass Adapter
my4sons.com/collections/adapt...
Chapin 6-8148 Replacement Elbow Kit
chapinmfg.com/products/chapin...
TeeJet XR11004VS
www.amazon.com/TeeJet-XR11004...

Пікірлер: 32

@kelvinmartinez5569 Жыл бұрын

Amazing! I wanted to upgrade mine for some time and didn't know how, this definietly will be a great addition to those DIY Lawn Care. FYI, they do sell all of the items you listed on amazon for those who are international or in Canada. I can provide what I found if needed.

@hart316 Жыл бұрын

Please do.. can’t find the brass adapter

@jonathanmcleod5174 11 ай бұрын

I followed the instructions and it worked perfectly! Thanks for the video!

@steffen707- Жыл бұрын

great video, thanks! would never have figured the M14x1.5mm threading of the ryobi wand.

@MrErpman 6 ай бұрын

I made this mod and use it for my yard. Works well.

@Kris-xw4ns 11 ай бұрын

Thank you for your video. This is what I was looking for.

@user-xr8cg6dv8u Жыл бұрын

Thanks for spreading the word.

@tziboy80 2 жыл бұрын

Thank you for making this video.

@TheRFreyre 2 жыл бұрын

Thank you much for this video. I almost bought the parts from the wrong places and much more expensive. You should add the links to where these pieces can be bought.

@Driver732 2 жыл бұрын

Links to parts have been added to video description, thanks for the feedback!

@peupeuguy310 Жыл бұрын

Exactly what o was looking for , thnks!!

@lichee12 2 жыл бұрын

thanks for the detailed parts list and installation guide.

@Driver732 2 жыл бұрын

you are welcome, but real credit goes out to the folks over at The Lawn Forum. :)

@asderik Жыл бұрын

Thank yoooooooo!

@blinkishmixpix 2 жыл бұрын

Good video. I purchased all the parts but was getting a few leaks when testing. I might go back & add some plumbers tape, see if it helps. Thanks!

@Driver732 2 жыл бұрын

Glad it helped

@imatrampoline 4 ай бұрын

Can you put a whole new lance, including trigger on it? Do you need to cut the hose for that?

@blenderbenderguy Жыл бұрын

I've had 5 of these sprayers over the last 2 years. Two of them provided free from Ryobi due to warranty claims. I've given up on these sprayers. When they work they're great, but I haven't had a single one last more than a season. I judiciously rinse after each use and I'm not spraying anything exotic or harsh. The pumps just give out. I tore 2 apart to find them fully corroded. And I can't figure out why that is. I'm done with them.

@MrErpman Жыл бұрын

I've been using 1 for the last 4 years to spray fertilizers, insecticides, and weed killers. One thing I always do is rinse out the bucket and then spray plain water for about a minute. Still has about 80% of the vertical it had when new.

@_1ben Жыл бұрын

Thank you for your comment, I was apprehensive, and your review has me keeping the hand pump

@providentpathfinders219 11 ай бұрын

i seasonally take the rubber pump parts out, clean them, and silicone spray them then reassemble with a light coat of vasoline.

@Andrico77 Жыл бұрын

Hi im trying to find the part (M14 x 1.5mm to 3/8" NPT Brass Adapter) in canada but the link you provided (thanks BTW) charges 35$ for shipping for a 2.99 part. Do you happen to have the part number ..?

@unpavedexplorer338 Жыл бұрын

Hello, I am considering buying this sprayer and want to make the upgrade to the fan spray tip too. Do you recommend this and are you still using it currently?

@Kris-xw4ns 11 ай бұрын

I have 2 of the 2 gallon Ryobi sprayers and love them. I use one for my vegetable and plants and the other for my lawn. They are lightweight and manageable. The fan tip is awesome for my plants but it needs to be modified for lawn chemical application to avoid drift. I may buy these parts or this other piece I found on Amazon that may work.

@shreyaroraa2234 2 жыл бұрын

How fast you are able to empty the gallon tank with this setup?

@Driver732 2 жыл бұрын

It's funny, I just tested this today to prepare for pre emergent spraying tomorrow. I did a bucket test and it takes about 8 minutes to empty a gallon. Hope this helps!

@Driver732 2 жыл бұрын

@@-37driver Yes, the pumps on these small Ryobi sprayers aren't very powerful. Pretty sure I saw other people documenting the slow flow rate online somewhere. Hope this helps!

@-37driver 2 жыл бұрын

@@Driver732 Totally helped. Not the right sprayer for me, thanks for the info.

@stevetran2161 2 жыл бұрын

@@Driver732 would you please put the links where I can bought this modified nozzle kits. Thanks in advance.

@Driver732 2 жыл бұрын

@@stevetran2161 links are in the video description