Ryobi Door Hinge Kit Rocks

Рет қаралды 852,358

Jon Hughes

6 жыл бұрын

I Love this tool, it has everything you need, including the router bit, it is super simple, engineered VERY well....

Пікірлер: 378

@JackSpicer-mi2jj 2 ай бұрын

Thanks!

@Jonehughes 2 ай бұрын

Thank you so much Jack really appreciate the gift 💖

@babyduckmilitia2186 2 жыл бұрын

I watched this video, leaning on the aisle at home depot. I'm going to buy it now.

@lowlifebj4279 2 жыл бұрын

NOBODY FUCKING ASKED BABY DUCK

@jessetaub7458 2 жыл бұрын

Lmao - great comment

@RichiRothschild 2 жыл бұрын

Amazing.. Who would have thought it would be possible 50 years ago.. smartphones with Internet ans vid tutorials on demand 🤣

@DatAtlDevilDawg 2 жыл бұрын

Doing the EXACT SAME THING! 🤣

@nahshondavenport2726 2 жыл бұрын

Same lol

@keza41 3 жыл бұрын

Excellent YouTubing, no music, no big intro just straight into it with no fuss.

@Clifford270 3 жыл бұрын

No kidding. Too many people start out their videos with the top priority of self-worship. Then they get to the content. Great instructional video. Helped me alot. Thanks!

@tomcarberry4445 3 жыл бұрын

Agreed, when they start the long intro, I’m out. The router motor is perfect music to me%

@rothwegk 2 жыл бұрын

Isn't this the truth.

@TheGaryRz 2 жыл бұрын

Not a second longer than it needed to be and still showed me all I needed to see. Great job.

@bossyb5414 Жыл бұрын

Same here lol

@eduardomelgar3534 Жыл бұрын

His wife whispering to him in the video is gold love the way the game has changed we all work with our wives now !

@pd417 3 жыл бұрын

Just hung 10 interior doors and used this jig. Perfect hinge placement, alignment and depth every time.

@danrook5757 2 жыл бұрын

How long in time did it take u

@pd417 2 жыл бұрын

@@danrook5757 Two hinge mortises took me about 5 min. per door. Best $25 investment I made.

@mattneff1262 2 жыл бұрын

Good demonstration!! Its nice to see jigs that don't cost a small fortune and produce quality results. Favorite part of the video was when you made the router sound with your voice...

@charlesriva3678 11 ай бұрын

great job my friend, and congrats to your wife helping you

@kikoman1647 Жыл бұрын

Hey Jon, great video with no BS. Just straight to the point. Job well done. Thanks!

@prestonrau8467 3 жыл бұрын

This just made my decision to buy the router and kit a lot easier. Thank you!

@websurfer1585 4 жыл бұрын

Nice tool and great job, i so want this tool, fitting doors using chisels is a real pain, and takes ages too.

@kkgibbs1 3 жыл бұрын

I bought this for $25 at Home Depot and it worked great. It made easy work of it.

@susancade2092 Жыл бұрын

Oh my goodness where was this template last night when I needed one?! It literally took most of my day to chisel to the correct size and depth for two hinges to hang my bathroom door!! Geez! I am heading to HD to purchase one! Thanks for sharing this very informative video. 👍

@serafinarecalcitrant3869 5 жыл бұрын

Fantastic video. I watched this video 3x. You make it clear and understandable in a very short amount of time. I am about to go and use it on my new door. Wish me luck. Thank you. Hugs, Kiki

@tomjimenez1881 4 жыл бұрын

How did your door turn out?

@timothytarango1919 5 жыл бұрын

Thats cool nice demonstration I'm buying it I need to change all my door. Thanks bro

@stormman8393 2 ай бұрын

Great video. Glad to see your good lady wife there for support

@abdulshaikh9802 4 жыл бұрын

Thanks to you and your helper . Made my life a lot easier

@RCALivingStereo Жыл бұрын

John I been looking for exactly this tool Thank you! So easy

@derrickdamewood2596 3 жыл бұрын

What an insightful video! Great job 👏!

@TheBLACKMQQN Жыл бұрын

Thank you to you and your assistant sir. People helping people.

@stampton 6 жыл бұрын

"Dead Nuts" is one of my favorite sayings... Thanks for the video

@andrewaustman1830 4 жыл бұрын

Steven Hampton classic carpentry term 👌

@alfredneuman6488 3 жыл бұрын

Right up there with 'numb nuts".

@barryinn1778 4 жыл бұрын

I love the black shoes and red shoe strings!

@matthewbaier766 Жыл бұрын

First time I installed a door it took me three weeks with a chisel…I had no idea what I was doing. I’m gonna use this lol

@martinw0574 2 жыл бұрын

Great video Jon well explained I did love the sound affects as an added extra.

@rafaeldelgado4985 3 жыл бұрын

Cool, I like those red laces also nice.

@soukyphetsinor2716 3 жыл бұрын

wow that's awesome, goin to be replacing all my doors n was wondering how to do the hinge cut off n this here answered my question. thnx for the video

@docmacg6315 3 жыл бұрын

Thanks fir the demonstration. I was wondering about this tool.

@NY_Concrete_Jungle 3 жыл бұрын

Great straight to the point video!! Thanks!

@She_Tried_It 11 ай бұрын

LOVE this!!! My doors are on the way. I'm making sure I get what I need to mortise the hinge space. I plan to lay the existing door next to new door and mark. I can't wait! But all this for a minute 30 seconds of work is sort of a let down.😢 I'm gonna be asking people if they need a door installed! Sad they charge $100+ for door installation...

@patlsmith404 3 жыл бұрын

Have to get one for sure! Thanks!👍🏼

@Hajjat 2 жыл бұрын

This is great! I spent an hour last night installing two hinges (15 mins each one)🤧… Gonna order this for my next home project!

@hjmilla Ай бұрын

Better than me…it took me almost a whole day to chisel for my hinges 🤦🏼‍♀️

@Hajjat Ай бұрын

@@hjmilla Haha crazy how much time it takes! My expectation at the start of the project would be a few minutes but usually end up spending the whole day and night working on it lol

@hjmilla Ай бұрын

Yes…always just need a few more days 😆

@mineadventures7938 2 жыл бұрын

Nice job Jon-very helpful.

@jimmyatnip2510 5 жыл бұрын

I suggest that you place the router into jig BEFORE YOU TURN THE ROUTER ON. Also, turn the router OFF and wait until the router stops before you remove it. The Jig is made of plastic and a turning bit could damage the Jig.

@fortheloveofcards8266 3 жыл бұрын

This was a great video... Nice detail.. Thank you

@kzfingerprint 3 жыл бұрын

This was very helpful!!! Thank you so much!

@rockypettyjohn1144 3 жыл бұрын

I have enjoyed using this tool.

@Marcosjafco 3 жыл бұрын

Very well done Sir. Thanks for sharing

@johnjohn-ne8fw 4 жыл бұрын

Nice helpful details that others miss

@wrealestate8778 4 жыл бұрын

Thank you Sir. Great tutorial

@snakefinger Жыл бұрын

I just picked one up. Thank You !

@scottduckworth7042 2 жыл бұрын

You sound like Andy Reid the Kansas City Chiefs head coach. Great video, well explained.

@Jamie-gw3hj 2 жыл бұрын

I was thinking Norm Macdonald

@Mounty621 Жыл бұрын

Bought one. Great tool!

@Cadetcaptainok962 3 жыл бұрын

Thanks for the help Mom.

@zmezgar2387 3 ай бұрын

You just gave me hope. I was about to pay someone to come do this

@kurtgoodwin9490 Ай бұрын

Clear, quick and tro the point. good video thanks

@libork8106 2 жыл бұрын

Great, I was wondering how good really the fixture is. Thank you.

@guerrokingpep 4 жыл бұрын

Awesome video. Thank you

@z._axz 3 жыл бұрын

Awesome job.

@markbarber1920 3 жыл бұрын

I have the exact same set up, I can verify that it works great!

@sergioomar9090 2 жыл бұрын

Beautiful!👍👍thank you!

@pheidosify 3 жыл бұрын

George Carlin really knows his shit ... ✋

@richardrinn1522 2 жыл бұрын

Thanks this help me install 2 doors. Love when he makes the router noise. Bisssss!

@stuartnicholas572 4 жыл бұрын

does it only do one size of leaf hinge, 3" hinge has a smaller leaf on it

@frankrodriguez8520 Жыл бұрын

Thanks for this video 🙏🏻❤️

@indychuckluck 2 жыл бұрын

Thank you, great work

@jamesschmid5612 3 жыл бұрын

Wow, so clean! Hey say hi to your mom for me.

@ogatkinson6274 6 жыл бұрын

good job

@calvinroberts1445 5 жыл бұрын

Hey Jon, Good quick demo of the tool. Came across your video looking for the one to create the jamb template. Hope you are doing well. Calvin

@Jonehughes 4 жыл бұрын

I love you man But you ain't getting my Bud Light kzfaq.info/get/bejne/js2cpMhjus6ufXk.html

@jesussilva3616 Жыл бұрын

Great 👍🏽 video

@B15SDMDESIGNS 3 жыл бұрын

I would always set the router before turning on. Last thing you want is to catch the jig and render it useless

@christopherd7922 4 жыл бұрын

Great video Ty. I’ll definitely be buying one. I’m replacing 14 doors in my house. I’m also removing the kids bifold doors in there rooms and putting two 2’ doors. What do you suggest to route out the hinges on the jamb with?

@Jonehughes 4 жыл бұрын

You can make one in about an hour If you don't want to do that, you can always go buy one for a few dollars also..

@Jonehughes 4 жыл бұрын

Find the best deal on one like this one here thebuilderssupply.com/templaco-351-3-12-14-radius-corner-hinge-template?gclid=CjwKCAjwh472BRAGEiwAvHVfGrBEPI6BrTr_6qTxKETf5f7AwCgR4AgOWOeUyOneUimyIf7GtMzWgBoCDV0QAvD_BwE

@elpasoerickp 3 ай бұрын

My neighbor uses the chisel. I was hoping he had cordless gear. But his work was amazing. I bought the jig and the router without a battery. I have so many other great ryobi tools.

@Jonehughes 3 ай бұрын

We all use a chisel whenever necessary Same as we all use an ax whenever necessary But I'd rather use a chainsaw And a router When appropriate 💖

@KElliottism 4 жыл бұрын

Thank you!

@somedude0505 3 жыл бұрын

Im replacing all of my interior doors, 9 total. I did one yesterday and cut the hinge slots with a chisel. I do not want to do that again. Im defenitely getting this jig. Thank you!!!!

@jlowe600 3 жыл бұрын

I'm about to do the same and was planning on chiseling, How did it work out after 9 doors?

@somedude0505 3 жыл бұрын

@@jlowe600 it was a good investment. I would say that if you plan on doing more than 3 doors, just get the jig and a cheap router from harbor freight or walmart, if you dont alrrady have one. It will save you time and frustration. The cuts are very smoth making it a profesional looking job.

@New-Breed-Drywall-And-Paint Жыл бұрын

Does to work on the door jam as welll?

@KagakuGakusei 2 жыл бұрын

Damn I am picking this up tomorrow

@GotchaplumberGotchahvac 3 жыл бұрын

Good video!

@brenttucker166 4 жыл бұрын

Has anyone ever told you that you sound like Andy Reid the Headcoach lol

@joycehoffman182 3 жыл бұрын

That is scary...

@tbeatty785 2 жыл бұрын

Maybe I have a faulty temperate, but tightening down the clamp enough to where it won’t shift around pulls the temperate towards you, throwing off the measurement. I learned that the hard way on the first door we hung.

@Jonehughes 2 жыл бұрын

Yeah take it back and get a new one there must be something wrong unless you're doing something wrong because it works perfectly fine without over tightening it which is what you had to do

@eduardoguitian955 Жыл бұрын

Very helpful video.. it saved me $350

@elletasner2158 Жыл бұрын

Thank you for explaining

@dennisharris-5p1cae14 2 жыл бұрын

Which bit did you use with your router? Did you have to adjust the router depth as well?

@Jonehughes 2 жыл бұрын

The bit comes with the kit Where is a depth gauge on the side of the unit

@DragonflyAcres2022 2 жыл бұрын

Awesome video.God Bless

@user-xr1zl3dg4g Жыл бұрын

DEAD NUTS!!!! Thanks Jon!

@banderson924 4 жыл бұрын

What about cutting the door jamb? Does this tool recess the hinge on the jamb too?

@Jonehughes 4 жыл бұрын

thebuilderssupply.com/templaco-351-3-12-14-radius-corner-hinge-template

@kimchee94112 3 жыл бұрын

That's great for the doors how about the jam side when you need to do it?

@Jonehughes 3 жыл бұрын

www.dkhardware.com/6-foot-8-inch-full-length-template-for-three-1-4-radius-3-1-2-hinges-35368-product-479469.html?gclid=CjwKCAjwtNf6BRAwEiwAkt6UQgk8rEfW6yCcZD2vdLcGSrLax_0DT3gUIbJPNV4S5DY-looXQr8qoxoCMJEQAvD_BwE

@lindabloomfield2262 4 жыл бұрын

I have hinges that are square corners... does it work with square corners?

@lindabloomfield2262 4 жыл бұрын

I just relies it does.

@rothwegk 2 жыл бұрын

Great video, and ryobi is kicking ass. My work truck is slowly turning from yellow to green.. Haha

@treymarrs6860 3 жыл бұрын

I gotta get one!

@dillwiggle2 5 жыл бұрын

I want to cut the hinge part on the door jamb side (making my own jamb) not on the door itself. What is the best way to do this ?

@darrenr1194 4 жыл бұрын

skill

@beedee9534 4 жыл бұрын

@@darrenr1194 Pray

@Jonehughes 3 жыл бұрын

@patcollins8747 3 жыл бұрын

How do you rout out the frame?

@joelrusk6412 Жыл бұрын

Bump. Lol

@lurochannel 4 жыл бұрын

80 thumbs downs??? What? Great video my friend

@AbelieverofourLord 5 жыл бұрын

Thanks

@kamchiu8996 3 жыл бұрын

good video, nice team up with wife. Happy wife happy life.

@stevecurry2651 2 жыл бұрын

Good video kinda funny hearing you get after your mom 🤣😂🤣😂

@1PITIFULDUDE 3 жыл бұрын

damn KZfaq, now I know about this tool I've got to have.

@peterfitzpatrick7032 3 жыл бұрын

Just make one... look on youtube... 🙄😂

@whatthe2458 2 жыл бұрын

Show me how to measure for hinge placement. Nice video.

@Sarahofelt 4 жыл бұрын

Did you get the router and the kit as one package or did you have to buy it separately?

@Jonehughes 4 жыл бұрын

Routers completely separate

@Sarahofelt 4 жыл бұрын

Jon Hughes thank you

@johnzarollin2749 2 жыл бұрын

what router bit was included for the 1/4 round hinge edges?

@Jonehughes 2 жыл бұрын

The kit comes with a Bit

@johnallen6591 9 ай бұрын

Thanks pal.

@victormalgieri7733 3 жыл бұрын

The particular hinge that he was using is referred to as a 5/8 radius

@bobadams3661 3 жыл бұрын

And the other type radius is 1/4"

@hectorcalderon3011 3 жыл бұрын

Thanks for sharing

@davidd5712 3 ай бұрын

Thanks I have 7 doors to hang and I was wondering if this would be a good tool Seems to work good

@Jonehughes 3 ай бұрын

This tool totally rocks I just did three more doors yesterday This thing pays for itself the first time out After that it's all gravy

@505fastlife6 Жыл бұрын

Stupid question how do you know where to notch out are all doors standard? Also would this work with any router or just the Ryobi.?

@Jonehughes Жыл бұрын

Any router And if you're starting from scratch just measure any door you're near to get the measurements for where you want to put the hinges

@joedejesus6363 3 жыл бұрын

Thanks for sharing this video and giving us a step by step "Tutorial" Can you do the door studs with that tool as well?

@Jonehughes 3 жыл бұрын

No I like Templaco, but you can use cheaper ones To accomplish the same thing www.dkhardware.com/6-foot-8-inch-full-length-template-for-three-1-4-radius-3-1-2-hinges-35368-product-479469.html?gclid=CjwKCAjwtNf6BRAwEiwAkt6UQgk8rEfW6yCcZD2vdLcGSrLax_0DT3gUIbJPNV4S5DY-looXQr8qoxoCMJEQAvD_BwE

@Jonehughes 3 жыл бұрын

www.acehardware.com/departments/tools/power-tool-accessories/router-accessories/20579?store=07367&gclid=CjwKCAjwtNf6BRAwEiwAkt6UQkSjaRrbLZJVBg-Xi4s0mJdeePwI44Eml6Cg20gVJjuzpY3Y14cHrhoCxfoQAvD_BwE&gclsrc=aw.ds

@the-bu3lb Жыл бұрын

How do I know we’re to make the cut on the door for the hinges? Also what about the frame the mount on how’s that done because the frame isn’t the same as a door.

@Jonehughes Жыл бұрын

If it's a door that has no hinges already installed if it's just a blank jamb and a blank door just measure an existing door and match that There are many templates for the jamb templaco makes a good one

@TheTeknoroker 3 жыл бұрын

What size router bitbdo you suggest? Love the video!

@Jonehughes 3 жыл бұрын

The kit comes with one But it is a quarter inch drive with a half inch bit

@Jonehughes 3 жыл бұрын

Your friend has shared a link to a Home Depot product they think you would be interested in seeing: RYOBI Door Hinge Template www.homedepot.com/p/RYOBI-Door-Hinge-Template-A99HT3/312284029

@fireblaster9961 5 жыл бұрын

BIG BANG BOOM

@DJiMike1 4 жыл бұрын

brendan ford “ohhhhhhh.”

@titsmcgee7874 2 жыл бұрын

You rock

@darkknight4539 2 ай бұрын

Does this work on the door frame for cutting the hinge mortises for the frame?

@Jonehughes 2 ай бұрын

Google" Templaco door jig" They have every jig on the planet

@tigereye1208 5 жыл бұрын

Very good. Square hinges would need the corners chiseled out right?

@Jonehughes 5 жыл бұрын

Barely.....but yes 😃

@Joe-fo3fg 5 жыл бұрын

No, the black plastic curved corners can be removed, reversed and put back in for rectangle hinges.

@grahamh1067 5 жыл бұрын

@@Joe-fo3fg you still need to chisel out a small amount, as the router bit wont make a perfectly square corner, but the template gets you close.

@christopherd7922 4 жыл бұрын

That kind of sucks IMO that you have to chisel out a little for square hinges. I’m contemplating buying this jig, but when I found out that it doesn’t totally route them out perfectly square I’m looking for a different option. If anyone can recommend a jig that will cut out a square hinge without not having to use a chisel please let me know. I have 18 doors to do. Ty