I use the Ryobi Bi-Metal Door Lock Installation kit (model# A99DLK4) To Install Keyless Electronic Door Locks at the "Handyman Special" house. Quick Product review and used product to install the new locks.
Пікірлер: 35
@muffinpuppy0897 жыл бұрын
Hey, Rob, I'm pretty sure you needed to rotate the latch barrel for it to move towards the hinge side of your hole so that the entire lock mechanism was more centered in the hole. That's why part of the hole is still exposed in the interior of the lock.
@robsgaragewoodworkin7 жыл бұрын
I had to move it over to clear the door frame and also to attempt to line it up with the existing door handle. Got it moved a bit but yes it was designed to fit in the other setting but I needed to modify this one a bit so it would function. I will be replacing this whole door as it is not quite "proper". Good Eye! Cheers! Rob
@BronxLockPicker60Rodriguez5 жыл бұрын
Sir, you did an excellent job my friend! Thank you for sharing.
@robsgaragewoodworkin5 жыл бұрын
Thanks!
@shadowbanned51644 жыл бұрын
Good video Im really liking the keyless lock you installed.
@robsgaragewoodworkin4 жыл бұрын
I LOVE them! I installed 3. Front and back of the house and 1 on the shop. Thanks for your comment! Cheers! Rob
@lynnerobinsonschollkopf8100 Жыл бұрын
Thank you great video
@ninjastriker31397 жыл бұрын
Great video. Thanks a lot.
@robsgaragewoodworkin7 жыл бұрын
You're welcome! Thanks for the feedback! Cheers! Rob
@henbiton66545 жыл бұрын
Hey Rob! I don't know if its still relevant or not, but I just had to tell you [or the future viewers ] how to do it right: Basically, you did everything good, except of one part - you didn't adjust the core of the deadbolt (the one that has the bolt in it) - it has to be adjusted to the right backset length! I'll explain : there are 2 common backset lengths when installing a lock. You did right by checking and aligning the deadbolt position according to the door knob beneath that. The thing is that you adjusted the right backset length only with the position of the lock on the door, but you didn't adjust it on the lock itself (the core connects between the lock and the frame basically). Very easy fix! just disassemble the lock again, take the core piece out, with a screw driver turn the "+" sign (it could be a different shape but its the same) until the bolt is out. then, depends on the lock type, you will see how to turn it to the right back-set (most of the time by twisting the entire core). its hard to explain it so just take a look on that quick video that I found that shows just that: kzfaq.info/get/bejne/hslna8SXkqu-o3k.html Good luck!
@robsgaragewoodworkin5 жыл бұрын
Neat! I'm not sure that mine was adjustable because it's an electronic lock but I will check. Cheers! Rob
@MarbledPaladin4 жыл бұрын
@@robsgaragewoodworkin Was it adjustable? I know what the other poster refers to but I am not sure from looking at the video if yours was adjustable...
@robsgaragewoodworkin4 жыл бұрын
@@MarbledPaladin I'm not sure. Too late now
@Trainman04017 жыл бұрын
Rob, thanks for the video. One question....the hole you drilled for the lock appeared to be larger than what was needed. The cover provided on the inside of the door did not completely hide the hole you drilled. Yes/No? BTW....Happy New Year!
@robsgaragewoodworkin7 жыл бұрын
There are two lengths of door barrel so you can drill the same size hole in two different locations. The current handle was in the other location. I tried to keep line them up as much as possible by pulling this lockset in line with the handle. I made it about 1/2 way so the handle and lock set are not obviously out of alignment. The hole size for the handle is actually standard but there are two possible hole locations to chose from depending on the barrel length stated on the lockset or handle set. Good attention to detail. Happy New Year to you too! Cheers! Rob
@RoomiesGarage7 жыл бұрын
pretty cool tool.....
@robsgaragewoodworkin7 жыл бұрын
Yeah it was virtually the same price as the hole saws. Worked well! Cheers! Rob
@duncan3597 жыл бұрын
is that door metal on the outsides and wood inside?
@robsgaragewoodworkin7 жыл бұрын
The steel residential doors have a rectangular wood frame around the outside of the door then styrofoam in the centre all clad in a steel skin.
@dano40037 жыл бұрын
Rob, great video, but you need to get a mic, you(we) lose a lot of your voice...
@robsgaragewoodworkin7 жыл бұрын
You are absolutely right. I have needed some better A/V equipment for awhile. Problem is they are difficult to find. I have ordered a set of wireless headphones with a mic for my new iPhone and a camera mount. I'm hoping that will work. Eagerly waiting for the package to arrive... Cheers! Rob
@DigitalAndYaleSolutions7 жыл бұрын
hizo una perforación a 7 cm y la cerradura estaba ajustada a 6cm .
@robsgaragewoodworkin7 жыл бұрын
I was trying to line the lock up with the existing door handle as much as possible so it didn't look bad. The handle and the door lock had two different barrel lengths. I didn't want to lock to look off centre so I moved it over a bit so it wasn't so obvious.
@christopherlopez93163 жыл бұрын
Which screws size?
@robsgaragewoodworkin3 жыл бұрын
I used the hardware that came with the lock set.
@chaplieval7 жыл бұрын
Молотком можно открыть такой замок.
@robsgaragewoodworkin7 жыл бұрын
It's pretty easy to get into a house if you really want to. The dog is a good back up though... Cheers! Rob
@juliusvalentinas6 жыл бұрын
If somebody spills something over the buttons and damages it, or smashes it with a hammer, superglue anyone? how are you going to get inside yourself?
@robsgaragewoodworkin6 жыл бұрын
Spills are fine, after all, it's a lock on the outside of your house exposed to the weather. You can damage any lockset with a hammer or superglue. Locks only keep honest people out and only slow down criminals. Cheers! Rob
@juliusvalentinas6 жыл бұрын
Locks should not stop police, FBI, etc. If your locks keeps honest people out you will have no friends then.
@youarehere12514 жыл бұрын
If I really want to get inside the house, I don’t have to mess with the locks at all.
@DigitalAndYaleSolutions7 жыл бұрын
mala intalacion quedo el hueco descentrado
@robsgaragewoodworkin7 жыл бұрын
I was trying to line the lock up with the existing door handle as much as possible so it didn't look bad. The handle and the door lock had two different barrel lengths. I didn't want to lock to look off centre so I moved it over a bit so it wasn't so obvious.