Very useful review .... your experience with foam canons allowed you to give this product a good baseline to perform to. It gave us, the viewers, a good foundation to learn from. Thanks for sharing your experience, I for one learned quite a lot about this product. Cheers, dave (BTW ... I'm an old Alfa driver from the early 70's ... I drove an Alfetta GT and '73 Spider, last of the mechanical fuel injection, and to be honest, miss them immensely. ) Love your Alfa ... it's a beauty!!!

Nice review Phil. Thanks for posting. I do like that for blasting some soap onto siding on a house or cleaning off the driveway with a degreaser, cleaning outdoor furniture or something like that while you are pressure washing. Looks like it would be great for that use. It does look pretty solidly built. I like that size reservoir because I only need a small amount of foam/soap for my Nissan 370Z. I currently use the BOSS Foam Cannon which I love because I can just hook up the product bottles right to the foam cannon itself and use as much or as little product as I need to use.

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzfaq.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

Answered my question, thanks.

Exactly the type of review I was looking for on this. A comparison to real foam cannons, and whether or not it can be hacked.

I used it with my Gas powered Pressure washer, it's made for that It was working great on my Bike They make two different ones One is for the Gas powered Pressure washer and the other one is for electric powered one Great review

Really great !

That must be a smaller office, that might explain that extra velocity. Now for spraying the roof it looks solid

Say less! That Griot is insane…sold! ❤

I used the Foam Blaster on a concrete wall and adjusted the nozzle to obtain the desired density and it worked very well. I didn't see you use any adjustments, it might have changed your opinion.

I have the same foam blaster and I use the Ryobi 1800 psi I have no issues that thing throws so much foam it’s not even funny it might be the soap you were using I have no issues works fantastic

Ordered the griots thanks

I actually like that runny foam sometimes on super dirty cars. Help lift and remove mud easier than thick foam

Love your videos! Does your wife ever get jealous? 🤣

This is a good product for what it is for which is getting distance on the foam when blasting the house to get the siding 20 feet up. It can be used for the avg joe to work on the car and stuff, but it really works great for cleaning the house.

I had no idea that ryobi had something like this on offer :]

It would be perfect to use for the wheels. Soap up the wheels and rinse off without changing adapters. Thanks for the video

Why did you skip the most important part. Hooking it up to the power washer?

Seems like this product is geared more towards home use such as getting soap on house siding, concrete cleaning etc with the level of pressure coming out. Also with the rinse switch it will allow homeowners to rinse chemical off of a house or large area.

Solo yeah baby!

Can we plug it into a regular garden hose ? What connector do I need to use 😢 mine has threads on the inside

I have the older Ryobi 2,000 PSI 1.2 GPM Electric Pressure Washer that has the water/soap tank on the bottom. Would what you just demonstrated work with my pressure washer? I was thinking the smaller soap cup on this might be easier than wasting filling up the large tank

Read on the forums only 2003 QV's have been sold in the US since 2017 just a fyi.

What kind of distance you get with it? Just picked up a Ryobi 2300psi electric washer, and one of the planned hobs is cleaning the vinyl siding on my 2 story house.

Love the Alfa.

I actually like mine w ryobi 1900psi electric washer, your going to use a meguiars wash pad anyway so whats the difference in foam thickness, the productis still breaking down the dirt as it sits there?

Maybe when you do these foam cannon reviews you should use something like the ryobi 1600 psi 1.2 gpm or the 1700psi 1.2 gpm greenworks pressure washer for testing and for the people who have lower psi and gpm pressure washers and the ones with the higher psi an gpm you could use the one you have

Which pressure washer are you using and do you recommend it or a different pressure washer? I like the foam cannon you used in the GT350R video, I think it’s the one in the like in your description here. Thanks👍👍👍

I want something I can spray soap at high pressure like at the car wash..what product does that?

Can this work with a garden hose?

Beatiful alfa

would be great for cleaning asphalt shingle roof with Dawn and Vinegar

Your foam cannon is impressive. How much is due to the product (soap)? Try the Ryobi with 100% soap.

You could probably use the ryobi for the salt dissolver or see how far the pressure washer can spray ky jelly

nice reveiw!!sometime...SHOW YER FACE....LOL

An independent Alfa specialist in the UK is saying they have seen a lot of Quadrifoglio's with failed fuel pumps, saying there is an updated version. Something to look out for.

Love it!! Says polycarbonate is going to shatter if dropped. It's the same material that bulletproof glass is made from. Polycarb is EXTREMELY tough. I work with it all the time.

I got this 10 years ago and its not comparable to a PF22 or Griot's BOSS. Its weak. Always enjoy your videos, keep it up.

Would work great for cleaning car floor mats or boat carpet, where the higher psi is needed.

Good for a APC rinse???

Yea this would be great for a prewash. I would load it apc do the wheels and pre wash

i tried the roybi soap foam cause i didnt wanna go all way across town to get the real stuff, and accidently found out its a damn good wheel cleaner cause it ate up caked on brake dust with minimal scrubbing lol

This week I purchased the Ryobi 1900 PSI pressure washer. I'm glad I got that one. It works really well. My driveway looks brand new. What I would like to find is a good soap that I can use in a foam jet. I would like to find some that will put a heavy coat of foam and remove all the road grime. At work I used to use some on my company car. It was made by Champion Paper Company. They would mix 3 5 gallon containers in a 500 gallon vessel and fill with water. I think the water pressure from that pump was over 3,000 PSI. It really did a great job with cold water.

I use auto soaps that are not meant for a foam cannon. I use the Royobi Blaster to shoot the soap and loosen up surface dirt then I wash by hand and use it to rinse. It just saves me from having to switch up equipment…

I would use that on pavers to clean . I like to power wash my lanai every. now and again

so much pressure through that you probably barely have to contact wash if you get a little closer lol😅😅😅

Its supposed to be more like what you would experience at a public car wash.

Have you tried any of the chem x products, stars n stripes etc ???

I think it blasts off the dirt, while putting on the soap!

Try turning the nozzle

I had one paired with my Hyper Though pw (1,600 psi/1.2 gpm) and I threw in the woods. Brilliant finish foam cannon and MJJC are the way to go if you have low end pressure washer

Would it be possible to attach the ryobi foam blaster to a regular hose? Maybe with some adapter?

Where did you purchase your rotors from I have a 2018 stevio

Yea i just got one of these, to go on my 1900 psi electric pressure washer. Shit is literally a cannon, barely any spread just direct, it works if i stand 20 ft away lmfao

Can you use any foam cannon to attach to the ryobi?

What pressure washer are you using in the video?

GPM minimum to get that amount of foam with the griots foam cannon?

Are you still selling those Alfa Alcantara steering wheel covers

How about less warm water more soap

Why didn't you show how you changed the PSI?

Thank you for this. I’ll stick with my Chemical Guys foam cannon.

At the beginning you twisted the nozzle like it was adjustable but when you used it you didn’t show how adjusting it changed anything.

What pressure washer you use ?

I wonder if I can use dawn soap ?

I already crack the ryobi

Anyone notice the wing mirror lights coming on after spraying in the vent 👀😆

I have one and use it with my electric ryobi pressure washer to wash our cars. It sputters a bit and is overall just kind of underwhelming.

The denser foam slid off faster

turn the blue part of it

I used it and killed it. Lol, I think I used to much soap then water and it just stopped working. Took it apart and put it back together. Tried it and the soap portion will not work. I got maybe 6 car washes out of it. It was good while it worked.

I have 4000 psi power washer with no regulator

Thats a hose end sprayer

I don't get it....everyone's bashing it and it looks to me like it works great..covers the car with soap in seconds,what more do you want?seems perfect for washing a car and it's the same as a spray it yourself car wash.so it don't cake the shit on there so what why is that necessary?

“Soap cannon”

you have to open it

Would be nice if someone uses this to actually clean a dirty car.. 😂😂😂

??? I think this is an unfair review. I just bought one and using my honda 1200 psi pressure washer and it shot thick foam.

I had this unit..Wasting a lot of soap

Lol keep it Phil get your money 💰 back

You used it wrong lmaoo have to twist the cannon sideways. That way the inner peace opens up to throw more foam..

I use it for mine, just blast it on and hand wash it and wash off

Those are absolute junk! You can’t replace the orifice or whatever it used. I use it to spray cleaners on my siding so I don’t contaminate my vehicle cannons with siding chemicals. I figured I had already spent the money on it anyway.

It's just a pressure washer with soap in it...not a FOAM cannon.

It sux and doesn’t work hardly at all with the ryobi electric pressure washer. If you turn the nozzle it will shoot like a fire hose.

I think your being polite, it’s crap.

Adam mega foam is better

Seems like ryobi foamer is a trash! More water than water! Gonna spend less on the others than Ryobi!!

Another gimmick not a one solution for all no matter how you sell it and the reservoir ..thimble. Stick to a tried and tested unit and not everyone uses a 16 - 1800psi unit with a low gpm

Nope. That thing is junk. I returned mine.

Nothing I would buy. It seems like a waste of soap falling onto the ground.

Holy sh*t that foam cannon sucks

Why buying these garbage having a foam cannon

I wouldn’t waste my money or anyones money on that piece of crap

Stop working after 1 use, horrible product