I am really getting a lot of good tips and tricks and really appreciate it. Learning as I go, I thought I was nuts seeing the movement and need for a lot of readjustments. But your break down is exceptional. And I really dig that you show "mistakes" as you go. Thanks for sharing that knowledge.
@gripthumb44863 жыл бұрын
Please Please Please Please keep making 150 videos , when i first bought my press there was no videos out on it, this has helped so much thank you!!
@Ryonet3 жыл бұрын
Absolutely, and thanks for reaching out! We are currently working away on content. Anything in particular you'd like to see more on?
@gripthumb44863 жыл бұрын
@@Ryonet hmmm this is kind of a hard one now because this answered so many of my questions. Maybe platen upgrades and bracket placement. Recently got a 18x18, 18x20, 20x20. Would love to know how to make the most of those with my 150.
@HelmetVanga Жыл бұрын
I am impressed with his patience and dedication to the trade. Having said that, I am convinced we need a rock star engineer who can design a machine with one try registration. Technology has to move on for the better and easier to set things up.
@Ryonet Жыл бұрын
Not bad points, progress is a necessity. We're grateful for our rockstar designers and operators making magic happen over here!
@MrXrayPL3 жыл бұрын
Man your tutorials are awesome! Big thanks for that. I'm so eager to do my next prints. Stay in a good health!
@KittyJ302 жыл бұрын
I have to rewatch this every time I'm printing. Registration is the biggest struggle!
@Ryonet2 жыл бұрын
Good morning, @KittyJ30! I get it! Keep it up. You got this!
@JohnEastmanExAttyAtLaw5 ай бұрын
Just far too much work without micros and this guy is a professional. To upgrade this press with micros costs more than the press itself.
@Ryonet5 ай бұрын
You don't upgrade this press to micros, if you're looking for a press with micro registration, check out the Riley 250: www.screenprinting.com/products/riley-hopkins-250-4-color-1-station-screen-printing-press-with-xy-micro-registration
@JohnEastmanExAttyAtLaw5 ай бұрын
the 250 is cool but nobody would buy it if the 150 had micros. i think the company knows this as well. the 150 used to have micros. there are plenty of people on here showing theirs when it did.@@Ryonet
@JohnEastmanExAttyAtLaw5 ай бұрын
also, I just spoke with someone from Ryonet. they can't even recommend buying this thing. now that is sad. they said to buy the 250 because getting this thing in registration would be hell. which it is. how about just giving people what they want to buy if they are willing to pay for it? nobody even really wants the 250. i read all the forums.@@Ryonet
@jaredbrown16623 жыл бұрын
Aaahhhrrrrggg!!!! Lube that flash unit swing!!!! Lol
@sjm85103 жыл бұрын
Thank you so much for your videos, hope you are in good health.
@ianolson63782 жыл бұрын
Same RH 4/1 Press I’m looking to buy so I’m stoked to see this video tutorial. 💯🤙🏼
@brettbowman23363 ай бұрын
Thank you!!
@leviteapparel3 жыл бұрын
nice work!!!
@marvinquarrie33623 жыл бұрын
Thank you very much this video was so helpful. I am a beginner screen printer.
@HelmetVanga11 ай бұрын
I will do different for the off contact. I will find me an aluminiun frame thin enough to match the off contact. I will put the thin frame under the screen and using a level to make it all level. And do the rest of it same way.
@Ryonet10 ай бұрын
Right on, that sounds perfect!!
@parkercoe37272 жыл бұрын
I’m thinking about getting a Riley press and using it in my mom’s garage, but is there any risk to using it in a hot environment? It’s almost summer time so I’m anticipating the garage to be pretty hot without AC / proper ventilation
@heatherjennings1453 жыл бұрын
Newbie here--one of my favorite videos so far! I have an old Silver Press 4/1 so this was great for me to see. Question about smoothing screen...is it just a regular screen? Is it coated with emulsion?? What is the clear ink you used?? Thank you so much for these videos!
@colinhuggins61643 жыл бұрын
Heather - in the video before this one, where I talk about the art and making screens, I show how to make the smoothing screen. Its simply a coated screen, typically a higher mesh count, that is exposed without any image.
@heatherjennings1453 жыл бұрын
@@colinhuggins6164 Oh very good! I thought I had watched that but must have missed the smoothing screen part. Thank you so much!
@DoRightSbАй бұрын
Nice. Using the 150 right now. I have a 16x16 pallet and my screens are 20x24 does that matter ?
@RyonetАй бұрын
Hey! It doesn't matter as long as you're staying within the limitations of the platen!
@hustlerstudiomfg3 жыл бұрын
I wanna know the most awesome design you made with a 4 color press
@colinhuggins61643 жыл бұрын
I did a lot of awesome Rugby type designs back when I was new in the industry - on an OLD hopkins 4x1 press with WOOD screens. The artist was AMAZING.
@hustlerstudiomfg3 жыл бұрын
colin huggins is it possible to show us?
@colinhuggins61643 жыл бұрын
@@hustlerstudiomfg I have not seen those shirts in.... oh gosh.... this was a LONG time ago... back in 1998 or so.
@hustlerstudiomfg3 жыл бұрын
colin huggins aaah thats to bad i would realy love to see what a 4 color press can do to the max
@natesenft53762 жыл бұрын
kzfaq.info/get/bejne/q8mem5ibmtC-c2Q.html
@graphicart73523 жыл бұрын
I have some questions . What kind of silk holes are used in this experiment? What transparent material did you use on the white color? Thank you very much for this wonderful video
@colinhuggins61643 жыл бұрын
157 thin thread for the white. 230 standard thread for top colors / Any clear ink will work in the smoothing screen.
@graphicart73523 жыл бұрын
@@colinhuggins6164 thank you very much 👍 👌👌
@johnl8052 жыл бұрын
I did the clear tape and got the register and then when I took the tape off it took the underbase with it 😭 What kind of clear tape is it that you used? Can I also do this with a blank transparency sheet?
@Ryonet2 жыл бұрын
Good morning @johnl805! using clear tape to register is a cool old school trick/technique and super helpful. i guess when i do that technique i don't really ever take the tape off in order to print on the base underneath the tape. I just do another test print to confirm i am indeed all lined up. As far as what i use, i use either packing tape or Clear Choice Registration Tape. A blank transparency wouldn't have any adhesive on the back to get it to stick, so i probably wouldn't recommend that. Hope this helps!
@whyfilmworks5184 Жыл бұрын
I believe you should do every test over the registration tape and not over your final underbase print
@laketahoetoursandrentals13523 жыл бұрын
Thanks so much. Great video! Something I’m having trouble with is how long to flash the shirts at 3” high off the shirt?
@graphicart73523 жыл бұрын
I hope you are in good health. There are symptoms of the flu on you.
@colinhuggins61643 жыл бұрын
Wearing a mask keeps moisture in my nose... so it gets a little runny.
@kellenmills66223 жыл бұрын
Good vid thank you
@Ryonet3 жыл бұрын
No problem 👍
@wagyu_killer6 ай бұрын
does the gradient prints always have to be printed wet on wet?
@Ryonet6 ай бұрын
No, it will depend on what inks you're using. Feel free to reach out anytime if you need more support!
@rarebreed9236 Жыл бұрын
Hey I have a question when registering with the 150, I’ve been trying to do a 2 color print, I’ll have the registration right on but then once I lift the screen move it and bring it back it’s off. I’m not sure what’s causing this. I’m new to printing
@Ryonet Жыл бұрын
Hi! There could be several reasons for this. First - lets make sure the screen is not resting on the platen at all - that you have set the print head for proper off contact. The screen should be "floating" above the platen and no part of it should actually touch the platen. Second - lets make sure the nylon bolts are snug (but not too snug!) up against the print arm. Third - is the platen clamp snugged down nice and tight? Does the platen shift? What are you aligning to? Has it moved? If you are still having issues past this - please give us a call and we can go over it with you!
@tlocklie Жыл бұрын
what is the purpose of the smoothing screen
@Ryonet Жыл бұрын
A smoothing screen boosts the vibrancy of the ink and mattes down the fibers of the shirt for a nice smooth print!
@jefflong1799 Жыл бұрын
Soo the smoothing screen has a clear liquid or something? Or No?
@Ryonet Жыл бұрын
Hi Jeff! Yes, you'll want to add a small amount of a base to use as a lubricant for the smoothing screen. Try Clear Core or a Curable Reducer!
@Ryonet Жыл бұрын
Check this out for details! kzfaq.info/get/bejne/mrSIqNJq3qfddp8.html
@jefflong1799 Жыл бұрын
@@Ryonet Will Do Thanks!!
@johnl8052 жыл бұрын
I have this press and I am having issues with my off contact. No matter how I adjust the heads, the screen sits at an extreme angle. Or it just lays on the shirt completely. It takes me an hour and I can still see my underbase even though it is choked. Could that be an issue fixed by readjusting tilt/off contact?
@Ryonet2 жыл бұрын
Hi @johnl805 I responded on your other comment... we can totally get you dialed in. give us a shout. here's the message from the other post.... Good morning @johnl805 ! Yes there is a tilt adjustment and we would be pumped to talk you through how to use it. You can email me directly at jwells@ryonet.com or you can call us at 3605767188. In short if you are looking at the BACK of the screen clamp there are two bolts. This is your off contact which allows for vertical, up and down adjustment. Where the screen clamp attaches to the arm that brings it down there another two bolts. one is basically a pivot point and the other is what locks in place. This is your tilt adjustment. Hope this helps, give us a shout and we can walk you through it.
@onewitharts6 ай бұрын
How do you hang all your screens on the wall?
@Ryonet6 ай бұрын
Thanks for noticing! We actually drilled holes in all the sides and screwed them together so it's a standing wall. You going to try it?
@onewitharts6 ай бұрын
@@Ryonet I'm definitely hesitant to drill into the screens haha, but if I can't come up with a better solution to get them on the walls and ceilings I might have to try it your way
@anthonycantu88799 ай бұрын
I don't know anything about screen printing, and have no real clue about how close the screen should be to the material to be printed on. 1/8 th inch? 1/16 th? Everything will be trial and error, for me, it seems.
@Ryonet9 ай бұрын
It all takes practice but the width of a quarter is a great place to start for off-contact! You should join us for an in-person two day class! scrnprntl.ink/SPE
@johnl8052 жыл бұрын
I noticed you didn’t mix the FN white ink. MY FN white is SUPER thick. Even with mixing it, it doesn’t come out that good on one pass. It’s very uneven. Is it supposed to be this hard to work with?
@Ryonet2 жыл бұрын
hey @johnl805, seems strange. reach out to us and let's see what we can work out. How old is the bucket and where is stored at?
@kingskafa3 жыл бұрын
Wheres the best place to get bulk shirts?
@toz57832 жыл бұрын
How do you get rid of the printed registration markers?
@Ryonet2 жыл бұрын
If you place packing tape on the shirt where the registration marks lie, then you can just wipe off the ink with a rag. I hope that helps!
@freedomphoneteamtraining70003 жыл бұрын
Hi Colin - Im setting up my 250 press and other equipment now. I have an Epson ET-16600 Printer. Originally when I ordered it, the 16500 model was supported by PrintFab. Now it looks as though even that earlier model is not supported. Is there another RIP software or other solution that you could steer me to that would work well for creating Color Separations from Adobe Illustrator? Also - do you think there might be a chance that the ET-16600 will in fact work with AccuRip Emerald or other? I kind of get the feeling that some printers aren't listed on their site because they don't actually have that model in their shop to verify it, or is it more complicated than that. Please let me know your thoughts or anyone else please with input. Thanks!
@Ryonet3 жыл бұрын
The main issue with printers and rip software lately is the lack of availability for the traditional "recommended" printer models. Printer supply chain issues have created a world of hurt for everyone in our industry. My suggestion is to find rip software that is offering you a lot of flexibility but also has clear instructions and recommendations on printers you can use - and that are available. Those list are growing everyday as the rip companies test more and more printers.
@kaylachermolololo64013 жыл бұрын
I have a couple questions if you could answer please! 1. Can i cure with a flash dryer? 2. If i can , how long do i flash the shirt for if the flash dryer im using is 2000 watts and is fixed at 400 C
@colinhuggins61643 жыл бұрын
Hi Kayla. Yes, you can cure any ink with a flash dryer. We do have a couple of videos that you can watch that will walk you through the process. We also have plans for an updated video on curing ink. As for how long to flash with your flash unit - flash long enough, so the ink is dry to the touch and not sticky. No One can give you an exact time for this. It is dependent on how warm your ink is, your ink deposit thickness, how warm your platens are, the ink itself, and how far your flash is above your platen. 1 inch off will flash faster than 4 inches off.
@kaylachermolololo64013 жыл бұрын
colin huggins one more question if you dont mind is an white underbase only Used on black shirts? Ill watch some videos and see what else i can learn
@colinhuggins61643 жыл бұрын
@@kaylachermolololo6401 the first reason to use an underbase is: A white underbase is used whenever you need the colors of your design to look like they do in the bucket. Say, you print yellow on a royal blue shirt... that yellow is going to tint towards a green shade. If you put white down first, that blocks the blue of the shirt and allows the yellow to remain truer in color. the second reason is: As a way to block dye migration when printing on poly and poly blended garments.
@kaylachermolololo64013 жыл бұрын
@@colinhuggins6164 colin you’re the only one i can relay on lol im having trouble finding any good answers my question is what can i do if i dont have a pressure washer? Well i can get one its just i dont have a water source and cant really spend money on anything like that so is there any alternative?
@colinhuggins61643 жыл бұрын
@@kaylachermolololo6401 oh goodness.... Water is pretty essential as its used as our source for rinsing clean and reclaiming / developing our screens. My thoughts are to create a recirculating system with filters to pull out all the particulate... but it is not going to be cheap... I'm sorry, but I do not have a good answer for you :(
@nett57983 жыл бұрын
Where can I buy this machine. ı am from Turkey
@mariochavez22853 жыл бұрын
Is there any way I could add micro registration on my Hopkins 150 ?
@Ryonet3 жыл бұрын
Hi Mario. Unfortunately there are no upgrade options for the 150 press.
@teesprintandapparel Жыл бұрын
what is a smoothing screen?
@Ryonet Жыл бұрын
Hi! At the 21 minute mark you see a blank screen being used to help smooth out the shirt fibers that are sticking up through the white base. You can see this in use and described better in the video for printing white ink with a smoothing screen: kzfaq.info/get/bejne/mrSIqNJq3qfddp8.html
@teesprintandapparel Жыл бұрын
@@Ryonetthank you! watching again and taking more notes!
@qwesvvs Жыл бұрын
😮
@Ryonet Жыл бұрын
Pretty sweet, right!
@anonymoussupporter77883 жыл бұрын
What Flash are you using? Ryo?
@Ryonet3 жыл бұрын
This is a RyoFlash!
@scooterinvegas13 жыл бұрын
Who's Ronald and why are you using his flash? :-)
@Ryonet3 жыл бұрын
#giveronaldsflashdryerback
@nathanjudds35302 жыл бұрын
@ryonet Can the Riley Hopkins 150 press hold 4 screens that are 23x31?
@Ryonet2 жыл бұрын
Good morning, @Nathan Judds. It will. However, please keep in mind that the pallet it comes with is 16x16. So you may be limited on how large your image can be by pallet size comparative to the screens. you could go with a larger pallet though. Hope that helps.
@nathanjudds35302 жыл бұрын
@@Ryonet That's good news, I will probably pick one of those up! Could someone could make a custom pallet for the press relatively easy?
@ngavaka43862 жыл бұрын
lol, the naked truth is, if you've registered screens over 2 years alone you wouldn't need artwork to register 3 colour design unless its a 6 -8 colour point registration?
@Ryonet2 жыл бұрын
@Nga Vaka, little confused on your statement friend. can you please clarify?
@ArtMonkey51502 жыл бұрын
Seriously... It takes you that long to set up? 👎
@Documentary8120 күн бұрын
It's an instructional video, so it's not meant to be done at 100mph. If he did it at the speed he'd likely do it at when working on his own products, people new to the game would miss the steps. And people like you would then bitch that he's too quick. Sort it out 👎🏻
@REDMoDz103 жыл бұрын
The typical glove microbiologically flow because pail summarily knock inside a wistful authorization. tidy, fine plain
@ArtMonkey51502 жыл бұрын
That press is pure garbage without proper registration ... Waste of money better off with the more expensive Riley presses. This model is crap.
@Ryonet2 жыл бұрын
Hey, What's up, Chuck? Everyone has to start somewhere. Some printers need to start with something like this due to budget or maybe they are just printing on the hobby level. THat's what this press is designed for. Maybe they don't even know if they know if they like screen printing yet. While i agree with you (a little) that i would want to invest a little more for a Riley 300 or 350, that's not everyone's scenario, man. Have a great rest of your week, Chuck. Happy Printing.
@DavidLangkiet3 жыл бұрын
Why does it sound like he's sick in every video????
@colinhuggins61643 жыл бұрын
My nose gets runny when I talk that much. My note to self is to take time for nose care....
@BiznessBoyProductions-FAM3 жыл бұрын
Was thinkin the same thing. Never blows his nose just sniffles throughout the whole thing