How to replace the passenger side cv axle on Ford Escape 2013-2017

  Рет қаралды 41,849

s33therfan

s33therfan

3 жыл бұрын

#ad
cv axle:
amzn.to/3kwfgE1

Пікірлер: 87
@user-pn5gz6lv9h
@user-pn5gz6lv9h 10 ай бұрын
Great video, very helpful and informative. I will be changing my cv axel and will be using your excellent video as my guide. Thanks again.
@s33therfan
@s33therfan 10 ай бұрын
You are welcome!
@josephwagner7012
@josephwagner7012 2 жыл бұрын
One of the best made videos of this type I've ever seen. Good pace of instruction, clear words, GOOD LIGHTING and angles. Well done! Most appreciated!
@s33therfan
@s33therfan 2 жыл бұрын
Thank you for the terrific feedback , it is much appreciated.
@user-om3ce4nu4y
@user-om3ce4nu4y 2 күн бұрын
This is the best instructions video so far I have been watching. 👍
@s33therfan
@s33therfan Күн бұрын
Thank you very much.
@jonathancamardo422
@jonathancamardo422 Жыл бұрын
This was a fantastic video. I have been working on our cars for years. I have watched a bunch of horrible videos that were not very helpful. This was a perfect how to guide. Tips, torque specs, great camera placement. You took some time on detailing this job. Well done and 2 thumbs up. I subscribed.
@s33therfan
@s33therfan Жыл бұрын
Thank you for taking the time to leave such great feedback , much appreciated.
@brandonsamples9248
@brandonsamples9248 Жыл бұрын
This was an awesome video, very few our this thorough 10/10!
@Nick-ro9yp
@Nick-ro9yp 3 жыл бұрын
Thanks for the time and effort to make this video. I recently took my 2017 escape to the shop, and got this repair priced around 500 USD. Definitely think I will do the next replacement, will be re-watching in the future.
@s33therfan
@s33therfan 3 жыл бұрын
Thank you for the great feedback, it is much appreciated.
@SirPoopyPants
@SirPoopyPants 2 жыл бұрын
Just Completed this job on a 2017 Escape. Everything he said is SPOT on. Well done sir. Well done.
@s33therfan
@s33therfan 2 жыл бұрын
I appreciate the great feedback, thank you for watching.
@TiffanysTechniques
@TiffanysTechniques 2 жыл бұрын
Best video of this project. Explains that bracket that held me up. Couldn't figure out why I couldn't get it out.
@s33therfan
@s33therfan 2 жыл бұрын
Thank you for the great feedback , it is much appreciated.
@jstray2321
@jstray2321 Жыл бұрын
Glad I'm not the only one who has trouble with the OEM lugs on this car. They're always a pain in the butt. Finally replaced them with some doorman's hallelujah
@s33therfan
@s33therfan Жыл бұрын
Exactly , that was the best money spent. Thanks for the feedback.
@jxyzbyyy8567
@jxyzbyyy8567 2 жыл бұрын
Thank you for the instruction video. I'm getting ready to replace my passenger side CV axile on my 2013 Escape. Your video gave me so much more confidence. Very well done.
@s33therfan
@s33therfan 2 жыл бұрын
Love to get feedback like this , much appreciated.
@wilmonger1
@wilmonger1 Жыл бұрын
Terrific video. Was able to complete the whole job in 90 mins. Had a rattle ever time I hit a bump due to a bad axle joint. Thanks for the video.
@s33therfan
@s33therfan Жыл бұрын
Nice work! Thank you for the feedback.
@josephhughes514
@josephhughes514 Жыл бұрын
Great video, I used it to replace the LH axle seal on my wife's 2013. It's the same process on the left side, except there is no bracket to hold the axle bearing on the left side. Thank you.
@s33therfan
@s33therfan Жыл бұрын
Thanks for sharing , much appreciated.
@elijahlundberg7934
@elijahlundberg7934 2 жыл бұрын
Very Helpful. Patient instructions are hard to come by these daya. Thank you.
@s33therfan
@s33therfan 2 жыл бұрын
Thank you for the kind words .
@williamhall2403
@williamhall2403 9 ай бұрын
Super Helpful saved alot of time for me just gathering the tools needed for the job. Great Job Great Information
@s33therfan
@s33therfan 9 ай бұрын
Thank you for the excellent feedback.
@Knowna89
@Knowna89 3 жыл бұрын
Bro you are the GOAT 🐐 saved my life
@s33therfan
@s33therfan 3 жыл бұрын
Thank you very much for the terrific feedback , it is much appreciated.
@scottspringer4263
@scottspringer4263 Жыл бұрын
Very nicely done video! Thank you for doing this!
@s33therfan
@s33therfan Жыл бұрын
Thank you very much for watching.
@Rob_1776
@Rob_1776 Жыл бұрын
Getting ready to do both sides of my wifes 2018 escape Good video man!
@s33therfan
@s33therfan Жыл бұрын
Thank you very much.
@Rob_1776
@Rob_1776 Жыл бұрын
@@s33therfan You're welcome! Have a good one
@gonzaloledesma7638
@gonzaloledesma7638 3 жыл бұрын
Best video ever..thanks broo..
@s33therfan
@s33therfan 3 жыл бұрын
Thank you for the amazing feedback, it is much appreciated.
@edwardcoronado1853
@edwardcoronado1853 2 жыл бұрын
Thank you very much this is very helpfull thumbs up
@s33therfan
@s33therfan 2 жыл бұрын
Thank you for the kind words and thanks for watching.
@hussamnoor1901
@hussamnoor1901 2 жыл бұрын
Thanks for ur help ur the best!
@s33therfan
@s33therfan 2 жыл бұрын
I appreciate the terrific feedback, thank you for watching.
@nelsonenaccion4x424
@nelsonenaccion4x424 2 жыл бұрын
Great video slow well xplain details THANKS
@s33therfan
@s33therfan 2 жыл бұрын
Thank you very much for the great feedback.
@mrlowlow514
@mrlowlow514 2 жыл бұрын
This is nice work!
@s33therfan
@s33therfan 2 жыл бұрын
Thank you very much for watching.
@chokedoutlie
@chokedoutlie 9 ай бұрын
Awesome video! Thank you!
@s33therfan
@s33therfan 9 ай бұрын
Glad it helped! Thank you so much.
@stephendelgiorno6434
@stephendelgiorno6434 3 жыл бұрын
Thank you for this video Just had to do a transmission on mine to the tune of 5k , 69 thousand miles, now the axel I cant wait to get rid of this SUV
@s33therfan
@s33therfan 3 жыл бұрын
Thank you for for watching.
@jjjjjj426
@jjjjjj426 2 жыл бұрын
@@s33therfan we change the trans fluid every 7 to 10 k miles
@stevewhitt9109
@stevewhitt9109 5 ай бұрын
Thanks. I have this problem on my 2013 Esc
@s33therfan
@s33therfan 5 ай бұрын
Thank you for watching
@user-py1hx6pi3v
@user-py1hx6pi3v 6 ай бұрын
Very good except you should put loctite on the caliper bracket bolts like they do at the factory.
@GramsRyan
@GramsRyan 3 жыл бұрын
Thanks for making this video, it is precisely what I was looking for. It appears you have a drip-pan underneath. Did you need to drain and/or top-up fluid afterwards?
@s33therfan
@s33therfan 3 жыл бұрын
I did not lose much fluid but usually I like to drain out as much as will drain and refill the exact amount. However if the transmission fluid is clean I would just add back whatever drains out. Thank you for watching.
@arnoldtx1
@arnoldtx1 2 жыл бұрын
Very good video
@s33therfan
@s33therfan 2 жыл бұрын
Thank you
@dustinmacomber4565
@dustinmacomber4565 4 ай бұрын
I don't think you showed how you got that CV joint out of where the rotor is attached to
@kennyscott5251
@kennyscott5251 Ай бұрын
This is a great video but why didn’t you put the same cv axle that you took out instead of a new one? Just asking.
@tylerserrano4979
@tylerserrano4979 2 жыл бұрын
I watched your other video of the driver side replacement cv axle, would that be a good carry over to the driver side of a 2017 Ford Escape? I’m watching both videos multiple times to be prepared regardless. Thank you for your time and knowledge sir!
@s33therfan
@s33therfan 2 жыл бұрын
Yes , it should be the same. What ever amount of tran fluid drains out , replace that amount . Only other tip is to avoid hitting the cv axle seal , and monitor the seal after replacement for any leakage even if replacing with a new one. Thank you for watching.
@SWATT101
@SWATT101 Жыл бұрын
Great vid used it to follow along... Its sorta like wrestling alligators but all good lol...don't pry on the sway bar link...it's a bugger to get back on.
@s33therfan
@s33therfan Жыл бұрын
Thanks for watching.
@dustinmacomber4565
@dustinmacomber4565 4 ай бұрын
Everything was really good I just can't get it out of where the rotor fits into. Does that mean it seized in there? Do I hit it with a hammer? You didn't show how you got it out of that part
@frankturja11
@frankturja11 Жыл бұрын
I have a 2018 ford escape se and I did pull the CV axle out on the front passenger side and on the inner side of the bar had a fitted seal shield on it. The one you pulled out didn't have one. Even the one that was shipped to me didn't have on it. Do I need it? Or do I need to buy another one with that shield on it. Thank
@s33therfan
@s33therfan Жыл бұрын
It is not entirely necessary. I get replacements all the time that don't have these shields. Having said that , I have in the past transferred them over from the old cv axle . Great question and thank you for watching.
@daviddiaz3937
@daviddiaz3937 2 жыл бұрын
Do you know if this will work on an 18” 1.5 escape?
@s33therfan
@s33therfan 2 жыл бұрын
Should be the same . Thanks for watching.
@LiterallyJesusChrist
@LiterallyJesusChrist 3 ай бұрын
Does the seal need changed with the joint? I did mine today and noticed its now leaking where the joint goes in the transmission. Did I damage the seal? I was so careful, I don't see how I damaged it. Is it possible some will leak out just from taking it out without draining the transmission fluid? Thanks!
@s33therfan
@s33therfan 3 ай бұрын
Yes , you may have some drain out when removing it . Just replace what you lost which is probably minimal. Hope this helps.
@LiterallyJesusChrist
@LiterallyJesusChrist 3 ай бұрын
@@s33therfan I noticed just a little bit when actually changing the shaft, after I test drove it about 25 miles, when I got back and parked it, it now appears to have a steady leak. I think I might have ruined the seal. I'm not sure if I can get away with replacing just the seal, or if I need to do the bushing as well. Know of a bushing and seal removal/install kit for a 6F transmission that isn't a million bucks?
@s33therfan
@s33therfan 3 ай бұрын
I would just put another seal in it , I have got most of mine from autozone or oreillys fairly cheap. Just as cheap as online in most cases.
@LiterallyJesusChrist
@LiterallyJesusChrist 3 ай бұрын
@@s33therfan I think I'll start there. I wish I had a tool kit for the bushing and seal. I appreciate your advice and time. Thanks! Gawd, I've had it apart twice already, I hope to heck the 3rd time is a charm!
@kurthack74
@kurthack74 Жыл бұрын
Anyone happen to know if these instructions would be the same with the 2.5L 2WD model?
@s33therfan
@s33therfan Жыл бұрын
It should be almost identical. Thanks for the feedback.
@Sircull121
@Sircull121 2 жыл бұрын
Is this the same for the rear wheel
@s33therfan
@s33therfan Жыл бұрын
The procedure is somewhat the same. Thanks for watching.
@edwincolon4219
@edwincolon4219 3 жыл бұрын
How do you know when it has to be change
@s33therfan
@s33therfan 3 жыл бұрын
Usually the boots start showing signs of dry rot and leakage. Also you might have a popping clicking noise when turning , most noticeable at slow speeds. I have also had severe vibration from bad cv axles. Thanks for watching.
@pablomachucachavez1014
@pablomachucachavez1014 Жыл бұрын
Hi! Any symphtoms of failure?? Thanks!
@s33therfan
@s33therfan Жыл бұрын
You should hear a popping noise when turning like in a parking lot at slow speeds. Thanks for watching.
@pablomachucachavez1014
@pablomachucachavez1014 Жыл бұрын
@@s33therfan thanks
@dustinmacomber4565
@dustinmacomber4565 4 ай бұрын
I went back. I seen you did explain. Sometimes I get seized and what to do. I was wrong. Sorry
@s33therfan
@s33therfan 4 ай бұрын
Glad the video could help , appreciate the feedback.
@talmadgebooty4052
@talmadgebooty4052 2 жыл бұрын
I just paid Ford 700+ to replace CV axle & for some reason they also replaced tie-rod end? Why would they replace a good tie rod ? BTW- they didn't Re-align the front-end. So, it's back at Ford for alignment. Free. As they SHOULD have did alignment after replacing part that wasn't even bad. Ford lost a customer . 60k miles & was getting a little shaking when turning right. Seems a common problem with these cars? Thanks for the great video.
@s33therfan
@s33therfan 2 жыл бұрын
These dealership prices can really add up in a hurry. Not sure why they had to replace both but definitely they should have aligned it before letting the car go. Thanks for sharing and I appreciate the feedback.
@brentacusmaximus6677
@brentacusmaximus6677 3 жыл бұрын
Had my 13 escape up on the 2 post lift today and noticed my driver side fron cv axle has slack INSIDE the trans it literally moves up n down with a redicules amount of slop. Thought it was a bad cv till I took a closer look so.....good job ford your loosing loyal customers with your crap cars. I just replaced a defective pos rear differential BAD from day one from the factory !
@leonardoicandelariojr9090
@leonardoicandelariojr9090 Жыл бұрын
dead blow.
Ford Escape 6F35 Transmission LH Axle Seal Leak Repair
25:37
FordTechMakuloco
Рет қаралды 301 М.
How to Replace the front strut on the Ford Escape 2001 - 2017
12:01
Haynes Manuals
Рет қаралды 44 М.
Scary Teacher 3D Nick Troll Squid Game in Brush Teeth White or Black Challenge #shorts
00:47
ТАМАЕВ УНИЧТОЖИЛ CLS ВЕНГАЛБИ! Конфликт с Ахмедом?!
25:37
Despicable Me Fart Blaster
00:51
_vector_
Рет қаралды 14 МЛН
Why Does My Car Axle Click? Diagnosing and Explaining Axle Noises
9:56
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,5 МЛН
How to Replace Sway Bar Bushings and End Links
9:51
ChrisFix
Рет қаралды 4,1 МЛН
How to replace the drivers side cv axle on a 2013 ford escape
37:04
Wheel bearing replacement on site without dismantling the hub carrier
21:04
Ford Escape 2009 - fallo en flecha delantera y desarmado
5:35
David Rodriguez
Рет қаралды 74 М.
How to Replace the drive axle on the Ford Escape 2001 - 2017
7:09
Haynes Manuals
Рет қаралды 37 М.
2013 Ford Escape AWD Front Axle Fail/Replaced. Easy Fix.
16:09
#duet  гонщиком 340км 1 ч
0:10
Санжар
Рет қаралды 12 М.
Stunt Bike vs Trial Bike 🔥
0:32
Red Bull
Рет қаралды 48 МЛН