Part 2: This video will show the various features of this robot, in action
Part 1 for the building instructions: • CleanSweep: The Floor ...
If this project helped you in some or the other way, you can:
Buy Me a Coffee: ko-fi.com/saiyam
Instagram: / saiyam_rakh
Instructables: instructables.com/member/saiyam
Telegram: t.me/saiyamagrawal
Written step by step instructions on instructables.com, with images: www.instructables.com/id/Clea...
_________________________
CleanSweep is a smartphone controlled robot that cleans your house's floor! The rotating mops on the front of the robot along with a foam roller (used to paint walls, not here) at the back can do the job perfectly. There's also a water pump and water reservoir which can be switched on when required to throw water on the floor and make the mops moist for a proper clean. The foam roller is movable, which means you can lift it when not in use. I've also added speed controls for the driver motors.
The project uses bluetooth communication via an HC-05 bluetooth module to send the commands to the most commonly used microcontroller- Arduino UNO. The robot is powered on a 12V lead acid battery, the ideal voltage for all motors used here.. The driver motor pair are 100rpm ones while for the mops I've used 75rpm plastic ones.
The best part is that the mops used were homemade, from old CDs and rags and they clean just perfectly. This is a smaller version so might not be suitable for a large area. There can be tons of other features added, like making it completely autonomous, which I couldn't due to shortage of time.
It took me around 4-5 days to complete this thing, simultaneously making videos of the process. I hope you like it.
__________________________
Don't forget to Like & Share the video. Subscribe to my channel for more awesome DIY!
Do leave a feedback in the comments section below. Any questions/suggestions are welcome.
You can also drop me an email at: saiyamagr@gmail.com
Thanks for watching! :)
#CleanSweep #FloorCleaningRobot