Be aware of scammers! I just had to remove a bunch of scam comments If you get it right, I will reply to your comment and announce your name on Thursday. We will .make contact after that and I will ship it to you So far no correct guess, but some extremely close ones. If no correct guess, I will choose the closest guess. Good luck, and stay safe from the scammers!

Hey Josh I’m not going to participate in the guessing game I wouldn’t use it much because of the size I just wanted to say you don’t want Home Depot or Lowes they suck too those big box stores killed almost all of the good old hardware stores in our country we still have a good old hardware store a couple towns away that I’ll go to because they have what need and if they don’t they’ll order it for you thanks for making your videos for us

I do own a quick coupler greaser and it works real well. As long as it is properly seated it will not leak or get off. I have bought it from Amazon and it is skinny and fits in all my recessed zerks. And it is mounted on to a flexible line. An absolute investment in my opinion. Well worth the money.

I have been using LockNLube Grease Gun Couplers for years. They work great and I have not had a problem.

I have a lock and lube I have used for several years. Clearance for it can still be an issue. You can install a bleeder o the gun hose after the pump to relieve pressure then the coupler won’t get stuck.

I know this sounds snobby as hell, but once you have used a battery powered grease gun, you will never look back. They are tough as hell, you can even use them for hydroforming. The battery powered caulk gun is a close second. I believe Ryobi makes one that can take grease or caulk. Yeah 60 bucks is hard to stomach for a simple grease gun, but it is so clean, and saves so much waste, I bet it pays itself off in paper towels in 5 years alone. Really a pleasure to use. The one I have is a popular Red Brand and it has a locking cap with a much smaller presentation. It's a series of ball bearings on a sliding collar, much like a pneumatic fitting

I have had the “original” brand of locking tip for the farm. Had them for years, but have the same issue-some zerks are just not accessible with the bigger tip size. My 15’ batwing ditch mower has almost 60 zerks! I have to get the regular gun tip for 4 of them…..

Trust me Lowes and home despot aint no shangri-la either. I've got both and ive had to travel 40 miles to go to a menards to get what I need.

I haven't had a chance to watch your sawmill video yet, as I only found your channel a couple of months back, so I have no idea how many grease nipples there would be. The way our internet is, if it's even working correctly, it limits what we can do. We are still on ADSL 1 with a maximum download speed of 6.5Mb/s and this is Telstra, Australia's best network. And it's been broken for two weeks now and they still haven't fixed it yet! But the coupling looks interesting and that was a straightforward and honest review. All the best from Queensland Australia.

I Have one of these on my grease gun in my shop , I put a grease Zert in a normal size tip and keep it attached to my grease with a string so I don’t have to carry to grease guns. Also have a one shot you use hammer on to clear really stubborn clogged zerts, i t is awesome,, keep up with your videos we enjoy them very much

DEWALT 20V MAX Cordless Grease Gun (DCGG571M1),Yellow,V11 Torque & 20V MAX XR 20V Battery, 5.0-Ah, 2-Pack (DCB205-2) Topper you be very lucky with this grease gun.

I have a very similar brand, they work great but like you said they don’t fit on everything. My guess is 36 fittings. Keep the content coming. Don’t be afraid to do product reviews if it’s something you use and something you believe in.

I’m running a 6’ finishing mower without the belt cover because the access holes through the cover to the three spindles is too small to remove the grease coupler after you’ve finished. It’s easy to push the coupler straight on but, to remove it, you have to tilt the coupler to the side. I just ordered two of these to try. I may end up with two grease guns - one with and one without.

I have the original "Lock and Lube" and it works pretty good it very small and long, I can grease U-Joints with it, but I just bought a new and they don't hold the zerks as good the older version and leaks grease around the zerk. I have two guns setup like you mentioned,

Hi Josh, I am a retired toolmaker in Northern Illinois. I too have my own manual machine shop now, and really enjoy your videos. We have all the box stores down here, but our Menards stores are really good. They are best known for their quality lumber. Home Depot lumber looks like it was cut from a corkscrew tree. A couple years ago, I built a 24 x 32 foot addition for my shop. The lumber was cheap (11% off entire order) and it came out great. Not the best place to buy tools though. I like your homemade sawmill! Keep the videos coming.

I'm a heavy equip. mechanic and I have an Alemlube locking grease coupler, sort of similar to this on my elec grease gun. It is a better, less bulky design, you press down a similar lever and the coupler opens out sort of like 3 hooks which shut when you let the lever go. This design lets you get at recessed fittings and ones with bashguards fitted but it is still long and has the lever making it hard to fit in tight spots. The locking function really saves time when it can get stuck, but you're right they are hard but not always impossible to fit on uni. joints.

26 fittings. I use the " lock and lube" a little smaller but also has some fitment issues. I have 2 short hoses made, 1 with a 90 degree coupler and 1 with a regular coupler. Eliminates the need for another grease gun

It’s good to know that it doesn’t work on recessed fittings. As for the big box stores, the success at keeping the shelves filled is based on the point of sale inventory tracking information that is uploaded to corporate purchasing. Corporate monitors each store's sell thru on each item, and sets the trigger point for restocking based on frequency of sale of each item. If your store only sells two or three grease gun hoses per year, that may not be enough to insure restocking when the inventory gets to zero. It’s all about insuring that the most popular items get restocked in a timely manner, and non sellers often don’t even appear in the store, but can be ordered online. Example would be finding snow shovels in the Tampa Bay stores…it’s silly to even stock them because they’re not a local use item.

My guess is 56 grease fittings on you’re saw mill

I purchased the AORRZER grease gun head, it works well, small calibre, on amazon.😀

PTS Pro Tools makes one that fits in to recessed ports great, but the length makes it hard to get into some tight spots. A 90 degree hose end helps.

My guess would be about 48 grease fittings. As for the grease gun end I have one made by Lincoln. Made of cast aluminum and broke off behind the coupler. I had ot make a new body out of steel. Only reason for making body is I bought it to use and not just to have. It has all the same issue of the one you have,

I recently bought one , not sure of the make to do the track tension nipples on excavators . I still have to try it out ! The standard ones are a mission to release due to the high pressure . A good quality grease gun is a Macnaught .

Is this Price Is Right rules? (Closest, but not over?) Ha Ha Ha.... I'm going to guess 50. I have a lock'n'lube version of that. Works OK, but as you found, I have some recessed ones that it's a no-go for. Andrew

Hi Josh my guess is 62 i think there's many that are hidden and i have greased so many trucks over the 30 + years i was a mechanic . something that would make greasing easer would be a great tool to have around the house. What i really need is some quality grease for my knee's . LoL. JM

Probably safer to use on high pressure grease points, especially on a large automatic dispenser. Best of luck to all who enter.

I have a different brand of lock on fitting and it works pretty well. Not as bulky as the one you have.

My guess is 52 fittings. Other utubers have rated this device very highly. One guy used his to tighten the track on his CAT with no leaks and that is a very high pressure application.

Wow! Now I am really envious! You have a hi rail truck and can actually use it on the rails! I worked for the B&O and NYC in the early 1960s and we had "speeders," that were actually cooler, if not as comfortable, than hi rail trucks. My Fairmont M19 had a 2-stroke cycle engine that ran both clockwise and counter-clockwise for forward and reverse. Thanks for the product review. The moment I saw that fitting I thought it was too large for recessed zerks. Yep. Nice that it doesn't leak, however.

i recently bought one of those. after 3 failed elbow operations its a help for me

I have the Lock-and-Lube coupler, short and long version, that Saker brand looks bigger diameter. You should've bought both brands to compare and give review. Menards is nowhere near me in ME, from what I see online it has huge variety of goods, the refrigerators are top name brands only, as oppose to HD or Lowes, dont know if I'd condemn a store over a grease gun.......

My take on the number of grease fittings is FIFTY (50)

Hello Josh Keith from Michigan. I didn't watch the hydraulic cylinder overhaul yet. But I have a channel, and this gent is from Australia. He does some great processes, and might be valuable for you. I'll forward this soon, take care now....

Looks like 23 fittings to me. Just for grins, we have a Lowe's, a Home Depot & a Menard's here in central Michigan. Comparing: we go to Menard's, as the others don't compare.

I've got a different brand of clamp on grease coupler. Works great on my Case 580C. 21 grease fittings

I'd say (56). Most grease fittings ends are 11/16" but that would be handy, great review Josh, keep'um coming..

My guess is 57 zero fittings.

Not something I can use in the motor trade, but looks great for your sawmill and similar applications

Just a guess: 29. Glad you brought to light the size of this product and the drawback.

I would guess 26 fittings. I've been looking at buying one of those, thanks for the review.

We have a lowes, they probably don't even have grease guns!!

Huh, we have all the big box stores near me and Menards is the best (price and product), lol. The internet is where you can get tools worth a hoot anyways. All stores suck these days.

I get that you hate Menards but I really wish we had one closer than several hours away. Menards stocks lots of products and types of products that I don't think I can even special order from the other two. As for the contest. 198 zerks ?

I'm going with 24 fittings

i am guessing 60 grease fittings

Hi josh nice honest review 👍 my guess is 32 grease fittings

I bought one 6 months ago and i have more grease in my trash can after wiping excess grease than in my zerk fitting. would not let me return it.

35 zerks is my guess Keep the videos coming Josh!

I'll guess 36. Menards is not my favorite either. Prefer Home Depot or L&M Fleet.

47 Grease zerk fittings

Be interesting to try on the farm. I'm guessing 100

My guess is twelve.

32 I have lock n lube and Chinese all about the same accept price

I've always liked high-rail/road-rail trucks. If the Zombie Apocalypse ever happens my first stop will be the CSX yard down the street and acquire one for myself. 😂

My guess is 67 Zerks.

i think 68 zerks

Be nice to know if the brand Lock n Lube has a smaller head than this one?

27 Would be my guess

My guess is 52 bearings. Thanks for posting.

I know the lock and lube work pretty good I'm gonna guess 22 grease fittings

As I said I believe there is 27 grease zerks I subscribe under the name Paul Bee

I'll make a WAG of 47 grease zerks.

Just a guess, 16. Love the channel, great content

42 fittings

25 fitings?

54 How did you happen to own a high rail truck?

28 fittings

3 hours and more common sand lakes then Robbie ever gets

1394 grease fittings!

I think it is 57? I hope.

40 fittings

26 zero fittings

34 grease zurks

I believe there is 27 grease fittings

My guess, too many.

👍👍😎👍👍

Hi 28 is my guess I live in the UK so give to the nearest if I win.

Rance here I think that there are 16

18 maybe

57 fittings

I know you live in the boonies but do you have any automotive stores nearby? They would have rubber hoses for grease guns.

I'm guessing 21 zerk fittings

My guess 120

Hi! 132 zerks is my guess.

I’m guessing 35 fittings

22

28

🤔🤔🤔🤔23🤨🤨🤨🤨 I sure hope that I never get on your bad side. I could not sleep so I got up and there you were.

50

17

48 is my anwser

51.

68

19

34 ...

76 zerts

34

I'm guessing 32 pieces.

33 Grease fittings

my count is 22