Cheap 2017 Ford Transit Custom Euro 6 Engine Fail PT 1

Рет қаралды 351,669

3 жыл бұрын

SRUK Merchandise :- www.stadiumsports.co.uk/club-s...
Sealey tool bundle amzn.to/3fG5Gxk
Instagram for daily sneak peeks :- salvagerebu...
Welcome to the Salvage Rebuilds UK channel. In this video we purchase a 2017 Ford Transit Custom 2.0 eco blue with a suspected timing belt failure.
Working at our fully equipped workshop in Kent we carry out tasks including Panel beating, Body work, Mig Welding, Sheet metal Spot Welding, Fabrication, Chassis Repairs, Sand Blasting, Engine and Mechanical repairs, DPF cleaning, Restoration and Structural repairs on the Celette Jig frame machine.
We do hope you enjoy this video and Check out our other videos on all kinds of vehicles including Barn finds, Quick flips, First wash, Repairs, Salvage, Restorations, Will it run, Accident damaged, Cat S, Cat N, Cat X Copart auction bargains, Non Runner, Flood damage, insurance write off, fire damage, smoke damage, electrical fault, stolen recovered, and anything else that arrives at the #Salvagerebuildsuk workshop. #RobandChris
Please check out our back catalogue of some previous projects on various different makes and models including Ferrari, Land Rover, MG, Caterham, Ford, Cosworth, Vauxhall, Fiat, Peugeot, Mercedes, Range Rover, Morris, Renault, Citroen, Honda, Toyota, VW, Series 3, Evoque, GLA, Golf, 500, Fiesta, Astra, Polo, Motorhome, Auto sleeper Camper, GTI, LSE, Sierra, Midget, 360, Transit, Crafter, Transporter, T5, Combo, Berlingo, Partner, Mini, Beetle, Vivaro, Hilux, Sport and many more!
We do receive quite a few questions regarding tools and equipment that we use for various jobs. Unfortunately there is to many to list but some of the brands we use include Snap-on, Blue-point, Makita, Sealey, Clark, Esab and Sykes-Pickavant.
If you are interested in a specific tool, please put your question in the comments section of the relevant video

Пікірлер: 1 100

@NeilsCarsAviationTravel 3 жыл бұрын

Nice video guys. BTW I actually fitted those seat covers last year after spending a few hours cleaning the seats after they got pretty dirty. For info, the van died on a roundabout going from 2nd to 3rd gear at around 20-25mph.

@sruk 3 жыл бұрын

Cheers bud we will get it sorted 👍

@TheCainabis 3 жыл бұрын

Exactly what happened to me, god knows why I’ve gone and bought another one!

@jashugg 3 жыл бұрын

@@TheCainabis Do the belts fail prematurely? Or can you avoid issues simply be replacing them at specified mileage?

@fredscratchet1355 3 жыл бұрын

@@jashugg Most engines about 75k I think these days. There are some recommended at 120k ish but would you want to risk it?

@TheCainabis 3 жыл бұрын

@@jashugg yeah change every 10,000 miles 😅😆 and replace everything else while you are at it!

@Mark... 3 жыл бұрын

It’s good to hear Chris talking more on camera and explaining his way of thinking 👍

@sofa-lofa4241 3 жыл бұрын

Chris on camera! ..... 👀... It doesn't happen often, but it's gold when it does! He is a great fountain of knowledge that hopefully we will all tap into as the channel progresses, He is a great problem solver and a back street enginerd par-excellence... I loved the rotisserie, that was some great 'on the fly' thinking, but the idea is only half of it, you have to bring it to reality, and he does that so well

@srobify3761 3 жыл бұрын

Rob and Chris are everything wheeler dealers wanted to be! 30 min episodes yes please. Surprised Netflix etc have not offered you a slot. Top blokes. Men of the people! Look forward to watching the videos after work with my dinner on a Monday and Wednesday.

@Mark-sm2jr 3 жыл бұрын

It will be the vacuum pump on the end of the exhaust cam rob, there are common pal, the vac pump breaks and can cause the camshaft to lock up and that’s probably wot as ripped the teeth off. Good luck with the rebuild! I’ve know some people get away with just a new vacuum pump.

@peterperry5378 3 жыл бұрын

''Love it '' makes our day watching you and Chris , my son is Autistic and we sit together watching you guys, he is so switched on with Mechanics and engines thank you so much and we are in awe of both of you, the way you solve mechanical problems.

@themayorofdipshittery3646 3 жыл бұрын

You mentioned the long videos, they don’t seem long because they’re so interesting. The time flies past 👍

@johnrigby9594 3 жыл бұрын

Did you really say "it's a bit stiff for me with one hand Chris " lol

@defconluke 3 жыл бұрын

Thanks for keeping the videos moving. If the video is 25 minutes long but has loads of content then I'm happy to watch them in full. There are some people who would spend 25 minutes a piece on half a dozen videos of 'Collecting our new van', 'driving home with our new van', 'getting our new van in the workshop' etc. which whould be an absolute drag. Keep up the great work, it's always good to see you working on something new.

@acorndogs904 3 жыл бұрын

26 mins good long video Look forward to fridays content The quiet man is getting involved

@dougfurniss734 3 жыл бұрын

Moral of the story, change your cam belt on time, great video lads, keep up the good work 👍

@scottlp2323 3 жыл бұрын

When the content is varied and interesting (and it always is), the time just flies by. Don't let the run time concern you too much. It takes as long as it takes. Work, wise words and some waffle. :) You can't go wrong. :)

@ghandarff 3 жыл бұрын

With the content you put in a video 26 mins is nothing because they never are boring, keep up the great work guys and looking forward to see how this one comes out

@mickeybonejelly 3 жыл бұрын

You guys could do an hour long video and it still wouldn't be long enough. We enjoy watching you two so much always entertaining and educational and it's great to see a lot more of Chris's input too, not so quiet now think he's gradually losing his camera shyness. Brilliant content keep up the great work boys.

@memyself7413 3 жыл бұрын

That was the quickest 26 minutes I have ever experienced. I really do like (Both) your attitudes when you do this work, because a lot of mechanics would decide “sod it, that`ll do!” You two, decent blokes, really do “stand out a mile” with your honesty, integrity and determination. If you don`t know about something, you openly admit it and don`t try to bulldoze your way thtough. “Absolute pleasure to watch and more power to your elbow, both.”

@neilkay159 3 жыл бұрын

From a Ford man with his 10th Transit I WILL not be having a new shape EVER.I keep my 63plate old shape forever!

@Stop..carry-on 3 жыл бұрын

Unfortunately if the area you live in is due to become a low emission /clean air zone - anything under a 2016 will not pass and be liable to a extortionate daily fee

@chrisdabrowski 3 жыл бұрын

@@Stop..carry-on soon there will be a zone where you will have to pay for breathing🤬🤬🤬🤬🤬🤬

@Stop..carry-on 3 жыл бұрын

@@chrisdabrowski or farting

@liamtownshend7726 3 жыл бұрын

Great video and you could definitely bang an hour special out , we’re all gormed until it ends! Very interesting as usual and that 26 min flies by ... keep it up my favourite channel lads 👍

@paddrivers 3 жыл бұрын

Seriously... nicest guys in the motor trade I could listen to you two waffling all day😁😎

@englishmaninengland4591 3 жыл бұрын

Rob & Chris, we love how honest you both are. You definitely have one of the best KZfaq channels. :-) Happy days.

@laurafogg6064 3 жыл бұрын

Rob / Chris, I’ve only managed to rupture my Achilles’ tendon and have been told I’m off work for several weeks. For the last three days I’ve been watching ALL of your videos from the off. Great stuff. I was laughing at the early ones calling Chris, “my friend” lol. Still all great stuff. Now keep these coming as I’m off for ages and can’t come with This Morning and loose women !! Help me out lads. Stay safe

@TheOriginalDaveJ 3 жыл бұрын

Really appreciate both you guys taking time out to produce these videos. Content is fantastic and I/we really appreciate Chris coming out his shell and having more interaction. Keep up the great work gents. Much appreciated 👏👏👏👏

@colinrowe3940 3 жыл бұрын

The in depth footage which involves fault finding is interesting to me. I don't mind the longer vids. Can't wait for part 2.

@simonlefevre8202 3 жыл бұрын

Absolutely love the videos you guys make. Great to see how you assess and move forward with projects. The honest appraisal of work needed and attention to detail is brilliant. Thanks for taking a lot of valuable time to share your work absolutely brilliant 👍

@lMi1es007 3 жыл бұрын

Rob I worked for Ford I’ve seen this so many times you need a new front cover valves piston belts super common issue with the 2.0 there is also a recall on the injectors so check to see if yours need doing

@jimbo9310 3 жыл бұрын

Rob watching this superb channel is better than watching the television any day of the week. It’s entertaining and informative viewing if you made them longer I would still watch them. Keep up the great work rob and Chris and thank you. 👍😊

@gonecywers 3 жыл бұрын

Rob & Chris, your videos are ones that I look forward to all the time. I thoroughly enjoy what you do and how you do it. You put a great deal of quality and integrity into your builds and repairs, which I very much appreciate. You do it right!! It definitely appears that you enjoy what you are doing and I will continue to watch as a subscriber. Please keep them coming. By the way, I don't think you charge enough for the vehicles you sell. The quality of your work and your time is worth more than what you typically ask and sell for.

@stevecourtney 3 жыл бұрын

Ahhh guys you made me laugh out loud with the seat covers "A bit stiff for me with one hand Chris" 🤣 Sorry.... My bad! Great video as always guys 👍

@acorndogs904 3 жыл бұрын

Good excuse for chris to have a play on the quad

@robturner7945 3 жыл бұрын

Your videos could last for hours and I would still watch them. Top notch as always gents. I’m looking forward to the next instalment.

@chrispoole4413 3 жыл бұрын

Good work guys. You must remove the sump as well. The oil pick up might be blocking up. The belts are de-laminating because of the excess diesel fuel that ends up in the sump post the DPF regen process.

@colinnewlands743 3 жыл бұрын

I saw that it was 26 mins but it flew past. Didnt seem long as there was a lot to get absorbed in. Felt as if I was with you guys trying to solve the mystery. Its not the length of time, its the interest. I cant wait for the next one on this van now.

@sprograt 3 жыл бұрын

If my memory serves me correctly the cover that was glued in place are single use only. Great video as always. Regarding lengths of videos make them 2 hours long and I would still watch them. 👍

@gethinjones1348 3 жыл бұрын

Love these mystery videos where you're diagnosing the problem and working on the solution, the longer video the better I would like to also add! 👍🏻

@davidhatton4423 3 жыл бұрын

I never tire of your videos guys, the in depth involvement is brilliant, keep em coming, see you Friday. 👍

@Imacomingtoo 3 жыл бұрын

This is definitely the best auto channel on KZfaq

@xinam 3 жыл бұрын

“We’re only going to take a look”… entire front end dismantled by lunch!! Cracking effort boys, you two don’t mess about!

@stevewhite1444 3 жыл бұрын

The time flies by when watching your videos, very interesting and look forward to the notification appearing. Be interesting to see how this one goes, sorry can’t help on the technical stuff but from a viewer point of view, never fails to grab my attention. Thanks Rob and Chris 👍

@progers2810 3 жыл бұрын

Love these Rob and Chris. What a great project that can be turned around for sensible money. Looking forward to the next!

@GM-mk3ep 3 жыл бұрын

As far as I am concerned, the longer the videos, the better!

@duffduff4948 3 жыл бұрын

Another excellent video, thanks for posting - very interested to see where this goes technically, and for mine I love the longer videos :)

@rbcleaningskegness9191 3 жыл бұрын

Great to see Chris on the quad having fun.. Loving the longer video's Rob and Chris.

@hugocofely7305 2 жыл бұрын

It's great to hear Chris talking more on camera and explaining the engine problems. If you spend three hours tinkering with an engine, you'll have enough knowledge and confidence to smile when you're done. Keep up the good work and I will follow you.

@tomtodhunter1776 3 жыл бұрын

Love the longer videos, Chris looks happy towing the van with the quad. I'm not sure if I like the idea of no key ways and press fit cam lobes, it sounds like a disaster waiting to happen, I may be wrong, and usually am! 😂

@simondowling4034 3 жыл бұрын

Would love an hr long episode 👍

@tomstovell7425 3 жыл бұрын

I like it when you guys do a vehicle autopsy. You’ve got a good way of explaining everything without a novice like me feeling thick! Cheers again chaps!

@spencerhowell9094 3 жыл бұрын

Great work guys . Love to see guys who take pride in their work.

@davewyatt5794 3 жыл бұрын

Always look forward to next video and the longer the better

@johnfountain8143 3 жыл бұрын

Been involve in a few of these .. almost certainly you will have bent valves do cylinder leak down test also common for the crank to be US and when you reassemble make sure you understand how the pump is timed it will not run properly if its not correct Regards JF

@paulmcdevitt8886 3 жыл бұрын

Brilliant insight once again Rob and Chris, fantastic , once again can't wait to see the finished item

@toafy1014 3 жыл бұрын

Like how yous guys usually buy everyday stuff that we can all relate to and afford instead of other channels doing same makes all the time, I’m sure yous will have this up and running no bother 👍🏻

@MirceaD28 3 жыл бұрын

Check for compression, and use a borescope. Look at the pistons and valves. It might not be bent, but could be chipped. You are at this stage... why not do this.

@ginobragoli1448 3 жыл бұрын

Cams that are permanently fixed into the cover (not sure where these manufacturers are heading) trying to get as much money out of spares as possible by the looks of it! Not very environmentally friendly either. NICE VIDEO guys++👍👊

@gleng6812 3 жыл бұрын

Nice work fellas looking forward to the 2nd video already along with the 2nd videos for so many projects! 👍 Not enough days in the weeks for these videos they are an absolute treat!

@bigfra79 3 жыл бұрын

Yet another quality video lads. One of the best, and most honest channels on YT. Keep on keeping on. P.S. Long, short, all videos are great and enjoyed.

@petersmith4455 3 жыл бұрын

thank goodness i was around in the 70s with the Jack Regan style transits that you could work on with out headaches

@petebird7171 3 жыл бұрын

Longer the better as far as I’m concerned 👍👍👍

@deanwainwright4204 3 жыл бұрын

Great video guys enjoyed that when ordinarily i would not watch a video about a transit engine fail! I like the fact you and Chris are like a couple mates on my driveway helping me to sort a problem down to earth guys with great screen presence and are well versed in your craft. Keep up the good work.

@ianratcliffe2299 3 жыл бұрын

Great vid guy’s nice to see they’re getting longer, love seeing all the detail as your going along and nice to see Chris getting in the vid and explaining thing’s, you guy’s make it look so easy and you always let us know what new parts your putting on which is really good, can’t wait to see the next.

@Weejie2011 3 жыл бұрын

The first diesel engine I worked on was a snapped cambelt. A Bedford Midi, which was an Isuzu. It sheared the rockers and did no further damage. 50 quid for replacement rockers from a scrapyard, new head gasket and oil seals (oil had leaked on to the belt, which caused the breakage) and new belt. Timing tools were just bolts to lock the sprockets and a small piece of angle iron to lock the camshaft and it was sorted. Other engines can be totally wrecked once a belt snaps. How sensible to design an engine with brittle rockers! Looks like this one isn't too bad either, even though it wasn't the rockers. If only people changed cambelts when they should be changed.

@rickconstant6106 3 жыл бұрын

The old Transit 2.5 Di used to break belts quite a lot, but you could usually get away with replacing a few bent pushrods, the occasional rocker and the lower belt cover where the belt had wrapped around the crank sprocket. Even after they went out of production, Ford was still introducing modified parts to try to make them more reliable.

@gosportjamie 3 жыл бұрын

That's a pretty good catch. The long wheelbase is a lot more unusual on the Transit Custom, pretty much all of them you see around are the short wheelbase so that could make it a much more desirable vehicle when it's all fixed... The engines on these are a bit notorious for issues, but I understand that the issues have been sorted out now. Time will tell... The old Vauxhall Family OHC engines used a separate cam carrier on top of the head too. In a lot of way it makes sense as issues with the camshaft won't kill the, much more expensive, cylinder head...

@timfenton5153 3 жыл бұрын

Great to hear you and Chris talking about things, like the investigation stuff, excellent, thanks

@raye402 3 жыл бұрын

More more more - Rob you & Chris make ultra cool Vlogs packed with downtown earth tips & advice. Quality - the Biz !!👍

@matthewpalmer1396 3 жыл бұрын

Worth checking the brake vacuum pump isn't seizing up as it could cause the belt to brake.

@desmondmcdonagh9667 3 жыл бұрын

With the cam lobes pressed on like you say and if the valves are able to push the cam lobes having give in them at a certain pressure rather than bending the valve when piston makes contact from stripped teeth or a broken belt etc . I’d rather change the cam box assembly than pull the head off . Providing like you said you dodged a bullet with the valves and there seating etc . It’s still a lot off labour for a belt . Considering mileage I’d nearly keep going and whip the engine out . Check the clutch flywheel and rear main seal . And you’d have access to see and repair and weaps and potential leaks that are a pain to get at with everything reinstalled . The long way round is often the shortest way home . For the peace off mind you can confidently give warranty on resale

@philipnewton7524 3 жыл бұрын

Rib Very interesting stuff you and chris have me glued to my seat with excitement I could watch you guys all day first class viewing cant get enoughof this chanel thank you guys for this chanel Phil in stoke

@markb9013 3 жыл бұрын

Another awesome video... and like many others say we could watch you guys all day long.. thanks again.

@llamedosr7843 3 жыл бұрын

These newer transits are nothing like as reliable as the old ones, mate of mine has had two flywheels in three years. Apparently the ice cream van engines are bulletproof, probably because they're made to tick over all day.

@mowfaux8620 3 жыл бұрын

More long videos please👍👍

@colmart1973 3 жыл бұрын

Great video guys and nice length, loved the diagnosis chat between you could listen to it all day👍

@Hassan123H 3 жыл бұрын

What a great video. Love hearing Chris’s thoughts and diagnosis of the problem. The quad bike is excellent, might have to get myself one of them!

@drivewasher 3 жыл бұрын

All the valves should be closed now if no damage. Put an air blow gun with a rubber nose cone into the injector ports one at a time. If valves aren't seale you will get air coming out either the exhaust ports or inlet port s depending on the valve damage

@mwheatley2365 3 жыл бұрын

It doesn’t feel like 26mins long this end - it goes so much quicker! I second/third/fourth the requests for longer ones!

@Chris1ar 3 жыл бұрын

Another cracking video, and great to see the cogs turning quiet literally on what’s wrong. Would be great to see another long one when you get around to fixing it. Top work gents!

@paultaylor9652 3 жыл бұрын

Lovely Jubbly, thanks for a really interesting video guys, engines have definitely change a lot in the past few years.

@duncb7937 3 жыл бұрын

Can you not pressure test the cylinders by putting an air line (blow gun with a rubber tip to seal) on the injector port and listen at the exhaust and inlet for vale leak or holes in the piston into the sump. Hope this helps.

@adeh503 3 жыл бұрын

Nice one lads 👌🇬🇧 don't these transit van's normally come with a free mig welder aswell 😀

@mk2steve23 3 жыл бұрын

Brilliant video guys really interesting. I didn’t want it to end I actually wanted to see you fit new cams put together and re start van and crunch the numbers . Can’t wait for the next one . 👌

@donnageorge-henderson5419 3 жыл бұрын

Yay, Chris smiling on the Quad 😍 great to see it being used. Cool man. Love how thorough you guys are and lucky bullet dodge 😎 hopefully replacing that top unit will solve the problem 😊

@jcar1343 3 жыл бұрын

Now the valves are off load with the cams out. Do a cylinder leak down test you will know if you have a further issue before putting it all back together 👍

@billplant2020 3 жыл бұрын

Guys just for your information I bought a 2017 same van. Timing belt snapped only 69k on the clock. Fords gave me a new engine .

@theteacaddy2766 3 жыл бұрын

Enjoy watching the content with the different vehicles you both get to work on. Hope you can both sort the problem out and it all goes back together as it was easy to take apart.

@ryanfrench2000 3 жыл бұрын

Thanks Rob and Chris nice long video on the transit looking forward to seeing if you find anything else wrong with it and the rebuild of the engine 👌👍

@paultrew4270 3 жыл бұрын

Great video! Can you pressurise the cylinders to see if the valves are sealed? Be a shame to put it back together and have a bent valve 👍

@sammytheseal2307 3 жыл бұрын

The reason people don't mind your videos being longer is because it feels like time warps by when watching them. Start to finish 26 minutes of SRUK feels like 10 mins to me 😁

@mt5144 3 жыл бұрын

Great Video, well documented by camera inside the actual engine bay, well done guys enjoyed that one!

@fearlessfreddy199 3 жыл бұрын

Watched every vid this has been one of the most interesting due to time and interaction and thought process brilliant lads can’t wait for follow ons

@jackhynes9168 3 жыл бұрын

A lot of th Opel corsa D’s as well as the 08 fiat doblos Have the same design with the cylinder heads I think it’s a good design Would it be worth your while looking with an inspection camera into each cylinders for damaged pistons ?

@Alexander_l322 3 жыл бұрын

Well at least the seats on this one don’t need cleaning lol. Send the cambelt to your man in Turkey to have a new set of teeth mate 😉👍🏼👍🏼

@deanharriss2029 3 жыл бұрын

You win best comment. 🤣🤣🤣🤣🤣🤣

@paulmartin4971 3 жыл бұрын

Hi Rob and Chris super interesting stuff great video. I can honestly say that about 95% of us would like longer videos!!! As they go so quick. Can't wait for next exciting episode thanks.

@andypeebles2242 3 жыл бұрын

Thanks guys, really enjoying the longer videos.

@smedley6444 3 жыл бұрын

Cam-belt change interval 144k/10 years, they never make this as belts not man enough due to diesel in engine oil deteriorates the belt, you were also lucky to get injectors out, as normally seize in.

@ianbambury3717 3 жыл бұрын

Check the vacuum pump hasn’t seized and caused the problem. I would change the vacuum pump as well

@chrisstyles4630 3 жыл бұрын

Fantastic looking van & a very nice long video can't wait for part 2 & see Chris work his magic on the dents & crease on the back wheel arch hope you are enjoying the weather guys 😀

@davidhughes1634 3 жыл бұрын

Once you start, you just can't stop,great work Rob & Chris,

@poppops62 3 жыл бұрын

Longer videos is fine by me! 👍👍

@markmillwall 3 жыл бұрын

I'm sorry rob but I couldn't stop laughing with your comment it's a bit stiff for me with one hand Chris your gonna have to do that for me sorry 😂😂😂😂 sorry mate that tickled me 👍👍👍

@progers2810 3 жыл бұрын

I tried to be grown up and ignore it but I couldn't help but laugh!

@mattlostatsea 3 жыл бұрын

So so funny...it wasn't ment to be smut im sure but lmao.......

@mattlostatsea 3 жыл бұрын

Its a bit stiff for me.....lol

@beerlodge5153 3 жыл бұрын

Great video lads. Really nice the way Rob explains whats happening for novices like me. Cheers!!

@baz200uk 3 жыл бұрын

Great video Chris and Rob, can't wait to see how you get on with this, love the longer videos the longer the better 👍

@johncavill1139 11 ай бұрын

covers are bonded on has to be replaced once repaired you have to be careful what oil goes in the engine 0 30 C2 oil

@kevinmullin4504 3 жыл бұрын

Had one of these from new in 2017. Been towed to dealers 3 times, nothing but constant problems despite all servicing being done. Broke down for third time last week, apparently the cam belt has snapped so probably a new engine required. Thank God its leased !