Save Countless Hours in FL Studio

Рет қаралды 8,561

Күн бұрын

In this video, I'll be creating a new custom template for myself, and going over some important things to consider if you decide to create your own custom template. Creating a custom template can ultimately save you countless hours of time in your workflow. If you have been following the channel for awhile, you know I'm all about finding ways to maximize workflow and save time. It's been a long time coming, but I've decided to make a few tweaks in my workflow and my template. I hope you find the tutorial helpful!
Download my custom template - shorturl.at/HRX35
Check out plugin boutique - bit.ly/3wkL5HE
How to sidechain with fruity balance - • How to Sidechain in FL...
Time Stamps:
Intro - 00:00
Why I'm creating a new template - 01:37
Creating the new template - 03:01
Adding a sidechain send - 04:11
How to route things in the mixer - 05:48
Adding a drum bus - 06:50
Should you add processing on individual tracks - 09:22
Adding more sends and buses - 10:00
Adding plugins on the master channel - 12:37
More about mastering and saving time - 17:04
You NEED to watch this if you're planning to use my template - 17:54
Quick recap of my template - 19:02
How to save your custom template - 20:43
Make your template the default template - 21:55
Outro - 22:24
Other Links:
📲 Join My Discord - / discord
👉 Private Lessons - bit.ly/3cNvQMw
🌎 My Website - anothermonsterproductions.com/
💰 Purchase Instrumentals - anothermonsterbeats.com/
📧 Email address required for the following free downloads 📧
📩 Download my free foley & perc samples: bit.ly/3iPC5n6
📩 My free ebook on getting better mixes: bit.ly/2SGF6eI
My Studio Equipment:
My studio monitors (mine are the 8 inch) - amzn.to/3j4duIN
My subwoofer - amzn.to/2OrAl35
My studio monitor headphones (new) - amzn.to/3exhL3O
My studio monitor headphones (renewed) - amzn.to/30hP6uy
My recommended studio monitor headphones - amzn.to/3xrGtN6
My open back headphones (DT 990 PRO) - amzn.to/35c8xYT
My current audio interface - amzn.to/2ZvRfUz
My mic - amzn.to/2CA5Bdw
My controller (Akai Fire) - amzn.to/30dlU8a
My PC - amzn.to/2RTsiRW
My electric guitar - amzn.to/2DCZG7N
My new camera - amzn.to/32mwoos
SOCIAL MEDIA
Facebook: / anothermonster
Instagram: / anothermonster1
Twitch: / anothermonster1
Discord: / discord
#flstudio #customtemplate

Пікірлер: 44

@AnotherMonster 2 жыл бұрын

Hope everyone is having a great weekend so far! Here is the template, but if you download it, make sure you watch the section of the video that says "you NEED to watch this if you're planning to use my template" - bit.ly/3N13RcN

@_mickmccarthy 2 жыл бұрын

Massively underrated tip, while it's likely going to change over time, it does save so much time. Opening up FL Studio and just having everything already set up so you can just focus on the music making! Looking forward to learning some more tips about how best to go about setting one up!

@ariestrucker7832 2 жыл бұрын

This works for people who have the experience, and have developed a routine using techniques and plugins...they KNOW gives them the best results.

@deadlyrobot5179 2 жыл бұрын

I did this 3 years ago and I hate myself for not doing it sooner. But in another hand you need to find your favorite plugins and style to be able to do it properly, my templet is still evolving to this day. I hope more KZfaqrs had a video like this, thx for the tip man.

@AnotherMonster 2 жыл бұрын

I'm in the same boat. I've had a custom template for awhile, but I've been thinking a lot of tweaking my workflow a bit and also my template. It's been a long time coming but I think all the changes I've added to this template are going to save me a LOT more time. And I do think everyone should create their own custom template and tweak it over time as you mentioned

@DjPaulGreenEindhoven. 2 жыл бұрын

All the way from Holland Netherlands .. I say big thanks for all your video.s it helps me alot ...and i wil use this new work flow for shure ...greetings and have a good one ...

@skjortan 2 жыл бұрын

Great great tips! Especially the one about mastering in the same project, why havent i done that before! Down to earth and well articulated. You are gold =)

@c1966m 2 жыл бұрын

I like your patcher mid side eq on the master, thanks for that tip David ;-)

@ketz_165 2 ай бұрын

I’m so thankful for this, I have adhd and I literally never get anything done because organizing is so boring. Thank you so much

@AnotherMonster 2 ай бұрын

no problem. I definitely know the feeling

@Enkeria Жыл бұрын

Never used mixer in any project, but I guess I will have to learn. Been doing hobby music since 97.

@stevenhammerle Жыл бұрын

Such a great video!! 🙌

@ThatOneGirlDrummer 10 ай бұрын

I've been using FL for like 8 years and didn't know about the shift scroll in the playlist at 3:52 lmaooo 😭 thanks for this video!

@gar3thbeatz Жыл бұрын

Awesome video, thanks! 🔥🔥

@ahmedaly4704 2 жыл бұрын

Thank you man, this video is an amazing and very important subject!

@AnotherMonster 2 жыл бұрын

Thanks man!

@STRM1106 2 жыл бұрын

Great Vid as always!! thanks for the template.

@AnotherMonster 2 жыл бұрын

Np bro!

@melsmith9362 2 жыл бұрын

Brilliant advise thank you so much for your time

@AnotherMonster 2 жыл бұрын

No problem! Glad it helped

@pick_nark 2 жыл бұрын

This is something that I've been neglecting to do for years haha. I think I might finally set one up. I also find that it's way easier to do the mastering on the same track. I used to render out a separate track too and ended up always needing to fix something in the mix. Great video man!

@AnotherMonster 2 жыл бұрын

Thanks man! You’re definitely not alone in neglecting the template. I did it for a long time too

@rectify2003 2 жыл бұрын

Awesome

@kabukijoe99 Жыл бұрын

You should have more likes. Very good lessons and English/ It is easy to understand you

@dymar_lasoul 2 жыл бұрын

My Lecture 😊😊😊♥️♥️

@skjortan 2 жыл бұрын

I just have to say that that a song can often be very personal and so can a template. Meeting the same template with the same color variations and plugins can (sometimes) do bad for your inspiration. But, like in every situation, listen to yourself, from all the things you have been taught, you have to choose what feels right for you in that moment.

@ORIGINAL_MEDIA 2 жыл бұрын

👍👍👍

@unused0011 2 жыл бұрын

I was using a custom template for about 6 years but recently gone back to using just the empty template.

@basseniash 2 жыл бұрын

Hi! Is it possible to create slap bass-house in Sytrus as Dynoro did?

@AnotherMonster 2 жыл бұрын

It will probably be easier to make in a synth like vital, but I’ll see what I can come up with

@basseniash 2 жыл бұрын

@@AnotherMonster I am learning how to use Sytrus. All People say Sytrus can do anything. You will get the service of Sytrus, you do not need external instruments. Is it true? hmmmm ... Please prove. Thank you and sorry for your time

@AnotherMonster 2 жыл бұрын

@@basseniash you can do anything in Sytrus, however plugins like vital are bit more user friendly and easier to create some sounds. I’ll see what I can come up with in sytrus tho

2 жыл бұрын

I have one question that I can't seem to find the answer to. How do I send a track through a sidechain send along with a reverb/delay send as well? I never get the sound I want when I send them through both at the same time. If you could include the answer to this in a future video, or refer me to an old video, or just a quick reply, that would be greatly appreciated!

@AnotherMonster 2 жыл бұрын

Never tried to do this and I’m not sure there’s a good answer. You may have to just settle for processing the tracks separately and then routing them through the sidechain. You can always copy and paste your effects chains. It’s possible there’s a better answer out there, but I don’t know it

@coolscube5062 2 жыл бұрын

Hi There David hop your well ... when i 1st stared using fl studio 20.7 i added this German music producer to my insta after a while we got chatting dm each other .. anyway this one time i showed him my FL Studio set up by sending him screen shots .. he message me back going tits about i haven't got the mixer channel controls the same side as the Channel Rack & Step Sequencer controls.... what a plonker i thought i block him in the end he carried on ranting .... not quite what you need when your just starting out

@AnotherMonster 2 жыл бұрын

There’s no right or wrong way to set things up. Only personal preference. I always try to encourage everyone to find a workflow that works for them.

@Akilltersebas 2 жыл бұрын

Me who does this, but realises I need full version...

@slingstone Ай бұрын

I'll stick with 11.

@DeL1veRRRy Жыл бұрын

your template has been blocked by Bitly :/

@AnotherMonster Жыл бұрын

Here's the direct link - anothermonsterproductions.com/1be3e8a1-fc24-4c01-8c88-269c42de2599/

@CelticStone 2 жыл бұрын

Great vid, I drop span and youlean onto my 'Current channel'

@AnotherMonster 2 жыл бұрын

Nice. Definitely a must have

@AutPen38 2 жыл бұрын

Yeah. I love having meters and analysers available for every track, but until recently I was adding meters to individual mixer channels (especially if the master channel had some other effects I wanted to be "ignored" by the meters) and then I suddenly noticed there was a *Current* Channel next to the master that is the perfect place for analysis/meters. I don't need a VU or LUFS meter or frequency analysis plugin loaded on *every* channel rack or the master. Just put them on Current Channel and then use left/right cursor keys to check each mixer channel.