SAWSQUATCH! Skilsaw 10-1/4" Worm Drive Circular Saw

Рет қаралды 34,456

6 жыл бұрын

SAWSQUATCH! 10-1/4" Worm Drive Circular Saw
If you cut 4x and larger lumber, the Skilsaw 10-1/4 in Worm Drive Circular Saw is either already in your arsenal or it is on the want list. If you are building large projects and are sandwiching multiple 2x's, a single 4x or even 6x, this saw will power through allowing you to make fewer cuts. A 4x can be cut clean in one pass along with stacked 2x lumber or laminate beams. The motor on this worm drive saw is a 15-Amp dual field motor designed specifically for the larger 10-1/4" saw. It is designed to keep the motor cool under high load while providing the power needed for large, long cuts. With all of its magnesium parts, the saw weighs in at 16.5 pounds and thankfully includes a rafter hook.
Features & Specs
• cut 4x clean a single pass
• 15 amp Dual-Field motor
• Magnesium motor, shoe & guards
• Oil bath gear box
• 40-tooth Diablo carbide blade
• 15A motor
• 4600 RPM
• 3-11/16″ cutting capacity at 90°, 2-3/4″ cutting capacity at 45°
• 51° bevel capacity
• 16.5 pounds Without Blade & Cord

Пікірлер: 49

@BillyRoberts 6 жыл бұрын

Josh, went to Lowes last week and bought a saw like that. Used it to cut some 2 by 10 boards. I built 5 riser steps for my porch. I really like the quality of the saw. I did some horrible cuts at first. But figured out what I did wrong. I was really happy the steps turned out so good.

@wendtgonefishing 2 жыл бұрын

Billy Bob just smacks the new saw on the timber… 👋 him

@bwillan 6 жыл бұрын

If you are doing big timbers regularly, just get the Makita 16-5/16" 5402NA circular saw and be done with it. 6.25" cut depth at 90°.

@EssentialMountainHomesteading 6 жыл бұрын

bwillan, We run the Makita when we have to but it is under powered and heavy so it's not my favorite saw and definitely for every day use

@Frenchcanadiancarpenter 6 жыл бұрын

or the new skilsaw super sawsquatch :-)

@SKILSAW 6 жыл бұрын

Great video! You're right French Canadian Carpenters - the new Super Sawsquatch cuts 6x in one pass...and it's a worm drive. Coming soon!

@EssentialMountainHomesteading 6 жыл бұрын

SKILSAW, how do we get our hands on one of the new saws? We would love to test it out

@Frenchcanadiancarpenter 6 жыл бұрын

Essential Mountain Homesteading it's not easy, I contact skilsaw and chervon and they never come back with a answer. I would love to make a few video and review to on my Instagram page.

@beachlife1411 6 жыл бұрын

Super nice saw

@plgard 6 жыл бұрын

Nice addition to the quiver! ...And for the 10x10s, Skilsaw now offers the Super Sawsquatch (model SPT70V-11). 😤

@darrenwarren958 5 жыл бұрын

We had a hard time cutting full depth with this saw. The blade would flex out of square. Returned the saw for refund. Definitely interested in trying skills new 16 inch saw .

@mschaefer9634 4 жыл бұрын

I'm having this problem right now. Cutting green cypress for a timer frame pavilion. On an angle cut, I found that despite a plumb entry cut, the exit was as much as 1/4" off plumb. Slower cuts made the wood smoke, but did not change the exit angle deviation. I found that I could minimize the problem by not using the black handle. Pushing down on the red handle maximizes contact with the wider part of the base. Using the black handle, screwed in on the left side, was causing me to put left leaning pressure on the narrow part of the base as the saw exited the wood, and tgat accounted for most of the deviation. But not all of it. Skil has some work to do on this saw.

@ryanp.8387 6 жыл бұрын

Happy Easter !!!

@jcnme Жыл бұрын

I just bought one today. Used (New Never Used) For $225.

@stormbytes 2 жыл бұрын

I would have gone with the 16" Skillsaw for timbers that size.

@leoruocco9128 6 жыл бұрын

Just wondering are you guys working by contract or by the hour?Love the videos just wondering weather the homeowner or the contractor is paying for the great videos?

@EssentialMountainHomesteading 6 жыл бұрын

Leo Ruocco, We always hard bid the job if the camera is going to be on site.

@Tomhohenadel 6 жыл бұрын

Josh, very nice saw. Is it donated for your use and recommendations. Looks like the saw that Jim “Mr Tradesman” uses

@USNERDOC 6 жыл бұрын

👍🏻

@joederochemont6219 3 жыл бұрын

So does a worm drive have advantages over a regular standard Skilsaw? Is it just user preference? That particular one is a nice big saw, that's handy. Doubt I'd never need one but I do love to buy tools lol

@Iamfirebird360 3 жыл бұрын

Worm drive saws have better power delivery by design and also better cross reach when cutting do to handle placement. But also have a higher tendency to kick back.

@noc8076 6 жыл бұрын

How is the old property going? Have you been able to sell yet, or is it still covered in 10' of snow?

@EssentialMountainHomesteading 6 жыл бұрын

NoC I'll bet its still got 5' of snow on it

@jonsmith9708 3 жыл бұрын

What size is that timber 7 1/2"?

@BrianBriCurInTheOC 6 жыл бұрын

Grizzly and the crew working with The Big Wood! This morning I was searching in KZfaq and found Mr Grizzly doing Wood Mizer Wood Milling!!!

@EssentialMountainHomesteading 6 жыл бұрын

Brian Curwick Get ready As the weather gets better we will be back on the saw mill cutting up some timbers.

@rodneywroten2994 6 жыл бұрын

and in the rain. come on sunshine

@EssentialMountainHomesteading 6 жыл бұрын

Rodney Wroten I fear the worst of the weather is ahead of us as the spring rain rolls in.

@timbarry5080 4 жыл бұрын

I saw (no pun intended) one if these in a pawn shop the other day. It was marked at $329

@EssentialMountainHomesteading 4 жыл бұрын

That's not a bad deal. But I I've only used my saw twice in the last few years. It's hard to tie up 300.00 if it only gets used every once and a while

@timbarry5080 4 жыл бұрын

@@EssentialMountainHomesteading ok. Thank you. I've never seen one before so I had no idea of the value. I really don't even need a mag 77, my porta cable side winder seems to do the heavier jobs pretty well. I mostly use my cordless Milwaukee m18. I just want a worm drive cuz they're cool. I also wanted the 12" portable Makita hand planer I saw online for $2500. But I'm gonna have to pass on that one lol.

@TheCanadianBubba 6 жыл бұрын

Never had a wormdrive, wonder if they are that much better ? other than the 16th or so deflection in my regular skill saw clone.

@TheCanadianBubba 6 жыл бұрын

If you can not spin the work around or if you have to cut with the slender side of the base as the main contact, that is a pain with any saw... no ?

@shannonwyatt1286 5 жыл бұрын

I use chainsaws on something that big...jusy faster no turning the lumber or squaring all four sides.

@TheCanadianBubba 5 жыл бұрын

That would be too "rustic" a finish on this job

@offgridpirates7400 6 жыл бұрын

SAWQUATCH by SASQUATCH ....

@chicken311 5 жыл бұрын

Its called a chainsaw, I have one that will cut perfect 90's up to 12" thick. My dad machined a small table for the bar. Even free cutting it with a chainsaw and cleaning up the edge will give you a better cut than a skilsaw, they never line up perfectly. Just saying there are better ways to cut bigger timbers. I thought about buying one of these saws for about 3 seconds and realized I already had it perfected..

@shannonwyatt1286 5 жыл бұрын

Fuck that...use a chainsaw...a stihl...if you can't cut timber on a straight line with a chainsaw you don't need to be doing it. No way id drag that corded saw around like that...just a waste of my time. I can cut 3 of those timbers in the time it took you to square and cut that one. Just saying. Have two men with 2 saws and have both cutting and carrying there own cut. Two men per beam is nice but one per beam and two cutting is more productive.