My wife destroyed the #2 Phillips on my 11-in-1 Klein screwdriver last week while assembling a shelf from Walmart. The Klein was made in Taiwan, not in the USA, so that may be the explanation. Still, I've filed for divorce.

Man with a field watch, sampling Klein tools. Im in there like swimwear. Love from the Philippines.

I will always, always take my tool advice from Al Borland. 👍

Excellent review. Love that 6 in 1 stubby.

I just got in the new klein ratchet screwdriver I love it and also got the glow in the dark wire stripper after seeing them in one of ur videos so thanks I've been in construction since I was 16 and work on cars too but klein is the only screwdriver I'll ever use. GREAT VIDEOS THANKS

Soo much innovation that their handles haven’t changed in 20 years. I feel like they need to redesign the handles to be more ergonomic.

I Have the same Adjustable, it's awesome, I Cut of the rubber, and use the acetate underneath and I like it a lot better. You can also hold 1/4 shaft impact bits in it. I really wish kein would sell a bit set 1/4 shaft flip bits of all types to go with it, and maybe even a nut driver set 1/4 shaft would be sweet. Great videos man!

5:31 nah what makes it the best is taking that insert and putting it in the ratcheting multi bit so now you have a ratcheting nut driver. Learned that life hack from a buddy and man its nice!!!! Its fun to swap around klein attachments and make the tool even more versatile

I recently bought a Klein 32305 multibit ratcheting screwdriver. It is a 15-in-1 screwdriver. It is on the heavy side, but the first time I used it I was really impressed. It comes with a Combo#1 and Combo#2 bit that are designed specifically for the screws on light switches and outlets. These bits are a combination of Phillips/Flat/Robertson. I recently changed a toilet seat. The screw was a #3 Phillips. I went to use a classic Craftsman screwdriver that was in mint condition. It would not fit into the screw. The Klein fit perfectly and held onto the screw. I was really impressed with the quality.

I was watching your video (excellent as always) and it finally prompted me to order a Klein Tools 32460 which is the VACO acetate 4 in 1 (I am sure it’s really a 5 in 1, I wish it were a true 6 in 1). But it’s PB Swiss expensive as we discussed last time you mentioned acetate multibit Kleins. ($36).

I think Klein needs to sponsor a support group for us 🤣😅😂 I have everyone of those drivers and love em ... As Bill Clinton use to say , I feel your pain ... Thx as usual ...

I agree with classic handle for klien multibit too

Klein sells an Adjustable Blade Set for that made-in-USA screwdriver. Gives you a small phillips & flat blade, and square 1 & 2 blade. That would make it kind of like the heavy-duty 10-in-1, without the nut drivers, but with extended reach on every bit. Could be interesting to try.

Nice video. I think you were looking for the 32559 model, which is similar to your 32560, but has: 3/16-Inch (5 mm) and 1/4-Inch (6 mm) slotted #1 and #2 Phillips 1/4-Inch (6 mm) and 5/16-Inch (8 mm) nut drivers

The Picquic screwdrivers are another bunch i like along with the Kleins. If you haven't tried them yet give em a shot.

I love the multi stubby, I don’t want to carry more then one stubby with how rarely I use them

I have that impact bit stubby and keep it on my desk and in my pocket anywhere I'm visiting for those kind of work. In fact, I do not really need a stubby that frequently but sure it is assuring that I have something to screw with. But I have a few caveats on the stubby. 1) The bits are not really a standard(?) size. I was trying to replace those slotted ones with short torqs that I have... but the stubby's bits were a bit shorter than those standard short bits and the standard bits do not fit into the stubby's container. I can still use them at the nose, though. 2) Connected to the first one, it does not have Torq by default. But still, the extendable, impact grade bit holder works really well with my 12V impact driver, everywhere in my house.

I would try an 11-in-1 with an acetate handle but for me, most of the time, the rubber grip is OK. The only thing I don't like about the rubber grip is when they loosen from the handle; luckily, Klein is good about warranteying them out. Or you can just glue them back down. Trivia: Did you know you can fit the flip socket nut driver shaft into the magnetic bit holder driver, and you'll have like a 21-in-1 driver? I carry one every day. Speaking of alternative grip styles. I really miss the Witte style Grip-right handles. I have an OEM tool acetate handle multi-bit driver for when things get dirty or greasy. I'll also always have a Snap On diamond tip #2 philips in my pouch as well. It will take out screws no other driver can. Thanks for the video. I enjoyed hearing your take on Klein screwdrivers.

Great videos. Have you tried the Wright Tools screwdrivers? They sound like something you would like.

Just bought some Klein gear, today. Finger Ratchet & 7in1 Flip Socket/Impact. My screwdriver, was sold out as usual. But I would add the 7n1 flip socket driver to the 11 in 1 multi screwdriver, or 14n1, 15n1. I was going for the 15 in 1. They're always sold out. - 1/4-Inch Bit Holder Klein Tools 32907 - By the way... Klein They just came out with a small Impact flip socket kit....with 1/4 - 1/2 bit adapter with small case. - Impact Socket Set, Imp. Klein Tools 66070 - - - PS Glow in the Dark, Acetate Handles 4 Ever. Because it feels good, and it's freaking cool... And I can see it, when i drop my shit in the dark...

Hey, as one Klein screwdriver guy to the peanut gallery. When identifying a Klein SD to video, I think it's probably better to show the stenciling on the back of the screwdriver (if it's still there). I wouldn't know a part number, but the stenciling will tell you everything. P.S. nice catch on "it has a 9 inch shaft" your friends would have put that on your tombstone.

I just picked up an Ideal 35-947 flip screwdriver that is identical to the klein you love. Its also made in the USA and I bet Ideal may manufacture both. As I understand it Ideal makes the handles for Klein and it isnt a far stretch to believe Ideal makes most of kleins driver tools since Klein is really a plier style manufacturer. Ideal owns Pratt reed and Western forge so it makes sense that they still manufacture driver tools in the USA. Ideal owned SK at one point and those SK mini pliers you have are western forge.

does the klein flipper one accept regular hex bits/extensions too? for example like the diablo 12in locking bit holder or something equivalent to that?

My multi bit stubby I took the bit hold out and swopped it with a 3" 1/4-5/16 flip socket holder. Not sure why Klein didn't sell it with the option.

What's underneath the rubber grip on a Klein screwdriver? Have you ever removed the rubber?

My 11 in 1 has snapped bits, here in the UK it’ll cost me more to order parts from USA than to replace the whole tool……………….. My extensive Klein kit has to go now, looking to go Snap on/Knipex/Wera/Milwaukee etc. Klein do a RapiDriv which was on my list next, that tool I will miss sadly.

I found a Klein multi bit Glo in the dark screwdriver the other day, unfortunately it was missing one of the blades, and the straight screwdriver bit was chipped.

Klein is amazing. I am still replacing things with Klein.

klein does make the adjustable with the vaco handle

I love Kline screwdriver. But do have an incredible Wera turbo screwdriver with 19 tips. And their impact #2 Phipps. However I must have about 13 different Klein Screwdrivers extendable screwdrivers at hiding the handle handles open up and have all kinds of bits in their drivers that have like 10 different nut drivers on their couple of them go right through I have the nut drivers at flip around and give you a 7 in 1. Couples stubby's ratcheting. However most of my electrical tools go over to often copied never duplicated Knipex the king of pliers

I bought a Klein 11-n-1 a while back and unbeknownst to me it was made in Mexico and was really bulky and heavy. Not a fan, but willing to give the USA Klein line a second chance

I was very disappointed in the Klein 6 in 1 extended. So much slop in the shaft and bit holder. Maybe I got a defected one. I like the size of handle and it’s a great length but the slop ruined it for me. Threw it away and kept the bits

Hello, I enjoy the content but one critique I have is you fidget too much with the tools and so close to the lens. The focus goes haywire and you don’t get a good look at the tool’s because you’re moving them soo much. Great content by the way!

It ain’t Klein it ain’t mine

Hello my friend your volume is off.

rubber over-molding on everything is the most nefarious engineering-to-failure i ever touched. i have a Wera screwdriver that became yucky on the first day even though i cleaned it immediately after use, only a caking of dirt over about a year made it usable again but it will probably go yucky again as it gets old like any other over-molded tool.

klein innovates everything but their handles. never buying klein again. handles are dog ass and until they change, never buying another klein driver

The Vaco screwdriver is a very close match to the Xcelite line of drivers. Especially the handle form factor.

All they would have to do is not put on the rubber grip and inject a different color plastic for the vaco line.

"I hate a jiggly, feelin' screwdriver." 🤺 - 16:40 -