Scx24 Furitek Rock Racer first run.

Рет қаралды 2,088

2 жыл бұрын

New chassis specifically designed for use with Furitek Godzilla motor (I use Castle 0808 motor in this video to show larger motor fits) but of course can run many other motors. The chassis will also fit Tegu esc and separate receiver with large battery. Do you need to use the larger electronics? Not really. Just wanted to show that you could👍.

Пікірлер: 25

@YOOPDLRC 2 жыл бұрын

Great crawling 👍😎👍😁😁

@tiborvon 2 жыл бұрын

That little truck looks mega dude 👍

@Gamyrc 2 жыл бұрын

Thanks👍, I should be getting my bigger pinion this week for better runs😈

@vincec9451 2 жыл бұрын

Rc madness rite now keep up the grate work .Hello from V&B speed a new rc channel 👋✌🌏

@SlavaRC 2 жыл бұрын

Very cool and beautiful crawler my friend!)🥰🤩💥💯👍👏

@Gamyrc 2 жыл бұрын

Thanks👍

@growingrcs 2 жыл бұрын

Sweet little rig bro 😎

@Gamyrc 2 жыл бұрын

Thanks👍

@cncrcOG 2 жыл бұрын

👍😍👍

@timwegman5776 2 жыл бұрын

Nice build. I'm working on something similar, I started with the C10 but fully upgraded everything, streted the front with rear high clearance 4 links, widened 8mm each side, and brass weighted everything, huge 64mm LG tires, Treal bead locks, double barrels, AGF giant servos front and rear (Rear steer), injora aluminum rock bouncer chassis, furitek lizard pro, komodo outrigger and my own 6ch Rx/Tx. I'm forgetting some stuff oh like the bumpers and the LEDs but I have a question for you like you I'm interested in speed and I added 15t pinion with 3s and picked up some speed but I'm going to switch to the Godzilla motor from furitek have you heard of it? 4000kv and it's used for the monster trucks and the rigs I've seen hall a$$ but I was told it will not crawl at all I don't believe that also I'm running stock transmission and I think I'm stripping gears have you had this issue? If I hit something it can't go over it makes a stripping sound and dosnt move so it has to be the transmission so should I replace the gears or the go to an aluminum gear box do you think? Sorry for the long comment I can't get help on this from anyone it seems like everyone just wants to go as slow as possible. Thanks

@Gamyrc 2 жыл бұрын

Ive definitely heard of Furitek's Godzilla motor. I designed this rig for them to use that motor on. It works for speed obviously but if you want super slow crawl If suggest the Mini Komodo. Its slightly slower on kv but much lighter and lower center of gravity. If you going for speed I say commit to it. Dont worry about slow crawl as you will rarely use it. If necessary you could always just swap to a smaller pinion and be good to go👍.

@timwegman5776 2 жыл бұрын

@@Gamyrc yeah I’m in it for speed so I’m going to go to the Godzilla now I already have the Komodo installed so I should be good with just installing the Godzilla in it’s place right? I don’t need the rocket man transmission since I’m already set up with the front mount led mount from the Komodo right? And thanks for the help

@Gamyrc 2 жыл бұрын

@@timwegman5776 You should be good to go👍.

@seth9537 Жыл бұрын

I'm looking for some M2 male female axle extenders (couplers) for my Redcat Sumo Crawler. M2 threaded male and then M2 threaded female hex. Can you direct me to a good option(s)?

@rcbuilder111 2 жыл бұрын

That looks so great my friend how your muont the motor

@Gamyrc 2 жыл бұрын

I made my own 3d printed mount. I sell mounts for these motors on my Shapeways store. Just look up gamyrc and you'll see all my designs👍

@rcbuilder111 2 жыл бұрын

So sweet I will go check it up now

@sammyboswelldirtybrc7580 2 жыл бұрын

Hi was putting a system together pretty much same as yours was wondering if u had any problems with stuttering from the motor I have lizard pro and a castle 5200 kv motor trying to figure this thing out

@Gamyrc 2 жыл бұрын

You would need to play with the foc adjustment but to be honest Im not 100% sure the esc can handle the 5200kv. I am using a 60 amp esc to run my 6100kv motor tests just because of that. The esc can handle higher kv motors than that if the motors are smaller but the 0808 castle motors are too big to run on these esc reliably if going too high on kv. It may survive for a bit but its a huge draw on the tiny esc especially if trying to get some slow speed control out of it.

@aucrc-alwaysunderconstruct2765 2 жыл бұрын

Which of your mounts fits this 0808 motor?

@Gamyrc 2 жыл бұрын

www.shapeways.com/product/4GQAQS2EF/scx24-holmes-hobby-380-revolver-low-cog-plate?optionId=195164488&li=shops

@aucrc-alwaysunderconstruct2765 2 жыл бұрын

@@Gamyrc thanks for the quick reply. Does this interfere with the movement of the front upper links at all?

@Gamyrc 2 жыл бұрын

@@aucrc-alwaysunderconstruct2765 It does, thats why I suggest using rear links in front and front links in back from a Deadbolt. As you can see on the video the front links are much longer and being dual upper links allows for room for the longer and larger motor. Its the best way to go about putting such a large motor on such a small frame.

@toallotakido 2 жыл бұрын

Where can I get it.?

@Gamyrc 2 жыл бұрын

I designed it to be sold through Furitek. Its meant to use their new Gorilla motor so you can get some serious speed out of it. This was just a quick run at half speed. Of course you can use with other motor combinations but wheres the fun in that😉😈.