a quick video, as requested, showing how I setup my casting cannon and use it for Casting.
Пікірлер: 65
@chrischaralambous2863 жыл бұрын
I use one of these myself. They are absolutely fantastic. I attached mine to the rod using wide cable ties. It is solid. Great video. 👍
@gsp3 жыл бұрын
Exactly! It's all what works for the individual 👍 they are cracking little devices
@chrischaralambous2863 жыл бұрын
Absolutely, they really do give some extra distance to the cast. When I used mine for the first time, I was amazed at how much extra distance I got.👍
@steveharding8835 Жыл бұрын
Very informative and easy to follow instructions. Keep up the great work greg.
@gsp Жыл бұрын
Thanks Steve👍
@Lilith-Rose3 жыл бұрын
Aye cheers for that, my main reason for not using heavy braid straight through was the cuts I get on my casting finger pretty frequently even when using mono, I'd seen these before but never really considered them for my purposes but now I might have to pick a couple up
@gsp3 жыл бұрын
I would still use lighter braid with a mono leader regardless👍
@timfromammoniteknives42123 жыл бұрын
That’s handy! My one arrived from veals this week!
@cjwoodsa2 жыл бұрын
Ahaha! I should’ve watched this before attaching mine and loosing a decent Wessex rig first cast! Thank you for a great explanation. 👍
@gsp2 жыл бұрын
Oh no! Don't worry we all learn something after disaster has struck🤦♂️😂 I've done it many a times. I'm glad the vid was useful 👍
@johnandrewservice85982 жыл бұрын
Thanks for sharing this wonderful information 👍
@gsp2 жыл бұрын
👍
@trampster73063 жыл бұрын
Good video! I've got two as well, from good ol' Norman at Breakaway tackle. They definitely help with casting. True what you say about it sometimes being difficult to attach to the slope on the rod - I put some neoprene double sided tape under the Cannon and used zip ties, 2 each side. Saw your post on TSF about the Rig Jig so gave you a sub. Stay safe & well. 👍👍
@gsp3 жыл бұрын
Many thanks for the sub and I did see your like👍
@bomvu3 жыл бұрын
Saw you using one of these a while back and gave it a try, never looked back. I may see if moving mine back a bit makes a difference as I have the same Sonik. Many thanks as ever for good informative content.
@gsp3 жыл бұрын
Many thanks for watching and supporting this channel and I'm glad I've managed to help out
@chrischambers54663 жыл бұрын
i don't know why I watched this......I use multipliers!!😂
@gsp3 жыл бұрын
😂😂😂😂 Thanks for the veiw! 😂😂
@Brian-mb9ez Жыл бұрын
Great video, I bought one of these a couple of years ago to replace another similar piece of kit as yet I have not fitted it, at least I now know how to, cheers
@gsp Жыл бұрын
I find them great little devices👍
@bernardonokohwemu1428 Жыл бұрын
Great instructor you are. This video is a masterpiece, so easy for a newbie enthusiast like me to understand and enjoy. Thanks 👍 A pleasure to like and subscribe.
@gsp Жыл бұрын
Thank for your kind words bernard👍 I'm glad the video helped
@bernardonokohwemu1428 Жыл бұрын
@@gsp Yes, it did help me a great deal because there's someone like you who's teaching benefited me without having to search too long. Thanks 👍👍
@saltyhooksfishinguk Жыл бұрын
Well done mate👍
@gsp Жыл бұрын
👍
@fishingnorfolk3 жыл бұрын
Great little gadget
@gsp3 жыл бұрын
Definitely 👍
@grahamwickendon5073 жыл бұрын
nice one . ordering some ✔✔✔✔✔✔✔
@gavinlangford29847 ай бұрын
Great video..I also have the same issue where the end of the canon does not sit directly above the reel spool..slightly over and most times when I cast the timing does go out and feels like I have let go too early. the cast is then fast and the line is released quicker and sooner so I have to releas later but even then it is out of my control and teh line springs off too quick and the cast is really short. I am thinking of experimenting by cut half of the back leg so there is just enough to whip it on at the back.. I could suggest that breakaway make the back leg shorter..apart from that what a great tool. If everything goes right for my on the day I can cast a lot further. They just need tweeking slightly
@gsp7 ай бұрын
I have cut the rear leg shorter on one of my vannons and it does work👍
@yokingtomcat3 жыл бұрын
good tips bro
@gsp3 жыл бұрын
Cheers mate👍
@Lycan_24_72 жыл бұрын
Thank you for explaining the differences in having this device placed in the forward and normal position. Have you seen where ScubaChris places this device more towards the side of the rod?
@gsp2 жыл бұрын
To the side would also work as long as the thimble of the cannon is in line with the spool. They are great devices
@Lycan_24_72 жыл бұрын
@@gsp I ordered 3 😁 to try
@scottsoutfishing3 ай бұрын
I've seen a few fit these at 45 degrees instead of directly above the reel.
@gsp2 ай бұрын
45 deg to the side is ok especially if you have long fingers and can reach round. I haven't so need it directly above the reel👍
@davidprobert82233 жыл бұрын
Thanks for the demo. I have used the cannon twice and each time i snapped off, what am i doing wrong? I have a Penn surfblaster 2 8500
@gsp3 жыл бұрын
It's very difficult to to understand what's going on without seeing the setup. What strength leader do you use? And do you have 5 - 7wraps of your leader on your spool
@davidprobert82233 жыл бұрын
@@gsp Thanks for the quick reply. I was using a 13ft Shakespeare Sigma Supra rod, no shock leader just straight through 30lb braid with a 4oz and 5oz lead on an open beach to test using the cannon, gave up after 2 casts.
@gsp3 жыл бұрын
@@davidprobert8223 30lb won't take the shock of a full cast with a 4oz lead. The cannon does allow you to compress the blank easier so you really are loading it up and as braid doesn't have any stretch there is no forgiveness and it's going to snap at the weakest point, which is probably where it is held on the cannon. As was use the rule of thumb that for every once of weight you want 10lb of breaking strain plus 10lb. So 1oz =20lb, 2oz =30lb, 3oz = 40lb, 4oz=50lb and so on
@davidprobert82233 жыл бұрын
@@gsp Thats really informative, thank you. I will get back out there (after lockdown) and give it a go, hopefully with better results, thanks again.
@stephengreenwood48853 жыл бұрын
Has anyone tried installing these using heat shrink tubing? Does it work/hold OK? Think it would look a lot better and last longer without the inevitable unwanted 'stickiness' of old tape.
@gsp3 жыл бұрын
Heatshrink wouldn't hold, the casting cannon would slip round but you could whip it on and put finish on it to make it look professional
@leerogers64233 жыл бұрын
Been toying with the idea for a while now so with time on my hands I'll give it a go. If anyone doubts what a line cut can do let me tell you> In 45 years as a chef I've had very few realy nasty cuts but a line cut is up there with the worst, it happens so fast that you can't react untill it's well into you , nasty.
@gsp3 жыл бұрын
Line cuts are nasty! I've cut through to my bone with a pair of secateurs! Believe me, that hurt!
@Elgun5773 жыл бұрын
what is the name of it
@Elgun5773 жыл бұрын
can you find it in online markets and post it here for me please?
@Elgun5773 жыл бұрын
hello, where can we buy this product online?
@gsp3 жыл бұрын
Just search breakaway casting cannon and there available at alot of different retailers
@Elgun5773 жыл бұрын
what is the name of it?
@gsp3 жыл бұрын
It's a " breakaway casting cannon". It's on amazon and ebay. Some call it a "breakaway cannon bionic finger" They have international shipping
@NoOne56488 Жыл бұрын
Oh i wonder why it was having issues with mine, i had it to far forward ffs. lol
@gsp Жыл бұрын
They're a great device but zero instructions with them🤦 glad it helped
@manchapkarm36263 жыл бұрын
Save money and use a glove
@gsp3 жыл бұрын
It's not the same at all, I can cast fine without a glove but this device adds a little extra security
@manchapkarm36263 жыл бұрын
@@gsp I been using braid with a glove , The black thin builders type never had a issue and thats putting full pendulem into the cast .
@stephengreenwood48853 жыл бұрын
Save money (£10 one off purchase) but use building gloves at £1 per pair which need laundering/cleaning and replacing at a frequency and include the faff of putting on and taking off to cast/bait up....
@manchapkarm36263 жыл бұрын
@@stephengreenwood4885 Fair point
@simonjackson7269 Жыл бұрын
A waste of money!! Just use a finger cot!
@gsp Жыл бұрын
Not at all they are great little devices
@farty1000 Жыл бұрын
Great channel I am a new subscriber! I started fishing in 2019, i have only ever cast with a cannon and I love em!! ...I was told on a forum because i have never used a finger stall and the old method that I am Gay ....This is something I have never had the courage to tell my wife 🙄😁
@gsp Жыл бұрын
🤣🤣 I better keep that from my misses too🤣🤣
@fugly728 ай бұрын
Great video, thanks for sharing, just got myself a couple of these your video helped me a lot. Keep up the good work. 🫡🎣🎣🎣