Segmented Wood Turning With One Amazing Ring

Рет қаралды 24,130

ThePapa1947

10 ай бұрын

I glue up one segmented ring and it becomes 5 rings before I am done.
Just another way to do a bowl from a board.
I use Maple, Cherry and Burnt Oak AKA Cambia Oak
I used Minwax Wipe On Poly and Acks Sanding Paste and Polish Restore Paste for the finish.
If you found this video entertaining
Please Like and Subscribe and Share if you are inclined
The video is for entertainment purposes only
You are watching how I do things and not suggesting others should do it the way I do.
You need to know your machines and how to use them. Follow how the manufacture says to use them safely.
Look up other turnings I have done:
Dizzy Twister Turnings Segmented Turnings
Feature Rings Staves
20 minute bowl
Great gift or a craft show sales
Star bowl Block bowl
Tumbling bowls Emerging Bowls Black Locust Vase
Droop Bowl Offset Bowl Barrel of Blocks Star Bowl Bowl in a Bowl
Droop Bowl Lathe modifications Lacquer Shellac Friction Polish
Abrasive Paste Polishing Paste Wipe on Poly Black Locust Hollow Form
Multi Axis Square Bowl Siberian Elm Hollow Form
Dodecahedron Soccer Ball Sphere Olive Wood Turnings Illusions Segmented Vase
Tangent Stave Turning

Пікірлер: 425

@user-tx1jt7ub7i 5 күн бұрын

That’s a lovely segmented bowl Gary let’s go for a shallow bowl with the other disc…keep turning Gary thankyou for sharing

@ThePapa1947 5 күн бұрын

Thank you Ronnie. I did make the shallow bowl. kzfaq.info/get/bejne/mK2Tha94vLPSZZc.html&ab_channel=ThePapa1947 Thanks for watching, Gary

@dmaschy599 Ай бұрын

I like that segmented bowel.

@ThePapa1947 Ай бұрын

Thank you very much!

@gerrysmith4493 3 күн бұрын

Please try a sallow dish !! As usual a nice job😁

@ThePapa1947 3 күн бұрын

Thanks Jerry. Already made it kzfaq.info/get/bejne/mK2Tha94vLPSZZc.htmlsi=0aFEqBoXRvk18IBF

@roym.1141 7 күн бұрын

Cambia Oak you mispelled it in the description. I had to investigate because I've never seen any type of oak that dark, absolutely beautiful!

@ThePapa1947 5 күн бұрын

Happy you found it. It is only dark because they burn it. Most people call it Burnt Oak but where I buy it they label it Cambia Oak. Thanks for watching. Gary

@thomasbone5498 10 ай бұрын

Very ibtertrestibg concept i do like that Bob england

@ThePapa1947 10 ай бұрын

Thank you very much Bob and thanks for watching, Gary

@theangrywoodturner9972 10 ай бұрын

Nice...yes a shallow one would be great

@ThePapa1947 10 ай бұрын

Thanks so much. I put it on the list. Thanks for watching, Gary

@joeysturgeon 10 ай бұрын

Turned out great.

@ThePapa1947 10 ай бұрын

Thank you Joey I appreciate you watching and commenting. Gary

@albertdawson6814 10 ай бұрын

I'm pretty sure I know we're they sent you in 1967. Welcome home. Thank you for your service. I enjoy your videos very much. Thank you for sharing. I hope to see you on the next one

@ThePapa1947 10 ай бұрын

Thank you very much Albert and I am guessing you were over there as well. Welcome how yourself if you were and even if you were not. Take care, Gary

@Zzrdemon6633 Ай бұрын

Shallow dish would be good to see how you cut that .

@ThePapa1947 Ай бұрын

Thanks and I have done it> kzfaq.info/get/bejne/mK2Tha94vLPSZZc.html

@gwynnfarrell1856 10 ай бұрын

Shallow dish, please. I can see the two as a nice set for serving salad and bread. Beautiful! Thank you, Gary

@ThePapa1947 10 ай бұрын

Thank you Gwynn and for sure I will be making something shallow out of the other piece. Thanks for watching, Gary

@tobyssawdust2498 10 ай бұрын

thank you for your service sir

@ThePapa1947 10 ай бұрын

Thank you very much Toby I appreciate that. Gary

@vinimarshall7301 10 ай бұрын

Really cool , love it 👍

@ThePapa1947 10 ай бұрын

Thank you very much Vini I appreciate your comments and thanks for watching, Gary

@gdreading9088 7 ай бұрын

Great video, thanks

@ThePapa1947 7 ай бұрын

Thanks so much. Happy you liked it and thanks for watching, Gary

@thimhol5486 8 ай бұрын

❤❤❤❤❤great job ❤❤❤❤❤

@ThePapa1947 8 ай бұрын

Thanks so much!

@user-vv6wu2fm4h 10 ай бұрын

Great work, I,ve made a jig similar to yours that I intend to have a go at making bowl from a board. thanks for the explanations.

@ThePapa1947 10 ай бұрын

Thank you Lionel and hope you have a great time making a bowl from a board. Gary

@tielkgate Ай бұрын

I liked your jigs. The bowl is great. From one Papa to another.... Lowell - aka Papa

@ThePapa1947 Ай бұрын

Thank you Lowell. Happy you enjoy my jigs. From one papa to another. Gary

@delbertbohm2039 10 ай бұрын

l like it l all way like they

@ThePapa1947 10 ай бұрын

Thank you Delbert, happy you liked it. Take care, Gary

@wudturner2 10 ай бұрын

I love to watch you turn segmented bowls and bowls from a board! This video is the best of both worlds!!! Thank you!!! I’d love to see you make a shallow bowl or plate with your extra blank!!!

@ThePapa1947 10 ай бұрын

Thanks so much Albin and a shallow turning it will be. Take care, Gary

@kenharper616 10 ай бұрын

Dish young man

@ThePapa1947 10 ай бұрын

A dish it will be. Young man??? Hey I like that LOL

@dougsmith7447 10 ай бұрын

Yes please ashallow dish

@ThePapa1947 10 ай бұрын

Thank you Doug and that is what it will be. Gary

@robertmiles388 10 ай бұрын

I would love to see you, make a platter out of that blank

@ThePapa1947 10 ай бұрын

Thank you Robert. Well looks like is the choice so far so that is what it will be. Thanks for watching, Gary

@pierregroleau9202 2 ай бұрын

I would li ke to see a planter,Goodyear job

@ThePapa1947 2 ай бұрын

Thank you Pierre! Well then here is is! kzfaq.info/get/bejne/mK2Tha94vLPSZZc.html

@edwardhand7070 10 ай бұрын

Thank you for your service Gary. My father was a survivor of the Vietnam war and was my real life hero. Happy turning my friend and thanks for your helpful explanation of everything that you do. 😊

@ThePapa1947 10 ай бұрын

Thank you very much Edward. I served in an infantry company in Vietnam from Nov. 67-Nov68 Happy you enjoyed the video. Gary

@denocro3586 10 ай бұрын

A great description of a bowl from a board Gary and a great result. Much appreciated. Cheers Deno

@ThePapa1947 10 ай бұрын

Thanks so much Deno and Cheers to you my friend, Gary

@kennethnielsen3864 10 ай бұрын

Thanks for sharing.

@ThePapa1947 10 ай бұрын

Thanks for watching Kenneth. Take care, Gary

@timbutler3733 10 ай бұрын

Cool jigs, thanks

@ThePapa1947 10 ай бұрын

Thank you Tim and thanks for watching, Gary

@zetuskid 10 ай бұрын

Gary, a platter would be nice.

@ThePapa1947 10 ай бұрын

It is in the line up and will get to it soon. Gary

@gregdagg9305 10 ай бұрын

amazing piece..👍

@ThePapa1947 10 ай бұрын

Thank you Greg and thanks for watching, Gary

@barry.w.christie 10 ай бұрын

Attempt number 12 ... let's see if this is deleted ..... I love this type of bowl, I think it's because it's a simple but effective method of making a bowl, not only that but it wastes very little wood, especially if you create it in this way ... it's a beautiful piece 😁 Yes, a shallow bowl version of this would be nice to see, showing how the angle you cut the rings at affects the overall shape of the bowl 👍

@ThePapa1947 10 ай бұрын

Thank you Barry. It was fun to do for sure. It would not have takes much more to have individual segmented rows but it would have take a lot more glue up. I think I have a final design for the shallow version. Thanks for watching, Gary

@donlewis5968 10 ай бұрын

Nice job. I would like you to make a shallow dish using multiple angles.

@ThePapa1947 10 ай бұрын

Thank you Don. I have started the design for a shallow bowl. In order to keep it shallow it would have to be just one cut. Each cut will add 3/4 of an inch. But I may consider cutting the thickness down. Hmm you just got me thinking. Thanks this just might be the answer. Gary

@chrissheathewoodguy 10 ай бұрын

Love it!! I think a nice shallow bowl would be very nice.. I wish i could get you a few of the rose wood cedar i've been turning. I think you would really Enjoy turning it..

@ThePapa1947 10 ай бұрын

Thank you very much Chris. Shallow bowl will be coming pretty soon. Rose wood cedar sounds very interesting. Thanks for watching, Gary

@mountainviewturning5319 10 ай бұрын

Looks great

@ThePapa1947 10 ай бұрын

Thank you Chris. Much appreciated. Gary

@DougMilleratWoodSpunRound 10 ай бұрын

Super nice.

@ThePapa1947 10 ай бұрын

Thank you Doug!

@jimbalz3017 10 ай бұрын

Great design! Great craftmanship! Clever jigs! Can't beat that!

@ThePapa1947 10 ай бұрын

Thanks so much Jim I appreciate your comments. Gary

@zetuskid 10 ай бұрын

Gary if I watch enough of your videos I might eventually learn to cut segmented bowls based on your instructions. Has nothing to do with your instructions but my comprehension. I just live to sit back and watch a master do his thing. Very relaxing and pretty soon the video is over and I hadn’t learned anything-just enjoyed the video. I’ve got to start paying attention!!! Thanks buddy.

@ThePapa1947 10 ай бұрын

Thank you very much my friend. I am sure you could figure it out. Just take one step at a time. Happy you enjoy my videos. Take care, Gary

@marycatherinelebouef-op4hf 10 ай бұрын

Wowza! This bowl turned out beautifully! I love these segmented bowls, the finish is perfect also. Great job!! Bravo!

@ThePapa1947 10 ай бұрын

Thanks so much Mary I appreciate your watching and commenting. Gary

@SilverBack. 7 ай бұрын

Gary it turned in to a wonderful bowl, I really like the extra bits as well, well done 🙌🙌🙌🙌🙌🙌🙌🙌

@ThePapa1947 7 ай бұрын

Thank you Douglas I appreciate your comments and thanks for watching, Gary

@davidhrutfiord2537 10 ай бұрын

Go for the shallow style. I'd like to see them stacked at the end.

@ThePapa1947 10 ай бұрын

Thank you David! That is the plan. Thanks for watching, Gary

@valeriehenschel1590 10 ай бұрын

Gosh, Gary! You just keep coming up with projects for me to try sometime in the future. My list was supposed to be getting shorter, not longer! 😵‍💫🤣🤪 And yes to a shallower version.

@ThePapa1947 10 ай бұрын

Well I would like to say sorry for adding projects to your list but I wont LOL. The things I add to my own list just keeps building. Just crazy ideas I want to try. I knew this one would work but put it off for a long time. I thought it was a pretty good trick in making a segmented bowl Shallow version is been requested and I think I have my final design. I had to change my drawing a few times till I figured out the easy way. Good thing I did it in my CAD program or I would have wore out the eraser on my pencil haha. Gary

@MikeHolton 10 ай бұрын

Beautiful bowl Gary, I'll never get tired of watching you make these. All the best and hope you can keep cool in the heat. Mike

@ThePapa1947 10 ай бұрын

Thank you very much Mikel It was a bit hot here again today but supposed to be cooling down. Take care, Gary

@rickhomer934 10 ай бұрын

Thanks for sharing some of your tips and jigs. I vote for a shallow bowl for the next one.

@ThePapa1947 10 ай бұрын

Thank you Rick. I have the swallow one all planned out now. Maybe in a few weeks. Thanks for watching. Gary

@mjrulez100 10 ай бұрын

Just love it. Well done.

@ThePapa1947 10 ай бұрын

Glad you enjoyed it Sue and thanks for watching, Gary

@robertpichora5881 10 ай бұрын

Would like to see a shallow bowl for comparison of details of cutting the rings.

@ThePapa1947 10 ай бұрын

Well Bob I put it on the list. It will be tricky to cut the rings though. But I will give it a go. Gary

@AndysCornishCreations 10 ай бұрын

Hi Gary... Really beautiful bowl with an amazing finish... I would like to see another bowl.. shallow this time.. perhaps without staggering the pattern... Instructive video as always... Take care my friend...All the best.....Andy

@ThePapa1947 10 ай бұрын

Thank you Andy. I also have thought about not staggering them. Staggering them does make the bowl stronger but I have done these types with only one layer so no stagger on those. But I have an option for making them strong enough. Not like it will be used for a Frisbee LOL.... I THINK! Take care, Gary

@georgevalente4223 8 ай бұрын

It does work. I first I calibrated the table saw blade to exactly 90 degrees. Trued up some scrap. Then added scrape to my table saw miter gauge extending it to 18". Then using an electronic/digital angle finder cut scrap until I got the miter gauge to exactly 67.5 degrees. This produced an 8 piece closed center segmentation....YES it can be done! Thanks Gary!

@ThePapa1947 8 ай бұрын

Yes it sure does!

@joshblumenthal4873 10 ай бұрын

Segments from a board, clever! Thanks for sharing the jigs. I usually catch the ring with a gloved hand, but it's not for everyone and the backer is an excellent idea, as is the right angle. Quicker than using a square each time.

@ThePapa1947 10 ай бұрын

Thank you Josh. I am sure catching with a gloved hand is working fine for you. Myself I like to keep both hands on the parting tool as they can grab at any moment. So because of that I would not recommend catching the ring to anyone else. But it seems to work for you. Not trying to be the safety police but some people have a thing about gloves and moving objects. I got called out for wearing and apron at the lathe even though I wore one all my working days as a wood patternmaker.

@carolriley8472 10 ай бұрын

The bowl really looks cool with all the segments. I love how easy it was using the "Bowl from a Board" method.

@ThePapa1947 10 ай бұрын

Thank you very much Carol. I have been thinking about doing this for at least 5 years. It was fun to do and sure was easy to get that many segments. But the down side is if you make 5 separate rings you can have about any shape you want but this way you are limited. Take care, Gary

@pattybeeler9003 9 ай бұрын

I love all your segmented bowls. I would take every one of them. You could sure sell them.

@ThePapa1947 9 ай бұрын

Thank you Patty and I am sure I could sell them but it is hard to do. I get pretty attached to a lot of them. But I really should figure out a way to sell some as I am running out of room and my wife says 20 turnings on the dinning room table is a bit much LOL. Thanks for watching, Gary

@jonmartineau1004 10 ай бұрын

Gary , that is one impressive looking bowl ! Can you believe the heat we have been having ? It sure makes it hard to get in the shop ! You are the master of segments ! Have a great week ahead !

@ThePapa1947 10 ай бұрын

Thank you Jon. They say it might rain this Wednesday..we shall see. I wait till happens before I predict the weather around here LOL. Take care, Gary

@andrewsiloudon7286 9 ай бұрын

great option to make a lovely bowl. I liked the precision of the 45 degree cutter

@ThePapa1947 9 ай бұрын

Thank you Andrew. It does do a good job. Thanks for watching, Gary

@jaydee5447 4 ай бұрын

Dude, this is fantastic. So cool and beautiful at the same time. Exceptionally well done. I really like this piece. And hopefully you make the dish with the second one.

@ThePapa1947 4 ай бұрын

Thank you Jay and I did make that dish not long after I did this one. kzfaq.info/get/bejne/mK2Tha94vLPSZZc.html Thanks for watching, Gary

@mvecellio1 10 ай бұрын

I think that is the best one yet. I like the dish Idea. I make 10 inch bowls and always stop at 3 rings. Makes a great serving dish. Now, down to the shop to give it a try.

@ThePapa1947 10 ай бұрын

Thank you very much! I like 3 rings as well as it can leave a much wider bottom and maybe be more useful. Have fun in your shop. Gary

@GordonRock1 10 ай бұрын

Absolutely gorgeous bowl, Gary! Love it, my friend. I look forward to seeing what you do with the other piece. Take care, …..Gord

@ThePapa1947 10 ай бұрын

Thank you Gord. This one I set out to do just what I did. Now the other blank is going to take some thinking. And you know us old guys are only allowed to think a little bit everyday or we will get in trouble LOL But I do have to ideas sketched up so it will be coming soon. Hope you are doing well buddy! Take care my friend, Gary

@alangibb3100 10 ай бұрын

Garry, that turned out absolutely fantastic mate, its not the time of year for long johns lol. Great job.

@ThePapa1947 10 ай бұрын

Thank you Alan and for sure it is not the time of year for long johns around here. Thanks for watching, Gary

@williamellis8993 10 ай бұрын

Really nice bowl, Gary. Another successful experiment. Great tips for the woodturners, too. I vote for the shallow dish. Bill

@ThePapa1947 10 ай бұрын

Thanks Bill...shallow dish it is. Gary

@MadonnaThornton.Woodworks 10 ай бұрын

Beautiful segmented bowl Gary. Thanks for the video!

@ThePapa1947 10 ай бұрын

Thank you Madonna and thanks for watching, Gary

@copperowlwoodturning5929 10 ай бұрын

Beautiful bowl, Gary. Very cool pattern and great explanations. Thanks. 😊😊😊

@ThePapa1947 10 ай бұрын

Thank you Rob. Happy you liked the video and thanks for watching, Gary

@JamesBoyettPops 10 ай бұрын

Love the extra features section -- "the rest of the story" as Paul Harvey would say!

@ThePapa1947 10 ай бұрын

Thank you James. I was hoping that the last section would get watched. Thanks for letting me know. Gary

@ThePapa1947 2 ай бұрын

kzfaq.info/get/bejne/fdSqjLVn3pq-mIE.htmlsi=bcaBqut9t8Z-ZQDo. This was the first one.

@peggybrown5806 10 ай бұрын

Yes! Do the platter! Very cool bowl!

@ThePapa1947 10 ай бұрын

Thank you very much Peggy. I have been working on how to best use the wood to make a platter. Coming soon. Thanks for watching, Gary

@skipflorey2511 10 ай бұрын

Gary, I really like the design. The finish looks terrific. The shallow dish is a good idea👍

@ThePapa1947 10 ай бұрын

Thank you Skip, for sure a shallow dish it will be. Gary

@bobhoffman8717 10 ай бұрын

Very nice 👍 as always you jit it out of the park. Yes would love to see the shallow dish Keep the videos coming

@ThePapa1947 10 ай бұрын

Thank you very much Bob. For sure I will do what I can to "turn" it into a dish. Gary

@glencrandall7051 10 ай бұрын

My first bowl (1975) was a bowl from a board. The rings were cut with a Jig Saw. By your standards the cuts were a mess, but useable. I still have the bowl. It was from a piece of 1 x 12 mahogany. Still looks pretty good. I sure wish I had known of your methods and fixtures back then. It certainly would have been easier. Thank you for sharing. Have a great day and stay safe.🙂🙂

@ThePapa1947 10 ай бұрын

Thank you Glen. My first one was made on my band saw making half rings. Way to much work gluing the halves together so I decided to try this and it works. The fixture for catching the ring has become my favorite fixture I have come up with. No doubt someone will copy it and have it for sale. That has happened with other things I have come up with. But it is so easy and cheap to make most of the things I come up with. I am all about saving money when I can. Take care, Gary

@Bren72 10 ай бұрын

Beautiful once again. I like the plater idea. Thanks for sharing your knowledge Gary.

@ThePapa1947 10 ай бұрын

Thank you Brenda and I have added the platter to the list. Thanks for watching, Gary

@kam70111 10 ай бұрын

Yes please the shallow bowl. Beautiful.

@ThePapa1947 10 ай бұрын

Thank you Khan and a shallow bowl is being planned. Take care, Gary

@beardedwoodpecker 10 ай бұрын

Excellent as always :) Thank you for the bonus section All the best Yiannis

@ThePapa1947 10 ай бұрын

Thank you Yiannis, happy you enjoyed the video. Take care my friend, Gary

@CowboyDave1812 10 ай бұрын

Now, this is closer to my own style of woodworking... by all means, do the next one at a more shallow angle... Every yootoober that demonstrates the "bowl from a board" technique uses the same 45 degree slope. Would be interesting to see something more unique.

@ThePapa1947 10 ай бұрын

Thank you Dave. I have a few videos showing changing angles on the cut can give you a curved side. This is what I will be doing with the shallow bowl. I do it by using multiple angles. Here is a link to one of them. kzfaq.info/get/bejne/ZuB6n9aB2LSvqIE.html&ab_channel=ThePapa1947 Thanks for watching, Gary

@laurazakrzewski 10 ай бұрын

Great segmented bowl Gary. Your next one could be the platter type. So we can see the differences between the 2. Love the bonus section.

@ThePapa1947 10 ай бұрын

Thank you very much Laura. I am working on it right now. Not going to be as easy as I would like but I will get something for sure. Thanks for watching, Gary

@keith1542 10 ай бұрын

As usual, beautiful work and well explained. I miss wood turning. I haven't done it for a very long time. Thank you for the memories.

@ThePapa1947 10 ай бұрын

Thank you Keith. It is something I really love so I understand how you miss it. Gary

@Ronalcock1 10 ай бұрын

Thanks Gary your work is always inspirational.

@ThePapa1947 10 ай бұрын

Thank you Ron I appreciate you watching and commenting. Gary

@JordanWoodwerx 10 ай бұрын

Beautiful piece Gary, love all the jigs too! 👍🏻👍🏻 as always buddy!

@ThePapa1947 10 ай бұрын

Thank you Bruce I appreciate you watching. Take care, Gary

@WoodenItBeNice 10 ай бұрын

Amazing bowl Gary. The pattern reminds me of Cartoon Lightning Strikes. I love the 2 additions as well. Take care my friend. Hwyl, Huw

@ThePapa1947 10 ай бұрын

Thanks Huw. Lighting strikes can be pretty. If they are not too close LOL. Take care my friend! Hwyl, Gary

@jimdaly5077 9 ай бұрын

Hi I think the dish would be the wish of your followers, great bowl.👍🌞🐝

@ThePapa1947 9 ай бұрын

Thanks Jim. Stay tuned 😎

@paulrapp613 10 ай бұрын

Papa, Another wonderful creation from your fertile imagination! Very nice indeed. But there is a bit of a problem; I’m dizzy! Some of your segmented works do that to me. Fear not, I’m not driving. And I haven’t been drinking 🫣. I’m sitting in my recliner heaping praise upon an exceptionally talented wood turner. Thank you for a delightful interlude in my otherwise slothful 🦥 day. Keep the aspidistra flying! God bless, Paul

@ThePapa1947 10 ай бұрын

Thank you very much Paul. Sorry about being dizzy but at my age I cant tell anymore LOL. Thanks for watching my friend and God bless, Gary

@markv1027 10 ай бұрын

The bowl looks great! I think a shallow dish would cool. Thanks for the video.

@ThePapa1947 10 ай бұрын

Thank you Mark. For sure it will become a shallow dish. It is on the list. Take care, Gary

@spiritwynd 10 ай бұрын

Your work is always beautiful Gary, and you sure didn't disappoint with this one! I'd like to see a shallow serving dish with the other segments. Using the same pattern, you'd have a set!

@ThePapa1947 10 ай бұрын

Thank you Heather These are fun to do and I do plan on making the dish. Been busy today but looking forward to seeing what this pyramid is you are turning. Gary

@Captkid1 10 ай бұрын

Nice segmented bowl. I think a platter and bowl combination would look really great.

@ThePapa1947 10 ай бұрын

Thanks so much and a platter/plate will be coming. Gary

@paulsandeen2754 10 ай бұрын

I still have not made a fixture for doing a bowl from a board, but it is on my list. Living in Ariizona, it is hard to work in the garage when the temperature is over 110, and this is the 21 day in a row that it has been this way. So I just sit back and enjoy your vedio's Nice bowl, wonder what it would look like with all segment in sapele.

@ThePapa1947 10 ай бұрын

Thank you Paul. Our son and his family have been visiting her family in Arizona and text me it was 117...yikes. When it reaches 100 here I am done for sure in the shop. Well 85 is my limit. Stay cool, Gary

@ThePapa1947 10 ай бұрын

Oh and it would look great using all Sapele!

@stevedraper3010 10 ай бұрын

Gary, another great creation. I'd love to see a shallow bowl from your other board.

@ThePapa1947 10 ай бұрын

Thank you Steve and I do believe I will need to do that soon. Most everybody has wanted to see it as well. Take care, Gary

@K31swiss 10 ай бұрын

Cool

@ThePapa1947 10 ай бұрын

Thank you very much and thanks for watching, Gary

@STMwoodturning 10 ай бұрын

Looks pretty cool Gary! I also like the idea of making the second set of segments into a platter. Stuart

@ThePapa1947 10 ай бұрын

Thanks Stuart. I came up with the final design for the platter/dish this morning. Thanks for watching, Gary

@STMwoodturning 10 ай бұрын

@@ThePapa1947 looking forward to it! 😀

@harrykeel8557 10 ай бұрын

Very handy jigs. The right angle one could possibly be used for other projects. Great looking bowl, one done as a platter would work, in looks just as well as the bowl.

@ThePapa1947 10 ай бұрын

Thank you very much Harry. I am in the design stage right now. Coming soon. Thanks for watching, Gary

@richardcollins8130 10 ай бұрын

Loved the video and I think you should make a shallow dish. They would go with each other. Thank you for sharing your knowledge.

@ThePapa1947 10 ай бұрын

Thank you Richard. I am working on a few designs for a shallow bowl right now. Thanks for watching, Gary

@itessellate4440 10 ай бұрын

Beautiful work! Love those three colour woods, they work great with the geometric patterns! such simple methods that create very complex looking shapes!

@ThePapa1947 10 ай бұрын

Thank you very much! It is one of my favorite combinations of woods to use. Thanks for watching, Gary

@patrickmoran2489 4 ай бұрын

shallow dish please and after that a platter. Nice bowl, & I liked all your jigs as well.

@ThePapa1947 4 ай бұрын

I did that not lomg after this one. Thank you very much and sorry for the late reply. Had an ankle injury. Gary

@tobyssawdust2498 10 ай бұрын

very good ideas

@ThePapa1947 10 ай бұрын

Many many thanks Toby and thanks for watching, Gary

@PhilAndersonShadyAcresWoodshop 10 ай бұрын

You've got this down to a science, Professor! I can tell just watching that it's become second nature to you. I'm sure explaining it to your audience slows the process down quite a bit. This was a joy to watch, my friend! You make it look easy-peasy! As for the bowl, it's gorgeous as always! The segments are perfect, the turning looks great and the finish is superb! Great job, buddy, keep'em coming! 😊 Phil

@ThePapa1947 10 ай бұрын

Thank you very much Phil. I guess you could say segments are in my blood. More like stuck in my head though LOL. I do like making these but what I finished today blows the socks off this one if I ask myself. All nature in this one. I am still on cloud nine after seeing the beauty we have been given. Well that is all I can say for now...you will have to watch next week LOL Take care my friend, Gary

@Redthumb45 10 ай бұрын

Very nice work!! And YES, I would love to see another variation.

@ThePapa1947 10 ай бұрын

Thanks so much and the other one will be coming soon. Take care, Gary

@billm2158 10 ай бұрын

Great execution Gary. I, too, have been using polyurethane to seal the wood before polishing. I use regular poly from a can, put on with a cloth, it builds faster than the wipe-on. I then polish with a buffing system, ending with carnauba wax.

@ThePapa1947 10 ай бұрын

Thank you Bill, I have used the regular poly but I find the wipe on to be easier to get a very smooth finish. It does take more coats but in this weather it happens pretty fast. I do not have a buffing system and I am sure that would help if you were using the regular poly. Thanks for watching, Gary

@randy9293 10 ай бұрын

I'd like to see a shallow dish. I love watching this segmate Turning !

@ThePapa1947 10 ай бұрын

Thank you Randy. I just came up with a plan the shallow dish. Coming soon. Take care, Gary

@randy9293 10 ай бұрын

@@ThePapa1947 You're welcome waiting waiting to see the next one

@oneturnatatime6309 10 ай бұрын

What a beautiful piece! Excellent work Gary👌

@ThePapa1947 10 ай бұрын

Thank you very much Jojo...happy you enjoyed it. By the way I just checked out your channel and left a comment. Take care, Gary

@garyp8471 10 ай бұрын

You do make these segment turnings look very easy, might of mentioned that before mind, looks great cracking finish, we would like to see a platter out of the other piece. How's that shoulder coming on now. All the best from Lincolnshire UK

@ThePapa1947 10 ай бұрын

Thank you Gary and I have the platter on the drawing board. It will be a little tricky but should work. Shoulder is getting better but have my bad days. Next Thursday they are giving me a new exercise to focus on what is causing the pain. Needed to build strength up around it first. Thanks for watching, Gary

@user-gh7do9xh3y 10 ай бұрын

Very nice bowl. I am from richmond bc and am wondering where you find burnt oak? I really admire your ingenuity

@ThePapa1947 10 ай бұрын

Thank you Dave. there is a local hardwood store where I live called Crosscut Hardwoods. It is called Cambi Oak and also referred to as roasted oak by some. It is red oak that is roasted in an oven till almost burnt. My understanding is it will make it so insects do not like it. Thanks for watching, Gary

@ianspicer3885 10 ай бұрын

Another stunning piece Gary 😍

@ThePapa1947 10 ай бұрын

Many thanks Ian! Take care, Gary

@JohnFerraro 10 ай бұрын

Looks awesome, Gary. Great project. 👍

@ThePapa1947 10 ай бұрын

Thanks so much John I am happy you liked it. Take care, Gary

@user-gr8wy2ez1v 10 ай бұрын

Wonderful way to make a segmented bowl. I think the platter/shallow dish would really look cool also. Your method is a great way to cut down on sawdust and get a better yield from the wood.

@ThePapa1947 10 ай бұрын

Thank you Dick. The other disk has not heard but it will now become a shallow dish. Thanks for watching, Gary

@ianm6891 10 ай бұрын

Gary, really love your videos, especially the details, tips and insights you provide. I think your ring cutter is awesome. I looked on tinker and, searched for projects you uploaded,found several you’ve shown in your videos, but not the ring cutter. I do hope you’ll consider adding that, as it is really looks so much safer than using the bandsaw method. I’ve been watching your videos and am truly inspired to get back to the lathe and rekindle my love of turning. My suggestion for the 2nd board, is figuring a way to make the bowl from the board not the typical 40/45 straight angled sides, but rather curved, with a larger ratio base, so not so easily tipped over. Thank you again, such great work! Ian

@ThePapa1947 10 ай бұрын

Thank you Ian. Try looking again I may have just made it public. The second glued up disk will be much different than the first for sure. Thanks for watching, Gary

@ianm6891 10 ай бұрын

Thank you very much Gary! FYI, if others wish to find your projects on tinkercad, they need to search for your avatar, not projects. Only a few of what you have shared shows up searching in projects. Again thank you very much. Longing forward to your next video.

@jaeography 10 ай бұрын

Beautiful job on the project today, I really enjoy the commentary during the videos, very educational. Thanks

@ThePapa1947 10 ай бұрын

Glad you enjoyed it Gary and thanks for watching. Take care, Gary

@barryerdman6285 10 ай бұрын

The whole video is awesome. If you make a shallow plate or platter the design will be much less interesting but I am certain anything you do will be impressive!!

@ThePapa1947 10 ай бұрын

Thank you Barry. Yes that is my concern that it will look like a flattened out version of this one. But maybe I can do something with it. Thanks for watching, Gary