Sentinel X100 Inhibitor Added Via Magnaclean 2 Pro. Sentinel X100 is available on Amazon amzn.to/2UauvYc
Пікірлер: 26
@andytsang3239Ай бұрын
Nice video. Just wanted to add that you can drain the water from the Magnaclean via a drain plug that's at the bottom of the housing. Yours might be difficult to access as it's installed quite low but it can be opened with the other end of the lid spanner you use in the video instead of using suction device.
@fiveminutemanАй бұрын
Coolio👍💪
@LBUK.2 жыл бұрын
Is there a chemical where that I can just leave in the system for some time? Or does every chemical needs taken out after a few weeks?
@fiveminuteman2 жыл бұрын
Not sure, im a diy'er so best get on screwfix and have a read up.👍
@Brandon-ko3rf3 жыл бұрын
I’ve read about this product. Do I need a plumber to add this to my combi boiler or?
@fiveminuteman3 жыл бұрын
I would advise you get a plumber.
@olpallix2 жыл бұрын
Hi there. Just wondering. Once you have put the cleaner in. Shouldn’t one do a drain of the whole system after a week to get rid of all the gunk instead of having it run around your system for months? Even though the magnaclean gets rid of the magnetic bits it doesn’t attract the sludge Cheers for the vid ☝️
@fiveminuteman2 жыл бұрын
Flush it out, replace with inhibitor.👍
@zakariyanakhuda80164 жыл бұрын
Hi will the boiler lose pressure when the boiler is switched off and after adding sentinel?
@fiveminuteman4 жыл бұрын
It will only lose pressure if you remove some water from it.
@ioanvioreldragoslav99284 жыл бұрын
So what does this X100 after a week or a month? Please show us the same part of your circuit after some time! :>
@fiveminuteman4 жыл бұрын
I'll whip my pipe out and show how clean it is.
@ioanvioreldragoslav99284 жыл бұрын
Thank you very much! :> And... what happens to the unwanted sticky stuff ? How is it... disappearing? :-?
@St.1113 жыл бұрын
How does your sticky stuff dissappear after you whip your pipe out.😂😂😂
@Brandon-ko3rf3 жыл бұрын
Ah, from the looks of it you’ve added it via your filter.
@fiveminuteman3 жыл бұрын
Via the filter it's easy or you can get aersol cans that dose via a radiator.
@musicas539124 жыл бұрын
Hi, would you take the same steps with sentinel X 800?
@musicas539124 жыл бұрын
The video was as straight as you can get..thanks
@easternise3 жыл бұрын
Two questions. 1. Do you have to drain one radiator in order to make space for the inhibitor? 2. Does 1L fit in the filter without draining down a radiator?
@fiveminuteman3 жыл бұрын
Depends what system you have, but the way i did it was to empty the magnaclean of water once isolated. You can then fill approx 500ml then put everything back on and repeqt process again to get the 2nd 500ml in.
@fiveminuteman3 жыл бұрын
Thanks for that.cheers
@fiveminuteman3 жыл бұрын
No worries mate
@noelbourke51012 жыл бұрын
The pro 2 filter will take a full bottle of cleaner/inhibitor,not sure if micro 2 can
@dw87502 жыл бұрын
Noel Bourke don’t listen to this comment , it does not hold 1L as per the commenters question. It’s about 500ml any more and it overflows when reassembling