Senville LETO 12000 BTU Series Mini Split Air Conditioner Heat Pump

Senville LETO 12000 BTU Series Mini Split Air Conditioner Heat Pump - Install & Review

Рет қаралды 37,112

Жыл бұрын

Senville LETO 12000 BTU Series Mini Split Air Conditioner Heat Pump
B00UV3LGUE
About this item
ALEXA ENABLED: Use voice or app control to control your air conditioner from anywhere. Use routines to adjust temperature settings while you are away and enjoy energy savings of up to 40%.
4-IN-1 MINI SPLIT SYSTEM: With air conditioning, built-in heat pump (up to 5F/-15C), dehumidifier, fan and turbo function. DC Inverter, UL Listed, AHRI Certified, Works with Alexa
DESIGNED FOR HOME & BUSINESS: Powerful performance and dependable durability with high quality design for an attractive appearance. Great for bedrooms, additions, living rooms, and even commercial applications like stores, restaurants and warehouses.
WHAT’S INCLUDED: Includes indoor air handler, outdoor condensers, remote control and installation kit with 16ft. line set and communication wire. Pre-charged with R410A refrigerant for up to 25 ft. Important note: requires professional installation.
5 YEAR WARRANTY: Backed by an industry leading manufacturer’s warranty, with 5 years on parts replacement and 5 years on compressor. Trusted quality and design by Senville, with free technical & installation support included.

Пікірлер: 41

@Atony-ig1mv Жыл бұрын

Senville LETO 12000 BTU Series Mini Split Air Conditioner Heat Pump See On Amazon (US)► products5s.com/2023/07/b00uv3lgue.html See On Amazon (CA)► smartsproduct.com/b00uv3lgue

@matthewmarkwood8848 10 ай бұрын

Just installed this exact unit today and this video was way more help than the instructions that came with the unit.

@oneshot_onekill4618 Күн бұрын

Do you happen to have a link to the fuses that work for that shut off

@Codysworld405 Жыл бұрын

Great install, very clean and thorough! I like the lines in the wall looks better.

@vicmcmanus6856 Жыл бұрын

A lot of great info. Very helpful and instructive. I think you helped me make up my mind on the brand and model I will purchase. Thanks for putting this video together.

@jimbo8743 Ай бұрын

That dude’s beard is going to catch fire 🔥

@123mjolie 9 ай бұрын

Thank you for your video!! I really appreciate it!!!

@mikeboy9290 Ай бұрын

What about putting the lines in a vacuum

@user-ql1wq1cm6t 6 ай бұрын

Thanks for the video. Really appreciate it.

@oneshot_onekill4618 Күн бұрын

What fuses are you using? Any link

@shhhhmeeeeeeeeee2368 11 ай бұрын

always take vacuum lines off with refrigerant fully in the lines if u take off before introducing refrigerant into the system when taken off the adapter it will suck in air if you do it the other way refrigerant will blow out of the Shrader when removing

@therookie3445 3 ай бұрын

That's what I like to see... a person who thinks outside the box, totally unencumbered by the instructions.

@jlg8689 9 ай бұрын

22:58 what adapter is that as i am having a hard time connecting my r410a manifold gauge set to that low side to perform an evacuation?

@Myfiddles 10 ай бұрын

DO NOT USE THREAD SEALANT!. Sorry to be so loud but I worked at refrigeration systems for 47 years and I know what I am talking about. The refrigerant metering device in any refrigeration system has a pin hole opening that will freeze and or simply plug solid if even a very small drop of this sealant gets into the system. This can can cause very major repair problems. If you feel the need to lubricated your flare fittings use only a small amount of refrigerant oil.

@Angel-mp6xu 8 ай бұрын

Nylog

@euromo7 8 ай бұрын

Do your research before jumping the gun. He’s using the right stuff, problem is when you over apply it. “NYLOG BLUE is synthetic ester oils fully compatible with all systems including those based on PVE oil, HFO refrigerants and CO2. Will Never Harden or Dry Will Not Clog or Contaminate Systems Fully Compatible and Miscible Used and Recommended by OEM’s

@tigertom53 7 ай бұрын

How would you know if this happened?

@oliviergagnon4130 10 күн бұрын

Super cool video thanks sir

@eloyanzaldua7180 5 ай бұрын

Great job 😊

@tinytim71301 11 ай бұрын

Well Done!

@simplyidiotic1 7 ай бұрын

I’m curious, if there was a potential leak that you detected, why did the vacuum hold so well?

@Colorado_Chris 26 күн бұрын

Nobody seems to show how you run the signal cable through the grey conduit. The signal wire runs with the refrigerant lines so where do you all of a sudden transition to the grey conduit?

@ricklndn 8 ай бұрын

In heat pump mode, how many watts dose it use ?

@Cam-wi3tp 10 ай бұрын

Confused about you cutting,flaring and vacuuming the lines. From what I read on their website, it says "These units come pre-charged with R410A refrigerant and include the necessary piping for installation and hook up" which to mean they are like Mr Cool units, just hook up, open valves and you're done. Thanks for vid!

@beauxbrasseur3164 9 ай бұрын

Precharged is different than vacuumed. I have the same unit and you need to vacuum them.

@richieschmidt6225 8 ай бұрын

The refrigerant is self contained in the outdoor coil, NOT the lineset. So after plumbing your refrigerant lines and properly tightening the flares, and pulling a deep vacuum, you then open the outdoor unit to allow refrigerant to flow.

@seanamos9441 11 ай бұрын

Amazing! my only question is since you shortened the lines, you did not account for less refrigerant. Is that a big deal or is it not enough of a change to have to worry about. This is going in my garage!

@Chief2414 11 ай бұрын

How’s ur mini split doing ?

@kbwildin11 6 ай бұрын

Did you need to purchase a disconnect box?

@energymarketchile 8 ай бұрын

Update on how is going?

@AnyKindaWay 11 күн бұрын

link for insulator pads?

@brianreip411 17 күн бұрын

How many amps is this unit?

@muhan8276 4 ай бұрын

I mean where did you buy😊😊

@muhan8276 4 ай бұрын

You both it where?😊

@wiley0714 10 ай бұрын

Woah? Heres a question. Thats a 115v unit. You have a disconnect wired for 220v. You had a black line, and a white (should be marked black or red tape on the white line as it is 120 volts). That power is going to the unit to the line/neutral and ground. Line (black or red) but your neutral is a white wire...the same white wire from the disconnect's power? That is def a mistake. The neutral should be spliced in the disconnect box, not, carrying power. Your send 120v thru the neutral to the load center which should be bonded to ground.....

@Anahernandez-hq8bn 9 ай бұрын

Buena observación

@tinysparky 8 ай бұрын

It is correct. I believe that the 9000btu unit has 240v going to the compressor outside, then it runs a 120v back up to the indoor unit from the outside unit.

@J.PROJECTZ 11 ай бұрын

I connected it mine the same way and my exterior compressor is not working 😢

@wiley0714 10 ай бұрын

Probably because he has a 240v disconnect going to a 120 unit. His wiring is wrong. A. If his white neutral line is carrying power, then it is carrying another 120 V through the disconnect through the neutral line on the unit or. B. He has a neutral running through the disconnects. (Line) and the neutral should just be spliced together, not running through the fuse in the disconnect....

@J.PROJECTZ 10 ай бұрын

@@wiley0714 I took care of mine it needed it’s own line I was getting power from a gfi 😆