That is a masterpiece. Separating silver and palladium is a true pain in the arm. I tried it several times - not your process - and I never got the Pd really clean.

Wow! Is Master klass, very good OwlTech!👍🤗👍

You do cool stuff! 👍👏

You could have just poured the silver solution into a container with some large pieces of copper pipe or copper plate in it. The silver would have cemented out on the copper leaving a blue copper solution behind. That copper then gets recovered by pouring it into a container containing iron pipes or plates for the copper to cement out on. Doing that takes more time, but it is a heck of a lot cheaper and the yield is the same

Thank's for this very usefull video.

Excellent work by a specialist.

I don't like adding a base randomly to nutralize a solution the better way is to do a titration process

Exelent mate, you ar the master of refining universe!

OK then, sodium formate looks very neat and easy to prepare... I will give it a shot...

Супер метода! Лрви лайк!

Muy buena explicación. Felicidades

Why don't all your beakers have OwlTech written on them? 😂😂😂

Hello Owltech, i just want to know is it possible recover palladium from 50% scrap silver after dissolving that scrap silver into nitric acid?? And why not you using dmg to seperate palladium from silver nitrate??

Well, since you mention it, I haven't found any tin recovery from acid, piling up pcb's here and wondering if i can just have them in acid bath till tin is dilluted then wash it with water and leave it aside for other treatments. I haven't found anything to then extract the tin, since it adds a lot of the weight of any pcb it would be good to know.

Excelente.

Thanks for sharing. This has really helped out.

Good job friend.

Great video! Should sodium hydroxide also work instead of potassium hydroxide?

That is electrical contact alloy for electrical relays. A much easier way to do it is to put the solution in a rbf and distill off the excess nitric acid then when most of it is gone add distilled water enough to dissolve. Next heat and add salt water to it. The silver will precipitate as a white chloride and the palladium will stay as a mix of chlorides. The rest is simple reduction or eletrotwinning. Silver can be reduced to metal with hydrogen or methane. Also the silver purity from this method is extremely high 4N or better. The contact alloy is generally 90 to 95 percent silver balance is palladium and copper. 🤓

Again one great video. One question, adind sodium carbonate until what ph? Or until clouding? Before adind Ascorbing Acid, thank you very much for all your knolege sharing with us..

SUPER.!!

Great vid as well as the whole series. Thanks OwlTech!!!! How did you come across silver and palladium alloy? Edit: Oh, I see. Is it typical for relays, or is it particular kind that contains silver and palladium?

размешивать ртутным термометром это мощно!

Owl, how do you know the dissolving palladium with hydrochloric acid from silver and palladium oxides is complete?

Can you please tell me what is best for gold recovery from CPU's, cupellation method or Aqua Regia method?

Just. a question. you told hydrocloric acid will dissolve palladium and the silver will not dissolve .up to here ok later palladium precipitated up to here ok later the precipitant washed with hydrocloric acid .in this time will palladıum dissolve

Добрый день! В промежутке что добовлял в сухом виде?

What about separation from an ore sample? Crushed rocks containing palladium and nickel?

You could have just hydrochloric acid to the nitrate solution and it would have gone the same

Good sir

OwlTech, why won't you precipitate silver chloride from the original nitrate solution and be left with dissolved palladium chloride?

Hola.. tengo una consulta.. si tengo nitrico con cobre y plata en solución... si le agrego el formato de sodio.. precipitaria solo la plta o también el cobre precipitaria? .. quebtecnica me aconsejaría? Muchas gracias

Thank you so much! This sure looks like the safest route. I don’t like the idea of breathing chlorine gas. I just need to recover Palladium from Silver alloys.

Привет бро! Класс!! 😁👍👍👍👍

También la manguera va colocado de un tambor con agua...?

احسنت فيديو رائع جدا

Thanks for vidéo

Good job

Интересный метод , только долго, и накладно, много реактивов, а за работу лайк!!!

good😅😅

You can use simply drop the copper metal into the solution instead of sodium formate to pricipitate the silver. Why would you use sodium formate?

Hi Louis, we have grams of palladium in solution .but we can't separate the palladium. We just collect gold and silver. What can we do!!?

Türkçe diline çevirimisiniz teşekürler kardeşim kolay gelsin usdam

Sehr schönes video.

hello, what is the white crystals you add after pouring the liquid hidroxide?

Very long time back I m always waiting

Hello...If you have a mix of Ag and Pd, why not first precipitate Silver with HCl and then doing your way with KOH/Formic?

This method serves to treat MLCC's?

Nesecito aprender cómo separar el paladio

just wondering, how do you handle/dispose of all the chemical byproducts/waste created during these processes?

What components did you start with for the silver and palladium ??

never drink the orange juice

Wow!

Hi , thank you for the video to increase the ph level with sodium carbonate (what ph level has to be achived) also after that you say (adding more ascorbic acid) in which process and aprx. How many grams need to be added and what after that the ph level has to be reached.thank you

Why you didn't use hcl to precipitate silver?

Sorry, I want to ask, isn't the palladium precipitate that you precipitated dissolved in hydrochloric acid, but why did you wash it with hydrochloric acid? please explain sir

Hi thank you for your video. Can i use sodium/potassium hydroxide if the solution contain copper ? And if i Use sodium formate to reduce silver nitrate but the solutions contain copper it's ok ?

I can use NaOH instead of KOH?

Добр день варёнка шока какое число пор?

good teacher I have palladium and rhodium I want to know how I get it have a good material

Kalau bisa nama kimianya ditampilkan langsung dilayar berikut ukuranya...👍

Sodium hydroxide works as well?? Or only potasium hydroxide?

با سلام خدمت شما دوست عزیز لطفا ازین ویدئو های آموزشی بازیافت پلاتین و طلا با ترجمه و یا زیرنویس فارسی بذارید تشکر

How to purify rhodium sponge.

O paládio e atraído pelo ima ? a prata sei que nao e, então depois do processo da para fazer a separação pelo ima

Hello what should be the pH when you add sodium carbonate before formic acid?

اتمني ان يكون الفديومتوجم للعربيةللمشتركين علي الاقل

Hola.. como estas? viendo el video tengo algunas consultas-1 cuanto carbonato de calcio agrega al cloruro de paladio para subir el PH y a que PH esta apuntando conseguir?-2- Para formar el formiato de sodio a partir de Carbonato de sodio y acido Formico.. cual es la relacion de cada uno? se mezclan en forma solida o hay que hacer una disolucion ? Saludos y myuchas gracias Marcelo

This is some high tech shit here boy let me tell ya, Hahahahahahaha

Puedo usar NaOH en lugar de KOH?

I'm gold palladium silver recovery full nowlige I'm big Rifaining

Pd Hcl precipitated with sodium hydroxide is dissolved immediately. Well, Why is Pd precipitate precipitated by ascorbic acid not dissolved with Hcl? üstelik birkaç dakika da kaynatılıyor.

how would you seperate silver and platinium?

سلام استاد برای رسوب از چی استفاده میکنند راهنمایی کنید ممنون میشم

Where are your gloves?!?! YIKES!

None of your videos are on rhodium recovery please sir a video

سلام عليكم ماهذا المرسب الذي رسبت بهي الذهب

Por favor .Podría ser tan amable de poner los químicos que Vd.utilza en este proceso.Mucjisimas gracias.Recibabun cordial saludo

Thanks

Муравьиная чистая или разбавленная

Como ago para pasar a español

هل ممكن ترجمة بارك الله فيكم

Nice video. Of course i give you Like and Subscribe

Olá poderia passar seu contato para trocarmos experiências, grato.

Hola !! Por favor si puedes dar otro curso como extraer rudio de polvo ! Descubrie un Montana de toneladas de polvo que contiene rudio!! Pero no sabemos como extraerle del polvo ! Gracias

Me olvidé de contar soy joyero

I know that you want to get a big income from KZfaq so you deliberately make the process run slow

No russian lang..

At tuzu cikar gumusu suz at sodium bi karbinat al paladiumu ne ugrasion bukadar be

Да ну нах, чё так можно?

Фигня .. намутил намутил .. зачем так сложно ?