Serger Timing Fixed

Рет қаралды 94,332

11 жыл бұрын

My serger wasn't looping so I opened it up and adjusted the upper and lower loopers until it worked correctly. It took me forever to figure out the correct alignment so I wanted to preserve what it should look like in case it needs to be adjusted again in the future. This might only help users with the same model. Siruba HSO-747D.

Пікірлер: 30

@joleach9483 Жыл бұрын

Omg. Amazing. Serger now fixed. Hurrah. Thank you. Just the video I’ve spent days searching for 😊

@princessalica 4 жыл бұрын

Thank you so much! I just was able to get my timing fixed on my machine. You're a lifesaver!

@capedoryus 6 жыл бұрын

Thank you for taking the time and effort to help others. Your video is well done and professional in that you zero in on the key elements.

@maloriemelson9423 9 жыл бұрын

Sarah, you have no idea how much your video helped me!!! I so appreciate you! Thanks a ton!

@Silverealge 9 жыл бұрын

Thank you SO much! Your Video was THE only one i needed to fix my Problem! I searcht for hours but not ONE was helpful. Just yours!!!! (sorry for my english, if it's not correct. I'm for Bavaria)

@SarahKes 6 жыл бұрын

This helped me fix my serger. The upper looper had been pulled behind the needle by a snagged thread and I didn't even realize it!

@rachaelpwells 4 жыл бұрын

thank you ...after 4 days of trying to repair timing! :)

@Sehara 6 жыл бұрын

Thank you so much! I just messed up my both loopers and tried to fix it. Your video is most helpful! ❤

@hetalianwaffles6684 6 жыл бұрын

awesome video,thank you so much, it helped me to fix my serger !!

@user-aseir-2024 Жыл бұрын

Thanks for the information.

@thuantran6573 5 жыл бұрын

It helped me too, Lumina overlocker. Thank you so much

@jeaneflaten 3 жыл бұрын

I needed this. Thank you!

@BreadNButterArt 5 жыл бұрын

Thank you for a clear view! 😌

@303jagter 7 жыл бұрын

This video is grate, thanks a lot :-)

@tracieboyce3638 6 жыл бұрын

thanks helped allot thank you for your time

@sallyorchard5796 7 жыл бұрын

thank you for your video!

@sabrinaphilibert4622 7 ай бұрын

I have a big problem, despite your video, I cannot adjust my overlocker. would you be able to show us a video of the needle bar at the highest and the upper looper at the lowest? This would help greatly. Thanks!

@xSally0 10 жыл бұрын

There should be a screw you can loosen underneath and then you can adjust the position of the looper. Glad to help. :)

@TiariContreras 9 жыл бұрын

Do you have a video of HOW you adjusted it? My serger's timing is off too but I don't know where to begin in fixing it.

@cakesthatrock 9 жыл бұрын

Team, there is set screws for the upper and lower looper you have to loosen. Be careful, only use sockets, and screwdrivers that fit perfectly. Paying more attention to the push than the twist when unscrewing. The bolt needing a socket is at the end to the left hand side for the lower looper. The upper looper set screw is at the frame needing a flathead screwdriver. You then may need to adjust the screw at the top of the upper looper. The distance between the upper and lower looper need to be .5mm when the meet. You can see this better looking down into the serger.

@patriciawinters 10 жыл бұрын

Girl ! thanks SOOOOOOOOO much !.

@ernestahworegba2332 4 жыл бұрын

how did you adjust the loopers? My timing is also off. please help

@petrarico7009 7 жыл бұрын

For Sarah. I have a question how do you change the lower looper on your serger. my lower looper point broke.

@myhouse108 6 жыл бұрын

Not hard at all - just need muscle to loosen the screw. Parts available at www.SewingPartsOnline.

@mikeycollins5029 6 жыл бұрын

let's hope it works for mine at work.....really miss it :)

@alexandrakivley8179 8 жыл бұрын

What brand/style of machine is this? Does this positioning work pretty much for any brand? also - aha i love that this video's category is "comedy". It made me go from extremely frustrated with my stupid machine to laughing at myself. :) thanks!