Set your clutch for FAST shifting

Рет қаралды 119,871

11 жыл бұрын

The clutch lever`s action is directly related to how the clutch works. Learn what you actually do when operating the clutch leaver. Shifting gears fast is a safety issue. Keep up with the traffic, merge without holding up others. Clutch cable adjustment in next video.

Пікірлер: 49

@thegamingtoxin7535 8 жыл бұрын

thanks ive always had a hard time understanding how the clutch works but for some reason your explanation is the only one that made sense

@jasonburke1329 22 күн бұрын

Can't take nothing away from this guy hes smart he knows his shit

@YMastersWRC 9 жыл бұрын

EXTREMELY clear explanation. Thanks for it.

@n305 9 жыл бұрын

Great explanation!

@BluWarta92 11 жыл бұрын

Very good explaining!

@mnclsatish 7 жыл бұрын

thank you for sharing nice information in this video

@ajs3994 7 жыл бұрын

excellent video. Many adjustments can be made to specific rider requirements making the ride safer and easier. I plan to install an air shifter with kill box, due to foot injury. Any advice is greatly appreciated.

@Tayusemaar99 10 жыл бұрын

great video

@RAPTOR0RIDER 11 жыл бұрын

oh.. thinx for correcting me

@HORNET6 8 жыл бұрын

Clutch engages/disengages the crank from the gearbox. Not the rear wheel.

@RAPTOR0RIDER 11 жыл бұрын

so we should shift at the play zone right ?

@hassanien1000 3 жыл бұрын

Thanks

@darewinder 8 жыл бұрын

i would just like to add a word of caution if i may. you are completely right you can take out your clutch play and it would be as same as having play on it just pulled to the engament zone.. BUT you are thinking of the clutch only a certain rpm only.. see clutch is pretty much like a torq converter it converts % of the engine torq according to its position.. Frictiom zone is the sweet spot where the % of the torq transferred is enough to move the bike... IT IS NOT where the clutch functions.. The clutch transfers torq even if you have it 1 mm moved.. the bike doesnt move because the torq is not enough but be assured that your clutch is slipping if you want to test this.. get out on the highway.. give it maximum gas and just touch the clutch (once taking the play out of it) you will see that it will slip... or when moving from dead stop.. give it constant rpm lets say 3k and try to do it from steep hill.. you will see that the friction zone changed.. what youre doing isnt wrong but the clutch play should be closely monitored.. too much play means it will slip even thou fully pulled in... too little or no play means even the sheer force of wind will cause it to slip

@theoverengineer 8 жыл бұрын

+Drr.Kivanc 100% agree. Some viewers tested the clutch-slip-by-overadjustment version and observed the same.

@darewinder 8 жыл бұрын

+theoverengineer :) glad the science has been worked out. my friends clutch went out at 10k kms he had no clutch play :)

@theoverengineer 8 жыл бұрын

ooooh, clutch replacement is no fun and costly ...

@theoverengineer 11 жыл бұрын

Exactly. There is a mathematical point where the plates are in full spring-force contact with no cable slack. Very hard to find it and unnecessary. Beyond that point there is still no cable slack and the plates begin to slip, and burn It is a bit like there is -20C ice, there is -10C ice, -5C -1C, 0C ice, then 0C water +2C water etc. Same on Fahrenheit scale. Point is: there is full contact with some cable slack, full contact with zero slack, slightly bad to very bad contact, all with zero slack

@MagisMoto 2 жыл бұрын

Nice

@joriedacuyasan1027 7 жыл бұрын

in freewheeling, is it good or bad for the bike to hold the clucth?

@theoverengineer 7 жыл бұрын

Neither, a mechanical necessity.

@sasazezelic 8 жыл бұрын

Great video! Is there a way to make the engagement zone shorter? My bike has huge engagement zone, around 5-6cm at the ball end.

@theoverengineer 8 жыл бұрын

+Salex Not reasonably possible. it will always stay 1-2 cm because of 2 things. 1 The clutch lever will not get longer. If it were, 5-6 cm is no problem. 2 The clutch plates / discs either touch or not. It is a binary system with no options in between. (no transition between the 2 positions, just like number of people in a room - only whole numbers are people, no decimal or fractional or partial people possible. Remains or limbs and heads are not people.)

@BerryTheBnnuy 6 жыл бұрын

OR you could have your clutch cable adjusted PROPERLY and just use rev matching.

@badjuju6563 8 жыл бұрын

I have a hydraulic clutch ..... how do I adjust that.

@theoverengineer 8 жыл бұрын

+Bad Juju Same way with its set screw at the lever, if fitted with one.

@badjuju6563 8 жыл бұрын

theoverengineer I don't seem to have a set screw.. Thanks for the reply.

@Spinnrolling 6 жыл бұрын

hydro clutch they self adjust, do to the liquid instead of the cable. so they don't need adjustments. (short answer)

@Botzz28 6 жыл бұрын

I’m new to my bike. So there is supposed to be play on that clutch ? The free play on my clutch is about an inch. Is that too much free play?

@theoverengineer 6 жыл бұрын

Not if your fingers are 1 inch long. Which can happen, just saying.

@theoverengineer 6 жыл бұрын

This visual might help: kzfaq.info/get/bejne/hqmKoqim2qrSnY0.html

@craigmac1516 5 жыл бұрын

free play should be about the thickness of a nickle . you should be able to squeeze a nickle in between the lever and the perch where they touch.so really just enough play that you can tell its not on clutch tension . and inch is far too much.

@noumine 9 жыл бұрын

Is that you, Antonio Banderas? Hehe

@theoverengineer 9 жыл бұрын

noumine Yup. I quit acting and have taken on engineering. It`s more fun ;)

@torqingheads 7 жыл бұрын

I am the way the truth and the life.

@theoverengineer 7 жыл бұрын

Yes, and if he was a mechanic, he would probably set the clutch the same way. (Carpenters wouldn`t know.)

@torqingheads 7 жыл бұрын

I was a carpenter once but no longer.

@theoverengineer 7 жыл бұрын

Hmmm. That`s the same as stating God changes, or God changes mind, or God guesses or gives up on previously made choices which runs contrary to what the church upholds about the immutability of God. Problem for 3 religions right there. Once a carpenter, always a carpenter has a more familiar ring. It`s like once a bike has traction control, it has traction control, regardless if it`s on or not, bike running or not, it has it.

@williethompson8047 7 жыл бұрын

Jesus Christ