Setting the Best Home Theater Crossover Frequency for your Speakers a Tutorial

Setting the Best Home Theater Crossover Frequency for your Speakers a Tutorial | SACT

Рет қаралды 26,796

Жыл бұрын

Get your SACT today - technodad.biz/SPATIAL - Setting the right crossover is important when calibrating your home theater. Check out how easy it is with the Spatial Audio Calibration Toolkit! Manual Level Match - • How to Level Match Spe... - New Denon Menu - • Denon & Marantz Menu U...
Become a Patron - bit.ly/TDPatreon
Sign up for our Newsletter - technodad.biz/AtmosDL
Rent 4K Blu Rays at 4K Blu Ray 4U: bit.ly/TD4KBR4U
Recommended HDMI 2.1 (8K) Cables - technodad.biz/HDMI21
Pioneer AVRs:
VSX-LX305 (Dirac Live) - shop-links.co/cg2P5ZMlJyY
VSX-LX505 (Dirac Live) - shop-links.co/cg2QaVwyuIa
Denon AVRs:
X2700H - shop-links.co/cg2PVUn8bub
X3700H - shop-links.co/cg2PPiOHaQY
X4700H (Auro-3D) - shop-links.co/cg2POiXED0b
X6700H (Auro-3D) - shop-links.co/cg2PNjn17vV
X8500HA (Auro-3D) - shop-links.co/cg2PQB44hkh
Marantz AVRs:
SR5015 - shop-links.co/cg2PWKL8Or0
SR6015 - shop-links.co/cg2PUSOjrQm
SR7015 (Auro-3D) - shop-links.co/cg2PSuyuxxf
SR8015 (Auro-3D) - shop-links.co/cg2PT7CitAh
Marantz Preamp/Processors:
AV7706 (Auro-3D) - shop-links.co/cg2PGoacZKH
AV8805A (Auro-3D) - shop-links.co/cg2PLJHhnPV
*My DJ Gear*
Denon DJ SC6000 Media Player - adorama.rfvk.net/6bAe9V
Rane MP2015 Rotary DJ Mixer - adorama.rfvk.net/vnyN3O
Denon DJ Prime 4 - adorama.rfvk.net/Gjnm5r
QSC K12.2 PA Speakers - adorama.rfvk.net/yRy23v
QSC KS118 Subwoofer - adorama.rfvk.net/MX5mx3
Pioneer HDJ-X10 Headphones - adorama.rfvk.net/5bA5yL
My favorite subwoofers:
technodad.biz/REL
2020 Denon AVRs - technodad.biz/Denon2020
2020 Marantz AVRs - technodad.biz/Marantz2020
Monoprice subwoofers: amzn.to/33G8iD0
7-Channel AVRs: amzn.to/2DmnMBt
9-Channel AVRs: amzn.to/2PVf2Jl
4K HDMI Cables: amzn.to/2QCi3LW
Budget Range 4K TVs: amzn.to/2JLaf7X
Mid-Range 4K TVs: amzn.to/2zEqdfA
Premium 4K TVs: amzn.to/2qxoRPx
OLED 4K TVs: amzn.to/2R9DRC5
Sony 4K TVs: amzn.to/2QM5YqR
B&O Headphones: amzn.to/2RulKDG
Recommended Soundbars: amzn.to/2SVutDV
DISCLAIMER: This video and description contain affiliate links. As an Amazon Associate, I earn from qualifying purchases.
Check out my recommended products on Amazon: www.amazon.com/shop/technodad
Equipment used to film & edit:
Sony FX3 - amzn.to/3dOyUZR
Sony 25mm F1.4 GM - amzn.to/3xjrplo
Lens I want to try - Sony 35mm F1.4 GM - amzn.to/3gDFft4
Lens I want to try - Sony 50mm F1.2 GM - amzn.to/3dOvd6D
Atamox Ninja V 5" HDR Monitor - amzn.to/3dNRMYY
Rode NTG-2 Shotgun Microphone - amzn.to/3dQowRa
XLR Male to female 1 foot - Blue - amzn.to/3xjrRA6
Sachtler Flowtech 75 Tripod Legs: amzn.to/2KSyqDI
Manfrotto 504HD Video Head: amzn.to/320tzFU
Edelkrone SliderOne V2: bit.ly/2Pbvk1L
Edelkrone SliderPlus: bit.ly/2Pky0KC
Edelkrone HeadOne: bit.ly/2ZnsxWR
Edelkrone DollyOne: bit.ly/33TKHPK
Edelkrone FlexTILT Head 2: bit.ly/2Pkyr7I
Atamos Ninja Inferno 7" HDR Monitor: amzn.to/2N3pM6k
Tilta Nucleus Nano: amzn.to/2TUKsiK
Amaran 60x: amzn.to/3TagJzO
Rode Procaster: amzn.to/338cfjA
Rodecaster Pro:amzn.to/2NtK7Rg
Zoom H6 Handy Recorder: amzn.to/2NzSUku
MacBook Pro - www.jdoqocy.com/click-8786448...
iPad - www.jdoqocy.com/click-8786448...
Mac Mini - www.dpbolvw.net/click-8786448...
iMac - www.dpbolvw.net/click-8786448...
Thank you for watching!
Don't forget to like and subscribe!
Facebook: bit.ly/TD5FBP
Twitter: bit.ly/TD5TWTR
Instagram: bit.ly/TD5INSTA
Spotify: bit.ly/CDS29YrsS
Soundcloud: bit.ly/DJCDSSC55
Techno Dad Audio Demo Tracks - Tidal: bit.ly/2IxZzKO
Techno Dad Audio Demo Tracks - Spotify: spoti.fi/2Rnv4dv

Пікірлер: 139

@TechnoDad Жыл бұрын

Get Your Spatial Audio Calibration Toolkit Today and Stay Tuned! SpatialCD.com Join the SACT Owner's Discord Group for Tips, Tricks, & Advice: discord.gg/exSvPERuQK SACT Tutorials Playlist: kzfaq.info/sun/PLLo6DbkjBoKbmccA7sKPGLci1SCM_unYW Disclosure: The Affiliate links above earn me a commission if you purchase using those links. This is at no additional cost to you. I am a co-owner of the Spatial Audio Calibration Toolkit.

@christopherwashington2334 4 ай бұрын

Does this provide calibration for your subs as well?

@t-rex1480 Жыл бұрын

I think it's important to note that just because a speaker can play lower frequencies at a similar spl to the higher frequencies, doesn't mean it should. If you went through and calibrated your subs, allowing any other speakers to play lower frequencies will throw the sub calibration out of wack. Also, a speaker may be able to play 50hz but it doesn't mean it will handle these lower frequencies well, especially as spl increases. Unless a person is using large L/R, a speaker should not be crossed over below 80hz is a good rule of thumb. In many cases they could benefit from being crossed over even higher. Lastly, even if a person has large front L/R speakers, it is still generally excepted they should be crossed at 80hz as to not interfere with the sub calibration as noted above. I understand this calibration disk (which I purchased) is intended for people to be able to calibrate their system without measuring equipment, but that's even more of a reason to stick with 80hz or higher for the crossovers. It takes a person with alot of knowhow to correctly integrate large fronts with their subs, so it's better to stick with the general rule in this case, imo of course. Not hating, just making an important observation

@joentell Жыл бұрын

I agree with most of what you said. I recommend for people to listen for distortion when it plays those lower octaves. Play it loud-"ish". This is something auto-calibration does not do. People may want to use this to ensure that auto-calibration didn't set crossover points too low. This has happened to me numerous times. It takes the room gain into account and sets a really low x-over. Most room correction attempts to flatten the bass response prior to choosing the crossover point which means you should theoretically get good summation at numerous x-over points from 40hz-120hz. Whether it will or not is a different story. Auto-cal doesn't do post calibration checks, but it should. There are times when the sub can have a null at a certain frequency, so lowering the crossover can sometimes allow the main speakers to handle that duty if they don't also have that null.

@ramonrios6 11 ай бұрын

Thank you for the information I checked out a couple of your videos and now my home theater sounds great Keep up the good work

@ramonrios6 11 ай бұрын

Thank you for your information my home now sounds great

@keepingupwiththejones2933 Жыл бұрын

Excellent explanation and tutorial for testing crossover frequencies

@TechnoDad Жыл бұрын

Thank you, Jonesy!

@cgm246 Жыл бұрын

Awaiting my disc now....eager to test it out!

@TechnoDad Жыл бұрын

Nice!

@craigosterberg5045 Жыл бұрын

Thanks for sharing

@TechnoDad Жыл бұрын

You’re welcome!

@garryhammond3117 Жыл бұрын

Thanks for sharing Dude! - My package just arrived today, - I'm very anxious to plug 'er in and do some testing. Love the personalized message on the package! - Cheers.

@TechnoDad Жыл бұрын

Right on, Garry!

@TheReverendSlim Жыл бұрын

The only thing I would add here is that you should re-run these tones after setting your crossover points to make sure you are getting good integration with the sub(s). Phase and timing can make it so you get better results at a different point, so you want to re-check with bass management in play to make sure you're getting a smooth transition of the tones after adjusting the crossovers.

@randelldavis578 Жыл бұрын

Hey Reverend slim, I'm thinking about pulling the trigger on the disc version and it seems that you have used this. My question is, is it worth it. I have Klipsch RP 8000f, RP 404c center channel, RP 600m and RP 502 for surrounds and 4 RP 500sa for Atmos. SVS pb 3000 subwoofer, marantz sr 6015 AVR with the emotiva basX 3 for the front stage and a Sony 4k 700m blu ray player. But I read in the description that you'd need the 800m disc player. Just wanted to find out if I had the right equipment since it looks like you've used it. Thanks.

@TechnoDad Жыл бұрын

Yes! 100%! Turn the subwoofer back on and listen to how well the subwoofer integrates with each speaker.

@TechnoDad Жыл бұрын

Randell, with the disc, you also get access to our Discord group where myself and Joe try to answer questions as best we can. Slim is pretty active in the discord and also helps out when we cannot.

@John-ok8ts Жыл бұрын

@@randelldavis578 you would think this is all easily downloaded of the internet or easy to do with a computer. It's not and to do it yourself you need to buy the atmos renderer. As good as.something like dirac is there's nothing that is as simple as just playing a sweep or tone to a channel.

@TheReverendSlim Жыл бұрын

@@randelldavis578 The Blu-ray will work in any blu-ray player. As for whether it's worth it, I can't answer that for you because it depends. If you're happy with the way your system sounds and are not much of a tweaker, then maybe it isn't for you. BUT if you think you may have a weakness in your system that needs to be addressed or want to eke out that last little bit of performance (or just make sure things are working as they're supposed to), I highly recommend it. I like to get very hands-on with my system and tweak things to wring out the most performance possible, and SACT has all of the tests I need to check level-matching, crossovers, cross-channel imaging, etc. And most of the tests can be done with your ears and a SPL meter (or even a SPL meter app on your phone, if you don't need precision), but it also has tests for those who use REW and a calibrated mic. For you, given the equipment you listed, I think it would be a pretty small investment to make sure you're getting the most out of your gear, which is where I think its primary value is. Even with a modest system, a tweaker can get fantastic sound if they have the tests to work with. SACT isn't going to hold your hand and guide you through it all... but there is online documentation outlining how to use each of the tests, and a robust community on the SACT Discord channel that can answer any questions you have.

@tomconnell7154 Жыл бұрын

Ayyooo.....technolicious out here givin the world them Ricardo "Rico" Tubbs vibes !!

@TechnoDad Жыл бұрын

Woot woot!!!

@abrarahmed8360 Жыл бұрын

Hey @technodad, I've purchased the digital version of spatial calibration, just wanted to check if it would be possible for you to share the iso file of the disc, I can write it on a Blu-ray disc?

@irish7460 6 ай бұрын

1:21 lol gotta love how this whole line is more of a challenge than a disclimer lol. Masterfuly done Channa.

@TechnoDad 6 ай бұрын

Thank you!

@graemacinnis1202 10 ай бұрын

Hey Channa, I just ordered the bundle, and really looking forward to giving this a run. You guys have really hit a home run with this. Since I'm my friends and co workers resident Home theater guy and "consultant", I expect to get a lot of use from both formats. My question, I have an 7.1.4 setup using an Anthem MRX 1120. You know how good their room correction is. What's more beneficial, running the RC first, then the calibration, or the other way around? Thanks again for all the work you do for the community.

@TechnoDad 10 ай бұрын

Hi! Thank you for buying our disc! You could do a few things. One would be to use the disc to verify that the ARC has set up everything properly. Level matching, crossover points, timing, and of course, the torture test section. I’m pretty sure ARC Genesis allows multiple presets. You could start fresh and try a fully manual calibration and set it to a different preset. Then A/B the presets with your favorite content.

@johnsagraves14 Жыл бұрын

Would love if you had instruction videos like this on all sections of the disc. Sometimes I need spoon fed with step-by-step instructions... well, probably more than sometimes, like always.

@joentell Жыл бұрын

More instructional videos on their way! Stay Tuned!

@kevinsheehan8202 Жыл бұрын

Channa I bought the spacial Audio Calibration Toolkit. I have a question. Can I receive Dolby ATMOS with just 2 Middle height soeakers or do I need front and Rear Height speaker setup. Thanks Kevin Sheehan

@TechnoDad Жыл бұрын

Hi! You will have all the height information coming out of those overheard speakers you have.

@azwan1927 2 ай бұрын

How much is the best Crossover Cinema for me to set on the Pioneer 12-inch Active Subwoofer in my house? Is it 80Hz, 90Hz, 100Hz and 120Hz?

@R3LAPS3productions 2 ай бұрын

Every time I watch calibration tutorial I'm always under the impression that the speaker distance is crucial for a great sound but rarely any of the tutorials ever mention the distance. Not all of our rooms are the same distances as the tutorials. Is speaker distance not important?

@sjsphotog Жыл бұрын

@TechnoDad - so if you use this method then you have to not have Audysey enabled? Do your keep Audysey on saved preset 1 and this SACT on preset 2? I have a Denon 4700h. Are the new Blurays containing the latest updates or do you still have old stock with old files and getting the downloads is better for up to date? Thnx

@TechnoDad Жыл бұрын

Hi! You can use this part of the disc with Audyssey to fine tune your crossover points per speaker.

@Mr.HotRod 11 ай бұрын

Hi Channa: I have the new Naka Dragon coming in a couple weeks. Do you think any of the features / settings would help me if I order your Disc. I know your a little familiar with the Dragon so what would be your basic opinion. Thanks Hot Rod

@TechnoDad 11 ай бұрын

Caleb from Digital Trends just did a review of the Naka Dragon and used our disc to dial it in - kzfaq.info/get/bejne/f5dhrLhk25fXoWQ.html

@scottybjorlin3821 11 ай бұрын

Hey Mr. Techno Dad, I watched this video and redid my crossovers. What is the advantage of setting them lower if my LCR's can go lower? My LCRs go to 40-50 so I set the crossover at 60. My question is, what does this buy me? Thanks in advance and I'm enjoying using the SACT!!

@audiodynamicsmaxsolutions 3 ай бұрын

You are basically trying to produce bass from your LCR. 60hz and above. But doing this taxes up power. (If using avr this crossover isn't right needed higher). Every room has different crossover points.as It needs to be for better integrating of LCR to sub. REW. Will help us determine the right crossover for your room for you speakers at your seated position. Which also offload the avr strain and let the subwoofer (highly capable to produce bass louder than speakers ) Is right way.

@PR1NCEM1 10 ай бұрын

Hello my friend.. been watching you for some years now, Am a little confused.. what setting should I be playing my subwoofer? I have the 15inch from klispch 400RMS 800 peak, i tried the LFE switch on the subwoofer an it also has from 40hz up to 120hz, for some strange reason it’s Sounds better on 40HZ instead of it being on LFE.. also in my setting am rocking the Denon 11 channel amplifier but I have the bad set to 120HZ for the mains plus LFE.. is that correct?? The Denon I have is the X6400H

@TechnoDad 10 ай бұрын

Yes, you have everything setup on the Denon correctly. It’s a funny thing about the LFE channel. It’s not really bass per se, more like low rumbles and things of that nature. Usually, in music, good bass will be around the 40Hz - 60Hz range.

@PR1NCEM1 10 ай бұрын

@@TechnoDad so shall I keep the sun on the LFE or on 40HZ?? When I set to LFE I have to set the gain really High or play at high level to get decent bass…

@Thug2u 7 ай бұрын

I have 110hz speakers and my avr only has 100hz or 120hz selections is it ok to set avr to 100hz for my 110hz speakers or is it best to keep them at 120hz? Any help would be appreciated thank you....

@audiodynamicsmaxsolutions 3 ай бұрын

120hz is the right option

@moveezy5591 Жыл бұрын

I'm thinking about purchasing the is this something I do with diraclive or instead

@TechnoDad Жыл бұрын

Instead of Dirac. It's for manual calibration.

@mattiasgostasson6010 Жыл бұрын

I did an auto calibration my fronts audio pro avantek six when down too 40HZ. My center too 100HZ. My surround 120hz. LFE 120hz . Is this a good setup ? or should i bump up my mains too 80 hz ?

@TechnoDad Жыл бұрын

Depends on the speakers performance

@praveenkumaralex3026 Жыл бұрын

Hi can I use Parasound 2350 amp use for Denon AV receiver as a 2 channel front L/R speakers. Please suggest.

@TechnoDad Жыл бұрын

Yes, you should be able to!

@mattgiunt Жыл бұрын

Did fine with this section using disc however with this video the only tone I heard was when you played LFE. Was hoping to hear tones down to where you considered to place crossover but it was all silence.( could just be my ears but I heard tones when I used the disc)

@TechnoDad Жыл бұрын

The mic can’t pic those tones up, that’s why I sped it up.

@mattgiunt Жыл бұрын

@@TechnoDad thought I was heading for major hearing issues--Thanks

@sjsphotog Жыл бұрын

Channa - why would getting the disk be better if you can't update it after purchase it becomes obsolete and missing the new stuff (i assume u add bug fixes or new things) and only the actual files will be kept up to date?

@TechnoDad Жыл бұрын

So the disc is actually version 3. We launched the digital in December and made two more updates with additions and fixes. Then, I sent the disc off to be authored end of January, after the update on the 19th. So the disc is SACT 3.0 if that makes sense. No more updates needed.

@Rebel6274 Жыл бұрын

Went to the website to see about purchasing the disk .. And I see y'all are extremely proud of it .. .$$$

@joentell Жыл бұрын

Were you looking at the bundle or just the physical disc?

@Rebel6274 Жыл бұрын

I thought it was the disk . $150.00

@TechnoDad Жыл бұрын

@@Rebel6274 The disc only version is $99 - technodad.biz/SpatialDiscOnly

@Rebel6274 Жыл бұрын

No sir .. not for me .. too expensive. Us people on budgets never catch a break ..

@paranormalhappenings3988 6 ай бұрын

Do I need to run Audyssey before calibrating with this software?

@audiodynamicsmaxsolutions 3 ай бұрын

That would be better. But REW verification is good way

@RaleighUFO 2 ай бұрын

Maybe a stupid question but how does this CD work with the Denon software for X2700?

@mikedinno8413 Жыл бұрын

By setting the cross at 60hz aren't you tossing the entire LFE, from 60 to 120, out the window? Thats leaving bass on the table. Thoughts?

@TechnoDad Жыл бұрын

120Hz and below go to the subwoofer and the speaker stops around 60Hz

@stevelepley3149 Жыл бұрын

How does this relate to AVR ? Does this merge with AVR. How does this change settings in AVR? I have a Pioneer Lx 703.

@audiodynamicsmaxsolutions 3 ай бұрын

Just need to use crossover menu to adjust and perform the steps. But REW is superior to setup the system much better as there's a point of validation to be made.

@midbass.maestro Жыл бұрын

I just payed for toolkit. Can I download fine or do I have to wait

@TechnoDad Жыл бұрын

Shoot me an email so I can check on this - technodad55 at gmail dot com

@uceddiemo Жыл бұрын

Thanks for another Video, Keep them coming

@ronalddecelis1944 Ай бұрын

Hi on what blu ray player can I play the disk?I have Phillips blu ray player which is a couple of years old.

@TechnoDad Ай бұрын

Hello! Yes, you can play the disc with any standard 1080p Blu Ray Player - spatialcd.com/products/spatial-audio-calibration-toolkit-disc

@mkhaudio Жыл бұрын

How accurate is this? Every time you said 50hz and then you choose either 60hz or 80hz? If it's try and error, i can just listen and change by listening to different crossover point !

@TechnoDad Жыл бұрын

The test is very accurate, however, the Denon doesn't offer a 50Hz option, it has 120, 100, 90, 80, 60, or 40Hz. So you have to play within the confines of your AVR. Some do have more options for crossover points, but the Denon X3800H does not have a 50Hz option, or a 70Hz option, which I could have used with these specific speakers.

@FredrikiLund Жыл бұрын

Thanks Techno Dad - I got my Spatial disk today in Sweden 😀 Waiting for the new Onkyo RZ50 - coming to Sweden any day soon!!!

@TechnoDad Жыл бұрын

Sweden!! Woot woot!!

@Kev-O33 Жыл бұрын

lol it sounded like glass rattling at 35hz! wow

@hikerrepalda9526 Жыл бұрын

Hi! How to order the CD? I live in Philippines.

@TechnoDad Жыл бұрын

SpatialCD.com - we also have a digital version to save on shipping if you can play the digital files.

@midbass.maestro Жыл бұрын

Can I download sact right after I pay for it?

@TechnoDad Жыл бұрын

Hi! If you get the bundle, you will get access to the download right away and the disc will be shipped to you.

@hoihoi9866 8 ай бұрын

I got exactly the same almost, I got big center but also big front speakers and subwoofer so I put the center on 80 not 60.

@TechnoDad 8 ай бұрын

Nice! How does it sound?

@hoihoi9866 8 ай бұрын

@@TechnoDad great everything is in balance. Active subwoofer on 50%and also level subwoofer 50% So it goes on at some level in movie or TV and works great. Too much bass can be enjoying so this is good. Thx for message

@rodgerkempisty4721 Жыл бұрын

Just ordered mine can't wait

@TechnoDad Жыл бұрын

Awesome! Thank you so much!

@Rob_James Жыл бұрын

Love these videos. Def helps me use the disk correctly. Lfe made the shelf in my oven rattle 😂

@TechnoDad Жыл бұрын

Lol! Nice, Rob! Don’t forget to join the Discord, share pics of your setup and ask questions.

@Rob_James Жыл бұрын

@@TechnoDad would I need social media like Facebook for the discord? I currently don’t have any social media

@TechnoDad Жыл бұрын

@@Rob_James No, Discord is it's own thing.

@Rob_James Жыл бұрын

@@TechnoDad oh nice. Will def look into it. Thanks for letting me know about it 👍👍👍

@RahzAlGhul Жыл бұрын

If you had to pick between the x4700 and x3800 which one would you get? Only going to do 4 height channels. Also what you think about Dirac

@TechnoDad Жыл бұрын

I would go with the newer X3800H - amzn.to/3GW1pTM

@ants9574 Жыл бұрын

I'm a little confused. Are we just listening for when the tone becomes barely audible and thats what our crossover should be set at ?

@audiodynamicsmaxsolutions 3 ай бұрын

Yes but this method isn't reliable REW is always the right way to get better idea of how to integrate. I can help.

@xanderx9988 Жыл бұрын

I’ve never manually done a crossover test before, so if I understand this correctly, I’m supposed to select the lowest number that I can hear?

@TechnoDad Жыл бұрын

Yes

@midbass.maestro Жыл бұрын

Do you think my gf will enjoy listening to the sact for 6 hours when it shows up❤

@TechnoDad Жыл бұрын

LOL! Maybe after you do the calibration she will!

@sjsphotog Жыл бұрын

Send her on a shopping date trip out of the house with her g/fs while you do it. ;)

@BEEFTEEF4 12 күн бұрын

My dude looks faded af. But I have mad respect RIP. I just covered this song on 5 string bass guitar tonight in memoriam.

@TechnoDad 11 күн бұрын

I’m not sure what to make of this…

@BEEFTEEF4 11 күн бұрын

@@TechnoDad wrong video! Hahaha. WOW I wondered what happened to this comment.

@TechnoDad 11 күн бұрын

Hah! Okay, makes a lot of sense now…

@demigodmac Жыл бұрын

Just from earballing regular content, what are some telltale signs of speaker crossover settings being too high or too low and needing a calibration done?

@TechnoDad Жыл бұрын

That's hard to say as most standard or regular content has too much fast action for you to notice. Let alone, how are you to tell by ear what frequencies are being played. You could try some sort of spectrum analyzer but it's still hard to hear when using standard content.

@michaelwyckoff7593 Жыл бұрын

Yo Channa D.

@TechnoDad Жыл бұрын

Yo Yo Yo!!

@michaelcarver540 Ай бұрын

I noticed when I did it the sound had more detail

@TechnoDad Ай бұрын

Nice!

@byronquinley1400 Жыл бұрын

Interesting. Didn't think crossover should be set to less than 80hz even if the speaker could handle it.

@TechnoDad Жыл бұрын

It definitely depends on the speaker, but if you have large towers, you could get away with 60 Hz or something like that.

@ReesesCupsAreGood Жыл бұрын

Sorry off topic. Do you have any videos on how to soundproof a movie room so your neighbors aren't disturbed by your sound system?

@TechnoDad Жыл бұрын

Hi Derek! Unfortunately, no, I do not have a video about that.

@Coffeedad 6 ай бұрын

Safari says the discord address is invalid

@seantong6105 Жыл бұрын

Audyssey already does a good job of setting the crossovers ...

@joentell Жыл бұрын

Most of the time, yes. I've had it set them too low before. Dirac has also. Too low and the speakers distort when played near reference volume.

@TechnoDad Жыл бұрын

I’ve reviewed about 10 AVRs from Denon and Marantz. The crossovers are all over the place. Set too high and set too low. It’s a crap shoot. I always go in and adjust. Now you don’t have to rely on a system that gets it wrong 80% of the time.

@seantong6105 Жыл бұрын

@@TechnoDad it usually sets my mains too low at 40hz but I just adjust to 80hz which is always a good starting point to work from, it can also be subjective to where you set it, some people can localise 80hz and above more than others

@seantong6105 Жыл бұрын

@@joentell That's why you also use REW ...

@seantong6105 Жыл бұрын

@@TechnoDad Or you could use Audyssey and REW ...

@richardmyers7181 Жыл бұрын

Channa how mytch is the disks in euros

@sjsphotog Жыл бұрын

Google USD to Euro converter :)

@danemoreno88 Жыл бұрын

I don’t think this will work that great as everyone has different levels of hearing and people have hearing loss as well that’s why the microphone and audessey or Dirac is what is the standard

@TechnoDad Жыл бұрын

You can definitely use a dB meter to see what the level of each frequency for each speaker is, and then judge for yourself which is the best crossover if you feel your hearing is not the greatest. I have had mixed results with Audyssey choosing crossovers and Dirac is not the best either. You will gain performance moving to manual calibration, but you will need to take the time to learn how to do it and have the right tools to do it, like our disc.

@TheReverendSlim Жыл бұрын

To be fair, hearing loss like you're referring to tends to be more in the high frequencies and midrange, well above the frequencies we're talking about when setting system crossovers. You're correct that a SPL meter or calibrated mic is the more accurate method, but that doesn't mean that you can't get good results just using your ears if you don't have those other tools available. That's why there are tones on the disc that can be used with any of these methods.

@joentell Жыл бұрын

It's very easy for us to hear a 10dB drop in sound. That's what we perceive as something being half as loud. This is a simplified method for checking crossover points. It's also a good way to check if Audyssey or Dirac did a good job picking the crossover point. I've had issues with them setting the point too low since they don't check for distortion at higher levels. This is something I recommend everyone do. Just turn off your sub and play low frequency content at near reference volume and make sure your speakers aren't hitting any physical limits.

@mcarr416ix Жыл бұрын

@@TechnoDad there's zero chance this disc is giving you a more accurate result that Audyssey and Dirac, come on. The disc is just playing a tone and allowing you to choose what you feel sounds best. Nothing wrong with that, I don't use conventional settings myself a lot of the time....but in terms of accuracy...nah.

@santiagoezquerrocordon1470 Жыл бұрын

Well, doing that test by ear, doesn't. Make any sense. Maybe you can hear 60hz in your speakers, but it's 10db lower level than the rest. So it wouldn't make sense to set the crossover al 60Hz and you should go to 80Hz. This test MUST be done with microphone 🎤.

@TechnoDad Жыл бұрын

There's nothing stopping anyone from using a mic.

@santiagoezquerrocordon1470 Жыл бұрын

@@TechnoDad yeah, I know. Thanks for answering.