Setting up my 7M on the Dyno: Customization, Fabrication, and Wiring my AEM Infinity.

Рет қаралды 15,421

4 ай бұрын

In this video, I show you what it takes to get my 7M mounted on the dyno and ready for a tune!
Here are some of the parts that I show in this video:
Driftmotion Oil Filter Remote adapter: www.driftmotion.com/AN-10-Rem...
Driftmotion Oil Filter Relocation Block adapter: www.driftmotion.com/Driftmoti...
Driftmotion/Mocal Oil Filter to Oil Cooler Sandwich Plate: www.driftmotion.com/Mocal-SP1...
Driftmotion PnP AEM harness for the 7M: www.driftmotion.com/AEM-Infin...
To check out my complete list of Tools, Shop Supplies, and Parts recommendations: www.amazon.com/shop/fayehadley
Equipment I use for filming:
Phone: amzn.to/3xUkvFd
Camera: amzn.to/3EAuhyp
Tripod: amzn.to/3EBYtJr
Drone: amzn.to/38DgR8P
www.pistonsandpixiedust.com
IG: @pistonsandpixiedust
FB: @pistonsandpixiedust
TikTok: @FayeHadleyOfficial
Twitter: @SupraFaye

Пікірлер: 144

@Axial_Andrew 4 ай бұрын

Miss Faye is Queen Toyota for a reason... And that is why we love her!

@intentsmodz 4 ай бұрын

Hey that's a pretty sweet Bug ya got there!!

@Axial_Andrew 4 ай бұрын

@@intentsmodz thanks, it's an rc car tho...

@intentsmodz 4 ай бұрын

@@Axial_Andrew 🫣 I saw that after I commented then clicked on it to see it up close. 😂 It's still pretty cool.

@MyLilMule 4 ай бұрын

I have no doubt, Faye, that if you decided to start TIG welding, that you would excel at it. You've proved that so many times. I'd also like to commend you on continuing to break those glass ceilings! Love what you are doing!

@FayeHadley 4 ай бұрын

Wow, thank you!!!! 🥰

@johndandrea8034 4 ай бұрын

I had no idea how complicated Dyno setup was!!! Now I know why you went to Harvard!!! It takes a lot of smarts to get that setup right. Nicely Done!!

@FayeHadley 4 ай бұрын

Aww haha thank you!!!😅🙏🏻❤️

@terraboundmisfit 4 ай бұрын

It is not normally this complicated.

@TheBobbytables 4 ай бұрын

I havent been watching these videos for very long, but everyone needs a hype man like Danny in their life!

@FayeHadley 4 ай бұрын

So so true!!!!

@hornet7288 4 ай бұрын

You're getting close Faye! Props for sticking with it! The mk3 community anxiously awaits to hear it fire up!

@brakedd 4 ай бұрын

That motor looks fine as hell

@johnbullard2129 4 ай бұрын

Danny brings knowledge & a good vibe to your builds.

@independenttwospiritmedia9555 Ай бұрын

I have a black Camry and my dream is a 86 with a 7m. Thats what turned me onto your channel! The more i learn about you the more i love you girl. 🥰😍Please keep the builds content coming.

@errolwong6445 4 ай бұрын

Wheew! Chickens! I can understand holding off first start to another video, but almost freaked when I thought no Chickens? HA HA HA! Love the video Faye! Danny!

@FayeHadley 4 ай бұрын

We are having a freeze this weekend, so can't take the dyno out of winter mode just yet! So next weekend for first start!! Plus I really wanted the start to have it's own video 😅

@happygarage6310 4 ай бұрын

It's been a long process. Nice to see things coming together.

@malikdigger4544 4 ай бұрын

Just another amazing mechanic shop video with Faye & Danny this know how hands on team is fantastic

@kennyconomos5222 3 күн бұрын

We need to see the video of this running on the dyno!!!!!

@A_Bone1972 4 ай бұрын

takes a lot of know-how to figure things out as you go! let there be life! so happy for you to start seeing the product of your process. having an eye for quality in making sure each step of the rebuild is being done 100% correctly while learning everything as you go is quite the accomplishment. worth every second of your time that you've chosen to invest which makes that time much the opposite of free time! much 💗 ✌️🐝➕

@FayeHadley 4 ай бұрын

You're so right, thank you 🙏🏻

@A_Bone1972 4 ай бұрын

@@FayeHadley i have a concept for a belief that i like to think of as true. the universe is a system designed to spread love. synchronicity is the universe reminding us that we are loved, and that it's okay to love ourselves no matter how difficult we make that for ourselves. the more we spread love the less difficult it becomes to love ourself. during the moments that we are not thinking about negativity, stress, and hate nor focused on trying not to think about those things, are when we have our chances for experiencing synchronicity. as much as i like this concept, i forget & still have my struggles. nonetheless, the times that i've found myself opening KZfaq to see the 1st video suggestion being one of your posts, and feeling the always positive energy you put into everything, so that by the end of the video i feel that energy linger with a smile on my face, those for me are moments of synchronicity. i am more than happy that you appreciated my effort to express a perspective in an attempt to return some of that positive energy to give you a chance to experience a moment of synchronicity. (i'm also extremely adept at beating myself up. although subtle & brief, for my 1st time ever, i felt a bit of that vibe come from you in this one) much 💗 ✌️🐝➕

@thewatcher611 3 ай бұрын

I like the part about the PCV and catch can stuff. I believe the old GM Quad 4 engines did use a catch can that condensed the oil, and drained it back into the crankcase via a large diameter oil fill/dipstick tube.

@engineer4hire 4 ай бұрын

Good luck Faye! I hope your engine makes lots of power 😊

@james1965 4 ай бұрын

I can't wait to hear this beauty run! It's going to sound fabulous!

@FayeHadley 4 ай бұрын

You and me both! I'm so excited!!!

@grundyb 4 ай бұрын

I had a similar engine in my old 1985 Toyota Cressida. What a great family cruiser for my wife and two kids. All stock and a great reliable four door machine.

@FayeHadley 4 ай бұрын

Yes, exactly!! Same engine! Awesome 😃

@jozsefizsak 4 ай бұрын

Thank you so much for this insight into dynos. It never occurred to me that it could be so involved. The engine is astonishing and a universe away from anything I rebuilt in the days before electronic controls of any sort were incorporated. This is so exciting! 😊

@FayeHadley 4 ай бұрын

So glad you enjoyed it, and thank you!!!!😃

@davidearl8942 4 ай бұрын

You and Danny rock!!! Tons of work cant wait to see it run!!

@TD_YT066 4 ай бұрын

Wow, that wiring diagram and harness, that's some hard work there.

@FayeHadley 4 ай бұрын

Thank you 🙏🏻

@TD_YT066 4 ай бұрын

@@FayeHadley Back when I still had my 86MkII , I looked into replacing the 5M-GE with a 7M-GTE , but the computer change looked a bit beyond me, also didn't have a shop. Best of luck on your project

@802Garage 4 ай бұрын

I can't watch right now but yesssss so excited for this!

@dannyboystudios6604 4 ай бұрын

Looking forward to the dyno pull!! I like the real world builds you show here Faye. Not the “pretty for KZfaq” shop stuff. Looks more like if I had a Dyno at my shop. Not all mechanics work in “pretty places”. I try to keep it clean, but real world cars and shops are kinda messy. I like to call it an “organized mess”. We all know where the equipment is, it just doesn’t look that way from the outside.

@FayeHadley 4 ай бұрын

Heck yes, thank you so much for the kind words. Danny and I are very real people doing very real work. I'm so glad it's relatable, that's my goal!!!

@tjwhite6705 4 ай бұрын

I am so excited for you. Can’t wait to see the next video.

@paulgallagher3122 4 ай бұрын

I Can’t Wait To Hear this thing wail!!!

@FayeHadley 4 ай бұрын

SAME!!!!!!😀😀😀

@robertmcgowan4149 4 ай бұрын

Faye you are incredible, your work is masterful. best always from New York City!

@rcfreak20 4 ай бұрын

Faye you are amazing! Love seeing your passion and skill come together for a project for you! Way to go Danny!

@FayeHadley 4 ай бұрын

Thank you so much!

@wademiyataki9221 4 ай бұрын

A “local machinist”🤣🤣🤣 Nice to see you folks allowed one of your biggest fans in the dino room.😁

@elainesoliz2205 4 ай бұрын

I see what you did there! And she did use a local machinist. He is also a Danny, just not our Danny.

@wademiyataki9221 4 ай бұрын

I see... I suppose that clarifies things

@bobmiller7426 4 ай бұрын

First, your 7M is beautiful. From all the parts you have fitted, I would love to see your build book! Must be fantastic! Can hardly wait for the numbers. Thanks for this series.

@FayeHadley 4 ай бұрын

I have an extremely thick 3-ring binder with meticulous notes on every modification 😅 it's extreme haha thank you!!

@johndoyle6697 4 ай бұрын

Hi Faye. Do you dyno your engine with the transmission after engine only session

@MrRanggong 4 ай бұрын

@@FayeHadley I would love to see a summary video of all the mods and parts youve done so far. What worked and what was just a time and money waster. Maybe with you and Danny sitting around discussing it. I think it would help keep all of us with 7M's from heading down a dead end.

@MrRanggong 4 ай бұрын

A VERY interesting video. Well done. I even did some research on PCV systems thanks to Danny's rant. Cant wait to hear that thing Roar!

@FayeHadley 4 ай бұрын

It's a deeper rabbit hole of research than I was expecting 😅 I may get a catch can, but I will definitely be pulling vacuum on my rings! Every time he talks I learn so much!!!!!

@JimmyMakingitwork 4 ай бұрын

The first post break in burn out will be epic!!!

@joejackson3415 4 ай бұрын

Joking of course, easy to watch and see you and those around you are truly professionals ❤! 😎

@rwd2006 4 ай бұрын

I've been so looking forward to this step! :)

@FayeHadley 4 ай бұрын

Me too!!!

@Danzilly 4 ай бұрын

Hey! Faye! Nice to here it come alive. The time and money you have invested will be worth it. It should last and give a lot of performance!

@FunWithCars716 4 ай бұрын

Nice job Faye! Small block Chevy is a great platform, too! Hope all is well love❤

@FayeHadley 4 ай бұрын

Never built one!

@FunWithCars716 4 ай бұрын

@@FayeHadley my first car was. 1979 Oldsmobile Cutlass and I removed the small olds V8 and built a 350 to replace it. That's how I cut my teeth wrenching 😉. But now you kids with all these JDMs have to go and build custom engine plates 😁

@kennethcallahan7410 4 ай бұрын

Excellent work Faye, very well done!!!

@FayeHadley 4 ай бұрын

Thank you so much!

@johnaclark1 4 ай бұрын

Ah, the first fire! A mechanic's nerves are never higher! I'm always nervous after a simple timing belt change...let alone all these modifications. Looking forward to the next video!

@FayeHadley 4 ай бұрын

SAME!!!!!!!

@joejackson3415 4 ай бұрын

Looks like serious business friend 😮😊.

@user-do8lr5sm5b 4 ай бұрын

Amazing work being done

@OcamRzr 4 ай бұрын

Love this! Wow that monster has a lot of wires... 😳 BTW That revolver cylinder 710 cap is also the bomb. 😜

@MikeyAlbertin 4 ай бұрын

Thanks Faye. Good to see Danny again. Now I know what break in oil you will be using. The Valvoline VR/1 is great oil too.👍

@user-hc1xp5cc1q 4 ай бұрын

I've only been involved in one dyno session and it was what I would say old school nowhere near what you have had to go through with all the electrical and computer hookups. Very impressive! Can't wait to see the results!

@01FozzyS 4 ай бұрын

Motor has come a long way,Faye! Looking forward to the dyno runs!

@richardsauer599 4 ай бұрын

Love your channel! Very excited to see it run. Great job!

@FayeHadley 4 ай бұрын

Thanks so much!

@simonilett998 4 ай бұрын

Looking AWESOME, Faye....and the 7M is looking pretty amazing too😁 That's a LOT of work most people would never quite understand, thanks for showing us. Say hi to Danny for me. Can't wait for the big day, hopefully on the next vid!! #7MN05HT 👍🤘🤣

@micahtolleson9735 4 ай бұрын

always so informative!

@rdoIs4info 4 ай бұрын

I quite enjoyed watching this video. It was both entertaining, educational, and for me thought-provoking. It left me awaiting the next installment where we get to see the engine run and make power. Thanks so much for sharing your hard work.

@joellosoya7098 4 ай бұрын

Love 💗 watching your videos Faye. Great work ,on what you love in doing. 💯👑

@JT-un7dc 3 ай бұрын

So true every 7M smokes like crazy.

@ifixem9585 4 ай бұрын

Good stuff...I remember building an old k24 single cam bare block for a 240sx when I was younger. Bored 30 over with 10.6:1 pistons, ran vp 105 and it made 187/196 at the wheels at 17* timing. Not anything to write home about but I was super proud of it. Old beater raised a few eyebrows on the streets lol. Keep it up girl!

@FayeHadley 4 ай бұрын

That must have been so fun to drive!!!

@ifixem9585 4 ай бұрын

@FayeHadley With the old 240's, if you know, you know lol.

@leonardcrespin6476 4 ай бұрын

awesome video Faye

@erichartke4331 4 ай бұрын

Wow intense setup

@jeffmiller6100 4 ай бұрын

Great video!❤

@mr.e2371 4 ай бұрын

Got to send some love to my favorite crazy chicken lady 😊❤

@carltondoorman9145 4 ай бұрын

Wow, that's a pretty impressive apparatus you've set up. Looking forward to seeing it run.

@FayeHadley 4 ай бұрын

Thank you!! I can't wait!!!!🤩

@intentsmodz 4 ай бұрын

It's nice when you can work on your own stuff, it's been over 6 months for me. The problem is we need more than just one free day, I've been spending mine relaxing so I don't get too stressed out. Just because there's a free day it doesn't mean anything is getting done. 😂 I need a vacation to be able to get anything done.

@FayeHadley 4 ай бұрын

I relate to this 🥲

@intentsmodz 4 ай бұрын

@@FayeHadley I'm sure you can relate to having more than one iron in the fire as well. Are you still doing All Girls Garage & Motor Myth Busters or whatever it's called? I've been so busy I can't remember what's what anymore. 😂

@paulferrara9079 4 ай бұрын

Oh we are not worthy. When I saw that bundle of wires ! You are so far ahead of me on electrical. I am still learning it as well. Electrical can be so humbling a learning curve. Please tell us you are using non-Ethanol blended fuel for your testing? Love your content. Folks sometimes think it's just an easy task to dyno an engine of any kind. Oh the time it takes to get this far into the build Wow. And still another bracket to make. That's gonna be so cool to see that engine getting tuned! ! : )

@todddewell6314 18 күн бұрын

Very cool Faye!!!!!!

@richardt1293 4 ай бұрын

Sheeesh, it's almost RUNNING

@FayeHadley 4 ай бұрын

Hey haven't seen you in a while!! 👋🏻

@richardt1293 4 ай бұрын

Hey Faye, yeah I've been around, just not very active on here, kinda miss the live streams dude.

@DericO-rz3be 3 ай бұрын

DANNY is a great dude!!

@coreysweigart4290 4 ай бұрын

Awesome!!!!

@marcussho 4 ай бұрын

Tip, pcv system air will need to go through the MAF if it has one! I’m sure u have it covered! Can’t wait for the run vid!

@FayeHadley 4 ай бұрын

No maf! I have a map sensor now!

@mikegoodman447 4 ай бұрын

I noticed a slight droop in the turbo drain back hose. The drain should go a straight as possible back to the pan and be above the oil drain level. The oil is wiped into foam and requires a good drain back. Also Danny refers to crankcase pressure > any pressure in the crankcase will cause the oil not to drain back as well. Nice!

@FayeHadley 4 ай бұрын

Like I said on the video, I had an interference issue with the motor mount so I had to come up with a temporary solution for while the engine is on the dyno. You can see my turbo drain tube here: kzfaq.info/get/bejne/eLB6iLlm1NXao4k.html Danny said vacuum has to happen in the crank case to seal the rings.

@KendrasEdge757 4 ай бұрын

Awesome!!! Wish I had a great yota mechanic near me in southeast VA, but I can handle most everything my 21’ ORP 4Runner could need for a good while lol. This engine is gonna be so nice! Can’t wait to see the projects progression!! Danny is an old school gear head knowledge bank that sadly rarely exists these days. Edit: that engine is absolutely gorgeous!! What are you putting here in?!

@FayeHadley 4 ай бұрын

Thank you!!! Yes, Danny is an absolute treasure. He has taught me so much and I'm so blessed to have him as a friend and mentor!! This engine is going in my light blue 1989! Toyota Supra 🥰

@KendrasEdge757 4 ай бұрын

@@FayeHadley ooooohhh that’s gonna be sick!!!

@Jake39019 4 ай бұрын

Love the build. With aem being bought out and shut down, maybe have a good back up plan for another standalone!

@FayeHadley 4 ай бұрын

It was the cream of the crop when I bought it in 2019😢 I'm just gonna stick with it for as long as possible!! They're pretty bulletproof!

@overbuiltautomotive1299 4 ай бұрын

Sweet i love my 5m and 7m

@michaelratliff7775 4 ай бұрын

Fantastic! 😎

@FayeHadley 4 ай бұрын

Thanks! 😃

@johnmbell4642 4 ай бұрын

Hey Faye, saw the title to the video and said we’re getting close can’t wait to see and hear it in the car but enjoying the process it’s been a journey Very interesting and educational. I hope everything goes well. I’m sure it will have a great one as always.P.S. what were you feeding the chickens?🐔🐔🐔👍

@FayeHadley 4 ай бұрын

I was feeding them some beef fat!! And thank you I'm so excited to hear this baby run!!!!!!!😃😃😃

@wemerson29 4 ай бұрын

Awesome

@stco2426 4 ай бұрын

Fab!

@gedavids84 4 ай бұрын

Seeing that wire spaghetti reminds me of my first megasquirt build. I was actually shocked when it fired up on the first try. Good luck with your dyno session, what turbo are you going with?

@danafaulhaber334 4 ай бұрын

@Fayehadley Oh wow i never knew how much went into setting up an engine on an engine dyno like that. I knew there was bit more invovled to it since you went from a sbc to your 7m but still has alot to do to get it all setup. Your 7m is looking amazing an all that work you have put into it mocking everything up multiple times makes the final setup & install go so much smoother plus the engine will run so much better since you have set up everything a few different times.. Faye where did you find that awesome oil fill cap at?

@JonnyJetson754 4 ай бұрын

You are awesome jus sayin 💯

@southernman7692 4 ай бұрын

put a big block chevy in that wood be bad ass

@benburns8435 4 ай бұрын

Your so bad ass❤❤❤

@joejackson3415 4 ай бұрын

Fox!❤

@louietramposch4559 4 ай бұрын

Longest relationship is with a car 😅🤟👽🔧

@FayeHadley 4 ай бұрын

100%😅

@chrisunderhill8853 4 ай бұрын

ram wire connectors. Nice work looking sexy cant wait to hear it run! all good things come to thoes who wait.. heh my mom used to tell me that.

@bigsarge2085 4 ай бұрын

✌

@BoostedGeeks 4 ай бұрын

Hey Faye. Ran across you during your 4runner videos. Not trying to flex here but I have 8 mkivs, r33 and a few 300zxs (all slicktops), which I plan on doing a JZ swap soon on one. I also own the Silver Supra that's gone viral on KZfaq that comes out of no where. I want to start a KZfaq build eventually and was wondering if you would like to do a build together? I have one mkiv that I am bringing from overseas and I think that would be a good candidate. Let me know and keep up the great content. ☺️

@RBFR01 4 ай бұрын

What's break in oil and why is it better than just regular oil?

@nik557 4 ай бұрын

What oil pump an oil pick up screen are you using ??

@avimedina6562 4 ай бұрын

What head are you guys using?

@johndoyle6697 4 ай бұрын

Hi Faye. What are your goals for the engine hp and torque wise. We know it will run as you built it.

@FayeHadley 4 ай бұрын

Hoping for a reliable streetable driver more than hp, but I'll be very happy with 500hp 👍🏻😁

@Bassotronics 4 ай бұрын

I want to Dyno my “sucky” Hyundai GDI engine just to see it explode.

@gadgets7070 4 ай бұрын

Faye is sunshine mixed with nitro

@Canthus13 4 ай бұрын

So.. Whose blood is all over the adapter plate?

@samuelrock5809 4 ай бұрын

Plz be my lady!!!!!!!! 😂😂

@joejackson3415 4 ай бұрын

Guess I'm old school and stuck on 10-40

@COMP-oc8lt 4 ай бұрын

FFFFFFuunnnn

@joejackson3415 4 ай бұрын

Your all fired for not answering 📞 😢

@Skidderoperator 4 ай бұрын

No face tats?

@20_below 4 ай бұрын

This what happens when you are extremely bright, get exposed to old Toyota's and haven't recognized God's calling for you yet.

@JJJ-zs5nw 4 ай бұрын

So why does it cost so much? Looks like it took you 20 minutes😂😂😂😂

@YOUARESOFT. 4 ай бұрын

INSANITY

@WAYUPDUDE1382 4 ай бұрын

@danielsmith-ze3wy 4 ай бұрын

Awesome