The BEST WAY to Organise the DeWalt Toughsystem 2.0!

Рет қаралды 502,774

Күн бұрын

We have just got our hands on the new DeWalt Toughsystem 2.0 Toolbox stack and decided to put it to the test, by organizing an entire collection of DeWalt Power Tools into the stack with Shadow Foam.
That's a plainer, circular saw, table saw, multi-tool, torch, charges, laser level, heat gun and more, all those tools organised and fitted perfectly into the ultimate visual organisation tool - Shadow Foam!
Have you got the DeWalt Toughsystem 2.0 at home? What do you think? Give us your thoughts in the comments below, and whilst you're there let us know if you want to see Jonathan tackle anymore Toolbox systems in future videos!
00:00 The Entire DeWalt Tough System 2.0 Review
00:33 Collecting the Entire DeWalt Power Tool range
01:44 The best way to organise your DeWalt Toughsystem 2.0
04:33 Please Subscribe!
04:44 How to cut a Circular Saw into Foam
09:09 Organising the standard Toughsystem Toolbox
10:10 Cutting Shadow Foam for the DeWalt Toughsystem Trays
11:03 Creating a deeper foam insert with this GENIUS HACK!
14:29 Cutting Shadow Foam for the DeWalt Toughsystem Draws
14:47 Check out the Entire DeWalt Toughsystem 2.0 ORGANISED!
Have a SUGGESTION of what you want to see NEXT? Comment below!
Get Your DeWalt Foam Inserts Here:
www.shadowfoam.com/dewalt-foa...
SUBSCRIBE for more videos:
bit.ly/SFSUBSCRIBE
Watch our LATEST VIDEO:
bit.ly/SFVIDEO
Made possible with Shadow Foam, get yours here:
bit.ly/SHADOWFOAM
FOLLOW US ON
Facebook: / shadowfoam
Twitter: / shadowfoam
Instagram: / shadow_foam
KZfaq: / shadowfoam
Music:
All music if fully licensed for use in third party media by motionarray.com

Пікірлер: 351

@ShadowFoam Жыл бұрын

We are UPDATING our Toughsystem setup! Check out STEP ONE HERE - kzfaq.info/get/bejne/fNRjZ7Kbv6eVqok.html

@iwillbnnedafterispeakwhy6498 2 жыл бұрын

Is it just me or does anyone else believe that only the top box should be open top and the rest of the stack should be drawers?

@ShadowFoam 2 жыл бұрын

Nice to have the deep boxes too though for bigger power tools like the circular saw!

@whateyatalkinabout4972 Жыл бұрын

This is the exact set up I have, toughsystem trolley, 2 drawer boxes on the bottom and the large box on top. Batteries fit snug in the bottom drawer, then drill bits second drawer, accessories 3rd and 4th and power tools on top. Makes it easy to load into the Ute as well as the heaviest box is on top so no bending and it stacks better too in the vehicle so I have access to batteries etc without having to pull the whole lot out. Dewalt should consider making a larger drawer box with built in wheels

@kirk422 Жыл бұрын

Great set up , depot recently stocked 2 drawer box, I grabbed 2 and I'm going to modify both of them to one deep drawer by cutting out bottom of top drawers and attach together with t washers and strips of cut offs making deep drawers/ chest style for bigger 7¼ saws rear handle 899 sawzall jigsaw, cordless router / accessories

@AndrewHelgeCox Жыл бұрын

Not lockable and not as waterproof, but ideally yes.

@mon.a1177 Жыл бұрын

Depends on the user but i'll go with you on that one

@djs9pd Жыл бұрын

I've been looking for something like this video forever. Been looking at how people organize their tools in the Touch System and have had a hard time finding anything that isn't just Dewalt marketing pictures of tough guys walking around in mud with their tool boxes

@ShadowFoam Жыл бұрын

Walking around in mud with their toolboxes 😅

@JR-pf7kk Жыл бұрын

😂😂😂

@Utubeisazzho Жыл бұрын

They used to drink bud but now we hate mud

@cookdislander4372 Жыл бұрын

Hahahaha tough guys in the mud lmao 😂😂😂😂

@ShadowFoam Жыл бұрын

So happy to see so many of you enjoying our video on the DeWalt Toughsystem stack organised! What do you all think of tool walls? Would love to hear your views on this tool organisation project we've just finished: kzfaq.info/get/bejne/g8CCoNuZzLOuk58.html

@sbrenaissance9 Жыл бұрын

exactly what I was looking for. The best setup for my needs. Thanks for sharing it.

@ShadowFoam Жыл бұрын

My pleasure mate, let me know if i can help with anything else 👍

@sbrenaissance9 Жыл бұрын

@@ShadowFoam I want all my tools to be organized this way with a toughsystem 2.0 inlcuding shadow foam. My work will be easier once I'm done with everything. Thanks again for the idea.

@chillios2222 5 ай бұрын

the drawer pieces i have found the most usable , no flipping lids , works well stacked

@chrishayes5755 Жыл бұрын

Pretty basic but awesome product. Thanks for the helpful tutorial. Hope your biz is going well!

@ShadowFoam Жыл бұрын

Thanks Chris, not going bad at all!

@Liveforwhatyougive 3 ай бұрын

This is great 👍. I bought the Dewalt Tough System boxes and dolly after viewing this video just so I can use the Shadow Foam inserts for my tools lol!

@treyb387 Жыл бұрын

This was the most satisfying way to organize tools ever

@ShadowFoam Жыл бұрын

Thanks Trey, have you seen our other toughsystem videos?

@supremeoverlord4957 18 күн бұрын

Dude Freaking Awsome i love it when i get my tough system 2.0 im also getting the shadow foam !!!

@iplayzthegames6968 Жыл бұрын

It's funny seeing how other people organise because to me my go to tools are a circular saw and an impact. My combi gets so little use I almost regret buying it but it comes in handy now and then

@ShadowFoam Жыл бұрын

What do you carry your tools around in?

@jameswkndmechanic174 Жыл бұрын

Amazing. Quite impressive!

@ShadowFoam Жыл бұрын

Thanks a lot!

@gwall1789 Жыл бұрын

I was so excited seeing this. I went to the website to put together a list. Holy moly, I have to take a second mortgage out on my house to buy it. LOL

@ShadowFoam Жыл бұрын

International shipping?

@RoryIsNotACabbage Жыл бұрын

You should take the cut out from the circular saw and stick it down on top the foam under where the motor is. It would fill in the space enough to stop it having as much movement but still only use the material from one layer

@ShadowFoam Жыл бұрын

Very good idea there mate! 👍

@logan481 Жыл бұрын

I notice your small top box you put your drill and impact in has a handle on the very top. I can't find one with a top hand on the lid. Where did you find yours?

@jim99ful 17 күн бұрын

looks great, job done

@ShadowFoam 17 күн бұрын

Thanks Jim! 👍

@KaizenSteelDrums Жыл бұрын

This guy is really in to foam. Impressive. I got to get me some.

@ShadowFoam Жыл бұрын

www.shadowfoam.com my friend 👌

@whateyatalkinabout4972 2 жыл бұрын

A more efficient idea with the toughsystem 2.0, you’d need the trolley though for this, is to put 2-3 sets of drawers on the bottom, a large box on the top and then half box organisers above that. Obviously with 3 drawer systems and a the half organisers it can be pretty high, but it means you don’t have to unstack anything. I run 2 drawers, large box and 2 half organisers. Fits everything for carpentry

@ShadowFoam 2 жыл бұрын

Sounds like a great setup! Would be even better with some Shadow Foam keeping your tools organised, safe and secure! 👍

@whateyatalkinabout4972 2 жыл бұрын

@@ShadowFoam I’ve got some kaizen foam, not sure if there is a company that makes pre cut inserts in Australia. If they do I’d be down to get some. Although foam does take up ALOT of space. If anything I’d use it mainly for my hand tools/drill bits and loose pieces etc. tools themselves may not be practical space wise

@majstrujeme8352 Жыл бұрын

Hello batteries and accessories like bits and lasers sure good to have foam. Other stuff just line the box with thin foam and it is muuuuch more space efficient

@whateyatalkinabout4972 Жыл бұрын

@@majstrujeme8352 batteries are pretty robust these days. You could get away with lining the box as well but lining it with foam is annoying. You either need to glue it in or find a way to fix it. Maybe Velcro otherwise you will destroy it

@DGALVIN45 Жыл бұрын

@WHATEYATALKINABOUT do you have a video you can post showing your set up. GC here, but mostly do kitchen installs and finish work. I've been trying to figure out a way to set my cart up

@xXBantamXx 2 жыл бұрын

Love it, now you just need to make inserts for my 1560 pelican case.

@ShadowFoam 2 жыл бұрын

What do you plan on putting in that case?

@xXBantamXx 2 жыл бұрын

@@ShadowFoam my deWalt drill and charger in the bottom layer and my other hand tools in the layers above .

@gabedestellano Жыл бұрын

OMG that Rowan clip KILLED ME!!! 😂🤣😅😂🤣

@ShadowFoam Жыл бұрын

😂😂 it’s all I hear when anyone says bottom

@barisgursoy9725 2 жыл бұрын

Perfect Jonathan 👏👏👏👏

@ShadowFoam 2 жыл бұрын

Cheers Baris! You seen any of my other videos?

@barisgursoy9725 2 жыл бұрын

@@ShadowFoam Cheers Jonathan, I seen all of your last videos.

@42RHD Жыл бұрын

Huge thanks. My current storage system is a mess! I so need to up my game!

@ShadowFoam Жыл бұрын

Give us a bell when you get it organised!

@christopherellis2324 Жыл бұрын

Damn this is awesome. Going to have to buy these foam inserts for my kit

@ShadowFoam Жыл бұрын

Let me know how you get on organising your kit! 👍

@christopherellis2324 Жыл бұрын

@@ShadowFoam so I got online and checked out the prices, shipping is a killer for me being in Australia

@frankierwhereyouralwaysast903 Жыл бұрын

This was awesome!!! ❤

@ShadowFoam Жыл бұрын

Thanks Frankie! Are you a DeWalt fan?

@frankierwhereyouralwaysast903 Жыл бұрын

@@ShadowFoam yes I actually am.

@effervescence5664 2 жыл бұрын

I think I'll just buy your sheets for my van vaults, very nicely done though.

@ShadowFoam 2 жыл бұрын

Let us know how your van vault project gets on with Shadow Foam, we love a good van project! 😀

@MrWheezyE420 6 ай бұрын

My man, you literally have the oscillating multi-tool sitting in one of the boxes during this whole demonstration. Just use that! It even has a foam cutter attachment for exactly this purpose, would make this job so much smoother. Make the tools work for you and work smarter not harder.

@ShadowFoam 6 ай бұрын

would be faster, but wouldn't be as precise and therefore wouldn't do as clean a finish

@projectrebuild908 Жыл бұрын

Great finsh. It just makes any tool box of that style more usable. Do you have any products that can be added to prevent bacteria build up. I come from a catering background and this foam would be great to organise chef boxes but I fear they will harbour bacteria in that application.

@ShadowFoam Жыл бұрын

Couldn;t say for sure to be honest, we've never had anyone ask us about that kind of application. If you can enlighten us, I'd love to know!

@MrAlan113 2 жыл бұрын

how do you guys use this system in residential settings. I've tried them but once i get to some stairs its useless packing everything like that. So i just went back to carrying everything in bags.

@ShadowFoam 2 жыл бұрын

We didn't find it too difficult dragging the system up the stairs, having it on wheels certainly helped!

@OnyxVortex 9 ай бұрын

This is a cool idea for fragile items like stage lights or sensitive musician tech. I think it makes dewalt look sharp although I've dropped my dewalt tools from 10 feet on ladders to concrete and they still hold together and work. This looks like you can drop your whole toolbox from a 3rd story building roof and your tools are gonna be unscratched. Maybe a good idea for a video bud.

@ShadowFoam 9 ай бұрын

Might be something we've considered... 🤔

@rileywillard139 8 ай бұрын

I have some DeWalt tools and I do not want to test there durability but I know Milwaukee is just about indestructible

@chriscuthbertson Ай бұрын

I'm planning on building something to store my detailing tools and products, will chemicals damage the foam?

@KevinNguyen-zn4vv Жыл бұрын

I bought a bunch of tool hangers and battery holders, rivet nut them to the box and called it good.

@ShadowFoam Жыл бұрын

got any pictures of that mate?

@eoinmurphy8360 2 жыл бұрын

Brilliant video show foam quite expensive tho to buy that amount

@ShadowFoam 2 жыл бұрын

But for what you're saving in protecting your tools and ensuring none get lost or stolen is far greater than the price of the foam! Thanks for commenting though mate, we appreciate the feedback 👍

@softmetals3702 9 ай бұрын

Heat the deep tray while pushing down on top of the circular saw,it should melt to form just enough to seat.

@salvatoresalvio204 2 жыл бұрын

BELLO, INTERESSANTE ED UTILE VIDEO. COMPLIMENTI. SALUTI SALVIO

@PLBL Жыл бұрын

Do you have a way of cutting the foam in a non manual way? Like a CNC or something- seems like the next step for you guys is having an option where you have pre-cut foam options (e.g for the most common tools). And if this is feasible, maybe eventually even a “customise” option on your website where you charge extra and the customer can design their own layout. You could have templates for certain commonly used tools, and then an option to draw your own tool and set the depth etc. Is this possible/viable? Because in my opinion your biggest barrier is that it just seems like it takes ages to cut and peel it manually.

@ShadowFoam Жыл бұрын

It is something we have considered, but the cost is just too great and we pride ourselves on the affordability of our foam. There are lots of CNC options out there and Shadow Foam has been specifically designed to be a cut and peel foam. Of course, customers can buy the foam from us and then send it to be converted elsewhere, but it's not part of our business model. Interesting idea though!

@hunglow7199 2 жыл бұрын

I would love to use the product. I checked out the website and don’t see any pre cut inserts for the craftsmen boxes. Any plans to makes some?

@ShadowFoam 2 жыл бұрын

100% We'll announce them on this channel first too so stay tuned!

@Liveforwhatyougive Ай бұрын

Johnathan, can you do a tool organization video like this but for the tough system 1.0. That would be awesome. Bummed out dewalt doesn't make tool trays inserts for the 1.0 system, definitely would be able to utilize wayy more space in the boxes. Thinking to build my own tool trays or modify the small included handled trays which are relatively useless. Or just make the move over to the 2.0 system. Great video man

@joeystork57 2 жыл бұрын

Looks good I just have my DeWalt tools thrown in a deep Craftsman tool box drawer. Are there inserts for craftsman tool boxes like the DeWalt tough boxes?? Stay safe!!

@ShadowFoam 2 жыл бұрын

Couldn't have said it any better Bruce! Although, if you need any assistance Joey, do let us know! 👍

@recyclespinning9839 Жыл бұрын

Looks good, all this organization and foam keeps them in place. Only problem is when you stack them together you can't get to your tools. On a big job site you just unstack them , and I put them on a small rolling scaffold, HOWEVER ,, in a customers home or apartment on smaller job the drawers are better, also somebody needs to design the bottom rolling tool box to access tools without unstacking the others. Stanley has one but it's smaller and not as durable..

@ShadowFoam Жыл бұрын

A good point and definitely something we can do in a future video as the foam is so versatile!

@bibhutipanda751 Жыл бұрын

Awsome

@ShadowFoam Жыл бұрын

Thanks 👌

@bladimirurias189 3 ай бұрын

Do you have anything for flex stack box

@glockman9c 7 ай бұрын

Nice!

@ShadowFoam 7 ай бұрын

Thanks mate! Got any toughsystems?

@glockman9c 7 ай бұрын

@@ShadowFoam - debating. We have the rolling box on sale for $90 and the large box on sale for $60 right now so I am thinking about stocking up.

@turvonc Жыл бұрын

I see a few new toys to add to my collection

@ShadowFoam Жыл бұрын

Which ones?

@christophercrawford2736 2 жыл бұрын

“We’re not gonna be looking at the toughsystem 1” and then proceeds to use tough system 1 drawers.

@huythuan722 2 жыл бұрын

Tuyệt vời đẹp và chất lượng dewart., ước mơ của mình là có được một bộ máy này để làm việc thì tuyệt vời.

@ShadowFoam 2 жыл бұрын

DeWalt nổi tiếng với việc biến ước mơ thành hiện thực

@whiskey_heathen7772 Жыл бұрын

Is there a complete list of boxes and foam sizes quantity ECT for this exact setup?

@ShadowFoam Жыл бұрын

www.shadowfoam.com/dewalt-foam-inserts/

@id104335409 4 ай бұрын

If I organise my toolbox that way I would never bring it to a job site 😂! Too pretty to mess up!

@ShadowFoam 4 ай бұрын

😅

@justaguy7477 3 ай бұрын

With the volume of tools that I bring to each job site I would need 3 rolling stacks doing it this way.

@davidstokes9706 6 ай бұрын

I'm getting the Toughsystem 2.0, 3 pice set, the 2 drawer, and a deep & shallow tray insert. Basically, what you just did here. What and how many do I need to do it like you did here? If i were to sit the circular saw more flat, would the deep tray then fit? Obviously, i would need more foam for the botom layer. TIA

@ShadowFoam 6 ай бұрын

I don;t think that cicrcular saw is fitting in the deep tray

@zachyontosh7587 Жыл бұрын

Cut the foam all the way through. Then cut the desired height off the cut out piece and put it back into hole. Instead of ripping foam

@ShadowFoam Жыл бұрын

Get what your saying Zach but it sounds like going the long way around 😄

@matthewgibney8532 Жыл бұрын

What size foam was used for the 2 drawer boxes?

@ShadowFoam Жыл бұрын

50mm inserts, available here: www.shadowfoam.com/product/dewalt-toughsystem-drawers-foam-insert/

@eclecticgentleman Жыл бұрын

Do you offer free shipping to the U. S. A.?

@relent107 Жыл бұрын

3:38 did you just slam slap that on and it locked??? XD Nice shot!

@ShadowFoam Жыл бұрын

No need for a take 2! 😅

@ArrakisOCE 9 ай бұрын

Can you use the battery charger while it is mounted in the foam (or is it dangerous due to poor ventilation)?

@ShadowFoam 9 ай бұрын

We’ve not had any issues with it, but if you have any doubts, better to be safe then sorry!

@ArrakisOCE 9 ай бұрын

Thankyou for that and for the great videos. I just saw the DeWalt dual charging box which is ideal - might order some foam inserts for that!

@hangingwithtanner 5 ай бұрын

You should make inserts for the flex stack packs.

@ShadowFoam 5 ай бұрын

Stay tuned! We’ll be covering Flex! 👀

@sickbale Жыл бұрын

Me, a Bosch Pro owner looking at the brands on the site: "Am I a joke to you?"

@Lee-lb9qh 2 жыл бұрын

Better than packout

@MotorcoachTony 5 ай бұрын

It makes total sense. But I like having a big box on the bottom for larger/heavier items, like a circular saw, but I want it to be a drawer, too. Especially if we're shorter, we don't want to have to get a stool to reach the top box. lol Have you seen NEW SK Modular System. It's BRILLIANT!!! Single big drawers, multiple drawer combos, and 2 ExtraLarge DOOR options. They currently only come in green, but I'd paint it Yellow for my DeWALT system. I'd link a photo, but don't know how. lol Was just in my news feed today. They're already selling on Amazon in USA. Jonathan I hope you can check this system out and review it. It's a USA made product, but I don't know if it's being offered in UK yet.

@ShadowFoam 5 ай бұрын

I haven’t heard of it, but after that glowing endorsement, I’ll check it out! 👍

@nutzthomas Жыл бұрын

does anybody know where or if you can buy an extra black tray they give you with the xl box for the top?

@ShadowFoam Жыл бұрын

I too would like to know this, anyone got any idea?

@nutzthomas Жыл бұрын

@@ShadowFoam iIeven contacted dewalt and they said that they don't sell it separate

@ShadowFoam Жыл бұрын

That's a shame but thanks for letting us all know!

@carlg1452 4 ай бұрын

Can u find a good box for the dewalt nail gun one supplied is rubbish

@Oceancharter 8 ай бұрын

just an idea - supply customers with easy templates for all different tools, chargers and batteries

@ShadowFoam 8 ай бұрын

wouldn;t it be easier for customers to use their own tools as templates?

@verohandymike 2 жыл бұрын

This may sound lazy of me, but why don't you sell precut foam inserts?

@ShadowFoam 2 жыл бұрын

We do sell precut foam inserts for an impressive amount of toolboxes and trays. Check out our range at www.shadowfoam.com

@rubenayala1222 Жыл бұрын

I went to your website how do I know which foam pieces go to what tough system 2.0

@ShadowFoam Жыл бұрын

Check out our DeWalt section here: www.shadowfoam.com/dewalt-foam-inserts/

@RXQ003 Жыл бұрын

I see the pros, and I see the cons. My lrg bottom box holds: Jigsaw Saws All Circular Saw Bluetooth Radio X2 Squares SML Blower and a SML Dewalt bag of random stuff. This would limit my space immensely. but my MED box is full of other crap that could definitely use something like this to hold it all in place rather than moving around on trip to trip.

@ShadowFoam Жыл бұрын

Completely fair and valid comments here my friend!

@nathanbinder5900 Жыл бұрын

This was my thought exactly - I've kept my tools in the manufacturer's boxes and put them in the Tough System boxes. However, for my handheld tools, drill bits, etc. that would just be laying down anyway, this is a fantastic idea!

@noesantos3638 3 ай бұрын

Three drawer on wheels would be the best system set up

@damionrussell482 Жыл бұрын

Can the latches be replaced if they break

@ShadowFoam Жыл бұрын

Not sure, anyone got any answers in the comments?

@MrtinL1 10 ай бұрын

Do you guys ship to Denmark? Love your product!

@ShadowFoam 10 ай бұрын

All our shipping options are available at www.shadowfoam.com

@cookdislander4372 Жыл бұрын

This one is a 60% cheaper than milwaukee in New Zealand. Im gonna have to go with it

@ShadowFoam Жыл бұрын

You won't regret it! We love a DeWalt!

@brandonw4315 Жыл бұрын

Do you have pre-cut configurations

@ShadowFoam Жыл бұрын

Visit our website! www.shadowfoam.com/shadow-foam-inserts/

@ibby81ae Жыл бұрын

Can the draw be placed under the load of the first two boxes?

@ShadowFoam Жыл бұрын

see no reason why not

@ibby81ae Жыл бұрын

@Shadow Foam I've noticed at the beginning of the video you have the draws on top of the bottom box and at the end of the video, the draws were above the medium box, which draws placement did you end up with?

@dannymorales6200 Жыл бұрын

The top would be drawers for me

@stevensmith8458 Жыл бұрын

I would absolutely love to purchase this foam for my tough box, but the shipping is double the cost of the foam 😪

@ShadowFoam Жыл бұрын

Sorry to hear that, please drop my team an email at hello@shadowfoam.com

@nigelwest7852 9 ай бұрын

Do the yellow trays fit the original Toughsystem?

@ShadowFoam 9 ай бұрын

Not sure, anyone in the comments know?

@ivanrico961 Жыл бұрын

Forwarding this to wife.

@ShadowFoam Жыл бұрын

Let me know how that goes down 😅

@RikoRey92 2 жыл бұрын

DeWalt team: I have a great, idea let's make organizers that are absolutely not compatible with our other 2 lines of organizers so our customers have a harder time organizing!!! I love DeWalt but they need to put more attention in their products

@ShadowFoam 2 жыл бұрын

What's your DeWalt setup look like?

@RikoRey92 2 жыл бұрын

@@ShadowFoam i got tough system 2.0 boxes, but I'm definitely gonna change to the drawers so i don't have to unstack to reach the bottom tools, I also have a couple of tools that came with their case but it's TStak so they're not compatible with TS2.0 and than the case for all my drill and impact bits aren't compatible with TStak or TS2.0 🤦‍♂️ I don't know why they don't just stick with the tough system and make drawers and face opening boxes like a cabinet. They're lacking innovation in all their other products, but their Power tools are great

@nsatoday 2 жыл бұрын

They do need to reduce systems. TStack, T2.0, the other organizer system they seem to use. It’s just too much.

@iitzDiRTY Жыл бұрын

All my power tools are dewalt but I had to go Milwaukee packout for my organizers. The packout is Just hands down superior to toughsystem in almost every way

@Bodhi1satva 11 ай бұрын

I’ve spent too much on Tstak to change now. This constant changing so we have to buy something else is a good way to lose customers

@neilhowarth9362 Жыл бұрын

Do you foam for the magnusson boxs

@ShadowFoam Жыл бұрын

We do indeed, it's available on our website www.shadowfoam.com

@mogulpro 2 жыл бұрын

I have 90% of my tools Dewalt, but you cant compete with the Packout ... so i'll put my yellow tools (minus the red cordless nailers) in my red packout.

@ShadowFoam 2 жыл бұрын

Prefer the DeWalt tools do you?

@campbellfulton7069 Жыл бұрын

I have a workbench and i really want some

@ShadowFoam Жыл бұрын

All available on www.shadowfoam.com

@campbellfulton7069 Жыл бұрын

Ok thanks I will have a look

@newmexicomountainliving6113 Жыл бұрын

When I go to the website, the cost is in euro. Is there a way to change that to U.S. currency?

@ShadowFoam Жыл бұрын

We only sell in GBP at the moment as we are a UK company

@jimsandall2073 2 жыл бұрын

While the foam looks cool I just don't get the why. 4 tools in the deep bottom box in foam while I get 7 in a Tstak bottom box which is a little smaller plus blades, grinder wheels, 2 5 amp batteries and sand paper. Next deep box up I get 6 tools plus 3 small tough boxes with bits and blades. Foam seems like a lot for tools that get dropped off ladders, roofs and kicked around. Pack the boxes right and there won't be any travel damage. With foam I would need 20 boxes to haul my tools around.

@ShadowFoam 2 жыл бұрын

Can completely get what you're saying but there are ways to pack more tools into the boxes using foam, and foam is also a great way of visually keeping track of all your tools and where they are, along with keeping them safe and protected. As Jonathan mentioned at the end, we've left a lot of space in the foam to add items along the way. Thanks for the feedback though, its much appreciated! 👍

@Tre16 2 жыл бұрын

Some people don't treat their tools like garbage.

@jimsandall2073 2 жыл бұрын

How is packing tools in a box treating them like garbage? We're just smart enough to know that they don't need placed in foam. I figure the want to be wood workers think the foam is cool but I have never seen a real wood worker put his drill in foam at the end of the day after it has been dropped 5 plus feet at least once a day.

@mickw1523 Жыл бұрын

I wondered what Peter kay was up too.. 😄

@ShadowFoam Жыл бұрын

Think he's on tour in Manchester mate, saw it in the paper!

@dannymorales6200 Жыл бұрын

Make something for the top so you can look up and pull out batteries mate.

@brandonarchibald Жыл бұрын

Matching shadowfoam underpants

@ShadowFoam Жыл бұрын

We'll consider adding those to our product range!

@brandonarchibald Жыл бұрын

@@ShadowFoam Love the channel! Love the product (other than the shadowfoam panties) will be ordering some for my shop 🥳

@tithrepair-Makita-mikaza Жыл бұрын

❤❤❤❤❤

@ShadowFoam Жыл бұрын

Dewalt fan?

@tk2097 8 ай бұрын

I love this but I'm too tight to buy it 😂

@ShadowFoam 8 ай бұрын

haha fair plays mate

@phillipwickens8488 Жыл бұрын

What thickness is the foam ??

@ShadowFoam Жыл бұрын

We offer it in 3 sizes - 30mm, 50mm and 70mm

@jamesabel2573 2 жыл бұрын

You know being from America I almost need sub titles

@ShadowFoam 2 жыл бұрын

Welcome to the North of England lad! 😂

@1232bluejays Жыл бұрын

It's not that bad he didn't say "bloody hell " once. But he did say bits and bobs

@jonathanmarois9009 5 ай бұрын

My OCD has been satisfied, for today.

@ShadowFoam 5 ай бұрын

Come back tomorrow and check out the rest of the videos on our channel!

@patriciaweber9832 Жыл бұрын

im putting my tools lose but still nice and save tons of room this way.

@ShadowFoam Жыл бұрын

Thanks Patricia, you a Dewalt user?

@elliotbrown9650 6 ай бұрын

DeWalt need to make a base unit drawer for the circular saw and planner no point if you have to detach 7 draws just to get the tool you need

@ShadowFoam 6 ай бұрын

I would love to see that too! 🙏

@gabedestellano Жыл бұрын

What do YOU know about cutting foam? 😂🤣 Great vid, mate! Come organize my shitemare, please!!

@ShadowFoam Жыл бұрын

Shitemares a new one! 😂

@gabedestellano Жыл бұрын

@softmetals3702 Жыл бұрын

my tools don't complain banging about with each other, i fit almost all that stuff in half the storage space and that's what matters in a shop on wheels, they really don't complain like some inmates mates. it's pretty tho

@ShadowFoam Жыл бұрын

Fair enough, there's also the visual organisation aspect to consider

@softmetals3702 Жыл бұрын

@@ShadowFoam well i ended up doing one and now looking for the 4th drawer set ,i tried it with the 70inch tv packing foam white but so they do look neat

@scottnever8732 25 күн бұрын

as great as it looks, in my opinion the foam takes up so much room that can be used as storage.

@jacksonwentzel7434 2 жыл бұрын

Why are the dewalt batteries 18 volt instead of 20 volt

@alek-by7rm 2 жыл бұрын

It's the same, it depends where you buy it (USA 20v, Europe 18v, etc.) . I've asked myself the same question, when they say 18v, that's an average, and 20v is the maximum voltage. I currently use both 20v and 18v batteries on my tools and there is no problem.

@TheCorkConnect Жыл бұрын

Available in the USA?

@ShadowFoam Жыл бұрын

Not yet but we do offer international shipping on our website, drop an email to my team at hello@shadowfoam.com and we'll see what we can do for you!

@rnb0234 2 жыл бұрын

do yall ship to the US?

@ShadowFoam 2 жыл бұрын

we do indeed, check out our website for all the details www.shadowfoam.com

@sezersonmez9337 Жыл бұрын

I want using dewalt but very expensive in turkey 😢

@craigandrews5511 2 жыл бұрын

Would have been nice to show the Tough System job box.

@ShadowFoam 2 жыл бұрын

Would you like to see a future video on that?

@digbick6961 Жыл бұрын

Every like goes to getting buddy a larger shirt, anything helps.

@ShadowFoam Жыл бұрын

Buddy the elf?

@markdeartola1154 10 ай бұрын

I’ve been looking at many different box systems and while many have awesome features, I think the ones that launch from the front like Milwaukee r just the best. I don’t like having to u do side latches. I like sliding it on and off from the front. Much less hassle and easier when ur reaching for it in the truck