Hi , sharpening a convexe knife is like sharpening a axe , the edge is the knife vs a little secondary bevel on the regular knives . Thx for your video , i take the bravo 1 original rampless .
@shane41766 ай бұрын
Yes sir exactly correct
@JimmyMeatwhistle5 жыл бұрын
I just picked up a Bravo 1 CPM 154, about time I bought one! Nice videos too
@Seklart7 ай бұрын
I have a Bark River Bravo 3V steel. It has a convex blade, but for some reason the factory sharpened the last fraction of the outer edge angled instead of convex. I don't know why they did that, but I believe it makes the edge more brittle. I accidentally tapped the edge lightly on a rock surface, and two tiny chips came off.
@shane41767 ай бұрын
Yeah sometimes they come with a slight v edge. I just take mine to water stones and convex them
@49giants36 жыл бұрын
I love the scales on the LT. I have one as well, and the grizzly cub. Both are black micarta. Thanks for the video
@MrCrapheadist5 жыл бұрын
I notice your Revzilla box. Knives and bikes baby!!!
@shane41765 жыл бұрын
Lol good eye Brandon good eye!
@sherwinpalacio32272 жыл бұрын
Love the Bravo 1!!!
@kingkong54835 жыл бұрын
Thanks for the wonderful review!!! And I think your opinion re: the feel of each blade, is scientific and does count for a lot, IMO! I think it is clear-all these blades are superb performers!!! But, it will help those to decide which one they want to purchase....first!
@shane41765 жыл бұрын
You are welcome,thanks for watching!
@yt_life16107 жыл бұрын
good review man. I am quickly becoming a bark river knife fan. liked and subscribed!
@shane41767 жыл бұрын
G23 SR9C thanks so much it's greatly appreciated I'll hopefully getting a bunch more videos done this spring.
@cjm98607 жыл бұрын
damn those Feathersticks are beautiful. awesome tattoo btw.
@shane41767 жыл бұрын
NE Bushcraft haha thanks my friend!
@fuzzlenuff7 жыл бұрын
That's a good review.
@shane41767 жыл бұрын
Billy Two Knives thanks man I really appreciate that!
@damienhaire95307 жыл бұрын
Like your review style mate. Honest, Simple to the point. Layman's terms. A couple of questions...... 1. What steel is the gunny in?2. What are your thoughts on the 3V LT since this video?
@shane41767 жыл бұрын
Damien Haire sorry I just found out I had comments on some of my videos. The gunny was in A2 and I sold the 3v it was horrible to sharpen. I really love Fallkniven's 3g and VG-10. But brkt in A2 is a super good Steel all the way around and I highly recommend it.
@KENAHIGHLANDER5 жыл бұрын
Rice Creek bushcraft What do you use and how do you sharpen these knives?
@MrCN1737 жыл бұрын
Good review. I really needed to see the gunny side-side w Bravo LT ✅ thanks. I'm on the fence to buy a gunny since I already own an LT
@shane41767 жыл бұрын
AB173 the gunny is a great little knife. nice and slicey. If you get one and like the lt I'm sure you won't be disappointed in the gunny.
@ruleroftheundersky5702 жыл бұрын
I batoned my Bravo 1.25 LT 3V carefully through dead hickory a few times, and chopped it into the same wood (dead hickory) the overly thin edge took damage; ever so slightly flattened/chipped, and smushed a very-very tiny bit. The smush isn't damning by any means, but I can see it when I reflect light at the right angle. I connected Bark River about it, and now I await for their reply. It appears to me my knife was over sharpened which more than likely ruined the heat treat in the only spot really doing it which happens to be in the most used portion of the cutting edge. Oh... The edge also curves/swoops very mslightly when it shouldn't; hence the over sharpened assumption, etc. That is the spot having edge issues. Overall I feel the entire knife my have bad edge geometry; thins down to damn near Mora Companion thinness to quickly. Also the knife is listed at 5 inches, but mine measures in at roughly 4.7 inches. I've gone camping twice since I got it through pre-order, and it has let me down both times. The half ass convex is already so thin I'm not sure how to go about fixing it without making it worse. The knife basically from what I can make out needs reprofiled which will need the edge raised leading to an already shorter than advertised knife. A $300+ knife made of convexed 3V should eat through hickory all day long in my mind. Oh well... It's just my luck.
@MotoJunkie235 жыл бұрын
Great video showing the three knives, but they won't stay sharp for long with you banging the edge off other knives like that. That clanking sound is like nails on a chalk board
@vector83107 жыл бұрын
liked your style and sense of humor. subbed. The 3V was that difficult, huh?
@shane41767 жыл бұрын
ambivalent ambiguity it's great Steel and holds a good edge. Unfortunately it is quite hard to sharpen.
@christurnerct4912 күн бұрын
How hard are they to sharpen compared to a regular knife?
@shane417612 күн бұрын
@christurnerct49 it's just as easy just a little different process
@adamgrimes8203 жыл бұрын
Whats your favorite between the lt and standard bravo?
@shane41763 жыл бұрын
Depends but for most bushcraft stuff I'd get the lt.
@49giants36 жыл бұрын
Do you have a video sharpening your bark Rivers ? Imma new sub so excuse me if you do
@shane41766 жыл бұрын
49Giants no but I could make one!
@49giants36 жыл бұрын
Rice Creek bushcraft that would be awesome if you could my friend. I’d probably watch it 100 times lol
@kennywheelus68573 жыл бұрын
Awesome, have tried a puukko knife from varusteleka.com from Finland, terava jaakaripukko 110mm or 140mm, 100 is 4.5 inch blade an the 140 is what have is 5.5 Inches long an full tang with a rubber over molded handle, scandi grind blade with a drop point style an stout tip, they are 80crv2 carbon steel, razor sharp.
@shane41763 жыл бұрын
No but I wanted to get one. They do look very useful
@kennywheelus68573 жыл бұрын
@@shane4176 ,oh ok,yes they are an tough too for a decent budget bushcrafter knife, sheaths are nice too.