You can purchase this mouse trap here: amzn.to/3sinV4v Do You Have A Mouse Problem? I invented The World's Greatest Mouse Trap - The Dizzy Dunker Purchase on Amazon: amzn.to/3Py9eDF Purchase Directly from the Rinne Website: www.rinnecorp.com/?ref=shawnwoods1 (As an Amazon Associate I earn from qualifying purchases.) FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post. For A List Of My Top Mouse Traps Recommendations Check Out My Online Affiliate Store: www.amazon.com/shop/historichunter (As an Amazon Associate I earn from qualifying purchases.).

I like how pet mouses already accepted their fate and demostrated the trap without second thought

That house cougar at the end is amazing.

I remember a time when Shawn was catching 10 mice at a time. Is he actually running out of mice to catch?!

Your neighborhood domestic cat! Oh my. Laughed at one of your pet mice looking right at the camera! Like oh, Shawn's using us to demonstrate again.

Lol always nice seeing cats being opportunistic

The early bird gets the worm... But, the LAZY cat grabs BOTH mice...

The thirteen most terrifying words in the English language are, "Now, what we caught are a non-native invasive species called a house mouse."

Fine product in theory, but the metal lid is probably heavier than the plastic versions or the paper plate, so inertia probably gives more warning in this case. I'll stick with the Flip N Slide he tested awhile back, a trap that is absolutely boring because ALL it does is catch mice: NONE escape once they climb to the lid. It is one I bought specifically for that rarest of attributes: "Made in the USA".

It looks like the metallic clang of the trap resetting scared the others away. I wonder if you'd have more luck if you put a felt furniture pad under it so it doesn't clang when it resets?

Oiling or waxing the “lid” may also help with higher catch rate as well as help keep it from debris

I wonder if adding a small magnet would improve this trap, either on top of the tipping part or underneath the stationary part.

Just found some mice in my backyard hiding in my rosemary plants. I’ll give this a go.

I see Shawn, I click

Cat looked at the camera like "This can't be this easy....Ok, DEUCES"

Rip house mouses ☠️🙏🏻

Interesting! I haven't seen that siamese cat before!

That is a good trap. Thanks Shawn. I love the end when you video the animals that come to get the mice you catch. 👍

Seems like you could invent something similar by using the plastic lids that come with 5-gallon buckets. Kind of a hybrid between your paper plate and this. Also, the possibility of using a small magnet to allow the mouse to walk the lid to a point and then dump seems like it would improve this design. Thanks for sharing.

Somebody’s residence got a house mouse surprise

It.seems to work pretty well 👍

Thanks for sharing your reviews and keep them coming please.

Hi, your enthusiasm is infectious keep up the good work, Shawn!

Kitty needed a easy catch

The cat picking up the kill looks both ways as in disbelief that the catch was that easy.

Possibly adding a tiny amount of silicone to the back edge of this, just enough to give it a tiny amount of lip grip before popping a sudden flip would help… maybe

Cat: "I am Siamese, if you please..."

I would like to see Shawn Woods' full pet mouse collection and cages. Anyone else?

Who else is watching shawn on their monday off?👨🏾‍🔧

Awesome thanks great work

So are you gluing down the bait to prevent it from falling with the mice? Maybe using peanut butter as “glue”?

I don't like that you must take the whole bucket lid and ladder to dispose of the contents, seems a bit cumbersome to me. Thank you for another super informative video Shawn xx Jean from Scotland.

Yes, sweet piano at the end of the video is quite relaxing

Nice to see a cat get the snack for a change! 😸

On these various bucket traps, I would fasten clothes pins All Along The Edge so that the mouse or rat doesn't walk around on the edge and eat the bait.

I'll have to put getting one of those, on my "bucket list"...

will it work for rats?

The issue with this design is the mass of the moving plate. Lighter is better, particularly when the movement is generated by the weight of a mouse.

Since it's metal, what if you sprayed the top with a light grease or some other similar substance to make it a lot slippier.

Pet mouse #1 is turning into a ham, mugging for the camera. I guess the mice are not SAG/AFTRA members, unless this video was recorded before the strike

This one would keep the rats from jumping out like the other bucket dunk traps. Looks like a solid build.

I wonder how this would do next to a RinneTraps Flip N Slide. I love my Flip N Slide not from Amazon.

It needs a little refrigerator magnet to keep it closed steadily until there's enough force to pop open.

You take them out and after they come back 😂😂

Shawn's barn does not have as many mice as it used to. Need another shipment!

Definitely better then the original rinne trap, it works but the plastic is to flimsy and it got warped during this summer. ( not in sun light) maybe 87 degrees max. I just tossed it today. I’ll give this one a try.

I'd like to see it seal properly so it works as a bin lid, too.

We haven't been to the dam in awhile

add 6 inches WATER as the last thing you want is INTELLIGENT MICE who will not go near a trap after they were let out

Do you think this would work with rats? Especially with about 10 or 12 in of water in the bucket?

Love your videos! Saw a new commercial for "Rodent Away" Have you tried this yet? If not I suspect it could be interesting. There's a 6 month money back trial too!

Hi,Thank you for your videos does this work on ground moles? Teresa

As always Shawn, gloves Shawn, gloves. Protect yourself and your family.b

I like the video and music again at the end

Greetings from southern Ontario Canada I really enjoyed the video

With the solid design on the not trap side could this lid keep rats from escaping?

My mousetrap Monday purple sweatshirt came today. Ready for fall. Lol

Seems to need a little work on the tipping point, the clampy things are at two different angle, maybe they need to be uniform to help with the tip.

Shawn, is is more correct to say that this is a manufactured trap. There is nothing pre-manufactured about this trap.

The only reason I would prefer this over a homemade is just the audible clang so you know something got caught. I suppose one could attach a bell to a homemade one.

I like a story with a happy ending.

The skunk, wanting to reduce his carbon emissions, is trying to work out where Shawn releases the native mice😂

❤ This was good ,wish you listed the best in the notes, comment. Something about a hunt , trapping is exciting to me . I have something eating bugs under an outside light that leaving poop . It’s not settling off the blink camera so it’s a mystery. 😊😊😮

This seems to work well, but, seems like a lot of extra work. You have to start with drills to attach the ramp. I don't remember any of your other recommended traps required to do that. I can't see myself buying this one. Just speaking for myself, though, as I don't have experience with drills and such.

Little rubber bumper would be good so it resets it don't clunk.

I've been contemplating it for a few weeks.

You should try modifying this trap with a magnet to make it stay more firm until they are too far out on it.

Cat got em

I hope you will see this. I love your videos and I don't know why I hate house mice. Have them at my old j lob

Have you ever tagged your released deer mice to see if they come back to your barn?

Where do I find this particular lid

Good work Crawdaddy.

What did you use for baits?

I've had great luck making traps based on your videos. I love your information, your humanity, and the quality of your content. I'm going to get your trap just to show support, even though I've had awesome success already thanks to you.

However, I do appreciate the work. So, Thank You for this, and for all the work you do.

If nothing else, the Boise will alert you to captured mice. Clang. Clang.

Made in China. The other one you recommend, rinnetraps flip in slide, is usa made and has worked flawless for me.

That mouse ended up a gift to the cat owner(neighbour)

Neither the Amazon link nor the manufacturer link take us to this lid anymore. They go to different lids.

Hope everyone has a very Happy, Healthy Holiday weekend!

Excellent

if you burry it would it work on moles?

I find it odd this comes with a drill bit since who has a drill but no drill bits?🤔

Shawn, why steel? It rusts after rain and moisture overnights? Is it thermal electric coated treated paint? If not, paint will flake off and RUST!!! Still waiting for a reliable mouse trap!

What would happen if a light coating of vegetable oil was placed on the top of the trap? I'm guessing that the mice would slide to the tipping point quicker.

Where is the paper plate video? What did I miss?

Mouse No 3 clearly has some Matrix vibes going on.

Ballincat43!!

Blessings shawn

Love it

It looked too heavy and slow to tip so I'm not surprised a lot of mice escaped falling in.

funny how you get to decide who lives and who not.

Those pet mice have been trained (jk).

Your mice simply know the drill :D

Where is the "house mouse" natural ecosystem? Could you take them back there? Inquiring minds want to know.

How do you "despatch them humanely?"

I didnt realise cats ate carrion.

what a pretty kitty

second night he caught the same two mice he caught the night before

Thanks god bless