SHIMANO NEXAVE 2500HGFI - Take Apart & Reel Maintenance TUTORIAL

Рет қаралды 7,220

Жыл бұрын

In this video I teach Jaime how to take apart and service her Shimano Nexave 2500HGFI Spinning Reel. Step by step we take apart and clean this fishing reel and then put it all back together, so follow along and hopefully this helps you with yours! If you have any questions feel free to hit us up in the comments! Thanks for watching!
You can follow us on Instagram!
/ wherewewild
SHIMANO NEXAVE 2500HG PARTS & SCHEMATIC:
fishshop.shimano.com/collecti...
Shimano Nexave 2500HG:
amzn.to/3TAlT7L
Penn Reel Grease:
amzn.to/3X9mQa7
Lucas Reel Oil:
amzn.to/3OdCzkG
Screwdriver Kit:
amzn.to/3EziYYF
Wrench Set (12 mm size was used):
amzn.to/3g6txt5
Paint Brush Set:
amzn.to/3V2rHbx
Camera Gear used in this video:
GoPro HERO8 Black: amzn.to/3wJtPdm
SanDisk 256GB Extreme Memory Card: amzn.to/3L5lztD
Portable Charger Power Bank: amzn.to/3Qlgm71
GoPro Shorty Mini Extension Pole Tripod: amzn.to/3cclMfi
Neewer Ring Light: amzn.to/3yvV5i4
Disclaimer: This description contains Amazon affiliate links. Which means if you decide to make a purchase after clicking a link, we may receive a small commission at no additional cost to you. Thanks so much for your support!

Пікірлер: 34

@Szuubs 7 күн бұрын

After dropping my reel while wading through a muddy river, my reel was running really rough. Now after following this video, everything is running nice and smooth - feels brand new. Appreciate the in-depth instructions, thank you!

@WhereWeWild 7 күн бұрын

@@Szuubs Sweet! Happy the video helped ya out! 👊🏽😃🎣🤙🏽

@johnshepherd5673 10 ай бұрын

Your reel maintenance vids are the best I have seen. So helpful. Ty. 👌

@WhereWeWild 10 ай бұрын

Thanks man! 👊🏽😃 That’s really nice of you to say and awesome to hear! I’m glad they are helpful to you! Haha never really know if people are enjoying them. 🤷🏻‍♂️😂 But they are honestly some of my favorite videos to make because I can kind of just relax and just enjoy working on the reels. 🎣😎🤙🏽 Thanks again for the nice comment and thanks for watching 👊🏽☺️

@adt83live Жыл бұрын

Awesome, I appreciate you making this video 👍

@WhereWeWild Жыл бұрын

No prob man thanks for watching, hope it helped ya out 👊🏽😊

@gussfish8670 Жыл бұрын

After prolonged use especially around salt water it's a good idea to pull out the nose bearing and line roller bearing to clean and lube they take a real beating.

@WhereWeWild Жыл бұрын

Salt water is the worst. Gotta spay those reels down with a hose after ever trip.

@abrahammazat9554 11 ай бұрын

How often should I do this? (Obviously depends on usage) but what would you recommend for mid usage? Super helpful video btw. Thanks!

@WhereWeWild 11 ай бұрын

Thanks man 👊🏽😊 Glad you enjoyed it! Definitely depends on usage ya know, and also on how you like your gear to be lol I know guys who never do it at all 🤷🏻‍♂️😂 But normal usage, not dropping it in the sand or noticing it getting super dirty or feeling rough, I’d say once or twice a year. 😊🤙🏽

@fkhfvgfjbdv6198 Жыл бұрын

I just bought some spider wire do you think I need to put a leader because I don’t know if the fish see it it’s like the green one it’s like what you have in the video

@WhereWeWild Жыл бұрын

Absolutely. Around here always use a clear leader! 😁🤙🏽

@fkhfvgfjbdv6198 Жыл бұрын

cool cool cool

@TheOrdep1976 2 ай бұрын

@WhereWeWild 2 ай бұрын

Yw 😊🤙🏽

@yozanarianto5789 10 ай бұрын

Can i buy pinion gear and oscillating gear for reel shimano nexave C3000HG?

@WhereWeWild 10 ай бұрын

Definitely here’s the link to the parts from Shimano or can try eBay… 🤙🏽 fishshop.shimano.com/collections/nexc3000hgfi

@revincortez5886 Жыл бұрын

i did the same thing but my reel feels rough when cranking, like the main gear is touching something

@WhereWeWild Жыл бұрын

I would just take it back apart and make sure everything is in the right place. Main gear is pushed all the way in, the piñon gear is all the way seated and meets the main gear correctly, check the bearings, make sure oscillating gear is seated in the slide, everything man. As well as check the teeth on the piñon and main gear to make sure they aren’t damaged.

@revincortez5886 Жыл бұрын

@@WhereWeWild thank you so much

@revincortez5886 Жыл бұрын

@@WhereWeWild d yu have instagram i would like to take a picture of my reel issue

@WhereWeWild Жыл бұрын

@@revincortez5886 Yeah of course the link is in the video description it’s just Insta: WhereWeWild

@gussfish8670 Жыл бұрын

First thing loosen the handle knob a little and see if the binding let's up if it does the the handle shaft that splines into the reel through the main gear might need another thin shim washer or two in order to space the handle away from the side plate we're talking a very close clearance next be sure your washer shims are back on your main gear and on the correct side also any shim washer or washers between the rotor and nose bearing beyond that after the side plate is back on tap on it with a non metallic mallet or even the rubber part of a screw driver handle using light to moderate striking force this will sometimes seat the side plate bearing in place and eliminate binding, also make sure if you have instant anti reverse that it is clean sometimes with prolonged use especially in salt water the anti reverse unit can start to bind taking them off the reel and cleaning them in clear mineral spirits can help just let it dry completely before reinstalling.

@AdrianMtz222 Жыл бұрын

So I did this and my reel spins both ways now… what did I do wrong

@WhereWeWild Жыл бұрын

Well I can’t know for sure what’s wrong, haha but that pretty much means your anti reverse isn’t working. There is a link in the video description for the schematic. I would take it all apart again and put it back together following the schematic and making sure every part is in the correct place and not damaged. Pain in the butt I know, but that’s the only way to figure it out. 🤷🏻‍♂️

@AdrianMtz222 Жыл бұрын

@@WhereWeWildthanks it’s weird be cause there is no switch on the reel either lol

@WhereWeWild Жыл бұрын

@@AdrianMtz222 Yeah I know hahaha I actually went over to look at the reel when I first saw your comment lol couldn’t remember if it had the switch 🤔😂 Was hoping that was the easy fix for ya but yeah they’ve kind of stopped making them that way. Something just has to be slightly out of place man. Those little metal pieces inside the black cap maybe if you messed with that little 4th screw, or something not seated or lined up with the gears. You’ll find it. 👊🏽😎

@unclepauly3205 11 ай бұрын

@@WhereWeWildI put mine back together and have the same issue. I believe you missed a step in the video.

@AdrianMtz222 11 ай бұрын

@@unclepauly3205 man i threw that shit away ngl i had enough of it haha good reel tho

@tamvan2840 10 ай бұрын

Video is too long

@WhereWeWild 10 ай бұрын

Lol ya think? 😃😂 Take one of these completely apart, clean every little thing on it, then put it all back together and see how long that takes you bro. 😁 And even worse teaching your wife how to do it while you’re at it! 🤦🏻‍♂️😂 That’s what fast forward buttons are for. 😁🤙🏽