Shop Storage Cabinets - Doors, Drawers and Installation

Shop Storage Cabinets - Doors, Drawers and Installation - Part Two

Рет қаралды 30,249

5 жыл бұрын

I finally decided to change out some old big box store cabinets I have had for a while. I make the drawers, make the doors and install everything!
All the Rockler.com products used in this video:
Adjustable Shelf Pin Jig - www.rockler.com/jig-itreg-she...
Concealed Hinge Drilling Jig - www.rockler.com/jig-it-deluxe...
Drawer Pull Jig/Template - www.rockler.com/drawer-pull-j...
I purchased all my hardware here - Custom Service Hardware - cshardware.com
Help support my channel and what I do, buy a shirt!
www.guyswoodshop.com/gear.html
As always, I welcome your questions and comments!
To keep up with what I've got going on daily in the shop, follow me on Instagram - @guyswoodshop

Пікірлер: 103

@mkhenebuli7903 3 жыл бұрын

The skill here speaks volumes

@GuysShop 3 жыл бұрын

Thanks so much!

@stevewalker7822 5 жыл бұрын

Nice job! there's nothing like having an organized shop.

@brettmasek9453 5 жыл бұрын

You are one of my favorite wood workers to watch here. I aspire to be half the craftsman you are. Practice and patience I believe. Love your videos and love those cabinets!

@GuysShop 5 жыл бұрын

Thanks so much Brett!

@danlynch1154 5 жыл бұрын

As always a wonderful project, done with real precision and skill. Thank you.

@GuysShop 5 жыл бұрын

And making sure to keep the camera far away from the finished project :) Thanks!

@hawkeye10100 5 жыл бұрын

I enjoyed both of these videos on cabinets. They look really great.

@GuysShop 5 жыл бұрын

Thanks Don!

@mattbellomo6066 5 жыл бұрын

Such a great idea for installing the drawer fronts. Thanks to you and Marc :)

@GuysShop 5 жыл бұрын

Yeah, it was one of those moments when I saw him do it.

@wb_finewoodworking 5 жыл бұрын

The cabinets look great. Thanks for all the helpful information.

@GuysShop 5 жыл бұрын

Thanks for watching!

@avih7311 4 жыл бұрын

Looks better than my kitchen! Really nice -Enjoy!

@StuffUCanMake 5 жыл бұрын

Cool video! May you have a Happy & Prosperous New Year.

@dalewilliamson1125 5 жыл бұрын

WOW Guy, those cabinets look Awesome!! Thanks for sharing some handy tips also.

@GuysShop 5 жыл бұрын

Thanks so much for watching and the nice comment Dale!

@brucemartin5510 5 жыл бұрын

Great work. Glad/hope your're back!

@GuysShop 5 жыл бұрын

Thanks! I'm not going anywhere!

@stevecollins9450 5 жыл бұрын

Those look fantastic, Guy.

@GuysShop 5 жыл бұрын

Thanks as always Steve!

@cruelgirl3421 5 жыл бұрын

Amazing as always !

@GuysShop 5 жыл бұрын

Thanks as always!

@fixitwithzim 5 жыл бұрын

Great looking cabinets, thanks for sharing

@GuysShop 5 жыл бұрын

Thanks!

@Simplecove 5 жыл бұрын

Beautiful cabinets! I also used Marc's trick on my recent CNC cabinet lol. Super handy.

@GuysShop 5 жыл бұрын

Thanks Sean! It really is a good method.

@codykniffen 5 жыл бұрын

😂 I had the same reaction when I saw Marc do that with the drawer fronts too. Quite the "Why didn't I think of that?" moment. Looking good, Guy!

@GuysShop 5 жыл бұрын

Yeah, I just kinda smacked myself in the head....

@CAMEO1955 3 жыл бұрын

I'm getting ready to start my tool cabinet's , Thanks for the tips in this video & your skilled work ! you stay safe . T / C

@GuysShop 3 жыл бұрын

Thanks, you too!

@matthewbyington2418 5 жыл бұрын

Awesome as always Guy!!

@GuysShop 5 жыл бұрын

Thanks Matthew!

@malbrandow7382 5 жыл бұрын

Shop's lookin' great Guy!

@GuysShop 5 жыл бұрын

Thanks so much Mal!

@HiramWoodworking 5 жыл бұрын

I like the little “toot toot” at the end...”...and of course they look great!”

@FredMcIntyre 5 жыл бұрын

Awesome work Guy! 😃👍🏻👊🏻

@GuysShop 5 жыл бұрын

Thanks for watching Fred!

@NASTYcraftX 5 жыл бұрын

Your shop cabinets turn out great

@GuysShop 5 жыл бұрын

Thanks Nick!

@IEnjoyCreatingVideos 5 жыл бұрын

Great looking cabinets Guy! Thanks for sharing the video with us.👍😎JP

@GuysShop 5 жыл бұрын

Thanks as always for watching JP!

@IEnjoyCreatingVideos 5 жыл бұрын

Your very welcome Guy! 😎

@davecurda2350 5 жыл бұрын

Wow Guy those look great nice work

@GuysShop 5 жыл бұрын

Thanks so much Dave!

@dsdragoon 5 жыл бұрын

Your cabinets look great!

@GuysShop 5 жыл бұрын

Thanks! I'm really happy with them, and so is my wife. Which is super important!

@dsdragoon 5 жыл бұрын

@@GuysShop Happy wife, happy life.

@chemcody5119 5 жыл бұрын

They came out great! Almost too pretty for a shop! 😀

@GuysShop 5 жыл бұрын

Thanks Chem!

@giovannipetitti1588 5 жыл бұрын

👍👏👏👏👏 Happy New year

@GuysShop 5 жыл бұрын

Happy New Year!!!

@hassanal-mosawi6049 5 жыл бұрын

Thanks for sharing that

@GuysShop 5 жыл бұрын

Thanks for watching!

@LouAdzima 5 жыл бұрын

Great work Guy. I like the vacuum clamp for the Dominos.

@GuysShop 5 жыл бұрын

Thanks Lou! I use the heck out of the vac clamps in my shop. Very useful tool for production work.

@alans1816 5 жыл бұрын

The vacuum clamp looks useful, but in this case, why not just put the part flat on the bench and use the domino vertically?

@GuysShop 5 жыл бұрын

@@alans1816 Just the way I like to do it. I find the domino machine itself easier to handle in a horizontal orientation

@amina.hamadoudouida8450 5 жыл бұрын

God job

@GuysShop 5 жыл бұрын

Thanks so much!

@p8ntblr1 5 жыл бұрын

Do you have a link to screws used for drawer slides? Do they align the slides? No play between screws and slots on slides?

@DuncanRenovates 4 жыл бұрын

I'm preparing to build cabinets very similar to these. Do you have any concerns that the door panels may warp over time? Or do you have stabilizing "bars" on the inside to prevent that?

@Woodcraftedworkshop 5 жыл бұрын

The cabinets look great Guy! Whats next?

@GuysShop 5 жыл бұрын

Thanks Brian! I have a few ideas. And they are definitely not what my wife wants me to work on next....

@simonh73 5 жыл бұрын

What made you choose the rail dogs and MFT table over using the TSO GRS16's you have hung up on the wall?

@GuysShop 5 жыл бұрын

Just an alternate way of doing the operation.

@jimnachman3640 5 жыл бұрын

These look great. I like the process you followed to lay out the drawer fronts. Where did you get the tool to mark in three inches for the hinges at 11:29.

@GuysShop 5 жыл бұрын

thanks! That is the Incra 6" T Rule

@user-ji7vr8gj4x 5 жыл бұрын

Thanks for another great video series! What is the pedal you use for your vacuum release? Or where could I get one? I've been looking for an inexpensive one and haven't found one yet.

@GuysShop 5 жыл бұрын

Thanks for watching Patrick! I got this one from VacuPress. Can't remember the price, and I would like to say it's inexpensive, however nothing comes cheap nowadays.

@stjepanrasic8571 5 жыл бұрын

When you spray the finish do you also spray the non visible areas such as the cabinet bottoms and back? Or leave them unfinished? I'm wondering if it's necessary to help protect the wood? Thanks

@GuysShop 5 жыл бұрын

Nope. The cabinets got sprayed on the inside only, except for one side of the tall cabinet and upper cabinet that was exposed. The drawer fronts and tops of the shelves also received finish.

@danmcdan8278 5 жыл бұрын

Guy, beautiful work, as always. Delivered in a nice style with no cussing - there's always a little bit of cussing in my shop! I am curious why you left the inch or so gap between the bottom of the cabinet and the bottom drawer? I usually keep the bottom drawers about an 1/8" from the base. Is there a reason beyond personal preference? Thanks for your videos - I always find them inspirational.

@GuysShop 5 жыл бұрын

Thanks, and trust me, there is always a few curse words here and there. Just not on camera :) The reason that happened is I got ahead of myself when I put the drawer slides in. If I would have set the drawers that close to the bottom, by the time I got to the top, that slide would have not hit the drawer side. I figured it was easier just to lose a little depth then to re-drill for the slides.

@ElliottStephens 5 жыл бұрын

On your other built-ins, it looked like you were using an adhesive backed edge banding and roller that didn't require an iron - is there any particular reason you're back to the iron on variety here?

@GuysShop 5 жыл бұрын

Hey Elliott. I did use some of the Fastcap stick on banding, and it really worked great. No issues at all with it. However, it is really expensive, and I just used the iron on variety here. Takes a little longer, but still works well and has never failed me.

@ElliottStephens 5 жыл бұрын

@@GuysShop Great, thanks for the quick reply and videos - really enjoy them.

@billystray7007 5 жыл бұрын

I'd rather use iron on ,the stick on is just so gooey , I spend more time cleaning up the mess it leaves behind than I do ironing it on Also I find the line it leaves behind to be kinda thick by comparison..

@reforzar 5 жыл бұрын

Killer!

@GuysShop 5 жыл бұрын

Very killer!

@FranksDIY 5 жыл бұрын

Amazing job. Unfortunately I rushed mine and used materials that I was not used to using but over all it's functional and a work in progress. 👍❤

@GuysShop 5 жыл бұрын

Thanks! As long as they're functional and do what you need them to, it's a win!

@rogerbarr2365 2 жыл бұрын

At approximately 700 on the video you set the bottom drawer in the tall cabinet. It appears you just set the drawer on the bottom of the cabinet. After fastening the drawer slide to the drawer to the drawer, it appears you have a much larger space between the bottom of the drawer and the bottom of the cabinet. Also, do you have the plans for this cabinet system? Thanks. Roger

@denchwoodwerks 5 жыл бұрын

Guy, I always see people checking for square on their cabinets and drawers but never see them adjusting them when they are off a little bit. If they don’t come out perfect as shown in the videos what is the procedure to square them up? Thanks

@GuysShop 5 жыл бұрын

Hey Tom. That's a good question. The first answer is to not build them out of square :) (Sorry for the snark!) If they are not square, it's easy enough to cut them to fit the opening by cutting the panels out of square. There are multiple instances of this shown in some of my other videos. One that immediately comes to mind is my chisel cabinet build where I show how to use shims on the table saw sled to shave a little off here and there to make the door fit correctly.

@denchwoodwerks 5 жыл бұрын

GuysWoodshop thanks Guy.

@Kapt6911 5 жыл бұрын

are your drawers 3/4? What size domino did you use?

@GuysShop 5 жыл бұрын

The drawers are 1/2" and I used 4 mm Dominos

@markk4015 3 жыл бұрын

Hey Guy. On this video you used a shop made jig to drill the cabinet side for the hinge plate screws. On another of your videos, which I can't find, you used a Rockler Jig-It to do the same thing. From what I can see, the Jig-it seems pretty useless, because the measurement to the screw holes is based on the door thickness plus 38.5MM(at least it is for Blum). Did you have any issues with the Jig-It?

@GuysShop 3 жыл бұрын

It wasn'tthe correct set back (37mm?) forthe hinge plates

@markk4015 3 жыл бұрын

@@GuysShop According to what I read on the Blum website, you add the thickness of your door, they call it "T", to 38.5mm to get the correct setback of the screw holes for inset doors. So if you had a 3/4" door(about 19mm), you would add that to 38.5. Therefore the setback should be 57.5mm. Funny, there were a couple of reviews on Amazon that pointed this discrepancy out, but now they're gone. The proof is in the pudding though, if they worked for you, I believe it. I just don't understand why. I'm in the process of trying how to figure out how to send the schematic to you.

@arthursears8295 3 жыл бұрын

Where can I get the plans?

@GuysShop 3 жыл бұрын

Sorry, no plans available

@thepoplarshop 5 жыл бұрын

👍👍 I give you two weeks and the empty cabinets are filled. 🤠

@GuysShop 5 жыл бұрын

It took me a minute to fill up the drawers, and my wife filled everything else up on her next day off....

@kuffyswoodwork 5 жыл бұрын

Thanks for highlighting the worst part of changing cabinetry. Taking all of the crap out of the original cabinets and dumping it somewhere....hopefully temporarily 😂

@GuysShop 5 жыл бұрын

HaHa. Yeah, with limited space in the shop, I always have to think about how I'm going to replace stuff with more stuff and what to do with the stuff when I'm working on stuff.