I clicked on the link for the Keen-Products and it is a DEAD END, apparently they no longer exist.
@_Manuwar_3 күн бұрын
muy buen video tomare ideas para mi ender 5 plus,saludos desde Alboraya,valencia ( españa) ;)
@ronhoogenakker63463 күн бұрын
When I purchased mine several years ago it was cheaper to buy a machine with knives & replace the head with a BIRD head. Great machine.
@ronhoogenakker63463 күн бұрын
So this is what my machine looked like when it was new.
@JJ_Assalt3 күн бұрын
the door mod is perfect, if the door is made poly, i'll dont care, bur one evil eye and this shit broken.
@fathooo4 күн бұрын
thanks, amazing
@Neuromorphic_Replicant6 күн бұрын
Hi, I tried to download the palns and sketchup files but I get a message from google that I need permission. I filled out googles form but I never got an email okaying my access. What do I do to get the plans?? I have all of the Incra parts and I'm ready to go. Thanks in advance.
@AndreaMerchak7 күн бұрын
Beautiful! ❤
@GuysShop6 күн бұрын
Thank you! Cheers!
@garrydye23947 күн бұрын
Any changes to this bandsaw in the last decade?
@jorgemorales25111 күн бұрын
Hello, how are you? I wanted to ask you about a problem I have in my Core xy what happens to me is that when I move the axis and the x axis also moves you have an idea what it can be!? In the programming, is there a problem!? The straps and pulleys are new and are very tight!
@alessandrostilo497312 күн бұрын
Beautiful work, you could have the mesauremant?
@otaviolemospersonal641815 күн бұрын
Amazing 👏🏽👏🏽👏🏽👏🏽👏🏽
@MorSorFor9918 күн бұрын
Insane demon music
@zetabola119 күн бұрын
Hi, the printer comes with power loss recovery?
@saddle194020 күн бұрын
I still cannot feed the filament into my K1C easily and am tempted to feed it through the roof in a vertical loop like the old Flashforge Finders used to. The filament goes through a sharp turn just before the extruder and I'm having to push it hard to get it loading. Maybe make a large tall plastic cover for it. If it gets to that stage, I'd also move the filament sensor to the side front to make loading easy while facing it.
@jimbo_mode20 күн бұрын
finally ive accidentally found the way to access the built in klipper on my v3 after stumbling upon this video. finding info about this printer is like pulling teeth sometimes... I have a bone to pick with whoever is in charge of creality's naming scheme.
@1fattyfatman20 күн бұрын
On her back.
@mhh919922 күн бұрын
Hi, nice video! I’m looking to do some of the mods to my new k1c and wondering where you got the screws, nuts and washers? My local big box stores don’t have metric. Did you happen to purchase an assortment pack from Amazon of these mods? Tia!
@copelandingadventures24 күн бұрын
Nice
@copelandingadventures24 күн бұрын
Nice
@anthonyz.456025 күн бұрын
Does the runout sensor side mount use the original screws from when it was mounted on the back?
@speedmasteriv14 күн бұрын
With his mount you need to use 2 nuts for the top part. I found another design that does not require the nuts.
@anthonyz.45603 күн бұрын
@@speedmasteriv1 do you mind sharing the link to that one?
@Strudellable25 күн бұрын
Hello! Could you please show your setup for the space pi filament dryer together with this print? You are side loading it straight from the dryer to the runnout sensor right?
@bleedmoor28 күн бұрын
help!! My longer just stops after framing / patrolling. It did one perfect engraving and now this. its brand new!
@FS-Astro28 күн бұрын
Can you print multiple things at once and what is the program name
@petermarkk140828 күн бұрын
It is so much better if you root it and using orcaslicer…..it is a different machine.
@awesomusmaximus376629 күн бұрын
I didn't need to mod mine but I will I'll wait till the warranty runs out first
@roofermarc1Ай бұрын
Did you have the DC on when you first ran the dado?
@djantix1200Ай бұрын
Like you said. DO NOT UPDATE THE KLIPPER Firmware!!!!!!! It will brick it. You have been warned!
@Paul-mx2yjАй бұрын
Mine is being delivered this week. Would you please tell me the exact size of the base. I have the bolt pattern but the manual does not have overall dimensions. Making a base before it gets here. Thank you
@josephKEOarthurАй бұрын
Nice.. using this as a makeshift router. For the shelving… !
@GuysShopАй бұрын
Great idea!
@craydimpel9289Ай бұрын
Micro swiss makes a replacement hotend with some good nozzles. 🔥
@chrisl.9509Ай бұрын
I finally swapped from resin printing and got a k1 on sale. Its been great out of the box. Just wish I had the space for the k1 max but i didnt want to get rid of my uniformation resin printer.
@ThatsPetyАй бұрын
How did you like the uniformatiom? Was thinking about getting one
@chrisl.9509Ай бұрын
@ThatsPety it's a great resin printer that was up and printing in less than 20 minutes. The few print fails have been my fault due to bad support placement. Just don't bother with their wash and cure station. Anycubic's is better and cheaper. Beware the amount of space it all takes up though.
@brunohenrique1885Ай бұрын
Please share the stl for the spool holder, I cant find it :(
@TheCalaudioАй бұрын
I speak Spanish so I didn't understand everything haha, but what material is everything printed on and number 2... would that work with the K1? Or do they have different measurements?
@GiovaSanta12Ай бұрын
For a total beginner do you reccommend Ender 3 V3 KE, Creality K1C or Qidi Q1 pro? I think to go on K1C or Q1 pro only for having the possibility of print hard material like ABS or ASA but if are equal I don't want to wast money. I want also the best print quality without artifactas. Help me. Thank you
@GuysShopАй бұрын
I really like the K1C
@micver1091Ай бұрын
kzfaq.infoUtf2KXZfbpI?si=0ETKb1R9lGHokffT
@henrybialik8333Ай бұрын
Was curious why didn't you use stop blocks on the router table when you were drilling the mortise. Wouldn't this be more accurate when doing multiple mortises.
@30dimosАй бұрын
is it worth buying the enter 5, I found it quite cheap, it needs a search in Greece, there are good used ones, it's worth getting the model, is this upgrade you made the motherboards for making our own printer? for height width
@30dimosАй бұрын
I have also found the ender 3 v3 KE 150 euro, is it worth buying? if I can get it And I found the ender 5 with extra µmicrowiss investment some noizle Here it has prices 300 400 In the shops .. For used I found it 150 euro I am thinking of getting both they are good bargain prices because they are not easy to find with little money I find a few pieces here
@wowzers0_070Ай бұрын
I've been saying I'm going to get a 3D printer for years and years. Sigh... Great video!
@GuysShopАй бұрын
Go for it!
@user-ql4mp9ov6mАй бұрын
I watched your video and went and bought one, it's so friendly for us girls, very easy to use and I've printed so many great-looking models so far. Thank you so much!
@GuysShopАй бұрын
Wonderful!
@MrRahluv357Ай бұрын
Can you use this on a saw stop jobsite saw?
@WilliamHowardTaft27Ай бұрын
How would i connect the ptfe tube from the dryer to the filament sensor?
@grovesvilleАй бұрын
Great teaching video Guy
@GuysShopАй бұрын
Glad you liked it!
@josephKEOarthurАй бұрын
So there are six casters on the workbench/table? or is there a seventh in the Middle, im not seeing?
@GuysShopАй бұрын
Just the six in the outside of the case. Still works great after all this time!
@RubenCalleja-kl8eoАй бұрын
i need to buy these files to print them?
@GuysShopАй бұрын
Nope. They are all free at the links in the description
@jennessalynam7682Ай бұрын
Can you reuse the "rubber" (rag) on another project much later on, even after the shellac has dried into it?
@GuysShopАй бұрын
Absolutely! Just wet it again with some alcohol and then recharge with shellac.
@jennessalynam7682Ай бұрын
@@GuysShop That's what I figured, so I did and it worked out great. Thanks.
@jurgenclaeys3366Ай бұрын
Which slicer do you use for this printer?
@GuysShopАй бұрын
Orca SLicer and Creality Print
@jurgenclaeys3366Ай бұрын
@@GuysShop can not find my printer in them. I live in Europe is that a problem perhaps?
@jurgenclaeys3366Ай бұрын
@@GuysShop I can not find my cr 10 se in any of them. What am I doing wrong?
@1r3k1970Ай бұрын
It's very sad that it has to be corrected after the factory. The printer doesn't cost $1. Should I pay $600 and print the parts at home?? I wonder if it will be the same with K2. We'll do shit and you can fix it at home. Give us your money and fuck off.
@GuysShopАй бұрын
Buying a Creality printer and doing some quality of life mods are kinda baked into the cake.
@1r3k1970Ай бұрын
Why doesn't Creality do it? After all, it's a piece of cake for them....
@robertsheldrick4267Ай бұрын
Logical upgrades or mods.
@GuysShopАй бұрын
Thanks!
@coincollector3152 ай бұрын
you have the protractor backwards on the fence of the protractor. It is meant to sit on that level top ridge.