Die hard SnapOn maximalist here with 15 years of shop experience... I sold all of my SnapOn cordless stuff and went with Milwaukee. I have zero regrets. Harder hitting, cheaper and just all around better tools imo. Hate me if you want too lol
@RyanFixesCars3 жыл бұрын
@@ZeGermanHam well then, I hate myself LMAO
@Shoptoolreviews3 жыл бұрын
Snap-On should really take note of all their users leaving their power-tool platform. Thanks for watching and commenting.
@Macdad2603 жыл бұрын
@@ZeGermanHam They're building their credit at 29% interest. LOL
@mattperry48683 жыл бұрын
Same here, in the industry 14 years. Sold all of my snap on 18v and 14.4v tools and bought all milwaukee. Love them all!
@84shortbed3 жыл бұрын
Same her man, no regrets. Still going strong
@doubled82473 жыл бұрын
What’s nuts is you’re able to buy a compact, mid torque and full torque and 2 batteries for almost the same price as a single snap on.
@rich80373 жыл бұрын
@Nathan The Snap On hand tools last for decades of rough use, so I'm not surprised to read that. Also that Snap On guarantee costs, but it's worth having.
@doubled82473 жыл бұрын
@Nathan the sad part is what you describe happened to me with my ct761, my ct8550 and my Cdr761. My ct8550 lost power, my ct761 locked up and smoked and my cdr761 smoked out drilling a 1/4 hole in aluminum. Sent them all in as they smoked out. Traded them all in on hand tools and bought me a m12 set and m18 set. Had the snap on for a little over a year. I am now on my fourth with my Milwaukee stuff. Only issues I’ve had was I broke the pin on the ratchet, and the clutch because loose on my m12 drill after drilling 20 -4 1/4” holes on 1/2 aluminum tank sills. Since I’ve had the $20 dollar warranty on them at Home Depot I walked in with my old ones and walked out with new ones in less than 30 minutes. I wouldn’t buy snap on again I had $1,600 worth of batteries and tools and they left me having more than once 😂
@kennyschopperz3 жыл бұрын
The Ridgid from home Depot is a bad ass gun too, super strong, but the over amped motor won't last. But guess what? Ridgid will replace it, free. And pay for shipping. But I will stick to my snappy stuff, and not have to send it back, by the industry average failure time.
@jacobmorgan35293 жыл бұрын
@Nathan must have gotten a shitty build then. I have just about every tool they make. My 3/8 and 1/2 I’ve had for about a year now. Being a diesel mechanic/ service guy at the same time. My tools have been dropped, hit, ran over once, in ran and all kinds of conditions. Works like I bought it yesterday. Never once gave it back to the tool guy to fix. Snap on has lost a lot of it touch in the tool world besides ratchets.
@Ma77riK3 жыл бұрын
@Nathan ive used my first gen high torque 1/2 impact since the fuel series first came out, with every day use at my auto shop mind you, ive also had the 3/8 stubby since it came out and it hasn't missed a beat, also running the same batteries i bought with each kit
@TheBenjammin3 жыл бұрын
Snap on should be competing with ryobi or B&D. Milwaukee is on a whole nother level.
@Shoptoolreviews3 жыл бұрын
You said it. Thanks for watching.
@devonkremer40623 жыл бұрын
Not a particularly a ryobi fan but just know they have the same parent company as milwaukee😏
@chrisquas41133 жыл бұрын
True but Milwaukee and ryobi are two completely different tool brands in terms of durability And quality. Don’t get me wrong ryobi is pretty decent.
@legendarypillow14503 жыл бұрын
@@chrisquas4113 his point was snap - on quality is comparable to ryobi
@josephwaldner39772 жыл бұрын
@@legendarypillow1450 personally I'd say Black & Decker is more their competitor.
@niteninja01333 жыл бұрын
I'm not sure anyone asks how the Milwaukee compares to snap on when everyone knows Milwaukee is the best around
@nuclearexplosion58413 жыл бұрын
Enter snap on, dewalt, IR, etc fanboys
@juanc51493 жыл бұрын
Here is the new Milwaukee mid torque vs Makita’s mid torque. kzfaq.info/get/bejne/nNieeJRypp-Ziok.html Best around? Eh? Notice how the Makita one? Notice that?
@juanc51493 жыл бұрын
@jeongja2 Must of missed the part where Makita was the better performer.
@kartboarder22g173 жыл бұрын
@@juanc5149 I need to get into this conversation. I think Makita and Milwaukee are the best for your money first thing. I tend to lean Milwaukee though, but really can't knock Makita if your into that brand either. First off, the video you shared is tightening power. Wish he would have reverse threads to show loosening power, because tightening isn't always needed at above 250ft-lbs. Loosening is more important. Also the way its designed within, loosening and tightening is not always designed the same within the tool, there are many little secrets to make the tool more powerful in loosening than tightening. Finally I'll say this, these both perform pretty dang close in the tightening shown and are the top tools, back to my first comment. Yet, an HO battery was not used on the Milwaukee, and I'd put money on it, that a 6ah HO would change the outcome. Not sure if Makita has an HO equivalent, but, I believe not.
@Shoptoolreviews3 жыл бұрын
You're just trying to start the brawl. :) Thanks for watching.
@SabrinaSt1986 Жыл бұрын
Upgraded from an older 18v kit. kzfaq.infoUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.
@youtubeuser54243 жыл бұрын
Oh man, you’re about to hurt some strap on fanboys feelings with this video but that’s great!👍🏼
@Shoptoolreviews3 жыл бұрын
I really don't intend to hurt feelings, but I do want the data and truth to be out there. Thanks for watching and commenting.
@CP-ok1gv3 жыл бұрын
☠️ 😂
@Enrightauto3 жыл бұрын
Fanboys on both sides too much hate. Who cares what tools we use as long as the job gets done and we like the tools. I use both Milwaukee and snappy they both work great
@tmillner06823 жыл бұрын
I'm one of them, my ct9010 is on the way... Not happy after this review. Guess I'll be getting the milwaukee too
@Enrightauto3 жыл бұрын
@@tmillner0682 ehh who cares man if it works for what you need doesn’t matter. My snappy dealer is great and has great service. Unlike what they said in the Video you cannot return your Milwaukee tools to Home Depot for warranty unless you buy Home Depot’s separate warranty if it breaks you have to mail in to Milwaukee and wait for repairs. It’s a pain and you are without a tool. My dealers Cornwell and snappy give me loaners if I’m out a tool
@niteninja01333 жыл бұрын
You see the snap on is a huge waste of money, I'm not sure why anyone would ever buy them. Milwaukee is always the way to go
@Shoptoolreviews3 жыл бұрын
Some would disagree, but it does seem to be an easy choice. Thanks for watching.
@weduhpeople85043 жыл бұрын
It’s because you can just tell your Snap-on guy to put it on their account and he’ll show up weekly to collect his payment. Most mechanics are on the hook for thousands of 💵 for their overpriced tool boxes. Mechanics have been brand brainwashed by them for years but many are switching to Milwaukee.
@dakotataylor79093 жыл бұрын
@@weduhpeople8504 snap on makes a great 14.4 line. It's overpriced yes but the ct761 is legit worth every penny. The 18v line needs to get revamped. It's been unchanged basically for years and is way behind the time.
@jonnylong79273 жыл бұрын
It's cause you can buy the snap-on on a payment plan, and you also have the truck coming to the shop weekly to take care of any issues, and also the snap on guy will usually help you out when you get into a bind. The Milwaukee is better I would say but you don't get a dealer who bends over backwards for you when you buy milwaukee.
@cosminion13273 жыл бұрын
I think it depends on the product, for power tools I don’t touch snap on, matter of fact I actually go with matco (and would love to see a head to head of that) however if you look at some of the rounded head technology for example snap on out performs the other brands. You just gotta research and see what’s better. For the ratchets I also personally prefer snap on, and I’ve had a chance to use mac matco and snap on for all 3 however that’s a personal preference, all 3 are good.
@bb2status3 жыл бұрын
The Snap-on impact is a turd considering how expensive it is.
@Shoptoolreviews3 жыл бұрын
That's one expensive turd. Thanks for watching.
@timm59703 жыл бұрын
But snap-on “created a monster”. They said so on their flyer. Gtfo strap-on
@billyhighfill3 жыл бұрын
🤣🤣🤣🤣🤣
@kohlmunsanders59193 жыл бұрын
@Nathan and Milwaukee will do the same thing to it
@brockbrowning6023 жыл бұрын
Was looking through same flyer and compared it to Milwaukee and showed my Snap On guy and he didn't know what to say.
@timm59703 жыл бұрын
@Nathan if you are questioning the durability of the store guns I will let you know I have a dewalt 1/2 I use everyday. That thing fling across the shop on the regular. Falls off the lift, Sock goes one way, battery goes another, and the gun soars through the air spinning like a ballerina only to crash into the ground like a meteor. And with that said ive never had any issues with the gun. However, a fellow tech has the snap-on counterpart which is currently being rebuilt and he never drops his gun and doesnt put it anywhere near the abuse I throw at mine
@justinmartin88873 жыл бұрын
Lol I seen that on the flyer they have me. We pretty much have every main cordless brand in our shop except snap on. Their hand tools are great; cordless tool are the laughingstock of the USA
@melsmobileservices42233 жыл бұрын
Boy am I glad that I became a mechanic in the last decade. Milwaukee is just eating Snap-on's lunch in the schoolyard & giving out money to the poor kids. Just the warranty alone would make me switch but to save 5 hondo & beat the specs, its a no brainier! Also don't forget about the other tools in Milwaukee battery platforms......I could build you a house & fix your car & still have money left to buy you dinner!🤣😂🤯
@Shoptoolreviews3 жыл бұрын
You are correct, Milwaukee is killing it with their impacts and other power tools. They continue to innovate as well. Btw, since you're buying dinner, I'll take a Porterhouse Medium with garlic butter. Thanks for watching.
@melsmobileservices42233 жыл бұрын
@@Shoptoolreviews anytime your in Greensboro, NC ......just call me😊
@jacob.s36193 жыл бұрын
It does make it unfortunate for those who have heavily invested into snap-on due to Milwaukee not being around. Myself and many other snap-on mechanics I've worked with all agree that you don't blow your money on any of there 18volt range. I have the 14.4v range which iv been extremely happy with, but even us fam boys know that Milwaukee is king of the brushless game.
@christianhoopes31343 жыл бұрын
Team red baby
@90loneeagle3 жыл бұрын
Snap on just got Owned, bruh, Milwaukee took his dignity and lunch money...
@Shoptoolreviews3 жыл бұрын
Lol, very true. Thanks for watching.
@projectskylinegtr3 жыл бұрын
Milwaukee is the king of cordless, I picked up a set years ago and for the price it smokes anything my other friends have from snap-on
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@thrillhunter98973 жыл бұрын
Not only did Milwaukee remove the nuts it did it so effortlessly it's unreal while a snap on had to hammer away for a long time
@Shoptoolreviews3 жыл бұрын
Very true. Thanks for watching.
@sophiasocal68 Жыл бұрын
If ONLY I could get other things to hammer away for a long time🤣🤣🤣🤣🤣 (Sorry- couldn't resist)
@theitalian5563 жыл бұрын
Snap On Leading the way in over priced tools! 😀
@Arthagnou3 жыл бұрын
there is also something to be said about longevity of the product. While this cannot be tested here.
@Shoptoolreviews3 жыл бұрын
Right on! Thanks for watching.
@theitalian5563 жыл бұрын
@@Arthagnou You have a point there. While thats also puzzling Im not sure why there would be a 1 yr warranty if they make a long lasting product?
@stinkwink6953 жыл бұрын
@@Arthagnou Yeah the warranty says it all. They are both Chinese one just comes with a 1000% profit margin.
@marcharris41763 жыл бұрын
Yep
@ogarci00323 жыл бұрын
Snap on is getting their behind kicked so badly in the impact game that they invented their own spec “true torque” or some boloney like that 🤣
@Shoptoolreviews3 жыл бұрын
That, they are. Thanks for watching.
@buckhorncortez3 жыл бұрын
But boloney can be good. You smoke it for about 2 hours, put some barbecue sauce on it, put it back in the smoker for an hour and you have some fine sandwich makings...
@stinkwink6953 жыл бұрын
All the generic brands are lising INCH pounds on the box now so they can have a bigger number.
@FloorItDuh3 жыл бұрын
Same thing as "nut busting torque." It's all marketing wank for suckers either way. Buy what you like.
@waynelonealjr80493 жыл бұрын
@@buckhorncortez that's pretty funny😂👍
@skyhop3 жыл бұрын
It's amazing how far behind snapon is. Almost every mid torque on the market from a decent brand can perform at or above that level. At least they're honest about their specs.
@sophiasocal68 Жыл бұрын
Same for roll carts. S.O = $1970.00 UG=$549.00 I would have to wear out 3.5 US General carts to every 1 snap on.
@rickywoods3101 Жыл бұрын
But none hit harder than snap ones new high torque 1/2 inch impact. I'm buying one this week after comparing them on the job
@charles-davidberube117410 ай бұрын
@@rickywoods3101milwaukee high torque hits 1600 ft/pd
@rickywoods310110 ай бұрын
@@charles-davidberube1174 that's awesome if it actually hits that. I know harbor freight 3/4 claims 1440 and it's not even close . I use to work on impacts and you have to put it on a Skidmore tester to know for sure
@boomsoon863 жыл бұрын
Not shocked. Snap-On getting exposed. Love it. Lots of tears over this video. Mechanics are crying right now cuz they still owe Snap-On and Mac 30k.
@Shoptoolreviews3 жыл бұрын
Very true. Thanks for watching
@mmholling873 жыл бұрын
I own around 40k of Snap-On tools and don't owe a penny and I've only been in the field for 10 years. Most guys spend more money on cigarettes, fast food, and energy drinks than tools. It's all about priorities.
@jamesmackay35493 жыл бұрын
Been in the trade for 30 years, no question, Snap on "had" good tools at one time. No quality anymore. Now only MAC tools for durability and cost for me. One of the guys here have a Milwaukee impact, it does hit harder. Getting that much power out of something so small is very impressive. I want.
@mrmartin71312 жыл бұрын
😂😂😂
@Joesf-gd4kw3 жыл бұрын
Honestly I own both brands but at the end of the day Milwaukee is always my go to
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@civichbc3 жыл бұрын
This is a no brainer which one to pick!
@Shoptoolreviews3 жыл бұрын
It seems that way.
@robe50003 жыл бұрын
Yeah, which ever battery platform your invested in.
@peter22133 жыл бұрын
@@robe5000 tbh it’d probably be a better investment just to discard you snap on batteries and just buy Milwaukee just bc the price and the terrible warranty on the snap on
@giovanysantiago58923 жыл бұрын
I don't get how this StrapOn fanatics out there waist all this money on overpriced garbage power tools from StrapOn.
@lim30063 жыл бұрын
@@giovanysantiago5892 I’m a Milwaukee fan myself, but to be honest, I think one of the reasons people still buy the snap on is because a lot of the times, they can just put it on an account, and pay overtime. It’s also sometimes convenient for some people too. But the price difference on the Snap on, and Milwaukee if day and night.
@btchllama3 жыл бұрын
My snap on dealer has learnt I'm a Milwaukee power tools guy, he still has fun saying things like "ahh that's because you don't want that much power". Snap on makes great wrenches and spanners, but I wouldn't make a fuss about anything else they sell. Great vid
@Shoptoolreviews3 жыл бұрын
Maybe you should show this video to your Snap-On dealer. lol. Thanks for watching.
@franksikorski53903 жыл бұрын
I have the high TQ Milwaukee. I have ran into a few occasions where it wouldn't break a bolt loose. The NEW Snap On ct9075 I borrowed from a co-worker DID break said bolts loose during the few times my gun wouldn't. Its not rated near as high as my Milwaukee, so I can say their 1/2" drive is superior. I've experienced it !!!
@btchllama3 жыл бұрын
@@franksikorski5390 and I HAVE experienced the OPPOSITE of that situation at MY work. Not sure what your going for here. But you sure gave me a laugh.
@franksikorski53903 жыл бұрын
@@btchllama , not sure what “game a laugh” means, don’t speak that language. But I know what happened because I was the guy running the tool! I own the Milwaukee, so I’ve got no incentive to promote snap on. Just calling it like it was.... and if you’ve experienced the opposite, I would wager that it was the older snap on gun not the newest one that they have. Again, I’ll restate.... I’m a Milwaukee guy, have lots of their tools and love them. But I’m not going to lie about what’s happened on more than one occasion. We also tried a friends Milwaukee just to make sure it wasn’t something with mine or the battery, didn’t change anything. I can see this is one of those typical scenarios where your tool is the greatest, and all others are junk, especially more expensive tools LOL. I got nothing against snap on..... they have good tools, just expensive. But the Milwaukee, Dewalt, Ingersol and others are so close on power, any one will serve you well.
@davidfoster53213 жыл бұрын
@@btchllama yeah...I was extremely underwhelmed with snap on impacts...dude's smoking some good stuff...
@MrGamer-lz6ci3 жыл бұрын
Snap on needs to take a backseat when it comes to brushless tools honestly
@Shoptoolreviews3 жыл бұрын
In this case, for sure.
@MrGamer-lz6ci3 жыл бұрын
@@Shoptoolreviews Yeah but in much more than just this case though
@jascospeed3 жыл бұрын
Snap on just needs to dump their power tool line and give up. They can't even beat Milwaukee's 12V tools using their 14V tools. The fact Snap on now sells Milwaukee power tools out of their truck says it all lol .... Just stick to hand tools Snap on, expensive but still good.
@MrGamer-lz6ci3 жыл бұрын
@@jascospeed Couldn’t said it better myself
@711slimshawny3 жыл бұрын
@@jascospeed i own both and yes the milwaukee has more power for sure. I just wish milwaukee would come out with a rocker trigger like snap on. working on cars its just so much more convenient having a rocker switch. i do like them both though for certain things. im also talking 12v and 14.4v to be clear.
@ryanotis3 жыл бұрын
I feel like the most amazing part of this test is that a 3/8" anvil doesn't explode with that much torque.
@Shoptoolreviews3 жыл бұрын
You and me both. It's amazing how much abuse these little anvils will take. Thanks for watching.
@kyle88ase Жыл бұрын
Shit I can send you a pic of my 3/8 anvil on my 9010. It has sheered right off. My coworker has had two 9010 anvils break. i just picked up the Milwaukee today, going to put it to the test.
@nickthompson18073 жыл бұрын
Just ordered both mid torques and the 3/8 compact. Been using the same 2654-20 for 6 years in the diesel shop. From MY personal experience you just can’t beat the performance,warranty, and the reliability. Love the videos. Always some good content
@Shoptoolreviews3 жыл бұрын
Thanks for sharing. That's awesome that it's worked that long for you. You'll love the new impacts.
@sophiasocal68 Жыл бұрын
Nick, appreciate your input. I'm returning to "shop life" after a 10 year break (trucker- mechanic) Been looking at cordless impacts and already found one "flaw" I'm going to stay away from by watching these videos.
@MarcosBuenrostroLifestyle3 жыл бұрын
Milwaukee has a better design, you can use the batteries for multiple power tools, it’s stronger, and offers a lot more overall for a better price I don’t see how you can go wrong buying the Milwaukee
@Shoptoolreviews3 жыл бұрын
We would agree, along with many others. Thanks for watching.
@PorkyHontas3 жыл бұрын
Milwaukee has come along way in the past decade or so. Started out as a fairly decent mechanic's tool to a top of the line tool.
@Shoptoolreviews3 жыл бұрын
They're moving up. Thanks for watching.
@pophamlarry3 жыл бұрын
Milwaukee has the strongest impact tools I've ever seen and used..... they're on top of the game...... the absolute king of power....
@skotsephrenia13 жыл бұрын
The ingersoll Rand is more powerful
@nuclearexplosion58413 жыл бұрын
@@skotsephrenia1 no it isnt
@boosted2.4_sky3 жыл бұрын
Not sure why people think one category is the only defining factor if a tool has 30 pound feet less is it really that much more inferior? Especially if it's a $150 cheaper ....I think I'll take 30 less pound feet and live without Milwaukee hype... and have more money
@juanc51493 жыл бұрын
Milwaukee fan boys are like a cult. And now that 2767 has been skidmore tested. It turned out I was right along. It’s got maybe 10 to 70 more ft lbs then the Makita or dcf899. And that can be explained by battery type used on the other brands. A DCF899 with a 9 ah FlexVolt is more powerful than a 2767 with regular xc battery. The reason is because people just believe stated specs on the box. See the 2767 barely reaches its claimed fastening torque of 1000. Where as the other two brands exceed their fastening torque of 700 or 750 ft lbs by a few hundred ft lbs. putting them all much closer. Ingersoll Rand is way more powerful and it’s only a matter of time where I’ll be able to post concrete proof of this.
@Jtwizzle3 жыл бұрын
@@juanc5149 singlecams ftw!
@gotuzzo713 жыл бұрын
I have been converted! I have nothing but Snap On in my toolbox but I'm tired if their insane pricing. I have been looking at Milwaukee for some time, this video helped me decide. Thanks
@Shoptoolreviews3 жыл бұрын
Let us know what you think when you switch over. Thanks for watching.
@JoMariSmokinLocos2 жыл бұрын
I have been a Snap-On buyer for 20 years and have paid a lot of money in tools, especially battery impacts. I just bought the whole Milwaukee set and i will never trade them in. I'm totally happy with these bad ass impacts. I use them alot on semi engines. Worth the buy.
@Shoptoolreviews2 жыл бұрын
That's honest and valuable feedback right there. Thanks for watching.
@JoMariSmokinLocos2 жыл бұрын
@@Shoptoolreviews yessir, you're welcome.
@bonbon98993 жыл бұрын
Simply for the production value and great info alone , this channel deserves waayyy more subs! You got one more today, thank you!
@Shoptoolreviews3 жыл бұрын
I appreciate that a lot. Thanks for the sub and thanks for watching.
@giovanysantiago58923 жыл бұрын
For the price of that StrapOn impact, I would've bought the new mid torque kit with 2 batteries and charger, high torque impact, and the new M18 stubby compact impact that's 3 Milwaukee impacts with a much much better warranty for about $870 -$880 depends where you buy them from.
@Shoptoolreviews3 жыл бұрын
That's a great point. 3 impacts or just 1? That's a pretty simple answer. Thanks for the input.
@Tain9503 жыл бұрын
The Snap On looks really cheap reminds me of the back and decker.
@Shoptoolreviews3 жыл бұрын
It does look a bit dated. Thanks for watching.
@cdstruckandoutdoor72193 жыл бұрын
Thanks for the good review. I've had snap on cordless tools for the past few years but recently sold them all and switched to Milwaukee, and won't ever go back. It's a no brainer on Cost, warranty, and power. However, I will say snap on has one advantage... $20 a week vs. paid in full at once
@Pro1er3 жыл бұрын
You do realize that Home Depot offers a credit card, right?
@cdstruckandoutdoor72193 жыл бұрын
Ok?
@Pro1er3 жыл бұрын
@@cdstruckandoutdoor7219 You can pay monthly on a Home Depot credit card too.
@cdstruckandoutdoor72193 жыл бұрын
@@Pro1er ok?
@dustinpomeroy88173 жыл бұрын
@@cdstruckandoutdoor7219 he's saying if you're gonna go ahead and extend credit for something you could just got to Home Depot and spend the same 20 dollars a week.
@scjeepHO3 жыл бұрын
I bought the 3/8" and 1/2" Snap On when the last versions came out. They were VERY Expensive and our newer Milwaukee stuff at work is all over my snap on stuff by a big margin. The Big 1/2" Milwaukee I have at work is an absolute BEAST.
@Shoptoolreviews3 жыл бұрын
You're exactly right. Thanks for watching.
@corin1643 жыл бұрын
I've been watching several channels re mid-range impact wrenches and how the compare with each other. Without a doubt the M18 Milwaukee Impact Wrench had routinely beat out the competition in all instances. So two days ago I ordered the 1/2" version (I only have 1/2" impact sockets) of the Milwaukee. My only issue with Milwaukee is that I had been heavily invested in another tool battery platform, but despite that, I had to go with the better tool. BTW, this will be my first M18 tool.
@eloomin3 жыл бұрын
Here in Australia. Milwaukee is king. Best value for money, best warranty and the best tool. Why would you buy anything else.
@markgrehlinger7117 Жыл бұрын
THANK YOU for putting the model numbers up front and center when you first start your review! All the talk about the great value of a Milwaukee tool means nothing when they have so many of the different models and you don't know which one the guy is actually reviewing. They're all red, they all look pretty much the same the the model number, means everything! 😊
@stefanczechorskidds84353 жыл бұрын
That wasn't even a contest ; the Milwaukee hardly "broke a sweat" ! Milwaukee wins ....... again.
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@bch55133 жыл бұрын
I’ve got a 1/2 “ mid torque fuel and it’s a beast
@gabrielsanchez85593 жыл бұрын
Same here got it a few months ago my nephew got the snap-on everytime he need to take off the axels of the f 350 he goes to my toolbox for my M18 1/2 gen 2.
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@salvadorespinosa7353 жыл бұрын
I have the 1/2” high torque and that thing is powerful AF!
@xavierperez77333 жыл бұрын
I am an automotive technician and my tools are Milwaukee and they have worked very well for me.
@Shoptoolreviews3 жыл бұрын
Thanks for sharing. Thanks for watching.
@joshuaj11103 жыл бұрын
I'm a little newer to the cordless game, picked up a normal Mil m18 drill a few years ago and thought it was all I'd ever need. Then I picked up a fuel impact driver last week and it blew me away. Holy shit lol just picked up the mid torque wrench Yesterday, can't wait to bust some nuts! 😂
@Shoptoolreviews3 жыл бұрын
Very true! That new mid-torque is an awesome impact. Very useful. Thanks for watching.
@DoubleD20033 жыл бұрын
I’ve had Dewalt and Makita never Milwaukee. After watching a few videos I’m giving Milwaukee a shot, seems to outperform everything it goes up against!
@Shoptoolreviews3 жыл бұрын
You wouldn't be disappointed. Thanks for watching.
@kongxiong60052 жыл бұрын
I I just collecting the set myself. Almost went with Makita but instead went with the fuel line. Expensive but haven't been disappointed yet. Wait for deals. I just picked up the mid torque half-inch with a 5 amp battery for only 220
@mikemorgan50153 жыл бұрын
I'm amazed at the metallurgy! 3/8 anvil over 500 ft/lbs. That's crazy.
@Shoptoolreviews3 жыл бұрын
It's impressive what they're getting from these anvils. Thanks for watching.
@txmuddigger3 жыл бұрын
And I am another - 30 year diesel tech with both a 72" box at the shop AND service truck full of Snap-On hand tools but Milwaukee cordless tools are where it's at. I don't think anybody in my shop (or the hands I run into in the field) still uses Snap-On cordless guns anymore. It's not about hurting "fan boys" feelings, its professionals using what works and Milwaukee cordless tools put in the work!
@rsWez20003 жыл бұрын
That new snap on look like a low end tool but cost the most madness, sold my sand on and moved to milwaukee 2 years ago and I haven't looked back
@Shoptoolreviews3 жыл бұрын
Like so many others. Thanks for watching.
@vbriagas973 жыл бұрын
Loved every second of seeing Snap on get its ass whooped 🤣
@Shoptoolreviews3 жыл бұрын
You said it!. Thanks for watching.
@iantuck63643 жыл бұрын
Great video. I am surprised by the results. I have a lot of Milwaukee tools but mostly because Snap-On is too expensive. Obviously more expensive doesn't mean better.
@Shoptoolreviews3 жыл бұрын
Exactly right. Thanks for watching.
@trwsandford7 ай бұрын
I just picked up the 2962-20 bare tool for $249.00 at Homer's despot. What a deal! Couldn't be happier. That's the 1/2" version of this one. I have plenty of Milwaukee, so batteries and charger are already in house.
@shynebull3 жыл бұрын
Lots of tool guys doing reviews out here but I like your style. Great work! I'm a service tech on arial equipment and I scratched my head for awhile over Snappy v Milwaukee and gladly ended up with Milwaukee. Have most of the M12 fuel stuff and the 1/2 plus 3/4 M18 fuel impacts. All are beasts. Just had to send my 3/4 back after 2yrs and had it back after 2wks totally free of charge. Great stuff with great service and warranty.
@Shoptoolreviews3 жыл бұрын
That's great to hear, and thanks for the kind words. So glad the M12 and M18 tools are working for you. Thanks for watching.
@andrewscott88923 жыл бұрын
Just a small correction, it's been a little longer then several decades, Snap On was founded in 1920 making it a century of operations this year
@Shoptoolreviews3 жыл бұрын
Yes, I realize this. I know it's been 100 years, but their power tools have not been around that long. Thanks for the feedback.
@andrewscott88923 жыл бұрын
@@Shoptoolreviews you are right on that point, and I knew you knew just writing it in the comments for others. Thanks for another great video
@stevendohm33993 жыл бұрын
Anything hand tool I’m die hard snap on it Matco, when it comes to electric impacts I’m a die hard Milwaukee fan, other than the electric ratchets. I really like the snap on electric ratchets more than the Milwaukee in that case. I have not tried the 90 degree Milwaukee impact ratchet yet but I think Milwaukee is the only brand that makes that as far as I know. It’s all personal preference.
@Shoptoolreviews3 жыл бұрын
It is personal preference, you are correct. However, it becomes harder and harder to prefer something, the less it performs and the higher the cost. Thanks for watching.
@fqcraigus2 жыл бұрын
That is night and day!! I’m a hgv mechanic and use snap on hand tools and air tools but I’m starting my Milwaukee cordless adventure and videos like this reinforce why I’m going Milwaukee
@devonkremer40623 жыл бұрын
Only snap on power tools I like are there Cordless ratchets and the ct761 mainly cuz of the trigger even though it's kind of weak
@Shoptoolreviews3 жыл бұрын
We would agree with that. Their cordless ratchets are nice and we love the rocker switch on the 14.4v little impacts. Thanks for watching.
@jaysdub3 жыл бұрын
This is a great review and it looks like the Milwaukee kicks the crap out of the snap on like most of their tools. But does anyone have any real experience with this? I am an auto mechanic and have an m12 stubby 3/8” impact that is strong enough for almost anything. If it can’t get it off, it is probably an application for the 1/2” m18. With my m12 I can remove and also install engine manifolds, pulleys, brackets and small suspension stuff. These high power 3/8 tools might not be so great for the smaller stuff. That is why they need an adapter for the tests. Just get a 1/2” wrench for the big stuff.
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@bertjohnson833 жыл бұрын
Proof that Milwaukee is so much more of a superior tool , thank for this review 🔥🔥🔥
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@wasntme36513 жыл бұрын
I’ve been a Milwaukee fan for years. Especially the Brushless Fuel series.
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@dq71432 жыл бұрын
I used to use a Harbor Freight corded impact wrench to R/R lug nuts for many years. Changing to the Milwaukee Mid-Torque battery operated impact wrench was like heaven.
@jayzayas34253 жыл бұрын
Snap on trash and design looks outdated and it’s probably stupid over priced
@casemodder893 жыл бұрын
Like every snap off shit is...
@TaintedMojo3 жыл бұрын
Internet search shows about $510
@kartboarder22g173 жыл бұрын
@@TaintedMojo So you can buy two Milwaukees for the price of one snap on.
@RyanFixesCars3 жыл бұрын
Overpriced is an absolute understatement. Trust me.
@Shoptoolreviews3 жыл бұрын
@TaintedMojo for $499 you only get the CT-9010 and 1 battery. You don't the charger or the 2nd battery. The Milwaukee is $419 for the tool, 2 batteries, and charger.
@jascospeed3 жыл бұрын
You take the Snap on logo of that impact and looks like a Bauer from harbor freight. Serious looks cheap, bister buttons sticker looks like it'll come off and no rubber overmold protection on the back. Snap on just give up and stick to hand tools. Asking $800 is insulting for this. But Strap On boys will buy lol ...
@Shoptoolreviews3 жыл бұрын
Wow, that's pretty harsh, but we understand. :) Thanks for watching.
@leonardhall72033 жыл бұрын
@@Shoptoolreviews he's right even the battery looked cheap.
@dave-huston-dublin3 жыл бұрын
20 years a mechanic , I just bought the Milwaukee M18 1/2 inch nut gun, Its really good, Cant believe the opening power it has.
@Shoptoolreviews3 жыл бұрын
Congrats. Glad that it's working well for you and thanks for letting us know. Thanks for watching.
@dave-huston-dublin3 жыл бұрын
@@Shoptoolreviews Thank you, I was so impressed I bought a Milwaukee Ratchet last week.
@apa76112 жыл бұрын
I got that Milwaukee one for 219.00 with a free 5AH battery! Got a lots of Milwaukee tools for work. Good stuff
@johnenright49693 жыл бұрын
Thank god for fast forward!
@Shoptoolreviews3 жыл бұрын
We know what you mean. We can get boring. Thanks for watching.
@srvdean30243 жыл бұрын
This guy talks a hell of a lot without saying anything.
@Shoptoolreviews3 жыл бұрын
Truly appreciate the views and the comments. Really helps with the algorithm.
@AM-nn9sv3 жыл бұрын
I enjoyed this comparison. The only upside to Snap-On is the ability to make relatively small payments weekly and put the tool in your hand now. 25 bucks a week for three months doesn’t seem harsh, until you add it up. I see the following as more of a preference rather than a criticism; I like to the point, @projectfarm comes to mind. He gets it done quick. Over a million followers seem to agree as well. All the best to you and Merry Christmas! Subed and liked. 👍
@Shoptoolreviews3 жыл бұрын
Thank you for the sub and the watch. We like PF too; however, we do things a little different. After all, we don't want to be exactly like anyone. Thanks for watching.
@rickyturner71 Жыл бұрын
Your better off just buying a cheap Hercules impact wrench it'll put perform the snap on by far 😂😂 and it's probably about 100 bucks
@k3anureev3s183 жыл бұрын
What’s crazy is everyone compares this, but snap ons impact is designed to not tighten things that much for the simple fact you start breaking bolts and going over torque requirements
@henrymorrey41503 жыл бұрын
Milwaukee makes the best electric tools on planet earth hands down
@Shoptoolreviews3 жыл бұрын
They are definitely leading the charge with impact tools.
@burgerbirger22213 жыл бұрын
Maybe "snap-on" should change their brand name to "rip-off"😁
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@TAGDIESEL3 жыл бұрын
Owner of both. For the money Milwaukee has it going on. Love my snap on gun but I won't lie to you , my go to in my toolbox is the Milwaukee lineup that I have now. Only time will tell if they will last but so far I'm impressed.
@Shoptoolreviews3 жыл бұрын
Let us know if you have any Milwaukee failings, or Snap-On. Thanks for watching.
@jenniferjelke25026 ай бұрын
Considering that this Snap-on model is rated for 325ft. lbs., it went well above and beyond that loosening a 400ft. lb. torqued bolt. We should also consider that despite the welded on adaptor, which by the way reduces the overall performance, a 3/8” impact gun isn’t designed for impact sockets this big.
@MrLodgey813 жыл бұрын
Fisher price vs milwaukee 😂
@Shoptoolreviews3 жыл бұрын
Ouch, that hurts. lol. Thanks for watching.
@trancextend3 жыл бұрын
Rooting for Milwaukee. Snap on can hit the curb. Thats my model. Lol
@ogarci00323 жыл бұрын
You can say that again 🤣🤣🤣
@Shoptoolreviews3 жыл бұрын
Lol. That's pretty funny. Thanks for watching.
@Orefamilylawncare3 жыл бұрын
I had snap on ni cad 1/2 and 3/8 impact wrench and had zero issues ever. When snap on came out with the"monster lithium" 1/2 and 3/8 set I got them both. The first year my 3/8 was rebuilt 5TIMES and my 1/2 was rebuilt 3TIMES!!!!!! Sold the both and got milwaukee 1/2, 3/8, light, and grease gun no issues at all. I would never go snap on again 🤷🏼♂️
@Shoptoolreviews3 жыл бұрын
You are not alone, and that's very sad that Snap-on is not doing better with power tools. Thanks for watching.
@leea.37722 жыл бұрын
What I've noticed is the 1/2 Milwaukee impacts lose a decent amount of power when used regularly. They don't have the beefy hammers inside that the snap on does. However 18v Milwaukee has always been ahead on power. (When new at least). The 14.4 line is a pretty solid line though. I chose the 14.4 line for work over the m12 options. 18v though have always bought Milwaukee. I've also noticed the battery play and flexing of the tool with the Milwaukee but hey 5 year warranty and 1/2 price of snap on on so hard to complain really.
@derekbross69583 жыл бұрын
I’d like to see the new Ryobi 1/2” Brushless against the m18 fuel mid torque
@samin903 жыл бұрын
The specs seem identical to the Milwaukee, though it is a bit longer. I'd like a teardown to see how similar the internals are
@TaintedMojo3 жыл бұрын
Good question, they’re both subsidiaries of TTI
@Shoptoolreviews3 жыл бұрын
I'm pretty sure the Milwaukee still takes it, but Ryobi has definitely stepped to the plate. Thanks for watching.
@looseballs19663 жыл бұрын
@@Shoptoolreviews Yes Ryobi has, I have some older ryobi stuff kicking around and for the price they weren't too bad but now they seem like they want to earn the more top end consideration,,,,to them I say good deal kick A-- there's room at the top for one more at least.
@kaox443 жыл бұрын
It's not even close, how embarrassing for Snap-on.
@Shoptoolreviews3 жыл бұрын
No doubt. Thanks for watching.
@rpvitiello3 жыл бұрын
Just replaced all my old snap on power tools with Milwaukee. Looks like I made the right choice!
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@SteelCity5703 жыл бұрын
I got rid of all my snap on for Milwaukee, even my snap on rep knows they can’t complete with Milwaukee price or performance
@Shoptoolreviews3 жыл бұрын
Not a bad idea, and others have done the same. It's very sad, actually. Wish Snap-On would step up their power tool game. Thanks for watching.
@josemendoza89133 жыл бұрын
I make the move from dewalt to milwaukee a little while ago, i’m making my mechanic moving from snap on to milwaukee, they’re so damn expensive, 800 for a jumper and broke and the third use, no way snap on
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@yenhan705eh773 жыл бұрын
Strap on is a bit late to the game and just now trying to play catch up. Lol
@Shoptoolreviews3 жыл бұрын
Yeah, I'm not sure that I understand what they're doing. I can understand late to the game, but whey release something underwhelming as well? And, you're the highest price. It doesn't make a lot of sense. Thanks for watching.
@blake19953 жыл бұрын
Yeah and then charge a 1/4 more for something that underperforms. What a joke
@canogaparque8183 жыл бұрын
@@Shoptoolreviewsthey rely on thier blind fan boys/loyalist to keep then going Doesnt help that in schools they get pushed on to the students with sone discount
@endebtedone3 жыл бұрын
I am not surprised Milwaukee beat the brakes off of Snap On. Weight, price, performance, warranty and looks Milwaukee has Snap On beat. I have BIG BERTHA - 1/2" 1000/1400 ft-lbs impact wrench and unless it is seized I can get anything off and do the work I need to do. I just picked up the 1/2" big brother to the 3/8" you tested just for the weight of the gun. BIG BERTHA wears you out after wrenching all day.
@AceSolomon943 жыл бұрын
Kinda pissed that you didn't test the mid torque beyond the 550 ft lbs torque test, but I know it's powerful as it is 😎 The 1/2 is my go to, thinking of getting a 3/8 version
@game4alaughman Жыл бұрын
Just ordered 1/2 full torque diy use, maybe should have just went for mid torque 😮
@PrimeHiFi Жыл бұрын
I work in aviation as an A&P mechanic. Never use any heavy duty power tools like impact guns. I have a toolbox full of snap-on hand tools which I love and will take to the grave. I have a snap on brushless drill and a snap on screw gun too. Love em, but if I were to redo my decision, I’d probably go Milwaukee. For light to medium duty work, snap on power tools are fine but if I were in automotive, you bet I’d take Milwaukee any day. Snap-on’s “heavy duty” power tools are abysmal for the money! Wow!
@Mattmazz773 жыл бұрын
I have a Milwaukee M12 1/2" stubby and it is actually a beast. It does lug nuts without an issue. Perfect portable emergency roadside assistance..lol.
@Shoptoolreviews3 жыл бұрын
No doubt! Excellend impact for keeping in the car. Thanks for watching.
@dcyamahatech3 жыл бұрын
I love snap-on 14.4 ratchets and the ct761. But the 18v stuff just leaves alot to be desired. My go to impacts are the m12 stubby and the ct761. Two areas id like Milwaukee to improve in are battery fit / durability and warranty. I know people who sent off impacts to be repaired only to be sent back in a million pieces stating moisture caused the failure and that would not be covered. Snap-on flat rate repair is actually a great setup. If your tool is outta warranty you send it in and for 125 they repair or replace the tool. I'd like to see Milwaukee do something like that.
@Shoptoolreviews3 жыл бұрын
Yes, the Snap-On flate rate repair is a nice service, although it can be complicated. I also agree, the 14.4V impacts are awesome with the rocker switch for fwd/rev. Thanks for watching.
@svn59943 жыл бұрын
Snap Ons warranty is hot shit and you're complaining about Milwaukees?
@dcyamahatech3 жыл бұрын
@@svn5994 yes I am... snap-on does have terrible warranty but Milwaukee has denied warranties on tools and aent it back in a box in a million pieces. 5 year warranty is useless if they wont cover the tool. If Milwaukee had a flat rate repair system itd be alot better is all I'm saying...I even stated in my original reply that snap-on 18volt line just isnt cutting it and I have Milwaukee impacts,drills,etc.. but if you brag on your 5 year warranty back it up.
@tombrady93856 ай бұрын
It’s not even an even comparison. Milwaukee is 600 ft lbs and SnapOn is 325 ft lbs..
@alexiangelatos21163 жыл бұрын
I love my milwaukee stubby impact. But I do think that adapster makes a difference even though its welded in. I can feel the difference when going from a chrome sockets to a impact socket. Impact socket vibrates less and will take off tighter bolts/nuts. Also.holding the impact with more force against the nut/bolt also makes it vibrate less and takes off bolts easier too. So if that welding extension is makes that socket vibrate more it deffinently will cause the readings to change.
@Fishing4Fish963 жыл бұрын
I agree, if you’re doing a comparison then you need to account for all variables. An adapter (regardless if it’s welded) is a variable. He shoulda just used the same socket. I don’t care much for Snap On impacts, but at least make the comparison fair.
@Shoptoolreviews3 жыл бұрын
The Snap-On is only available with a 3/8" anvil, and you can't find a 3/8" x 33mm socket. We can't use smaller fasteners because they won't hold up to this amount of power. Therefore, we welded a 3/8" to 1/2" adapter to a 33mm socket. The Snap-On is getting it's but kicked by a 2-year-old 12-volt Milwaukee that is less than half the price. It's not even close. Thanks for watching.
@absolutez3r0192 жыл бұрын
@@Fishing4Fish96 He did use the same socket with the welded on adapter, so that variable is a moot point
@7dioclau3 жыл бұрын
Milwaukee is in another level. Competitors need to catch up!!!! specially the truck tool guys for the $$$ they charge they should always be leading the way in all tool categories!
@Shoptoolreviews3 жыл бұрын
Exactly right. Thanks for watching.
@dustinpomeroy88173 жыл бұрын
I have the whole Milwaukee fuel impact line including the ratchets with the exception of the 3/4 and 1 inch and 97 percent of the time my go to is my Midtorque.The thing is just simply amazing strong enough to get almost all things loose but not so much that you are gonna accidentally break some shit.
@Shoptoolreviews3 жыл бұрын
Sounds like you have a great collection of tools. You are correct, that Mid-Torque is awesome. Since Milwaukee released the first Mid, when someone asks which impact to buy first, that's what I recommend. Thanks for watching.
@dustinpomeroy88173 жыл бұрын
@@ShoptoolreviewsHaha, FYI I'm getting to know my 3/⁸ stubby pretty well too ,I might have an addiction I'm not even a mechanic,but I do play one from time to time
@LIKEcommentANDsubscribe3 жыл бұрын
My high torque 1/2, mid torque 3/8, 5AH batt and 2 2AH batts, and 2 chargers combined cost less than the snapon 3/8 kit before taxes.
@Shoptoolreviews3 жыл бұрын
You are very right. Thanks for watching.
@jeffshannon5410 Жыл бұрын
My bank won't give me a loan for the prices snap-on!! Lol
@TheGettyAdventures3 жыл бұрын
As a diesel mechanic the break away torque is 100% more important. dealing with rusty crappy nuts and bolts the break away power is everything. much much easier torqueing up new bolts and fasteners when putting everything together.
@Shoptoolreviews3 жыл бұрын
You're exactly right. Thanks for watching.
@Okanagan483 жыл бұрын
First look, the Snap on looks rough around the edges, while Milwaukee looks well finished.
@Shoptoolreviews3 жыл бұрын
Right on. The Snap-on definitely looks like an older tool, and even the red color is more orange/pink than red. Thanks for watching.
@willagresham29783 жыл бұрын
This just hit me as to why reverse torque specifications are always higher than tightening. Makes sense to me. How does that compare with a properly stretched bolt?
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@asmautollc3 жыл бұрын
The only real complaint I hear about the Milwaukee versus Snap On and DeWalt from people who use them daily is the batteries. M18 batteries tend to be loose and can vibrate off the tool. M12 the tabs break. I agree, the M12 tabs suck, but the tools are great. Haven’t yet had any issues with my M18’s. They definitely bring the power. Was a little disappointed to see the Snap On underperform the Milwaukee by that much. Snap On does tend to understate their torque, and in other tools, performs closer to comparable Milwaukee’s. Not this time.
@justinsgr83 жыл бұрын
Snap on has been selling half ass stuff for years and years.
@josephkioski38273 жыл бұрын
But their hand tools are nice
@justinsgr83 жыл бұрын
@@josephkioski3827 specialty tools like the rock em sockems
@Shoptoolreviews3 жыл бұрын
Yes, it's outperformed quite a bit. If you use them both, you'll notice this, way more than the numbers show. You can see it in the video, the Milwaukee quickly breaks the fasteners free, and the Snap-On hammers on them for 6-8 seconds to break them free. Thanks for watching.
@IManOPERATOR3 жыл бұрын
On Thursday, October 26th, a federal court jury hearing the case against Snap-On Tool in the U.S. Eastern District of Wisconsin reached a verdict, siding with Milwaukee Tool. Documents associated with the verdict indicate the jury ruled Milwaukee Tool is entitled a "reasonable royalty" of $27.8 million. Milwaukee already won this no need for a video lol 🤘🏼
@IManOPERATOR3 жыл бұрын
@Giorgio Mumda cause I forgot 🤷🏻♂️
@Shoptoolreviews3 жыл бұрын
Thanks for watching.
@albertsewell8782 жыл бұрын
I have been buying snap on since the 80s , if not then I get Mac . I work on million dollar equipment, but I have never bought there cordless or air 1/2 inch impacts I have always felt the value was not there. No snap-on is not just a name ( but it's going that way) and the tools I do have of theirs is the best imo .
@sukhwang45542 жыл бұрын
I recommend snap on hand tools , milwaukee M12, Makita 18V if you can handle the battery cost. Long time using milwaukee, I realized it is only about the power. makita has enough power, light weight and better tool quality especially the way battery is fitted. However compact M12 is the number one top dog for automotive.
@Barnekkid3 жыл бұрын
For at least the very first bolt, he held the milwaukee longer than the snap on. Can't tell about the rest because they went to 8x video speed.
@Shoptoolreviews3 жыл бұрын
Yes, you are correct, on the very first fastener, we held the Snap-On for 3.5 seconds and the Milwaukee for 5 seconds. This was only for the first fastener. We caught this in editing, but we didn't reshoot because the torque rating was in range with the others and it was by no means that lowest number of the 10. This Snap-On is not even close in power compared to the Milwaukee. You can feel it in your hands. Thanks for watching.
@henryburke84263 жыл бұрын
Liked the video but really like the presentation. Clear, to the point and little criticism on either brand. A "test" as it were. Good job. Thank you. Subbed
@Shoptoolreviews3 жыл бұрын
Glad you liked it! Thanks for watching.
@andytsoi14653 жыл бұрын
Snap On fans are superb loyal to their brand but gotta live with the facts. So instead of getting the combo I paid $240 (gun), $130 (high output 3.0 & 6.0) all from Home Depot. So far I haven’t touched my 1/2” gun for 3 weeks in a full auto shop💪🏻💪🏻.
@Shoptoolreviews3 жыл бұрын
Great value buy. Thanks for watching.
@gjolinares233 жыл бұрын
That Snap On got wrecked.. but now Makita has a mid torque that is even stronger than the Milwaukee and it’s a great price.
@Shoptoolreviews3 жыл бұрын
Yeah, that new XWT17 Makita is a beast. We reviewed it too. Thanks for watching.