Рет қаралды 9,203
B2A-5 | Siemens NX 2007 Tutorial Assemblies | The Assembly Constraints (Fit, Touch/Align, Concentric, Center, Bond...) command is used to position components and assemblies dependent on each other, so that they always touch each other, for example, or have a certain spacing to each other, even if a part has been moved.
Surfaces, edges, points, axes, planes, coordinate systems can be selected and positioned dependent on each other.
The Pattern Component command makes it very easy to pattern components and subassemblies. Thus, screws can be easily placed according to the screw holes.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on KZfaq. (and about your subscription ;-) / @learnnx
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
The stp-file of the slider
learnnx.com/downloads
first tutorial: how to load the slider
B2A-1 ► • Siemens NX Tutorial | ...
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Foreword
00:00:25 Complement the assembly navigator
00:01:40 Fix component
00:02:33 Create assembly constraints
00:04:10 Show degrees of freedom
00:04:58 Create constraints Fit for the screws
00:06:23 Filter and modify assembly constraints
00:08:48 Fix parts foolproof
00:11:43 First conclusion
00:12:24 Further assemly constraints
00:12:36 Move components effectively
00:14:42 Constrain slider housing
00:15:07 Touch align options
00:17:30 Install half shell, touch align parallel
00:19:08 Install slide plate
00:20:33 Install screws in slider plates
00:22:21 Concentric versus touch align
00:25:45 Constraint center
00:34:41 Fix as group with bond
00:36:15 Working with edges and axes
00:40:42 Now follows the wedge
00:41:32 Anything missing?
00:43:16 Preview
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse