Siemens NX Tutorial | Part Families, create and save master and variants

Рет қаралды 1,064

Күн бұрын

PF-1 | The main topic "Modular Design" starts with the "Part Families" command.
This command allows you, to create variants of parts and assemblies, using spreadsheets.
The first course starts with a simple part that is to be created in different sizes. The storage locations for the master and variants are defined first. This is followed by the modelling of the master part, controlled by expressions.
These expressions are then entered into columns of a spreadsheet and filled with new values. In this way, variants of the master part in different sizes are created in a short time.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on KZfaq. (and about your subscription ;-)
/ @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
learnnx.com/downloads
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Preview
00:01:09 Create master part with parameter
00:04:00 Define storage directory
00:05:34 Define columns
00:06:57 Create table
00:09:51 Create variants
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse

Пікірлер: 14

@SMOENOVA Ай бұрын

very good!

@rahuljha5259 Ай бұрын

Iam eagerly waiting for next part

@vipulmahamuni409 Ай бұрын

Thank you sir i was suffering to learn for this lesson

@TicTacUAP Ай бұрын

Thanks for sharing, very good tutorial!

@rahuljha5259 Ай бұрын

Thank you so much for the series

@samirarad9362 Ай бұрын

Thank you very much, very useful

@ai_designdevelopment6252 Ай бұрын

Thankyou sir its an amazing method for repeat jobs

@miladmoghbel2906 Ай бұрын

Thank you so much

@RiverAntonio750 Ай бұрын

Very good tutorial

@LofEtmaz Ай бұрын

Very nice, thank you very much,

@viktorkrasnik2350 Ай бұрын

Thank you, everything is great! Please show a practical example of a small assembly: 1. Creating an assembly from the bottom up. 2. Creating an assembly from top to bottom.

@learnNX Ай бұрын

Oh yes, the two methods from the textbook. In fact, one or the other method is rarely used exclusively. In practice, it is always a mixture of both methods. But I will respond to your request later.

@katrhiknaidu1989 22 күн бұрын

@@learnNX the question above will help alot, when free kindly make a video on this

@learnNX 21 күн бұрын

Alfred E. Neumann works with NX? That's mad. 😀